Identifying naming conflicts when consolidating .flas -
F8as2
Greetings all,
Background:
Over the past years I have created many different .fla's of aircraft panels( ie. hydraulic panel, electrical panel, pressurization panel, etc.) Each .fla has only one panel in it. Each panel is a movieclip and made up of movieclips, graphics, etc. It has it's own code built in and the idea was to be able to copy the panel from the original .fla to a new .fla, that contained other panels, and together would become part of a training program for the company. No I wasn't smart enough to uniquely name each asset(switch, guage, light, etc.). I did avoid the default names like symbol1, symbol2, etc.
Now I need to take each of the panels from the individual .fla's and put them into one larger .fla to act as a single library for all the panels. This single .fla will become the master Library that I will link all future .fla's to. As you would guess I get the "One or more library items already exist in the document:" message when I try to copy and paste a panel(movieclip) into the new .fla.
Question:
Is there an easy way to identify specifically which items are in conflict without having to do a direct comparison between each of the libraries???
Thanks for the help,
Logeye
F8as2
Why don't you use a MovieClipLoader? Then you could load all of your panels into your main project. This would require you to have multiple FLA's, this could possibly be less work & make your project more modular.
this.createEmptyMovieClip("mcPanelWindow",this.getNextHighestDepth());
var CurrentWindowListener:Object = new Object();
CurrentWindowListener.onLoadComplete = function(target_mc:MovieClip){
//fully loaded (not started)
//move the panel movieclip in this frame
CurrentWindowListener.onLoadInit = function(){
//action taken when the FLA starts
var CurrWindow_mcl:MovieClipLoader = new MovieClipLoader();
CurrWindow_mcl.addListener(CurrentWindowListener);
CurrWindow_mcl.loadClip( "panel.swf", mcPanelWindow);
Similar Messages
-
Error Dynamic type conflict when assigning references in EHP4
Hi Experts,
We are facing problem while customizing application wizard in EHP4.
Based on our requirement, we need to create one more tab named "Notes" to add instructions for applicants while applying for Job. It contains only instruction. To achieve this, we have done below set up.
1. We have created new WD component (WD window), OTR Alias
2. Created one more additional steps in T77RCF_RM_STEP called "Notes" and maintained step 1 information
3. In table T77RCF_RM_SEQ, under Application wizard (employee), we have added notes in sequence 1.
Now our new tab "Notes" is reflecting in application wizard. But while cliking on send application, we are getting error "The following error text was processed in the system GEG : Dynamic type conflict when assigning references".
Error Details:-
u2022 The following error text was processed in the system GEG : Dynamic type conflict when assigning references
u2022 The error occurred on the application server sapgeg_GEG_59 and in the work process 0 .
u2022 The termination type was: RABAX_STATE
u2022 The ABAP call stack was:
Can anybody guide what we are doing wrong?
It would be great help.
Regards,
purnimaHi Rajasekhar,
Facing the same issue, can you please let me know how you solved the above issue.
Best Regards,
Laxman -
when i tried to add a web service to creator i get naming conflicts error. using one default targetnamespace(package) cause this. at netbeans 5.5 after adding wsdl i change build-impl.xml. i remove package propery from wsimport tag. that causes to generate classes to the packages that defined at shemas. how can i implement this to Creator. there is no parameter for using webservices.
<wsimport sourcedestdir="${build.generated.dir}/wsimport/client" destdir="${build.classes.dir}" wsdl="${basedir}/xml-resources/web-service-references/Simple/wsdl/Simple.wsdl" catalog="catalog.xml"/>It would be usefull to know how we can find out why Sun Java Studio Creator is not able to add some Web Services. I seems that JSC has problems to compute the WSDL File of these services.
The Error Messages of your Tool are not very helpfull, e. g. :
"Start http://soap.search.msn.com/webservices.asmx?wsdl 09/22/2006 09:17:02:�Parsing WSDL. Please wait ..WSDL - http://soap.search.msn.com/webservices.asmx?wsdl 09/22/2006 09:17:04:�Parsing WSDL results: Error:Folgende Namenskonflikte sind aufgetreten: SearchResponse_Type 09/22/2006 09:17:04:�Parsing WSDL. Please wait ..WSDL - http://soap.search.msn.com/webservices.asmx?wsdl 09/22/2006 09:17:05:�Parsing WSDL results: Error:Folgende Namenskonflikte sind aufgetreten: SearchResponse_Type".
