Ideas for using One to One Open Training Appointment?

I have an appointment for the Open Training Appointment, but I don't have any projects that I am working on. Have some suggestions for something I can use it for?
Thanks,
Annie

Hi- so what did you end up using it for? I have an Imac and am wondering if I had a project would I have to bring it in to work on it? that'd be a pain...

Similar Messages

What's the idea from using one of the Tasks a common cost "Capitalization"?

Hi,
I want to know What is the idea behind using on of the costs included in the work breakdown structure as a common cost as a group level?!!
and Shouldn't i include it in any transaction?!!!(i.e. don't use it in the PO, AP invoices....etc?).
Please i need clarification,
Thanks in advance.

Hi
In any project there could be some type of shared cost, that may be associated with a project as a whole, but it would not be practical to allocate such common cost to each one of the individual tasks.
For example, a construction project will have a task for foundation, plumbing, electric wiring, etc. The project manager, and construction inspector are resources common to all those tasks, and it may be costly to try and allocate directly the hours of those resources to each one of the tasks.
Dina

Drive not ready for use, door may be open

iTunes transfers about 800mb of content before error message appears:
The drive is not ready for use; its door may be open. Please check drive\...
I have restored, formatted, tried different PC's always get same result. Visited genius bar and they declared that my iPod was healthy but refused to move enough content to the iPod to reproduce the problem. iPod is a little under 2 yrs old.
My confidence and respect regarding Apple and it's products is now greatly in question. I spent $400 duchats on this thing and I am starting to feel like an unappreciated client.
Thanks for any help...

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

1000s of photos randomly sorted into 1000s of folders. Any ideas for getting them out without opening each one??

Somehow, very much unintentionally (it might have something to do with a 2 yr old "typing" on the keyboard while I wasn't looking), 1000s of my photos have been placed into separate folders, 2 or 3 random photos or videos in each folder. I have started opening each folder and moving the photos out, but with almost 1600 folders to go, I need to know if some else has ever encountered this issue, and if so, did you find a quicker way to get the photos out of the folders without having to manually open each one?
For the record, I now have my computer set to lock my screen when I leave my desk, lesson learned.

I am using an iMac with iOS 7.0.4. All of the photos were on iPhoto '11 after I updated to 9.4.3, and Aperture 3.4.5, but a few months ago they all disappeared from the iPhoto and Aperture libraries, Events, Photos and Faces sections. A few weeks later, I noticed a bunch of new folders on my external hard drive with the same title in a serial list of numbers, had somehow been created. Since I still had the pictures backed up on an external hard drive, I didn't worry about it too much at the time, but today I needed to find a picture from years ago and that brought up the need to fix the mess. In opening the 200 or so files that I have already opened, I noticed that they all listed in their details that they had been modified on 7/27/2013, from 12:07 am to 12:33 am (I guess it wasn't the 2 yr old's fault after all, because she would have been sleeping, sorry kiddo). The peculiar thing is that there is no rhyme or reason to the way the photos and videos were put in the folders. Some folders have only photos from a broad range of time, some have photos and videos, but none of them are sequential in time within the folder. When I transfer the photos and videos out of the folders, into the main overall picture folder, some of them are already in the main folder and some of them are not, meaning that I can't just take for granted that they are all copies, and delete all of the folders with that certain name.
Since I have now cleared my child of being the culprit for all of this mess, I'm thinking it must have been caused by a computer glitch or an update, as Terence suggested, especially considering the time of night when the changes took place. All that is listed in the software update section of my System Preferences area is an update to the AirPort Utility to version 6.3 on 7/26/23 at 12:23 pm. iPhoto had updadated to 9.4.3 on 4/27/13, but none of the files showed modifications on any date other than 7/27/13. Aperture had also updated to version 3.4.5, but it had updated days earlier on 7/11/13. Nothing had updated since 7/11/13 until AirPort Utility updated on 7/26/23, and nothing updated after that until 9/12/13.

Switch for Using One Monitor w/2 CPUs?

In passing, I heard someone refer to some sort of switch that can be used to share 1 monitor w/two CPUs. I already have a setup w/2 monitors on my G5, but I need to get a cheap-o PC tower to run a couple of programs. REALLY don't want to use Virtual PC and I don't want to buy a new Intel Mac quite yet. So regardless, this switch is supposed to be able to help you go back and forth between the Mac and the PC on one monitor.
Any leads on who might manufactor something like this? And any experiences, good, bad, etc?
Thanks!

Hello! You are referring to a kvm (keyboard, video, mouse) switch. They're a couple of types (usb and ps2). You'll have better luck trying to use a usb type but be sure the pc has usb ports. I have 3 pc's and 1 mac connected using a kvm and like it fine. There are several companies that make them. One is Monoprice.com which is where I got mine but the model I have is discontinued. Here's some links. Tom
MONOPRICE.com
OWC KVM's

Off Topic: DAQ 5102 PCMCIA version no longer available / searching for used ones

Since some time, the DAQ 5102 oscilloscope PCMCIA card version is no
longer available from NI.
Does anybody know where to buy one. (I already searched ebay for
weeks)
Or does anybody want to sell ? via ebay ?
Please let me know.
Thanks.
Sorry for this off topic, but i found no better group.

