Identify type of ipod
Guys, I have been given an old ipod with no manuals or paperwork. I'm trying to buy a car cigarette lighter charger for it and thought they would be compatable.
I have just one which didn't work on mine but works on a modern ipod.
So I need to work out what model I have.
I believe its about 6 or 7 years old, maybe more.
I think its a third generation which causes the problem because I get sent stuff for a modern 3rd generation.
Its about 100mm x 70mm white. It has the click wheel with four buttons above.
It has a 20gb drive.
I can find two serial numbers, one on the back U23430JDPNT, and one in the software model M9244B.
Please can someone identify mine and tell me where I can get a working charger.
Thanks Bob.
You seem to be confusing terms.
I think its a third generation which causes the problem because I get sent stuff for a modern 3rd generation.
There is no "modern" 3rd gen full-size iPod, although there is a recent 3rd gen iPod nano (current version of the iPod nano is 4th gen).
Its about 100mm x 70mm white. It has the click wheel with four buttons above.
A "click wheel" is the one that clicks down at the four compass directions (which is why it is called a click wheel). If the wheel is touch sensitive but does not click down and there are four round touch buttons between the wheel and screen, you have a 3rd gen iPod, aka +iPod (Dock Connector)+.
Your charging issue with the 3rd gen iPod is because it was designed to be used with FireWire. It only charges if you connect it with a FireWre docking cable. I believe this is because the voltage between FireWire and USB charging is different (and all current iPods use USB charging). Therefore, you would have to find an old product that was sold back when these iPods and the 4th gen were being sold as new.
Do you have the square white FireWire power adapter that came with those iPods? If you do, or can get one (along with a FireWire docking cable), you can get one of those car lighter adapters that let you plug in regular two-prong power cords. Then just plug in the standard FireWire power adapter.
Similar Messages
-
Can I use more than one type of iPod on my computer?
Hello! I just purchased the iPod 80GB but I also have the second generation shuffle. My husband now wants the shuffle. With there be any problems with setting up my new iPod in regards to over-riding anything my shuffle has on it? Can I use two different iPods on the same itunes account?
Dell Windows XPYou can use multiple iPods on one computer after going through the iPod Setup Assistant, and they can be different types of iPod.
(18717) -
How to change your type of ipod in itunes
How can you change your type of ipod in itunes. We purchased a new Ipod touch and the computer/itunes will not reconize it.
Try:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Make sure you have iTunes version 10.5 -
My itunes allows me to dcownload songs but is having difficulty identifying my new ipod nano and so can't set up song lists. It is not allowing me to access Netflicks anymore. Any ideas.
I have sorted it myself!!
Ipod is now in the top right corner, last time I clicked on it, it ejected it but by clicking on the actual ipod icon then it brings up your ipod. I restored it to factory settings and synced all my music and it now works again. Hope this can help anyone who ends up with the same problem. -
We have two types of Ipods. A nano generation 5 & a nano touch, and we are unable to download music to them was told its because we have an Acer Android tablet. Could someone please help us in solving this issuses cause we just bought these ipods and was not aware that and all we have is this tablet. .. Please help us
Templeton Peck, the Android tablet does not support iTunes
Angs78, you purchase music from iTunes on the iPod touch. I know of no way to get music on the Nanao from the tablet. -
How in CF8 I can identify type of cfinput/input???
Hello to all!!!
How in CF8 I can identify type of cfinput/input??? For
instance, I want to make some code for <input type="text"> or
I want to get all form fieldnames with exception "submit"
Thanks for your answers!!!!vovasvv wrote:
> Hello to all!!!
> How in CF8 I can identify type of cfinput/input???
Where do you want to identify the form control types?
In the Client Browser you would use normal JavaScript to
examine the DOM
of the controls and look at the type properties.
On the server after a form is posted it does not matter. Form
data is
all name-value pairs and HTTP makes no distinction on what
type of from
control generated the name-value pair in the post|get data.
On the server while a template is building HTML content
containing a
form to be delivered to the Client. Then just examine the
page content
as it is being built or just before delivery.
