IDEAPAD U310 WIFI PROBLEM

I have problem with my wifi it shows "No network found". . .I've done several troubleshootings already like refreshing our wifi modem, refreshing my ideapad to original windows settings, trying to disable and enable the adapter in device manager, tring to diagnose the adapater but still it doesn't find any network until now...I tried in my phone wifi is okay only my laptop cannot detect networks. I also tried the ALfa 3rd party wifi receiver connected in my laptop through USB it works. I don't know what's the problem with my laptop. Maybe the adapter or wifi card. Ihope you can help e on this .. . .Thank you and God bless

Update your drivers to this version provided by link below:
http://www.station-drivers.com/page/atheros_wireless.htm
Scroll down to the page like in the picture below and click the highlighted floppy disk icon to download. Make sure to select your correct operating system.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Similar Messages

  • Ideapad N580 Wifi Problem

    Hi I just recently downgraded my Laptop from windows 8.1 to windows 7 ultimate 64 bit. I launched it and downloaded the intel wireless lan drivers for it but now it says "the local area connection is experiencing driver or hardware related prolems" please help!

    Hi Corbinboy,
    As the Wireless LAN Support is enabled in BIOS and the driver is not installing. The only available option is to download the fresh copy of the driver from the below link and then while installing the driver right click on the downloaded file and select “Run as administrator” option to get it installed without any error.
    Drivers and software - IdeaPad N580
    Do post us back if the issue still persists.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Extremely high memory usage on ideapad u310

    Hi all,
    I've got a problem with my ideapad u310 touch running windows 8.1. When doing completely nothing (just staring at the desktop with no programs running) my laptop uses ~55% of ram. I find this extremely high, when i open a few chrome tabs and listen to some music, maybe open a powerpoint it even rises to 80+%. My Medion erazer laptop(also running 8.1) with 4GB ram uses ~65% with the same usage and ~35% while doing nothing. I deleted almost every lenovo programm except energy management and OneKey recovery and i disabled as much programs as possible on startup but there's almost no difference.
    Now, I don't really care about the high percentages but what I do care about is that it gets extremely slow when 80% of the ram is in use. Does anybody know what i can do about this? I already tried the refresh windows option but that didn't help. Or am I just stuck with a device that has very very very poor multitasking performance.

    hi spromper,
    Welcome to Lenovo Community Forums!
    Opening Task Manager will show you which application utilizes the RAM.
    Also Doing a clean boot will help on freeing up RAM
    http://support.microsoft.com/kb/929135
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • IdeaPad U310 touch: Can no longer enter bios after updating to latest version

    I flashed to the latest U310 bios (http://download.lenovo.com/consumer/mobiles/65cn99ww.exe). I switched to "legacy boot mode" (from UEFI), in an attempt to workaround a driver issue. Now, I'm no longer able to enter BIOS whatsoever. There are plenty of forum posts by many users hitting the same or similar issues on U310/U410/U330 and similar ideapad products. But the resolutions where they exists are either invalid, or involve flashing to 65cn99ww.exe, which is not possible.
    [Environment]
    Lenovo IdeaPad U310 touch, Windows 8 (also tried Windows 8.1)
    [What I did]
    Flashed BIOS using official Lenovo bits (65cn99ww.exe). No errors occured
    Enter BIOS afterwards and change to legacy boot mode (from UEFI)
    [Problem]
    Cannot enter BIOS to view or change any settings.
    [Debugging]
    Try to enter BIOS by key button sequence.
    1. Tried the following combinations during bootup: F2, Fn+Fn, F10, Fn+F10, F1, Fn+F1, 'B', 'N', Fn+'B', Fn+'N', Delete, Esc.
    ==> No change in behaviour. I tried each many times in case the timing is important.
    2. Boot by Novo button. This brings up a menu, which includes an entry to enter BIOS. However, choosing that menu entry boots to Windows
    3. Reboot to UEFI firmware settings from Windows (Settings/General/Advanced/UEFI). I can choose to boot to UEFI settings, but ultimately, just boots to Windows 8.
    4. Try to reflash BIOS. Fails with error 182: Version less than or equal. So reflash fails
    5. Try to reflash old BIOS. Flashing fails
    6. Unplug battery from motherboard for 1 minute. No difference in behavior
    7. Boot with SATA disconnected.
    8. Try various flashing options and alternate ways to flash. Not successful
    [Conclusion - BIOS is faulty] 
    I think this problem can be solved easily with a slightly newer variant of the BIOS being officially released by Lenovo. If someone from Lenovo is reading, can you please open an internal case on this.
    Otherwise, I'm open to suggestions from the community. Does anyone know how I can hex edit the bios version #.
    Thanks
    Solved!
    Go to Solution.