Maybe it is this bug: http://bugs.kde.org/show_bug.cgi?id=154969
The decisive effect is 'Improved window management' - if this effect is enabled kwin works normally.
Last edited by May-C (2008-02-13 01:16:48)

Ideas for using Aperture 3 Organizing Tools

Hello ... I have Aperture 3 and would like some insight on how others use the organizing features. I know that, in Aperture 3, there are Ratings, Flagged, Color, Text, Keywords. I realize that everyone has a different system, but would like some input from others on how they use them.
1. What would be the differentiation for Ratings 1,2,3,4,5?
2. What would be an appropriate use of the Flagged feature?
3. How would one use the color to set apart pictures?
Just looking for ideas before I set "my" organizing system up
Thanks

Some ideas:
1. What would be the differentiation for Ratings 1,2,3,4,5?
5. I'd show that to anyone anyday... that's my Ansel Adams moment
4. That's very good.
3. That's worth keeping my find a use for it
2. That's out of focus but it's the only pic I have of my dog
1. That's embarrassing but my wife won't let me trash it. It's the only pic of her dog
2. What would be an appropriate use of the Flagged feature?
Flags are great for temporary collections. Say you need to decide a number of pics for a particular project. As you go through the library you can flag candidates then pick when you view the Flagged SMart Album.
3. How would one use the color to set apart pictures?
Simple ideas: Label for "Not Yet on Offsite Back up" "Have uploadd to Online Sharing SIte" etc
Regards
TD

Ideas for using intel graphics

I've got two laptops, one with i830 the other with i852/855GM. Neither works with KMS(kernel modesetting). The i830 just has a black screen with KMS. The i855 works for a little while until it completely freezes.
The i830 laptop works well with the nomodeset grub kernel option and the 2.9.1 driver. Fails completely with KMS enabled and doesn't work at all with 2.10 as that has no UMS(user modesetting). Suspend/resume doesn't work well. The vesa driver doesn't work well with the i830, not sure why.
The i855 freezes with KMS , the 2.10 driver doesn't support UMS and the 2.9 driver doesn't work at all. I've removed the xf86-video-intel driver and set xorg to use the vesa driver. I've had no issues using the vesa driver with suspend/resume actually working.
I would like comments on issues with older graphics cards and newer versions of xorg. There seems to be a trend where support for older graphics cards is being dropped by the manufacturers and the older drivers are also being dropped by xorg.

I don't have a notebook, but my IBM Netvista works only w/ intel-legacy:
[karol@black arch]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
I have KMS enabled and get no lock-ups, but once I get into X, I can't go back to the console (the screen is garbled, but otherwise works fine).
This is my downgrade script:
#!/bin/bash
pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-video-intel-legacy-2.3.2-3-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz \
/var/cache/pacman/pkg/intel-dri-7.5.1-2-i686.pkg.tar.gz \
/var/cache/pacman/pkg/libgl-7.5.1-2-i686.pkg.tar.gz \
/var/cache/pacman/pkg/libdrm-2.4.19-1-i686.pkg.tar.gz
in my pacman.conf I have
IgnorePkg = xorg-server xorg-server-utils xf86-video-intel-legacy xf86-video-vesa xf86-input-evdev xf86-input-keyboard xf86-input-mouse intel-dri libgl libdrm
I tried many different drivers, libdrm etc. - nothing worked. W/ the above setup I have no complaints.

How to use one module pool program in another module pool programming?

Hi
I have one moodule pool program.
In one of my screen i want to use some code which already developed in another module pool program.
Is there any direct way for using one module pool programcode in another module pool program.
If there any approaches for this plz help me in this issue.

Dear,
If you want to use the code.
first you can write your code in a subroutine in module pool program 1
and then you can use it from module pool program 2 by
perform subroutine_name(program_name)
using P_1
changing C_1
if you wan to use one module pool data into other module pool.
so that is another requirement.

RV320 - using one WAN port

What is the correct configuration for using one WAN port so that the router doesn't crash several times a day?
Should WAN2 be left as address from IP ?
Shoudl WAN2 be configured as static IP ?
Should WAN2 interface be disabled?
Should WAN2 be configured as DMZ and left as default 192.168.1.0?
Should WAN2 be configured as DMZ and then disabled?
It's definitely the router which is at fault, power cycling the fibre to copper converter dosen't fix the issue.
Nor does swapping the FTC for a brand new one.
Only a power cycle on the RV320, or a remote web interface reset if I'm unside the LAN, makes it work.
Temporarily, then it crashes next day.

