Identify OSS Notes Applied to J2EE Stack

We are running CRM 5.0  Netweaver CRM 5.0 2004s.  We have applied several OSS Notes to the Java stack in DEV, QA, and PRD.  Is there any way to determine which notes have been applied, short of re-applying the notes?  Some of you may remember life before transaction SNOTE on the ABAP stack.  The J2EE engine seems to be at that same stage, with no easy way to determine patches applied.  Am I missing something?
Best regards,
Mike

Thanks Timo,
I realize there is no equivalent to SNOTE on the Java side, but is there any way to determine which notes have been applied, short of re-applying?
Take care,
Mike

Similar Messages

  • Oss note applying

    Hi,
      Now am applying Oss Note according to Note documentation. i applied note  for Abap code correction but I am getting Errors .
    What i have to do? can i raise Oss for that or not

    Hi,
    There may be some prerequisted notes or manual corrections for that note. go through all the documentaion provided in note.
    Regards,
    Srinivas ch

  • SAP notes applied to a TX

    Hi Experts
    I am investigating a probelm  related to some TX's e.g MB1B, MIGO.
    How do I know that what SAP notes have been applied to a SAP tranasction.
    Pls advise.
    e.g. I may have to apply a SAP note to a TX but before that I want to make sure that what notes have been applied so far
    Regards
    Gaurav

    The program related to MB1B...., MIGO is <u>SAPMM07M</u>, please check the program and program versions. If there are descriptions or comments maintained while applying the note then you can easily find it. Or please check the transaction SNOTE which will list you all the oss notes applied,
    Also please check SPAM transaction from which you can find the package name of the OSS note in which it is included.
    In every Oss note it will be mentioned in which support pack this OSS note belongs to, please check if that support pack exists in your system then it is implied that this Oss note is present in your system.
    Hope this helps you.

  • J2EE failover HA OSS note  1085521 - startup with primary db2 unavailable

    We have implemented J2EE HA failover solution according to OSS note 1085521.
    We have an SAP system called SXD with primary db2 SXD1 and standy db2 SXDA.  If JAVA is running against SXD1 and this Db2 subsystem is stopped/abends, then JAVA switches over to continue running on SXDA. However, if we then cycle the JAVA instance, it does not startup any more until we restart the primary SXD1 Db2 subsystem. Is this the way the design for the JAVA failover works, or do you think we must have an incorrect setting somewhere ?
    The ABAP stack of the same SAP system works fine and can be restarted without problems even when the primary Db2 is stopped.

    This problem is resolved after implementing latest 1085521 recommendations and upgrading to Db2 connect v9.5

  • How to apply OSS note and how to use it?--thanks

    Hi, morning all,
    I want to know how to apply OSS notes and how to use it, pls help me.
    Thanks.

    Applying OSS note is a critical activity in the system. Usually this task is carried out by the basis, as they maintain the system and the notes, support packs, etc.
    A OSS note has potential to impact the system in several ways. So it is better to work with the basis if  you need to apply a OSS note to be applied.
    Transaction code is Snotes. But pl dont attempt to apply by yourself.
    Reg your other question as how to use the OSS note, there is nothing like using aOSS note. Just apply and depending on what the notes do, it may change the config, or download a program or something.
    Ravi Thothadri

  • Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

    Hi friends,
    Getting the below error in step 10 (configuration check) in managed system configuration.
    The SMD Agent is not able to connect the Satellite System (J2EE stack).
    Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
    System.
    java.rmi.RemoteException.P4 Connection failed -
    P4AuthorizationException -
    com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
    Access is denied to SAP System sid [XYZ/null]: check the connection
    credentials.More details about the error in agent 'xyz' log file
    (SMDAgentApplication.X.log).; nested exception is:
    com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
    authenticate the user.
    The SMD log file referred to in the log above gives the same information and not anything much useful.
    Any idea what could be the reason for the above error?
    Thanks,
    Arindam

