Ideas to display which component drives the other components in the canvas
I have 4 components in my canvas and I would like to learn some ideas from gurus on what are the best ways to display which component drives (drills down) the other components in the dashboard. Any info would be appreciated.
Hi,
There is no such rule on which component should drive other in Xcelsius. It all depends upon the data that you are using. Always a component with summarized data should drive a component with granular data. For eg: If you are showing Total sales in a country using Column chart and want to drilldown to the percentage of sales in each region of a particular country , you can use pie chart to show it. Here Column chart drives Pie chart and u can show this in other way also.
Hope it helps!
Thanks,
Arun US
Similar Messages
-
I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?
On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young -
I am running PageMaker 6.5 on a Windows 7 OS. I can print to all my printers except one. It is a Platesetter or sometimes called an imageseter. When I send a file to it, it gives me the message "No Process On The Other End Of The Pipe". I have installed and downloaded all PPD's and such and installed them the same as they were previously installed on a Windows XP PC when it worked great. Any ideas?
Go back to XP. PM has been for more than 10 years and is unsupported under XP. In fact, 6.5 has support only for Windows 2000 and earlier.
-
on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?
No. You have no alternative but to plug it into a computer running iTunes and restore it.
-
Revision: 12878
Revision: 12878
Author: [email protected]
Date: 2009-12-11 19:07:40 -0800 (Fri, 11 Dec 2009)
Log Message:
When sub-components don't have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage.
QE notes: none
Doc notes: none
Bugs: n/a
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/VideoPlayerAccImpl.asMichael,
"Michael Caughey" <[email protected]> wrote in message news:413f0af6$1@mail...
If I'm doing something wrong what is it? Obviously there is something
different about how I configured my environment a year ago.What happens if you bring down ms02?
Regards,
Slava Imeshev -
I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!
If someone really wants to do something, it won't take them long to find out how to do it.
http://pondini.org/TM/17.html
Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others. -
I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now
Hi there slogrown,
You may need to download these purchases directly to the device. Take a looke at article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Storehttp://support.apple.com/kb/HT2519
-Griff W. -
I have an iMac 27" and am trying to import some videos of a friends wedding into iMovie however one of the movies won't import. It doesn't say why or give any error message or codes.
All of the other movies on the card download with out a problem. The movie in question is not 'corrupt' as you can watch it in iMovie direct from the SD card but as soon as you try to import it, it just says 'error'. iIve tried moving the file to an external drive ( and other variations on this theme) then importing but have had no luck.
Can anyone please help me.The mystery remains....
Thanks for the pointers. The file type is .mts (a proprietry sony one).
I have now found some video converter software (Wondershare and iSkysoft) at a cost. Either will convert this file for me into .mp4. This I can then import into iMovie without any problems. I've checked this on the trial versions and it worked well but without paying am left with a giant watermark in the video
The mystery (which I still havent solved) is why did 20 other .mts files import fine and then this one not?
If you could point me in the direction of some free .mts converter software that would be the cherry on the cake.
Thanks -
I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
My Computer is an HP p6653w and my default browser is Firefox 3.6
My operating system is windows 7.Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
I am trying to add a wireless printer to my MacBook Pro. It was working properly until we had to get a new modem. I have gone through the steps with the printer customer service rep, and it was working properly for one day. When I booted up the next morning, the printer was no longer "connected". It will work if I have the printer and computer connected, but I much prefer the wireless capability. Suggestions? The printer is a Brother MFC7860DW. The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.
Hello,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
1. To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
2. Choose System Preferences from the Apple menu.
3. Choose Print & Fax from the View menu.
4. Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot. -
I'm trying to write an Applescript. I have never used Applescript but my boss has just asked me to write a script so I dutifully nodded and said "Yes Boss"...
The funtionality I need is that I want finder to rename the files in folder when I drop a new file in. When I add the new file (file neame: "1") to a folder, I want to increment the other file names in the folder by 1.
So when I drop a my new "1" file into the folder, the file original file called "1" will be renamed "2", the original file named "2" will be renamed "3" etc
I'm creating a 'stream' of images. When I add a new image i want it to nudge the other images in the folder along.
Thanks guys!Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/1986834#1986834 -
What does the "Other" signify on the "Capacity" indicator in the 'Summary'?
I was wondering if someone knew what the "Other" section in the Capacity Indicator at the bottom signifies? What files are included in it and how can it be accessed? It has eaten up almost 100 MB of my iPod disk, but I have no idea what the content is. Any idea ppl?
Other can be Album Artwork, Notes, Contacts, Firmware etc.
On my iPod the artwork is 60.5 MB. This can be more or less for you depending on how many songs you have with artwork. The control software takes up another 29.2 MB. -
What items are in the "other" category on the iPad
What is in the "other" category on the iPad (i.e., there is audio, photos, etc.) and the end, there is an "other" tab. These tabs show how much space you are using. My "other" category is showing 8GB used. Have no idea what that is, but it is taking up all my space on my ipad.. Thank you
See this document for a comprehensive list of what is in Other and how to deal with it.
https://discussions.apple.com/docs/DOC-5142 -
Can't see the other Mac on the network
I have a iMac G5 and a MacBook Pro connected via wirelss at home. Sometimes I can't see the other Mac in the Network folder, however I can connect to the other Mac (even I can't see them in the network folder) by afp the IP address via Safari... I have enabled the "personal file sharing" option in both of the machine.
Help please.
SamuelSam,
I've had the same problems numerous times myself: the other Macs don't show in the network folder. Why? I'm not too sure myself, I've been given several possible explanations by the geniouses in San Francisco. However, the best trick to connect is via the Finder 'Go to' menu. The very last item should say something like "Connect to server..." -which is the same as the 'Command-K' combination of keys. That'll bring up a list of the last few servers on the network, and al you have to do is choose the one you want, and voilà!
* Guy
Maybe you are looking for
-
cant sync iPod touch. comes up with "cannot be synced because there is not enough free space to hold all of the items in the iTunes library (21.6MB required, 304.8MB available)." I am so confused. I have more than enough space even on PC.
-
Dual boot enviorment on primary IDE channel Diamond Plus tried everything!!
Whats up everybody? For some reason I am unable to achieve a dual boot enviorment on my primary IDE channel! I have tried numerous things and for the life of me I cant get it to work! I just bout a new Hitachi 250 gb ultra ata 133 drive and it works
-
Specific Destination Address Lookup?
Now on a dedicated GPS device, you can enter an exact destination address, and the GPS device can find it, quickly, and create a route to your destination. Does Nokia Ovi Maps support direct address lookup on the phone? I have not been able to get i
-
Software and hardware requirement of Discover 4i?
What is the software and hardware requirement of Discoverer 4i? What is the requirement also for application-mode? I mean the application side.
-
Why is the background on the monitor fuzzy when I install dreamweaver cs 4 on windows?
Why is the background on the screen fuzzy when I install dreamweaver cs 4 on windows XP? Message was edited by: toaoaoa