Identifying attached USB devices

Is there some way to get a list of attached USB devices and their speed (i.e. USB 1.1, USB 2.0)?
 20" Intel iMac (2.0GB RAM, 500GB HD + 1.5TB external, 20" Cineama Display) Mac OS X (10.4.7) All tools, no talent!

I guess the manuals would if I could find them I'm pretty sure the hubs I've added are all 2.0. In the Window's world, if you plug a USB 1.1 device and USB 2.0 device in the same hub it warns you that the faster device may not work at the faster speed. I've found this to be true. I've been getting some strange results with my USB devices on the iMac so figure it's time to separate the 1.1 and 2.0 devices to different hubs. We shall see.
 20" Intel iMac (2.0GB RAM, 500GB HD + 1.5TB external, 20" Cineama Display) Mac OS X (10.4.7) All tools, no talent!

Similar Messages

Unable to attach USB device in XP Mode on Windows 7 enterprise x64

I am using XP Mode on win 7 enterprise edition x64, when i try to attach USB devices on XP Mode i receive the below message
''Could not attach the USB device. You can attach the USB device to the different USB port or restart the virtual machine and try again"
USB devices works fine on windows 7 but not in XP Mode.
Any suggestions please..

Hi,
From what I have known, not all USB devices will work under XP Mode hubs.
Also, Windows 7 XP Mode is not capable of detecting or recognizing USB 3.0 ports on the host system. It is only capable of detecting and recognizing USB 2.0 ports.
Does the USB device can be detected in the host machine? On the host machine, go to Device Manager, check if USB Virtualization is installed, try to uninstall and re-install it for test.
Meanwhile, please refer the following article and check the result:
Scenario 2: Use a USB device in a virtual machine
http://technet.microsoft.com/en-us/library/dd744684%28v=WS.10%29.aspx
Regards,
Kelvin_Hsu
TechNet Community Support

Kit iPad Camera Connection: The attached USB device is not supported

Las fotos en las tarjetas SD tienen que estar dentro de una carpeta llamada "DCIM" en el raiz de la tarjeta. si no te da Error: The attached USB device is not supported.

lllaass wrote:
The Apple page for the CCK says: iPhone 3G is not supported. Do not know why this one iPhone is not supported.
Please post the URL. I remember reading specs where the iPhone 3G was singled out as not being compliant with an accessory and can't remember with one.
From Apple page on the CCK. The iPad is the only device that works with it. But, you can use it to transfer photos and videos between the iPad and iPhone. Go figure...

Can't attach USB devices in Windows XP Mode

I am still trying to set up my new Probook G1 450. It is presently in the original Win 7 Pro 64-bit OS.
I am trying to use Windows XP Mode. I can set up XP Mode, but I can't get USB access under it. But for me, the whole point of getting XP Mode is to be able to run two key programs which require USB access. The USB devices have been successfully installed in Win 7 (it's the programs that require XP Mode).
I have tried with VMLiteXPMode, Virtual Box, and finally with Windows Virtual PC. The results are about the same. I am presently trying Windox Virtual PC. When I access the USB button on the top of the XP Mode box, there is a list of all the USB devices. This looks like things are fine. All the devices are there. Hooray. Oops, too soon! It still doesn't work. One still has to "attach" the USB device, by clicking its listing under USB devices. When I do this, I get the following error message:
"Could not attach the USB device. You can attach the USB to a different USB port or restart the virtual machine and try again."
Yes, I can and have done all those things, and I get the same error message again and again and again. This is true for all USB devices (except the USB mouse, which works perfectly and automatically in XP mode and is *not* listed under USB):
* Epson Perfection scanner
* HP Laserject printer
* the computer's own HP HD Webcam,
and
* the computer's own Wireless/Bluetooth Device
For example, the scanner and printer will work well in the host machine, where I have installed them, but they can't be "attached" in XP Mode.
Notes:
* I have enabled "integration features"
* I have tried disconnecting and reconnecting the devices.
* If I try to install the printer in XP Mode, I can't do that, because this requires, at some point, the printer being plugged in to the USB. And I get the above error message when I try to attach it.
Also I have already had to deal with one driver issue (it came with the wrong driver for wireless; the right driver wasn't on the HP support page and couldn't be obtained by the computer's own "update' function), but when I finally discovered the right driver, wireless worked flawlessly
There is yet another possible driver issue, but I'll leave that for another topic later. One thing at a time.