    Hi All,
    Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
    The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
    Hi Khaja,
    I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
    All I am getting is this -
    The SMD Agent is not able to connect the Satellite System (J2EE stack).
    Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
    java.rmi.RemoteException.P4 Connection failed -
    P4AuthorizationException -
    com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
    Access is denied to SAP System sid [XYZ/null]: check the connection
    credentials.More details about the error in agent 'xyz' log file
    (SMDAgentApplication.X.log).; nested exception is:
    com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
    authenticate the user.
    Thanks,
    Arindam

  • Use solution manager to create customer message and apply oss notes

    Hello All,
    Is it possible to use SAP Solution Manager to create/ open Customer Messages and for the application of OSS notes in satellite systems via solution manager?
    Currently, our Solution Manager system is bieng used for Central System Monitoring!
    Please let me your your expert thoughts!
    Thanks,
    Antarpreet

    Hi,
    By using Service Desk scenario of Solution Manager you can convert an issue to an OSS message and follow it up.
    Refer the  [Link|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
    Snote application is also integrated with this Service Desk, you can apply SAP notes to any satellite systems.

  • No change request created when applying OSS Note

    Hi,
    I have applied around 3 OSS Notes to my ECC 5.0 system. I got a promt for the change request creation. I have created a new change request and then saved it.
    But when I applied the next 2 OSS Notes, i didn't get any prompt to create or select the existing request.
    How can I create a change request for this application of OSS Notes and how to transport them to quality if i dont have a request number?
    Thanks
    Vijay

    Hi Vijay,
    I think this is normal if the objects being changed by the OSS Note are already held in an earlier change request owned by you (or others) and has not been released.
    Use transaction SE03 to search for the objects being changed by the OSS Notes (you will get object name in the note itself) and find out which change request is holding the object.
    Once you find the change request either unlock it or release it (depending on your company process/policies) and then re-implement the OSS Note.
    Hope that helps.
    Regards,
    Siddhesh

  • Where do i find OSS notes and how to apply them

    hi,
    i have never applied OSS notes .
    so wanted to know where can i find the OSS note(444966)
    and what is the procedure to apply it

    Hi siddharth,
    1. Now its on net.
    2. http://service.sap.com/notes
    3. This is the site where sap notes can
      be found.
    4.   But,
    U will have to contact ur basis team
    There u need a user id and a password.
    (It might be some common userid and pasword
    which ur basis team might be able to provide)
    regards,
    amit m.

  • How can we apply OSS notes in BW or BI.

    Dear Friends , how are you all.
    Could anyone please tell the process about How can we apply OSS notes in BW or BI.
    What is the difference between LO extractors and FI extractors.
    It would be helpful to me.
    Thanks in Advance,
    Kalyan

    Hi,
    Using T Code SNOTE we can apply the OSS notes.
    Also
    OSS is Online support system runs by SAP to support the customers.
    You can access this by entering OSS1 transaction or visit Service.SAP.Com and access it by providing the user name and password.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fe8dbb80-0c01-0010-fe84-b76d0d07db34
    SAP Notes
    IN BW T.Code SNOTE, here you can see all the notes which has been applied.. also u can apply a new note in this T.Code.
    http://service.sap.com/notes
    Whenever there is a short dump, in section 'How to correct the error' keywords are given so that you can search relevant OSS
    Notes.
    Best way is to search with the Note Number if you know one. Else, you can search with restriction by giving proper version,
    application area, priority, release status etc along with keywords.
    Thanks,
    JituK

  • I'm facing problem while applying OSS Note 1046758

    Hi gurus,
    I'm facing problem while applying OSS Note 1046758. That note is asking to create <b>J_1IEWT_ACKN_N</b> table.
    After creating the table I went to the UTILITIES menu => TABLE MAINTENANCE GENERATOR.
    Then OSS Note 1046758  is asking us to give the function group name as <b>J_1IEFILE</b>.
    Next Choose <b>One Step</b>.
    and then <b>Find Screen Numbers</b>.
    While clicking the CREATE button it is not allowing me to assign the function group group J_1IEFILE.
    How to overcome this problem.
    Very urgent.
    Any answers are welcome and will be rewarded .
    Regards,
    Jacob Charles S.