Some help with the later functionality will be building your
HTML into
variables before delivery, accessing the underlining Java
pageContext
object and|or using onRequest() or onRequestEnd()
functionality of an
Application.cfc component to intercept the content before
delivery to
the web server. -
Do all IPOD USB drives connect into all types of IPOD's??
Someone wanted to sell me a sync and charge USB Cable Cord for iPod Video Nano Mini and I own a regular, full size Ipod (i.e. it is not a nano, shuffle; it is just a regular big ipod). Will this USB cable cord connect and work with my regular ipod?
Just to clarify, you need to be using a third generation or newer full-size iPod to sync over USB, and a fourth or fifth generation iPod to charge from a computer's USB port. The first and second generation full-size iPods can only connect to a computer through FireWire, and do not have any USB ports. You can use the instructions in this article to determine which type of iPod you have.
(17249) -
What is the latest firmware restore for all type of ipod ??
*can anyone tell the latest firmware for all ipod types*
see if this helps
http://www.felixbruns.de/iPod/firmware/ -
Need formula to identify type of transaction
Post Author: skootsu
CA Forum: Formula
I am putting together a report on parts from a transaction table. Each transaction is identified with either a sales order, workorder or purchase order. I need to create a field that will contain an indicator based on which field is filled. Like C for customer order, W=workorder or P=purchase order. So I can group and total by this type.
I can't tell what is missing but I'm either getting a 'W' (on correct records) and blanks for the cust.and purch. order records. Or if I get an error on the formula. I'm thinking its the syntax but can't tell where. Heres an example of what I have for my records.
@UsageTypeIf {INVENTORY_TRANS.WORKORDER_BASE_ID} <> " " then "W"else if {INVENTORY_TRANS.CUST_ORDER_ID} <> " " then "C"else "P"This gave me a 'W's correctly but blank for everything else.My first three records read,INVENTORY_TRANS.TRANSACTION_DATE:6/17/07INVENTORY_TRANS.PART)ID:9000 80000-182-0-29INVENTORY_TRANS.TRANSACTION_ID:447515.00INVENTORY_TRANS.WORKORDER_BASE_ID: (blank or null)INVENTORY_TRANS.CUST_ORDER_ID:SO516221INVENTORY_TRANS.PURC_ORDER_ID: (blank or nullINVENTORY_TRANS.QTY:1.00@UsageType: (blank)INVENTORY_TRANS.TRANSACTION_DATE:2/28/07INVENTORY_TRANS.PART)ID:9000 80000-182-0-29INVENTORY_TRANS.TRANSACTION_ID:398,861.00INVENTORY_TRANS.WORKORDER_BASE_ID:16644INVENTORY_TRANS.CUST_ORDER_ID:(blank or null)INVENTORY_TRANS.PURC_ORDER_ID: (blank or nullINVENTORY_TRANS.QTY:1.00@UsageType:WINVENTORY_TRANS.TRANSACTION_DATE:5/22/07INVENTORY_TRANS.PART)ID:9000 80000-182-0-29INVENTORY_TRANS.TRANSACTION_ID:435025.00INVENTORY_TRANS.WORKORDER_BASE_ID:(blank or null)INVENTORY_TRANS.CUST_ORDER_ID:(blank or null)INVENTORY_TRANS.PURC_ORDER_ID: 28514INVENTORY_TRANS.QTY:1.00@UsageType:(blank)Then I tried the second method,not(isnull({INVENTORY_TRANS.WORKORDER_BASE_ID}))then'W' elsenot(isnull({INVENTORY_TRANS.CUST_ORDER_ID}))then "C"else "P"This is giving a "remaining text does not appear to be part of the formula" error.Any one have any tips/hints? I'm guessing the syntax is not correct. We are using Oracle.Post Author: V361
CA Forum: Formula
Try this....
if not(isnull({INVENTORY_TRANS#WORKORDER_BASE_ID})) then 'W' elseif not(isnull({INVENTORY_TRANS#CUST_ORDER_ID})) then "C"else "P" -
How do I identify which generation iPod touch I haver
How do I identify what generation my iPod touch is? The iOS is 5.1.1 and iTunes and the iPod say the software is up to date.