@comvox
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Default Sound device with attached USB devices

Hi,
my situation: i've got an iMac 27" with an attached 24" cinema display (using display port and usb). Also i've plugged in a usb headset (headphone with microphone).
Whenever booting up Mac OSX 10.6.4 (also happened to older version of Mac OSX, at least all 10.6.x versions) OSX sets the default audio device (input, output and system sounds) to the cinema displays audio device. No matter what i choose as the default sound device i have to reset it after every boot.
Does anyone know how to come around this? I know i can easily set the device by alt clicking on the speaker symbol in the menu, i know there are tools out there like SoundSource that let me even more easily set the sound device but all i want to have is a default sound device that doesn't get overridden on every boot.
Any help?

All right, I seem to have solved it. The fact that it was only working using plughw: should have tipped me off, but at any rate, this is my working ~/.asoundrc:
pcm.!default {
type plug
slave {
pcm "hw:1,0"
ctl.!default {
type hw
card 1

Mounting USB devices in arch guest

I'm new to virtualbox, but not to linux. I have been using arch for at least 3 years, so I have some familiarity with it. I have recently installed arch as a guest OS on virtualbox (on OSX host). I am having some trouble accessing an attached USB device from the arch guest. I have defined the virtualbox USB filter for my device, and it appears to work, detecting the identified device and attaching it to the guest (at least as far as virtualbox is concerned). I can see the device in the virtualbox pull-down menu, and it shows with a "checkmark" next to it, showing (I think) that it has been attached to my arch guest.
Problem is, I cannot see the device from the arch guest. no entry in /dev for any USB device. symptoms are the same whether i insert ther USB device before or after starting the arch guest. I have HAL and dbus active in my guest. Also, I have made this work in arch installed natively. since there is no /dev entry, this might appear to be some form of udev issue? is there a specific udev setup that I should be aware of for arch as a guest?
Please help if you can. I will appreciate all comments and suggestions.
-dvh

hey, ive got Arch setup in virtualbox as well, and can mount usb's and cd's etc. (although with some issues i may need to bring up in another thread...) anyways, im assuming you have the PUEL virtualbox and not the OSE one?
also, your certain that you've mounted the correct USB (on the Virtual Box pull-down menu)? because you may have mounted a USB which was already attached to your host, and not the actual USB?
just checking, i dont know much about how to fix this issue so im just going at the simple solutions...

Help my ibook freezes when I connect usb devices

Hi there
I have had problems for weeks when I attached usb devices to my ibook. I have a usb (MAC approved) headset which caused the ibook to freeze when I connect it before or after startup. I also have a usb modem for a broadband connection which causes the ibook to freeze. The printer is usb also, but it only causes the ibook to freeze some of the time ????? I have run the hardware test disc, there were no errors. If anyone has any ideas I would really appreiate hearing them.
Cheers

Hi f,
Try an SMC Reset: http://support.apple.com/kb/HT3964

[SOLVED] Virtualbox list usb devices is empty.

I moved from virtualbox_bin(AUR) to virtualbox(community), and remove /proc/bus/usb entry in /etc/fstab, after that the usb doesn't work. I can check 'Enable USB 2.0 (EHCI) Controller' in Virtualbox settings, but can't find any available usb devices.
$ pacman -Qs virtualbox
local/virtualbox 4.1.22-1
Powerful x86 virtualization for enterprise as well as home use
local/virtualbox-additions 4.1.22-1
The official all-in-one VirtualBox Guest Additions ISO/CD image
local/virtualbox-ext-oracle 4.1.22-1
Oracle VM VirtualBox Extension Pack
local/virtualbox-hook 2.1-1
mkinitcpio hook to compile the virtualbox modules
local/virtualbox-modules 4.1.22-1
Kernel modules for VirtualBox
local/virtualbox-source 4.1.22-1
VirtualBox kernel modules source
$ VBoxManage list usbhost
Host USB Devices:
<none>
$ ls /dev/usbbox
ls: cannot access /dev/usbbox: No such file or directory
$ groups
log kvm network video audio optical storage users vboxusers guten input libvirt davfs2 virtftp
$ lsusb
Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. 2.0 Hub
Bus 001 Device 003: ID 05ac:8509 Apple, Inc. FaceTime HD Camera
Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 005: ID 05ac:0252 Apple, Inc. Internal Keyboard/Trackpad (ANSI)
Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in]
Bus 002 Device 004: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 001 Device 008: ID 05ac:821a Apple, Inc. Bluetooth Host Controller
Bus 002 Device 005: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 002 Device 008: ID 0951:1624 Kingston Technology DataTraveler G2 4GB Pen Drive
Bus 002 Device 007: ID 413c:2003 Dell Computer Corp. Keyboard
Last edited by GutenYe (2012-09-17 12:38:58)

