Ideapad U330p problems on win7 64bit

Hello everybody!
After downgrading my U330p (i5, 4gb ram, 508gb hybrid, SKU 59372398) to win7 prof. 64bit I have several problems:
I installed all drivers available at the lenovo-support site, but I still have an unknown device in the devicemanager.
The hardware-id is "root\lenovo\/hid". So it seems to be a HID-device, but I don't find anything missing.
The second problem are the hotkeys: they work except for the airplane-mode-button, but I don't have any OSD-symbols.
The airplane-button doesnt do anything at all. So I also have no possibility of turning wifi and bluetooth on and off, which is rather annoying.
Looks like I'm missing some hotkey-drivers, but I double checked, I have everything installed from the lenovo-homepage, and for every win8/8.1 driver there is also a win7 driver available.
Any advice?
Greetings from Austria,
trashmaster.

Hi Trashmaster,
have you solved the problem with the Airplane-Hotkey yet?
As I posted in the German communitiy, I have the same issue, except for having bought a free DOS version of the u330p.
In addition, I have a problem with the Bluetooth driver.
Does that one work for your Laptop?
Greetings,
Chrayschn

Similar Messages

Re: Qosmio F50 - CPU problems with Win7 64bit

Hello,
The CPU is working at a very high %age of the maximum capacity, much more than compared to Windows 7 32bit. Anyone facing any similar problems ?
Thanks

> Sorry I failed to mention this but when I meant "high percentage" I was talking about working with FL Studio 9, a music editing/creation software. It does require some resources to run, but on my Win 32bit it the CPU would be around 20% for the most complex compositions. Now, it's at 40-50% for less complex projects
I think in such case you should ask the developer of the FL Studio 9 why the software stresses the CPU using the Win 64bit system
From my knowledge every software has to be optimized for single systems and possibly this software would run smoothly in connection with an 32bit system.

Flash install problems on Win7 64bit install_flashplayer10_chrd_aih_1_1_1_1_1_1_1_1_1_1.exe

Flash Version: Adobe Flash Player 10.3.183.7 (2,94 MB)
Windows: Win 7 - 64 Bit SP1, German
Hi,
My system hdd crashed last week (yes, I have a data backup) and last weekend I'm started to reinstall everything.
At the point, I started to install flash player or acrobat reader, I came to an problem.
I download the installer "install_flashplayer10_chrd_aih.exe" and put it on the desktop. Right click, start as admin and the exe disappeares. (I'm member of the admin group, system is not member of an Active Directory)
I checked process list an I found the process which flips:
started with: install_flashplayer10_chrd_aih.exe
this started install_flashplayer10_chrd_aih_1.exe which started
install_flashplayer10_chrd_aih_1_1.exe and this started
install_flashplayer10_chrd_aih_1_1_1.exe
After the new process started, the older process kills automatically. Only two adobe jobs are in the process list all the time.
In the temp folder, I found
install_flashplayer10_chrd_aih.exe
install_flashplayer10_chrd_aih_1.exe
install_flashplayer10_chrd_aih_1_1.exe
install_flashplayer10_chrd_aih_1_1_1.exe
install_flashplayer10_chrd_aih_1_1_1_1.exe
install_flashplayer10_chrd_aih_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1_1 _1_1_1_1_1_1_1_1_1_1.exe
and lot of more.....
I restarted my system several time, disabled AVG antivirus, installed lates Microsoft patches and I tried to unpack the Adobe executable but stops with a password request. Looks like the exe is password protected.
The funny thing is, that I have the same problem with the acrobat reader X.
I never saw this problem before, all other installer (Office, Firefox, Irfanview, Itunes, ....) works well, only the Adobe installer are all broken.
How I can fix that whithout reinstalling everything. Please help.
Thanks a lot
Erik

Download the Flash Player installer from the link in http://forums.adobe.com/thread/889580
Download the Adobe Reader installer from http://get.adobe.com/reader/enterprise/