You have a 3rd generation iPod based on the fact that iOS 5.1.1 is the latest version for it.
-
Using windows 8 - receive message "ipod detected but cannot be identified properly" when connecting ipod nano 7th gen. Have unisntalled and reinstalled itunes from apple site as advised with no luck. Has anyone else had this problem and resolved it please?
This is how it's displayed: http://i50.tinypic.com/nd7vk7.jpg
And this is what happens when I click properties and 'search for solutions': http://i47.tinypic.com/2iu3vrc.jpg (the box disappears after that, apparently having done nothing, when I search online for software it informs me my computer already has the best/latest installed)
I use a Toshiba Satelite L350-170, my Vista is a 32-bit Thankyou!
Message was edited by: Martha11 -
Edit - Item-Mask - Identifier Type Pattern Rule
Hi
I need to have the mask for the text item like this.
1. No Space or tabs, or punctuation marks allowed
2. Start with Alphabetic Char
3. Then Any number or Alphabet or underscore
- This is in general known as the standard identifier pattern
rule in many languages.
How do I Achieve this oracle Forms.
Any HINTS!!
Thanking you in anticipation
Regards
Santosh
nullHi yxrkt,
I'm afraid that you would custom the data type with the debugger extension.
This blog shared us a simple sample about "how to create a type visualizer for a custom data type", maybe it could provide useful information for you.
http://blogs.msdn.com/b/vcblog/archive/2012/07/12/10329460.aspx
The MSDN document shared us some information about how to create custom views of native objects in the debugger.
https://msdn.microsoft.com/en-us/library/jj620914.aspx?f=255&MSPPError=-2147217396#BKMK_Expressions_and_formatting
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can't change credit card type on Ipod to set up Itunes account
I'm trying to set up an Itunes account and the Ipod touch won't allow me to select any credit card but Visa... Help!@
If you owe iTunes money then you won't get the 'none' option until you've paid what you owe. What happens when you try to enter your new card's details, if you are getting an error message then what does it say ?
For a card to have a chance of being accepted it needs to be registered to the same name and address (including format and spacing etc) that you have on your iTunes account, and have been issued by a bank in the country where you and your iTunes account are.
If the problem with adding a card is something that only iTunes Support can help with then you can contact them via this page : http://www.apple.com/support/itunes/contact/ -
Hi
1.How to identify whether a webtemplate(3.x) is using static reports or dynamic reports?
2.Suppose if we have query technical name and we go to query designer and open the query,how do we notice if its a static report or dynamic report?
Thanks.
Regards.....Hi experts
Thanks for your replies.
I am just asking to know if its static report or dynamic report by looking at query definition in Query designer.As I understand,if a query uses variables,as we can choose which data we would like to see,it becomes dynamic report.
If a query doesnot use variables and filters are fixed,then its static report.
am I right?
Thanks. -
Converting .avi files into .mp4 .mov or any other file type for ipod
Hello!
I've got .avi file and i want to convert it into any playable file for my ipod is there some program? i've checked quicktime links and i ended up at a page with a 30 euro bill...
anyways can anyone help me?You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum
Maybe you are looking for
-
Wait for move complete not waiting for timeout
Hi, I am running a small rotary stage with a 7358 motion controller. Occasionally when I command a new position, the "wait for move complete" seems to get triggered almost immediately even though the move is not complete. Since I have put in a "halt"
-
Premier pro.. has an update become available recently on CC ?
I have noticed several articles on Flipboard about an update to Pr. Is this avialable ? it does not show as update on CC. Thanks
-
Using three tabbed panels. Always prints the first panel for web users in any browser, and won't print the second or third pane when selected.
-
Address Book opens when Mails does
Every time I open Mail, 9 out of 10 times Address Book opens with it. This has been going on for weeks now and it really starts to irritate me. Anyone else having the same problem? I would appreciate any solution. Thanks
-
if scheduled backups are done using SBO backup in the servertools where are the log files of the backups written to? I see only two paths are defined, the "backup directory" and the "backup temp", but no log files.