I have the same settings, and the same up-to-date firmware.
I see in the logs that the router incorrectly reports WAN2 as Up, then can't sync rate with it.
Most of the time that failure is around the same time as the users report failure.
But nothing is logged for WAN1 so it doesn't seem to be a physical failure in cabling, or the FTC converter feeding the router.
2015-04-27, 10:33:35
Kernel
kernel: WAN [2] UP
2015-04-27, 10:33:35
Kernel
kernel: [eth0] lanip=192.168.1.1, mask=255.255.255.0
2015-04-27, 10:33:35
Kernel
kernel: ip[xxx.xxx.xx.xxx] mask[0.0.0.0]
2015-04-27, 10:33:35
Kernel
kernel: ip[0.0.0.0] mask[0.0.0.0]
2015-04-27, 10:33:36
Kernel
kernel: WAN [2] DOWN
2015-04-27, 10:42:10
Kernel
kernel: WARNING: cant get external phy status
2015-04-27, 10:42:11
Kernel
kernel: WARNING: no highest common denominator or auto-negotiation not complete
2015-04-27, 10:42:11
Kernel
kernel: WARNING: no highest common denominator or auto-negotiation not complete
2015-04-27, 10:58:01
Kernel
kernel: WARNING: no highest common denominator or auto-negotiation not complete
2015-04-27, 10:58:02
Kernel
last message repeated 2 times
2015-04-27, 10:58:02
Kernel
kernel: nk_bcm53115_sync_speeds_phy_to_mac(): sport[5], speed[0], duplex[0]
2015-04-27, 10:58:03
Kernel
kernel: nk_bcm53115_sync_speeds_phy_to_mac(): sport[5], speed[1], duplex[2]

I did a trial using one email, then purchased a subscription using a different email. Every time I try to open a downloaded app it tells me that my trial has expired and only offers me the option to purchase it. Any ideas how I can access the subscription

I did a trial using one email, then purchased a subscription using a different email. Every time I try to open a downloaded app it tells me that my trial has expired and only offers me the option to purchase it. Any ideas how I can access the subscription I just paid for?

Sign out from Creative Cloud desktop application and Sign in with email ID using which you had purchased subscription .
https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Then launch CC apps and try to activate.
Still face issue , let me know

I bought a 1:1 training package for one year. I'm trying to sign up for multiple training at multiple stores. Is one limitation the fact that you can't book a second group or open training until you have finished the first one? Even if it's different stor

Hi Everyone:
My name is Mark. I'm new to the Mac World. I purchased a MacBook Pro with Retina Scan, as I'm going to make multi media self help books (I'm an author and psychotherapist). I have been getting a number of inconsistencies in answers to the same questions.
1 - Can I do a 1:1 by phone? When I bought my 1:1 the salesperson told me yes.
Now I find out the answer is no.
2 - I've started signing up for group, individual, and open training.
It seems that I cannot sign up for a second one until I have taken the first of any of these trainings.
So if I want to sign up for 3, 1:1's in 3 different stores, on 3 different days I can't (if I read the terms and conditions properly.) until I have my first 1:1, open, or group training.
I was told when I purchased my 1:1 that I could have as many trainings as I wanted to, and as much as I wanted. I could even spend a whole day going to different training at the same store on thew same day.
Have others found inconsistencies in what you are told by sales people and what the rules are?
Thank you for any help you can give me.
Mark Dworkin LCSW P.C.

1) The One-to-One program is in person in an Apple Store. I've never heard of any phone-based training. Perhaps the salesperson was confusing that with AppleCare which extends the phone support on your product.
2) Here is the relevant part from the official terms:
Members may have no more than one (1) Personal Training, one (1) Group Training and one (1) Open Training session reserved at any given time. After the completion of your session, you may schedule your next.
http://www.apple.com/retail/learn/one-to-one/terms.html
If the saleperson gave you incorrect information that makes the One-to-One service unusable, talk to the store manager and tell him or her what information you were given incorrectly, and ask about a refund of the cost of the program.
Regards.

For last one month I am facing problem in watching online videos on my iPod touch. It is opening or can say loading the online videos. Earlier it used to be work absolutely fine. Any solution for my problem.

For last one month I am facing problem in watching online videos on my iPod touch. It is opening or can say loading the online videos. Earlier it used to be work absolutely fine. Any solution for my problem.

For last one month I am facing problem in watching online videos on my iPod touch. It is not opening or can say loading the online videos. Earlier it used to be work absolutely fine. Any solution for my problem.

The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.

Just re-set the App -
Open the App
Hold down the power button until the slider appears
Hold down the home button (Don't use the slider) Until the App Closes
You might lose your place, but shouldnt be too hard to find it again...

When I set up my iMac I used one of two iTunes accounts I have, I now need to change it to the other one......any ideas?! Thanks in advance

When I set up my iMac I used one of two iTunes accounts I have, I now need to change it to the other one......any ideas?! Thanks in advance

Hi Pompey Woody,
Thanks for visiting Apple Support Communities.
If you need to use a different Apple ID (iTunes Store account) with iTunes on your Mac, you can sign out and then back in with the other account:
Open iTunes. ...select Store > Sign Out, then select Store > Sign In and enter your current Apple ID.
These steps are found in this article:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
You may also find the information in this article helpful:
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Best,
Jeremy

Ideas for using One to One Open Training Appointment?

Similar Messages

Maybe you are looking for