    All,
    When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
    It may be that we have removed it.  The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
    Is it possible that you have a touch model and applied the non-touch BIOS?
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • RE: ideapad u310 touch hinge

    so im going to have to fix my hinge myself... problem is i see multiple hinge types when i go to order. can anyone who had this problem send me a picture of the correct hinge type or even better send me a page where its on sale so i can buy it http://www.ukpcsparts.com/lenovo-ideapad-u310-touch-lcd-display-hinges-p-41349.html?zenid=0e57435dbffdf8b741deb38bd0bb7975 or http://www.ebay.com/itm/New-Lenovo-IdeaPad-U310-Touch-LCD-Display-Hinges-Left-and-Right-/181628676540?_trksid=p2054897.l4275  these are the two types .... please help 

    I'm not an owner of your model, but in looking over links you have provided, I believe the picture shown in the eBay sale is incorrect.  The hinges pictured in UK PC Parts link would be the correct ones when compared to Page #90 of the diagram shown in your model's Hardware Maintenance Manual and the pictures shown in the additional eBay search I did.  Here are the results...
    eBay search: 
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313.TR0.TRC0.H0.XIdeaPad+U310+hinge.TRS0&_nkw=IdeaPad+U310+hinge&_sacat=0
    Hardware Maintenance Manual:
    https://download.lenovo.com/consumer/mobiles_pub/ideapad_u310_u410_hmm_1st_edition_mar_2012_english.pdf
    If you are still interested in the hinges offered by that eBay seller you might want to send them a message and have them verify that the picture is correct for what they are selling.
     

  • Ideapad U310 won't boot - no onekey or bios

    Hello!
    Recently, after PXE installing a fresh copy of Windows 8.1 on my Ideapad U310, the screen turned off and the computer failed to boot. Now, when I try to turn on my laptop, the screen stays off, the fan turns on and the ethernet lights blink.
    Unfortuantely, my warranty is void from the installation of a new Wi-Fi card to fix some reception issues, so exchanging the laptop is not an option.
    Here is what I've tried:
    1)Drained the battery and held power button from 30~45 seconds (didn't work)
    2)Opened the machine and unplugged the battery  and held the power button (didn't work)
    3)Using the OneKey Recovery Button (no menu at all)
    4)Monitoring my PXE server to see if the laptop was trying to make a connection.
    5) Tried inserting a Windows PE usb to see if I could get to the command line
    The funny thing is, the uplink light on the ethernet plug stays solid green (indicating a 10 mbps transfer) and the amber light blinks, indicating that some traffic is traveling on the line. 
    Any input would be greatly appreciated.
    (I have the i7-3517U model) 

    I was worried that would be the case.
    Thus, I dropped my computer off this morning at a repair center and will await the results.
    I reinstalled my orginial wifi card before dropping the computer off again.

  • Strange wifi problem on a brand-new MacBook Pro

    Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
    So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
    Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
    One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
    So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
    I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
    Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

    Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
    mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
    Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

  • Wifi problems still exists?

    I sold my gs60 that had an 870m back in january mainly because i couldnt bare the wifi problem. I really loved the laptop and everything about it but everytime my laptop overheated the wifi would drop from 100mb to 1mb or less at times, monday im thinking of buying a new msi laptop and im wondering if these models that are currently being sold on amazon and etc still have the wifi problem or has it been fixed?
    And trust me, i read the forums, i read the guides and im pretty decent with computers/software and etc, i uninstalled, reinstalled, updated it, changes adv. settings and even though it improves certain things the problem was still there. So does it still exist?
    Or should i just buy a USB wifi?

