Identifying if the database import was done successfully
Hi all,
Recently my DB administrator restored the database from a backup drive. Can you tell me if there is anyway to know from the SBO client when the last transaction or login was performed in the system. I am hoping with this information, I can make a 1st level confirmation that the restore occured from the correct backup.
Thanks,
Manoj.
Hi Manoj,
You may check either OJDT or ADOC table for the last record. It is usually the latest record before backup.
Thanks,
Gordon
Similar Messages
-
i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help
Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.
-
If the Database Hardisk was Crashed...
Hi..
I have one question that is ..If the Database hardisk was crashed, in this case how can i restore and recover the database......Hi,
You need to perform the disaster recovery.
You need take the backup of whole database manually or using rman
Let me explain when my whole db was gone and only backup was left
1) start the rman in nomount state( it will start by using default INIT.ora file)
2) Once done restore the rman spfile from rman backup
3) now start the db using restored spfile
4) restore the controlfile from backup
5) catalog the backupset
6) now you can use setnew name or db_file_name_convert,log_file_name_convert parameter
7) restore the whole database and recover it
happy restore :)
Kind Regards,
Rakesh jayappa -
I have recieved a locked phone from US. At& T confirmed tht the same could be unlocked and had suggested the procedure of 'back up and restotre to unlock the phone, which was done. After this when I removed the old simcard, the iphone cannot be activated
When you connected to iTunes and restored, did you get the
'Congratulations. Your iPhone is now unlocked' message?
If not, first try again. Follow the procedure in the email
AT&T sent you exactly - do not skip steps. If still no success,
contact AT&T as the problem is on their end.
Do you have a sim in the iPhone when trying to activate it?
You must put a sim into the iPhone for activation to compllete. -
I just updated to iOS 7.0.4 and I had to delete most of my photos to have enough space to perform the update. I did an iCloud back up last night that has all deleted photos. If I restore the most recent back up will I lose any new messages that I have sent or received since the back up was done last night?
Yes. Restoring to a backup takes the phone back to the date and time of the backup and anything done since that time is lost, with the exception of your update to iOS.
-
The database migration report don't show all the erros at creation time
Hello experts,
I'm using omwb to migrate a sql server database, i realize that at creation of oracle model there are few stored procedures that was not created.. those object doesn't appear in the Errors_and_Warnings_report.htm but in the logs. My question is why the report don't show those objects?
Another question: how to list the objects that the tool was unable to create in the oracle model?
best regardsHHerrera,
Are the stored procedures that were not created, but were not in the in the Errors_and_Warnings report, visible in oracle, i.e. is the text available in Oracle? If so, it would be easy to compile all the objects in your schema and do a select to see which stored procedures were invalid.
Regards,
Turloch -
I also have the app for my iphone which is still synced with my account and has my bookmarks there but I don't know how to get them onto firefox. The account i used to sync my bookmarks on my iphone app was under the email address [email protected] as is this one. I tried logging in with the first account but no pw I tried worked. I tried to get a new pw from the site but I was never sent an email to reset it so I created a new account under the same email address.
I got my contacts back by doing another restore! Relief..
But only a very few odd apps are showing up on the 3GS
Any suggestions? -
The phone was locked to a network which is why they jail broke it.. Not sure why as it's easier and cheaper to have the network unlock it!!! Which is what I would like to do. At the moment we can't upgrade any software... I'd like to honestly and respectfully use this phone...
euh no, that does not sound right. If you restore from back-up it will not fly.
a. You need to turn on iCloud if not done yet so it sync your contacts, calendar data, etc.
b. You need to back up in case something happens
c. Then restore
d. Then go on the app store, purchased, and re-download the app that you want
e. Then go on settings/iCloud and turn iCloud on with your Apple ID to put back your contacts, calendar data, etc.
That should be enough. -
To start off, I absolutely do not understand iTunes. I feel that with every new "upgrade" it becomes more difficult to use.
We have 3 apple ID's for our home to make syncing easier and not have complications with devices. I have a window's computer with itunes which is "authorized computer" for all 3 apple ID's in family (mom, dad, child). We purchased a DVD with digital copy, installed and redeemed the code for the digital copy. However, it would not allow me to "redeem" on my child's apple ID. therefore, the digital copy went into my apple id. Now I can not sync the movie to my child's ipad/apple id. How can this be done? Please help! I know it can't be that hard, or is Apple just making iTunes worse and worse.The movie is from iTunes. You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case.
-
TF53001: The database operation was canceled by an administrator.
What am I doing wrong? I get this message since today when i try to check in / get latest on my TFS 2013/ VS2013 Environment. I can't find any helpful thread about this message on the Internet.
Maybe someone here can help me?
thanks
MichaelHi Michael,
Thanks for your post.
You can connect to your TFS Server successfully, only check-in/get latest received this error?
Please ensure your TFS’s SQL Server working fine.
And try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself), then restart your TFS 2013 Server:
Clean the Cache folder on Server machine. The folder path is:
C:\ProgramData\Microsoft\Team Foundation\Web Access\Cache_v12.0.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Re: Configure EVO:RAIL .. The Validation process was not successful...
I had a look at your log file - and i'm seeing loads of
05-Mar 18:14:25 WARN ConfigurationServiceImpl:152 - Configuration does not validate (CURSORY): ConfigurationValidation{normalValidationFieldErrors={passwords.vcPassword=올바른 암호가 아닙니다., passwords.esxiPassword=올바른 암호가 아닙니다., vendor.ovfs=EVO:RAIL에서 필요한 QEP 제공 솔루션을 찾을 수 없습니다. ESXi 호스트와 통신할 수 없기 때문일 수 있습니다.}, thoroughValidationFieldErrors={}}.