    Hi Sheeba,
    I have applied the follwoing notes.
    1046758 -- To display acknowledgement number in Form No 16A
         558469
         983795
         498087
         912767
         773171
         891923     -- 452805  (Correction Made)
    905220 -- Blank Values for TDS, Surcharge & Ecess in new certificate
         923216
         833092
    984623 -- J1INCERT:Consolidated Issues - SEP 2006
    Eventhough I'm not getting the those values in the respective fields.
    I mean, TDS Rate, ECESS Rate and CHENCK NUMBER.
    More over, I want the FROM 16A should contain the Higher Education CESS field with values.
    any notes has to be applied apart from this or what....
    Wht are the table I have to maintain for this in SM30.
    Kindly help me... It's urgent...
    Regards,
    Jacob Charles S.

  • Applying OSS notes?

    Dear Friends,
    i want to know how to apply OSS notes in the BW or R/3 system. Please help.
    Thanks
    Raj

    Hi
    go to the tab correction instructions, select the appropriate ref correction depending on your release
    Have a look at the object type (MF or program) copy the object name go to se37 or SE38 depending on the object fill the object name and follow the instructions "delete block" or " insert block" to apply the note.
    Hope this helps and that responds to your question
    regards
    Boujema

  • How to find whether an OSS note is applied in the system?

    Hi experts ,
    Can anyone explain how we can find if an OSS note is applied in the system.
    Please respond to the query, points will be awarded .
    Best Regards
    Anand

    Hi Subodh,
    Thanks for your reply and valuable information.
    I could not checked for snote and SPAU as I am not authorized. suppose a note has been applied throgh SNOTE , can we find this note in the code ?
    In my case  a particular note is applied for MM02 but when I check code I could find several note but not the note being disuceed.
    I will try to check with some one authorized for SNOTE in my client.
    Thanks again.
    Best Regards
    Anand
    Edited by: Anand Tripathi on Jan 19, 2008 7:52 PM

  • Apply OSS note

    Hi BI experts,
    What access is required to apply OSS notes. one i know is SNOTE. Do we need OSS2 . Could you recomend me other transactions. I need to apply OSS notes. I need to ask for access to various transactions.
    Please suggest.
    Regards,
    BWer

    Diego,
    Thanks for the suggestions.
    Do you know what would be process using solution manager ?
    Regards,
    BWer

  • Applying OSS Note

    Hi,
      Can anyone tell me, how do I apply a OSS Note to any particular application after downloading the note from service.sap.com.
    Any help would be highly rewarded.
    Rgds,

    Hi Sailatha,
                You can apply the note that you have downloaded through the transaction SNOTE.But it is most important that you go through the steps specified in the note.It will tell you what needs to be done.If there are manual corrections required like changing the parameters then you cannot work with SNOTE.If you have an OSS note id then log onto OSS1 and you will find more info there.
    Cheers
    Nishanth

Maybe you are looking for

  • Help and Guidance required with host side programming

    Hi all, We have to connect the Java Card reader(+ Java Card!!) to an ARM powered embedded system running Debian Linux. Now basically we have to program the host program that will send APDUs to the card and receive responses from the card. This progra

  • Oracle 10g Lite Mobile Devices

    Hi, 1. Does Oracle 10g lite Support Arabic? 2. Does Oracle 10g lite Support Windows Mobile 5.0, PPC 2005? 3. On a PPC 2003 OS the sync worked well but after it finished the device manager started to register the device on the mobile server, there is

  • Do I have to use certificates when writing an HTTPS server

    I'm writing a client app and a server app. The client will connect to the server via HTTPS. A browser will never connect to this HTTPS server, just the client I have written. Can I skip the step of using certificates? I've been told it isn't a requir

  • Triggers jumping to the right of composition

    Ive created hundreds of pages using nested blank composion widget. Have the latest version of muse. Now when I try to use a single nested blank composition with one trigger the trigger continues to jump to the right of the composition. Once again I h

  • Multiple Available Values in Parameter

    I have a query like Select * from Table where column in (@Parameter) @Parameter has two choices.  Choice 1 value is 01 or 05. Choice 2 value is 04 or 06. If Choice 1 is selected for the parameter, I want the query to result into Select * from Table w