    This problem only occurs in earlier patches of Intel WiFi card of GS60 2Px (8xx series of NVIDIA graphic cards) and not every unit was affected.
    If you don't want to take this risk, I'll suggest you buy GS60 2Qx (9xx series of NVIDIA graphic cards).
    USB WiFi is a good idea. It certainly has a better signal comparing to the WiFi embedded in the body of the laptop.

  • Macbook pro 15 inch wifi problem (late 2011)

    Hello,
    Here I write a little desperate with this problem that I have on the MacBook Pro (late 2011) with WIFI .
    For several months ago, when I power on the MBP is all apparently normal , spend a few minutes and I lose the WIFI , the icon still comes out as "connected " but no WIRELESS signal , I turned off the WIFI, but, when I try to change back to turn ON, the icon of WIFI still OFF ( the inverted triangle ) . Restarting the MBP and still the problem no signal and appears as disabled , delete PRAM several times until finally everything works again , spend some time and again the same thing sometimes is fine for several hours, go out to eat and return and again the same thing, the worst was when I saw the message "Hardware not found" and "X " where the icon goes WIFI . I rebooted several times and not managed , this was the "hardware not found" message. Some time ago I went something like , when Lion had and read that resetting the PRAM and managed , never came out , but now even that it manages , and it is becoming more common , I thought it was the OS ( MacOSX Mavericks ) so I reinstalled (I'm not used Time Machine, I install all again ), this work the lasted several days without fail, until she passed again, I'm out of WiFi, when I see no WIFI signal in the list , restart me WIFI goes off and I can not change , restart it goes back to " hardware not found" and so on.
    Now desperate for this, I opened the MBP , disconnected the cables from the Airport card and reconnected with care and making sure you are all well , turned on the MBP again and works!!, I lasted two weeks , then I thought it was that. But again the whole problem again.
    Already investigating more online and I found some details from other users
    1 / Both WIFI and Bluetooth are on the same card ( the q disconnected and reconnected )
    2 / If the card was wrong , losing the WIFI Bluetooth should lose , but I tried Bluetooth and has no problems
    3 / Reported that resetting PRAM or SMC but still, in my case, does not work.
    Now all I have left to rule is the WIFI antenna that is located ( if I remember correctly ) for the bottom of the screen, and according to several users this tends to fail from constant use to close or open the MBP (or either to cover or uncover ) , and sometimes it just heats and heats close to this area .
    Has anyone had a similar problem? My MBP turns 2 only on March 7, 2014 , I can not believe all that cost me and now is about to fail , I have a Sony VAIO Core 2 Duo for about 5 years (or more) ago and is still running and has been dropped many times and nothing has ever happened : (
    Additional data on my MBP ,
    Several months ago ( long before the problem with the WIFI) I changed the hard drive for an SSD ( 250GB Corsair Neutron X ) .
    There is a problem that often makes me too, is that when you close the MBP ( to open ) , and open it back again ( out of sleep) the following happens :
    1 / It instantly freezes when waking from sleep and I have a long wait to enter the password.
    2 / When you leave idle normal let me put the password, but just when giving ENTER freezes
    3 / Out of sleep, let me put the key, ENTER and when I load the desktop freezes
    Another problem :
    This only happened to me a few times , as I mentioned , my MBP is formatted ( have Mavericks ) before formatted (clean install without time machine) , I closed the MBP ( I sent to sleep) and the open the screen was black , but as with bright, and not leave the state, turned off force ( pressing the button) , start the MBP again (power on) charged normal gray screen with apple but with a fairly low brightness, spent a few seconds and turned the brightness to normal and started normally .
    I hope some can help me with these problems.
    PD : I'm from Peru , if anyone knows a trusted service that please let me know .
    Thank you very much .

    Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
    http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

  • How come they still haven't fixed the ios 6 wifi problem on ios 6.0.1 making me mad -.-

    I know apple or the tech support doesn't read this but come on tell them to fix the wifi problem that started from ios 6 and still continuing to ios 6.0.1. I already gave them another feedback like 5 days ago. I really don't want to reconnect to my wifi everytime. I already did everything possibly to fix my wifi problem. I know its IOS 6.0.1 because it started with ios 6 and still not fixed by apple update to 6.0.1.
    I have a very limit data plan of 300 MB on at&t and I don't want to go over so I rely on my wifi most of the time.

    GTR_Lover wrote:
    Maybe you just lucked out but both my devices running ios 6.0.1 have wifi problems shutting of at random times during sleep. I know you guys will say when its plugged in it doesn't lose wifi true but I never remember having this problem in the previous ios verison from ios 4 to 5(On my Iphone 4, and from my Iphone 4s from IOS 5) until I updated both devices to ios 6  or even when I had a iTouch 3rd gen long time ago I never remember it shutting of my wifi. I am telling you this never happened before IOS 6 where I need to leave it plugged in just to have my wifi during wake up.
    GTR
    I thought I believed my iPhone 4 with iOS5.0 would not disconnect during sleep mode. However, I was wrong. What I did was to ping the IP addresses on my iPhone 4 (iOS5) and iPhone 5 (iOS 6 then, and iOS6.0.1 now) when they were in sleep mode. Very true that there were timed-out on both devices. Once I woke them up, ping went thru. I did a scan on my home network using my iPad while the other 2 phones were in sleep mode, I was not able to see them.
    I thought my iPhone4 did not disconnect too. But again, I think the reconnecting to wifi on iOS 5 is SO MUCH quicker than on iOS6 so user would think there was never a disconnect.

  • Wifi problem after.4.3 update on xperia z

    Hi all,
    After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
    I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
    Here's the problem in detail:
    When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
    Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
    I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
    I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
    As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
    Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
    If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
    Regards,
    Danny
    Sony Xperia Z
    Modelnumber: C6603
    Android version: 4.3
    Kernal version: 3.4.0-ge09aff8
    Build number: 10.4.1.B.0.101

    I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

  • Wifi problems ipad 3rd and Time capsule 4th generation since iOS 8 upgrade

    Does anyone have the same issue?... I have wifi problems betwen ipad 3rd generation and Time capsule 4th generation since iOS 8 upgrade. Solution: I must switch on/off airplane mode in order to start using Wifi...
    I have the latest updates for all equipment and I don't have similar problems with my iphone, macbook or mini-ipad.

    It works ... removing and reestablish the wifi connection works. Thanks ...

  • Email and big wifi problems.

    Email and big wifi problems.
    Why does it take 6 minutes to send a photo attachment when my iphone 4 will do it in 30 to 40 seconds ?
    Why will my email account be recognised and log on only half the time?
    Why does the wifi keep dropping out?
    Why does the speed and signal vary when I'm sitting two feet away from by wifi router?
    All settings in my phone have been reset twice as per advice from vodapone

    Thanks very much, jjgraphics. I will grit my teeth and try India once more, as you suggest, and then get in touch with the moderators.
    Karen.

  • If I install Yosemite and find that the wifi problems are too bad, can I go back to Mountain Lion?

    Almost everything I do on my MacBookPro requires a steady wifi connection. I have been reading all the horror stories about the wifi problems with Yosemite. I would like to install Yosemite, but would like to be able to go back to Mountain Lion if the problems are as extreme as I have been hearing.
    Details: My Mac is 3 years old (Apple Care ran out 2 days ago!). I recently upgraded from 4GB of ram to 16GB.
    Router is a Linksys E4200.
    I have an Iphone-4s
    My husband has an older MacBook running Lion.
    I connect to an Epson Artisan 835 with wifi via my router
    We have no need to have the Apple devices communicate with each other.
    I am currently running an appliance in Virtual Box. One reason I want to move to Yosemite is to be able to run it in VMware Fusion instead.
    Thanks.

    Hi there CarylLynne,
    If you upgrade to Yosemite, you should be able to use the following article to revert to the previously installed OS using Time Machine, named:
    OS X Yosemite: Revert to a previous OS X version
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

Maybe you are looking for