You need a password that meets SSO requirements for complexity...
These are:
–8 and 20 characters, one uppercase, one lowercase, and one special character. It cannot have any character repeated 3 times in a row)
So VMware1! would be a valid password
Not sure if this is your problem but it stood out immediately...
Regards
MikeThe password is not a problem. ㅠㅠ
What is the vCenter Server on by JSON file ESXi Server is a method that is configured?
Architecture consisting of a ESXi Server by vCenter JSON File...?
what are links in the vCenter Server and ESXi Server?
In the log.
Finding VC UUID ...
06-Mar 18:04:58 INFO HostDiscoveryServiceImpl: 115 - Found: 564d1ed5-70ff-a538-efee-0293e3093ea4
06-Mar 18:04:58 INFO HostDiscoveryServiceImpl: 118 - Finding primary host to extract asset tag ...
06-Mar 18:04:58 WARN HostDiscoveryServiceImpl: 121 - No primary host found!
06-Mar 18:04:58 WARN InitialHostDiscoveryJob: 71 - No initial hosts found.
Why "No primary host found!" ?? ㅠㅠ -
Upgraded the Database from 10.2.0.4 to 11.2.0.2 including statistics
Hi,
Recently I have upgraded Few Servers from 10.2.0.4 to 11.2.0.2 on Sun Solaris 64Bit X86.
BANNER
Oracle Database 11g Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionBefore the Upgrade We generated the stats at system level and Schema level and exported the stats into Table.
Database Upgrade was done successfully
Upgraded the System stats
Upgraded the Stats table and imported back to Schema's
Tested with Queries and they were OK
But some of the Queries which have DB Links started taking Hanging and seen wait events
WAIT #18446741324892168800: nam='asynch descriptor resize' ela= 3 outstanding #aio=0 current aio limit=4294967295 new aio limit=261 obj#=-1 tim=581083891935
WAIT #18446741324892168800: nam='SQL*Net message to dblink' ela= 4 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=581084016896
WAIT #18446741324892168800: nam='SQL*Net more data from dblink' ela= 22 driver id=1413697536 #bytes=4 p3=0 obj#=-1 tim=581084030942 So I raised call with Oracle and gave me patch for fix "asynch descriptor resize" but the problem still exist with below wait events
WAIT #18446741324892168800: nam='SQL*Net message to dblink' ela= 4 driver id=1413697536 #bytes=1 p3=0 obj#=-1 tim=581084016896
WAIT #18446741324892168800: nam='SQL*Net more data from dblink' ela= 22 driver id=1413697536 #bytes=4 p3=0 obj#=-1 tim=581084030942 Normally in the 10g this Query used to come out under second
So I used the Hint 10.2.0.4 in the Query and the output came under second.
So I updated the optimizer feature parameter to 10.2.0.4 and then Queries started working fine.
In the Test Environment I was able to reproduce the same problem.
Test Case
Took the physical copy for the Upgraded DB
Run the same Query with 11.2.0.2 optimizer and saw the same problem
Deleted the Schema level stats
Generated the new stats
Executed the same Query(Out came under second)
Oracle Support Still working on this issue
As any one has faced this issue.
Regards
NMYou can do this also
1. Export 3 schemas with grants=y rows=N and import the data schema structure with grants
2.Check the log file for missing roles and create those roles using from dba_role_privs..etc
3. Import the data ignore=y option
Hope this helps
http://www.oracleracexpert.com
Click here to learn [Oracle data pump export/import with examples.|http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html]
Click here to learn [Data Pump Export modes and interfaces|http://www.oracleracexpert.com/2009/08/data-pump-export-modes-and-interfaces.html] -
I am still not able to recovery Aperture and get it to open the library. I really need some help here on what is casuing the issue.
I never got a warning on the library or anything when I shut it down. One day later it won't open. I sent some pictures out via email and looked through one library. There was a warning panel that came up with a bunch of errors from the console APP. Nothing specific.Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
HT1766 how do i check if the backup was done
How do I check to see if the back up was done correctly on itunes?
Hello,
Most update installs of the nature you describe download and install Flash Player directly. Sometimes (at least 4 per year), instead of downloading and installing Flash Player directly, the user is taken to the adobe.com site to download the player.
Maria -
Actually in my project The middle tier was written using RMI.The Database i
Actually in my project The middle tier was written using RMI.The Database interaction was defined in the middle
tier itself.My problem is , the queries we post to the database should interact with XML Database which in turn should
interact with the actual Relational Database from which the XML Database was built.
Thanks in AdvanceLeave the phone alone and let it cool down.
Maybe you are looking for
-
since installing lion, i can lo longer go to "my imac" and find external hard drives and other devices i plug into a usb hub. my ipad and iphone don't automatically open itunes only iphoto. my external hardrive used to also load automatically, now it
-
Calling the same API twice in one procedure
Has anyone every had any issue in caling an API twice in the one procedure? I have one file that has two element entries and up to three salary components. Has anyone ever had an issue doing this? Edited by: 859919 on May 21, 2011 9:26 AM
-
I can open RAW files from my camera in photoshop cs5, but they dont save properly after editing
I can open RAW files from my camera in photoshop, but then after I have edited, i save as .raw, and open up the newly saved file and it just comes up as a grey messed up picture. What am I doing wrong?
-
Send files as attachment with BCS-methods
Hi, I want to load file(s) from application server and send it as attachment per mail. In 4.6c I had a program with fm 'SO_DOCUMENT_SEND_API1' that worked fine. But not any longer in 7.01. So i tried it with the new method of BCS* But it worked not f
-
Dear friends, is there any way tht i can pass the session variables set in a jsp file to a php file. Is there any way to do this apart from setting cookies? plz help!! bussa