I am having the same problem and have tried "everything" and still cannot get it to work.
calpoly@arch:~$ cat /etc/group | grep vboxusers
vboxusers:x:108:calpoly,root
calpoly@arch:~$ lsusb
Bus 004 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 05ac:12a0 Apple, Inc. iPhone 4S
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
calpoly@arch:~$ sudo pacman -Qs virtualbox
local/virtualbox 4.3.6-3
Powerful x86 virtualization for enterprise as well as home use
local/virtualbox-guest-dkms 4.3.6-3
VirtualBox Guest kernel modules sources
local/virtualbox-guest-modules 4.3.6-4
Guest kernel modules for VirtualBox
local/virtualbox-guest-utils 4.3.6-3
VirtualBox Guest userspace utilities
local/virtualbox-host-modules 4.3.6-4
Host kernel modules for VirtualBox
local/virtualbox-host-modules-lts 4.3.6-5
Host kernel modules for VirtualBox
calpoly@arch:~$ sudo VBoxManage controlvm windowSeven usbattach 609c101d-ef6a-401a-ad15-306f3e7bc8ae
VBoxManage: error: The USB device with UUID {00000010-0030-0000-90f9-0560b57f0000} is not currently attached to the host
VBoxManage: error: Details: code NS_ERROR_INVALID_ARG (0x80070057), component USBProxyService, interface IHost, callee nsISupports
VBoxManage: error: --------
VBoxManage: error: Could not load the Host USB Proxy service: VERR_NOT_FOUND
VBoxManage: error: Details: code Unknown Status 0x4005 (0x4005), component Host, interface IHost
VBoxManage: error: Context: "AttachUSBDevice(usbId.raw())" at line 973 of file VBoxManageControlVM.cpp
calpoly@arch:~$ sudo VBoxManage showvminfo windowSeven
Name: windowSeven
Groups: /
Guest OS: Windows 7
UUID: 609c101d-ef6a-401a-ad15-306f3e7bc8ae
Config file: /root/VirtualBox VMs/windowSeven/windowSeven.vbox
Snapshot folder: /root/VirtualBox VMs/windowSeven/Snapshots
Log folder: /root/VirtualBox VMs/windowSeven/Logs
Hardware UUID: 609c101d-ef6a-401a-ad15-306f3e7bc8ae
Memory size: 2048MB
Page Fusion: off
VRAM size: 128MB
CPU exec cap: 100%
HPET: off
Chipset: piix3
Firmware: BIOS
Number of CPUs: 2
PAE: off
Long Mode: off
Synthetic CPU: off
CPUID overrides: None
Boot menu mode: message and menu
Boot Device (1): DVD
Boot Device (2): HardDisk
Boot Device (3): Network
Boot Device (4): Floppy
ACPI: on
IOAPIC: on
Time offset: 0ms
RTC: local time
Hardw. virt.ext: on
Nested Paging: on
Large Pages: off
VT-x VPID: on
VT-x unr. exec.: on
State: powered off (since 2014-02-11T12:16:18.000000000)
Monitor count: 1
3D Acceleration: off
2D Video Acceleration: off
Teleporter Enabled: off
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: off
Allow Tracing to Access VM: off
Tracing Configuration:
Autostart Enabled: off
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0): IDE
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE (1, 0): Empty
SATA (0, 0): /media/disk/VirtualBox OS X HDD/windowSeven.vdi (UUID: 5c44157f-350a-467c-a988-b4cfb8635fd5)
NIC 1: MAC: 0800279A3907, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: PS/2 Mouse
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: ALSA, Controller: HDA)
Clipboard Mode: Bidirectional
Drag'n'drop Mode: Bidirectional
VRDE: disabled
USB: enabled
EHCI: enabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders:
Name: 'music', Host path: '/media/disk/music' (machine mapping), writable
VRDE Connection: not active
Clients so far: 0
Video capturing: active
Capture screens: 0
Capture file: /root/VirtualBox VMs/windowSeven/windowSeven.webm
Capture dimensions: 1024x768
Capture rate: 1024 kbps
Capture FPS: 25
Guest:
Configured memory balloon size: 0 MB
calpoly@arch:~$ sudo modprobe vboxdrv
calpoly@arch:~$ sudo modprobe -a vboxguest vboxsf vboxvideo
modprobe: ERROR: could not insert 'vboxguest': No such device
modprobe: ERROR: could not insert 'vboxsf': No such device
calpoly@arch:~$ sudo modprobe vboxnetflt
calpoly@arch:~$ sudo modprobe vboxsf
modprobe: ERROR: could not insert 'vboxsf': No such device
calpoly@arch:~$ sudo VBoxManage list usbhost
Host USB Devices:
<none>
Have rebooted and reinstalled virtualbox multiple times to no avail.
It is important to note that my iPhone used to sync with iTunes on Windows 7 in Virtualbox, but then I removed the USB filter and did some updates and now it no longer works.
I have spent many more hours than I care to admit on this problem, so please, any help is welcome.
Last edited by Kg4XmtUSyxd8B9M7Ex&&KXZGF (2014-02-11 12:33:00)