T400: Serious problem with Win7 64bits (mmc.exe)

Hi, I have a T400 with Windows 7 Ultimate 64 bits.
I have updated ths OS with Micorsoft and Lenovo updates.
Problem is when I try to access Windows Services:
- From command line executing services.msc
- From Computer Management -> Services and Applications -> Services
I got an error of Microsoft Management Console (Microsoft Management Console has stopped working) and this are the problem details:
Description:
Stopped working
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   mmc.exe
Application Version:   6.1.7600.16385
Application Timestamp:   4a5bc808
Fault Module Name:   iertutil.dll
Fault Module Version:   8.0.7600.16385
Fault Module Timestamp:   4a5bdf43
Exception Code:   c0000005
Exception Offset:   0000000000001d1d
OS Version:   6.1.7600.2.0.0.256.1
Locale ID:   1033
I also have some dump info that can help but I don't understand at:
C:\Users\Chemi\AppData\Local\Temp\WER9E69.tmp.WERInternalMetadata.xml
C:\Users\Chemi\AppData\Local\Temp\WERDE37.tmp.mdmp
I can send the info anywhere if you want it.
Do you have any tip about which could be the problem? Any other tests I can do?
BTW, I tried the same process in Safe Mode, and the same problem exists so I understand it is not related with anything I could install.
Thanks in advance,
     Chemi.

- start > run > type msconfig and press enter
- click services tab and select hide all microsoft services and disable all third party services.
- click startup tab and disable all startup items
- click ok and choose restart
does this work?

Suche einen AKKU für Lenovo IdeaPad N581 (i3 Prozessor, Win7 (64bit))

Liebes Forum,
habe mich hier angemeldet, weil ich im Netz und auf der Lenovo-Herstellerseite nix finden kann.
Hoffe um Abhilfe von kompetenten Mitnutzern..
Besitze einen Lenovo N581, mit einem i3-Prozessor, Win7, 8GB RAM und SSD-Festplatte.
Bin hochzufrieden mit dem Produkt...NUR: finde keinen Akku!!
Wo finde ich im Netz einen passenden (wenn möglich eine ORIGINALE HERSTELLER-BATTERIE) Akku?
Amazon spuckt nur einen einzigen Treffer aus (ohne Bewertungen) und hier bei Lenovo kann ich nicht mal mein Modell finden (**bleep**?!).
Wäre für Hilfe dankbar.
Beste Grüße!
Gelöst!
Gehe zu Lösung.

Hallo vaughanwilliams,
danke für die Nachricht.
Alle verfügbaren Akkus findest du unter dem folgenden Link:
http://shop.lenovo.com/de/de/accessories/batteries-power-adapters/
Sollte der Akku für dein Gerät nicht aufgeführt sein, wende dich bitte an unsere Kollegen vom Technischen-Support.
Die Kollegen können dir auf jeden Fall weiterhelfen.
http://support.lenovo.com/de/de/supportphonelist_alt1
Danke und schönen Gruß, Marcel
→ Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

ESATA over Expresscard W500/Win7 64Bit problem

I am using a W500-4061AK3 with Windows 7 (64bit) and am not able to get my external harddisk running over an eSATA expansioncard (Trust IF-3800p) in the Expresscard slot, although the whole is perfectly working under Ubuntu 9.1. This is already the second card I try, same issue with the DeLock 61748 (Silicon Image 3531 Chipset) ... I have installed all updates via ThinVantage System-Update and all Win7 Updates from Microsoft. I don't know whether there is maybe a driver missing for the W500 Expresscard-slot for Win7 64bit? The eSATA expansion cards are both listed as Win7 compatible. Has anybody successfully used the W500 with an eSATA Expresscard under Win7 64bit? Thanks for your help.

