Identical pages with different names on website

Hi, I've recently put up a new website which completely
replaces the old one. I'm about to delete all the old pages off the
server, but I notice they're still coming up on google. Is it bad
practise to replace the old pages with my new ones, and leave two
copies of the page on the server but with different names? Eg, the
new page about restaurants and entertainment is called
"restaurants_entertainment.html" but the old page is just called
"restaurants.html". So I was thinking I could save my new page as
'restaurants.html' and put it onto the server as well, so that when
users click on the search results they get taken to the new
restaurant page and not the old one. I'm thinking this is not a
good thing to do? just wanting confirmation from the
experts...

It's best, whenever possible, to give your new pages the same
filename as
your old pages -- so that basically, you're just replacing
the content on
each page.
If that's not possible, you need to 301 redirect from the old
pages to the
new pages, e.g., redirect from restaurants.html to
restaurants_entertainment.html, so that when people click on
the "old page"
in Google, or from their bookmarks, or in a link on another
site, they will
end up at your new page.
Sonjay
On 11/9/08 7:44 PM, "just_carly" wrote:
> Hi, I've recently put up a new website which completely
replaces the old one.
> I'm about to delete all the old pages off the server,
but I notice they're
> still coming up on google. Is it bad practise to replace
the old pages with
> my
> new ones, and leave two copies of the page on the server
but with different
> names? Eg, the new page about restaurants and
entertainment is called
> "restaurants_entertainment.html" but the old page is
just called
> "restaurants.html". So I was thinking I could save my
new page as
> 'restaurants.html' and put it onto the server as well,
so that when users
> click
> on the search results they get taken to the new
restaurant page and not the
> old
> one. I'm thinking this is not a good thing to do? just
wanting confirmation
> from the experts...
>

Similar Messages

Identical images with multiple names

Hi
i'm trying to clean up my iphoto library (iphoto 08, version 7.1) by manually deleting old photos and duplicates. I have come across old photos (brought from iphoto 04) that appear to be identical but have different names/titles and have been placed in separate events by iphoto 08: some have "jpeg" in the name, others do not (but are still jpegs). Sometimes the image numbers do not match. (These were all taken with the same camera.) Generally, the non jpeg images do have more MB.
Are these just edited versions of the same photos? Which are the originals? Is there a quick way to determine which to save? What's the most important piece of data to look for when comparing photos?
some background info: i did have to rebuild my thumbnail cache after transferring my old photos to iphoto 08.
thanks!
Kateroo

Kateroo:
Did you import your older library into a new iPhoto 08 library? If so that's why you would many duplicates of the same image as iPhoto would import the modified files as well as the original and, for some strange reason, import multiple copies of the modified files.
There are two application that you can try to cull out the duplicates in the library: Duplicate Annihilator and iPhoto Diet. I would make a temporary backup copy of the library before running either application in case the results are not what you expected.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

TS4009 I seem to have 2 iCloud accounts with different names - a free storage that came with my Macbook and one I used when I bought some iCloud space. How can I cancel the free account?

I seem to have 2 iCloud accounts with different names - a free storage that came with my MacBook and one I used when I bought some iCloud space. How can I cancel the free account? Because of this I can't access iMatch and the ICloud account I paid for on my MacBook
Any ideas cos its frustrating that I can't access something I paid for!

Sign out of the account you do not wish to use, sign into the one that you do wish to use.

Install many executable on the same PC with different names

Hello,
I'm trying to install several executables with different names in the same computer but at the end of install process the message is : "an higher or existing version is already installed in this computer"
I create the Executable and Setup with LabVIEW Application Builder and install the executable in the same Program Files root directory with a different sub-directory for each executable as this : Program Files-->MyProject-->SubProjet1 with exe1/SubProject2 with exe2 etc...
My OS is WinXP pro SP2 and I work with LabVIEW 8.5.
Thanks and regards,
Armindo PINTO

Hi Armindo,
Thank you for using the NI forums!
From what I understand, you are trying to create multiple executables of a vi project to co-exist on the same PC. Any time you re-use the LabView 8.x project file, it will generate
install package with the same product ID number. That means, if the
deployed PC has the previous version installed, which had been
generated from the same project file, the new install package will
remove the previous version and overwrite it with the new version. Or as in your case, not allow you to install lower versions of the executable. That
means, the previous version will be no longer available on the deployed
PC. If you are creating an upgraded version to the product this is
fine.
However, if you need to re-use the LabView 8.x project
file and generate a new product, which can potentially co-exist with
the previous on the end user PC, you need to generate a new installer
with a different product ID number. One of the way to do it:
Copy existing project file (e.g. "name1.lvproj") under a different name (e.g. "name2.lvproj")
Open the new instance of the project
Expand the "Build Specifications"
Right click on the installer specification, e.g. "name1 Installer"
Select "Duplicate" from the menu
You can now delete the instance "name1 Installer" and rename the "Copy of name1 Installer" to a suitable name, e.g. "name2 Installer"
Make changes that are needed between the two versions, for example:
Select a new source VI
Build a new exe file
Reflect the new exe file in the "name2 Installer"
Make
any other changes needed in "name2 Installer", for example different
documentation files included in install, change in the target install
directories, changes in the start menu shortcuts. etc.
Build the install.
Please let me know if this solves the issue, and let me know how you get on.
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK

Export as Separate PDF Pages with Unique Names

I have an InDesign document that has several pages. I want to export each page as a seperate PDF, but they have to have a unique name that I want to be able to specify.
For example, I want to export page 1 as "calendar page 2014"
Page 2 as "Diary page 2014" etc.
I found some solutions, but they aren't quite what I need:
Export as Seperate pages with image name
This apple script takes the name of the first image on the document and uses that as the name.
However, my document has no images.
Exportools
A paid tool that offers many options for exporting. However, the name has to be based on a pattern, which is no good for me.
I'm hoping that there will be a script that can take the name from a non-printing area/layer. That way, I can just put the desired name on the page and it will export with that name each time.

have you looked at the extention Autosplit PRO? This may be what you are looking for. (Although, I don't think this software is compatable with MAC...but if you find out otherwise, please advise!)
good luck..

Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting? T

I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL?

Sending attachment with different name

Hi,
is it possible to send attachment with different name with javaMail?
If possible, is there a sample code to do it?
Thanks.
Edited by: user1071181 on Aug 6, 2011 2:14 PM

Hi,
I listed some of my code at below.
But i did not find attachFile method for messageBodyPart class.
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setDataHandler(new DataHandler(new MemoryDataSource(....getPDFObject())));
messageBodyPart.attachFile("abc.pdf");
messageBodyPart.setFileName("abc_2011_08_07.pdf");
messageBodyPart.setHeader("Content-Type", "application/pdf");
multipart.addBodyPart(messageBodyPart);
message.setContent(multipart);

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Look for files with different names

Do we have any utility or command in solaris 8 where we can check for files in two folders with different names and display them somewhere? Manual search for such files becomes very difficult when there are a large number of files in the folders. Please suggest.

Check with an Unix forum like http://www.unix.com

Unable to copy database with different name in the same instance

I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang

Copying a script name with different name

Hi,
I want to copy my script form which has name zform1. Now i want to copy the same script form with different name i.e zform2 in the same client.
in my se71 window i do not have a copy icon on the toolbar.
pls. help me on how to do this.
Thanks,
Rose.

Hi,
Please follow the steps below :-
1. Create a SCRIPT with the new name and just save it ( No need of defining any windows, just shot description is enough).
2. Open the newly created script in change mode and go to the tab 'Form' and press 'Copy from..' .
3. A small wondow will pop up, wherein you need to enter your previous SCRIPT name.
4.Once done, your script will be copied.
Please reward points if helpful.

Save Task with Different name in workspace

Hi,
While using SAVE button in workspace, is there a way to save tasks with different names?
steps:
      1) Click on start Process in workspace - Complete task order
       2) Click on save button with some data.
                  - Is it possible to change the name here?
if there are 50 tasks named "Complete task order" in To-do list, users want the ability to rename task.
Any help is appreciated.
Thanks,
Krishna

Hi,
While using SAVE button in workspace, is there a way to save tasks with different names?
steps:
      1) Click on start Process in workspace - Complete task order
       2) Click on save button with some data.
                  - Is it possible to change the name here?
if there are 50 tasks named "Complete task order" in To-do list, users want the ability to rename task.
Any help is appreciated.
Thanks,
Krishna

Must I define abstract interfaces with different names for BPM?

Must I define abstract interfaces with different names for BPM?
When interface appeared several times with different values and usage.
Of course they are the same message type.

Hi,
Check this
RFC Scenario using BPM --Starter Kit
Regards
Seshagiri

Same SKU with different names in 2 systems

Hello All,
I am wokring on a SNP scenario. We have a finished sku A and its sub component sku C.
A (FERT) ---> C (RM)
We have forecast on sku A and want to find dependent demand in sku C thru SNP
Forecast A -
> Find Dependent Demand C
sku A maintained in ERP1 R/3 system as FERT
sku C maintained in ERP 1 R/3 system with different name sku B as Raw material
sku C maintained in ERP2 R/3 system as FERT
Now product A is maintained in one R/3 system and product C is in another R/3 system. Both these R/3 systems are connected to APO and both these materials are also in APO now.
After heuristic planning in SNP, we want to pass the dependent demand to ERP2 system as Sales Order.
My concern is if sku C has different name in 2 systems, how should I pass the demand to other system?
Please advice.
Thanks,
Sanju
Message was edited by:
Sanju

Maybe you can create SKU D in APO (and R3) which is lined through PPMs or PDS to SKU B from ERP1 and SKU C from ERP2 and aggregate the dependent demand generated during Heuristics to SKU D
then you can only transfer only SKU D to ERP2? Am not sure how important it is for you to hav the link between SKU D and SKU c in ERP2
Alternately
Dont transfer SKU C from ERP2 to APO. Only create Dependent demand for SKU C from ERP1 and transfer it to ERP2. You can run MRP again in ERP1 for the aggregated requirement (unless you want some APO specific functionality, the result must be close to what you will get in APO)

Identical pages with different names on website

Similar Messages

Maybe you are looking for