USB devices stop when ctrl key is pressed

We have a couple of Lenovo 3000 N100 notebooks that are exhibiting the same problem - with USB external mouse and keyboard attached, the "Ctrl" key on the notebook will kill the attached USB devices - the system gives a couple of audible warnings then the USB mouse will reappear - depressing the same key on the external USB keyboard does not give the same symptoms. Has anybody else had a similar problem? Very aggravating when trying to tag files etc..
Thanks,
gws

I thought something was wrong with the bugbase, but apparently I just needed to "save" my communication settings (the website won't let you do anything else until then).
Bug filed is here: https://bugbase.adobe.com/index.cfm?event=bug&id=3613482
It's not something everyone will see, but when it happens the result is confusion and a buggy feeling application.

HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned

Hi,
I have this printer HP Laser M1522nf.It was working fine till today.Suddenly it has started giveng this error
"HP Laser M1522NF the USB device attached to this computer is not recognised and has Malfunctioned"
This error is not on printer but on my computer when I connect the printer USB cable.I have 3 laptops all have winxp installed on them.I have tried connecting the printer with all laptops and they all give the same error with reference to connecting usb printer cable and Malfunctioning.
Appreciate your gracious advice and guidance in this regard,
Many thanks

Is this at an office and you are logged in not as an administrator?
If that's not the case, then the message maybe true, that it did malfunction, and need to be serviced. (assuming you already tried power cycle the printer, making sure doors/trays are all properly put in.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

USB Device Not Recognized - USB device attached has malfunctioned & Windows does not recognize it

I have an HP Pavilion dv4 Notebook running Windows 7 Home Premium and the USB ports worked fine for an HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB Device Not Recognized" and also indicated that the device attached to the computer has malfunctioned. This prompted me to buy a new Canon digital camera. Well, a new camera did not fix the problem. Now, anything connected to either of the 2 USB ports will not be recognized by my laptop. Help! I'm at a loss to figure this out. I've tried the suggested Microsoft help below:
Suggestion 1: For the issue with USB devices, uninstall and re-install all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition.
The USB controllers represent the USB ports in Device Manager.
a. Click Start, type device manager in the Start search box and hit Enter.
b. Expand Universal Serial Bus controllers.
Note: You might have to scroll down the list to find this item.
c. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.
d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.
e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.
f. Check the USB device to see whether it is working.
This did not correct the problem. Then from device manager, I tried updating drivers on all the USB controllers and root hubs. While some may have received downloaded software updates, it still did not correct the USB device not recognized problem after restarting the computer. I'm hoping someone knows of the fix to this situation and can pass it along to me. Thanks for reading and posting any help.
This question was solved.
View Solution.

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

My computer will not recognize my ipod touch anymore. When I plug it in it says the USB device attached to this computer has malfunctioned and windows doesn not recognize it.

My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

Identifying attached USB devices

Similar Messages

Maybe you are looking for