I am currently using this eSATA ExpressCard: http://intrl.startech.com/product/ECESAT32-2-Port-SATA-6-Gbps-ExpressCard-eSATA-Controller-CardCopy speed for 462 File(s) or 7'672'800'154 bytes is 127 seconds on SATA2 Disks, good enough for me.Win7-64 running on Thinkpad W701 model 4323CTO. Got some issues with Western Digital SATA3 (6GB) disks to be resolved yet. For my external USB3 SuperSpeed enclosures I am using:http://intrl.startech.com/product/ECUSB3S2-2-Port-ExpressCard-SuperSpeed-USB-3-Card-Adapter...and this single drive enclosure (so far the best I have found and seen).http://intrl.startech.com/product/SAT3510BU3-35in-SuperSpeed-USB-3-SATA-External-Hard-Drive-Enclosure-with-Fan You can shop all that at www.compatible.eu. Critical is the ExpressCard interface, Gen1 or Gen2.Trying to find out what ExpressCard Interface is used in a Thinkpad W701 model 4323.Anyone knows more?

Since automatic update to safari 5.1 it doesnt open any websites anymore. i'm using win7 64bit as operating system. how could i get safari 5.1 to work correctly or downgrade it to earlier version?

i guess i said all in the topic:
had an automatic update to safari 5.1, since than it doesn't work anymore, can't open any website.
i'm using win7 64bit as OS.
does someone know how to get safari 5.1 to work at win7/64bit
or how can i downgrade to safari 5.0 again (if i try to download it somewhere, it always switches automatically to safari 5.1)
many thanks for ur help,
rainer neumüller

isn't there any apple admin who knows about this problem and knows how to solve it? i found several post in other fori who had the same problem, none was answered sufficiantly.
plz give me a chance to use safari again!

Itunes 10.5.1 Completly not working in Win7 (64bit)

This has been a total disaster update for me. I am running Win7 (64bit) with all my windows updates current. I went ahead and updated Itunes to 10.5.1.
That was a severe mistake. Itunes crashes every time I start the program. I notice that genius is running right at the start up and I manage to shut it off but it still crashes.
So far I have done the following:
Started Itunes in safe mode----Crashes
Done a complete clean install and reinstall---Crashes
Downgraded to 10.5 clean install---Crashes
Upgraded back up to 10.5.1 started back in safe mode--Crashes.
I have stopped my anti-virus during all installs and starts and it still crashes.
My system is clean of viruses.
No error messages are provided for all the crashes other than "This program has stopped working"
My frustration is awful. I really hope they get this fixed or someone can offer a solution. I am so sorry I ran that upgrade.

After a day 1/2 of frustration and tears I got Itunes 10.5.1 working properly on my Win 7 64bit Home Edition.
I concluded that the profile, lets call it blue99 was in some way corrupted. The reason is that I followed the troubleshooting steps outlined here:
http://support.apple.com/kb/ts1717
Under the heading of Create a New User Account
I went ahead and created a new profile, lets call it B99. Under this new profile, I started up Itunes and sure enough it fired right up, Itunes store came up etc with no crashes. The strange part is that when it started up, the Itunes user agreement came up. In the other profile where Itunes would crash, after I would re-install, I NEVER GOT THE USER AGREEMENT. It would just go through an install, and when it would restart, it would immediately start to crash.
So now I concluded in agreement with the suport article that it was a "user-specific problem"
With this info, I took a gamble. I did not follow the "User specific Troubleshooting" offered in the article.
Instead I followed the directions found here:
http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile
I followed these very carefully. I copied all of my files found under C:\users\Old_Username folder, in this case that would have been the profile blue99. From there I copied the folders in there to the C:\users\New_Username folder in this case B99. The most important rule of thumb is MAKE SURE YOU HAVE FULL ADMINSTRATIVE PERMISSIONS BEFORE YOU START.
I then right clicked on the B99 folder and went to Properties and under the Security tab I gave the profile B99 full permissions. After this I went back to Control Panel and under User accounts I went and turned the B99 profile into full administrator and took the corrupted profile blue99 and switched it too Standard adminstration.
I restarted my computer and logged in under B99, started up Itunes and Yay!! Itunes is up and running. No crashes so far!! When I was running Itunes on the old profile I went ahead and turned off Genius and Home sharing. In this new profile I turned on Genius and it worked with no crashes. But I don't want to push my luck so I turned it off. Itunes has been running with no crashes. This is what worked for me, yeah its convuluted but I was desperate!! I don't even consider this a patch, so much as I cheated to get Itunes running.
If someone has a simpler way to get Itunes 10.5.01 to run, please let me know!!
Please note when I started this I had already reinstalled Itunes on the corrupted profile. I did not install Itunes again on the new profile. I just started it up.

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

Guys I have the same problem.
Since I installed iTunes 10.5 I can't play any of my music videos downloaded from the iTunes store.
I can play music ok but no videos. I just click on the videos and nothing happens!!
Help..... is there a remedy???

HP COLOR LASERJET CM2320 MFP DO NOT SETUP IT ON THE WIN7 64BIT USİNG IT ON THE NETWORK

my hp color laserjet 2320 mfp is not possible to setup it on the my win7 64bits when ı want use it like network printer.But since 2 weeks ago ı can see it on the network when ı want to install it using orginal hp product sotware.When installing the software is not found by software on the network.Why ı am not able reinstall it again.But so intresting it is possible install it using win7 64bits drivers.İf ı install it by these drivers ı can not use all funtions of the printer.I want use orginal software for installing it on my computer and to use all faciliies.I tried all possibilities for windows part .Delete all drivers from pc,registry part but no solution. ı would like find a solution.ıs it possible any problem windows part if it is. what kind of problem and solution.Please give me a help...

HI DeePure,
Print out the supplies status page, and let me know if all the colors print correctly?
Do you have an extra set of cartridges we can use to troubleshoot with?
Print the supplies status page
Follow these steps to print out the supplies status page from your printer.
On the Printer’s control panel, press the Setup button.
Press the down arrow to highlight Reports , and then press OK .
Press the down arrow to highlight Supplies Status Page , and then press OK .
Figure 1: Supplies Status Page
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Application on Win7 64bit throws error -50103, but not on Win XP 32bit host

LabVIEW application newly installed on Win7 64bit host throws error -50103.
Same aplication deployed from same installation disk on Win XP 32bit host have been working for 2 years withourt problem.
I did have a problem with importing the MAX configuration from the Win XP 32bit machine to the Win 7 64bit machine.
My solution was to install all the drivers from my most recent Devaloper Suite 2012 DVD.
After that the executable did run fine, except when the variuos DAq tasks are executed for the second time in a loop it thows error -50103.
If i click ok on the erro popup, everything else works fine until in the next pass of the loop I get the same error.
Why would I get error on one host but not on the other one?
How do I fix this?
Scientia est potentia!

A common error that you can find numerous posts about with a search
http://forums.ni.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3A170&q=5...

CHM does not display under Win7 64bit

Hi all,
the CHMs generated unter Win 7 32bit do not open correctly under Windows 7 Enterprise SP1 64bit. The CHM viewer opens and the TOC is visible, but all pages are empty (white, no error message). The CHM is stored locally. The same CHM can be viewed without problems under Win7 32bit.
Any ideas about this?
Robert

Wrong information - sorry! The CHMs were generated under Windows 7 Enterprise 64bit as well. That means they do not display on the same computer they were gnerated on, but under other systems that have 32bit OS (Win7 or XP).

.xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

Work Environment: Excel 2013 64bit/Win7 64bit
Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
[4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
phillfri

I think I solved the issue.
Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
does not apply because the computer does not have the expected software (Excel.exe)."
Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
Environments:
[1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
[2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
phillfri

Ideapad U330p problems on win7 64bit

Similar Messages

Maybe you are looking for