Thank you -
How to identify a type of consolidation in a system?
Hi,
I need to understand how to identify the type of consolidation we are doingion the system.
Example like Step consolidation, Simultaneous consolidation or other method.
This will be helpfull for me in doing my currest support issues.
Thanks in advance,
Richard..Not sure to understand your question.
What is the precise context of your issue ? Is it a problem of SEM-BCS configuration or a general problem on how consolidation works ? -
Type conflict when calling a function module (field length)
Dear All,
I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
node_mat_input TYPE REF TO if_wd_context_node,
node_mat_output TYPE REF TO if_wd_context_node,
material TYPE BAPIMATDET-MATERIAL,
itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
EXPORTING
material = material
PLANT = plant
VALUATIONAREA =
VALUATIONTYPE =
MATERIAL_EVG =
IMPORTING
MATERIAL_GENERAL_DATA = itab
RETURN =
MATERIALPLANTDATA =
MATERIALVALUATIONDATA =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.Hi Amit,
I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
node_bapi_material_get_de TYPE REF TO if_wd_context_node,
node_exporting TYPE REF TO if_wd_context_node,
node_material_general_dat TYPE REF TO if_wd_context_node,
node_importing TYPE REF TO if_wd_context_node,
lri_element TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
stru_c_material_general_dat TYPE if_componentcontroller=>element_material_general_dat.
DATA:
attr_material TYPE bapimatdet-material,
attr_plant TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute( EXPORTING name = `MATERIAL`
IMPORTING value = attr_material ).
node_importing->get_attribute( EXPORTING name = `PLANT`
IMPORTING value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
EXPORTING
material = attr_material
plant = attr_plant
" valuationarea = wd_This->Valuationarea
" valuationtype = wd_This->Valuationtype
" material_Evg = wd_This->Material_Evg
IMPORTING
material_general_data = stru_c_material_general_dat
" return = wd_This->Return
" materialplantdata = wd_This->Materialplantdata
" materialvaluationdata = wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM -
ERROR: -Type conflict when calling a function module
hi to all,
when iam executing the program in browser Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
NODE_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_IP_SELECTION TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_IP_SELECTION TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
IMPORTING
STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
DATA:
NODE_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_NODE,
ELEM_PLANN_NODE TYPE REF TO IF_WD_CONTEXT_ELEMENT,
STRU_PLANN_NODE TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
LOOP AT ITAB INTO WA.
MOVE-CORRESPONDING WA TO WA1.
APPEND WA1 TO ITAB1.
ENDLOOP.
navigate from <CONTEXT> to <PLANN_NODE> via lead selection
NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
CALL METHOD NODE_PLANN_NODE->BIND_TABLE
EXPORTING
NEW_ITEMS = ITAB1
SET_INITIAL_ELEMENTS = ABAP_TRUE
INDEX =
ENDMETHOD.CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh -
Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
PalaniHi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM -
i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*" VALUE(POHD) TYPE ZPOHD OPTIONAL
*" VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*" RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
ls_pohdx TYPE bapimepoheaderx,
lt_poit TYPE TABLE OF bapimepoitem,
lt_poitx TYPE TABLE OF bapimepoitemx,
ls_poit TYPE bapimepoitem,
ls_poitx TYPE bapimepoitemx.
MOVE-CORRESPONDING pohd to ls_pohd.
MOVE-CORRESPONDING poitem to ls_poit.
ls_pohdx-comp_code = 'x'.
ls_pohdx-doc_type = 'x'.
ls_pohdx-vendor = 'x'.
ls_pohdx-purch_org = 'x'.
ls_pohdx-pur_group = 'x'.
ls_poit-po_item = '00010'.
APPEND ls_poit to lt_poit.
ls_poitx-po_item = '00010'.
ls_poitx-po_itemx = 'x'.
ls_poitx-material = 'x'.
ls_poitx-plant = 'x'.
ls_poitx-quantity = 'x'.
APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
POHEADER = ls_pohd
POHEADERX = ls_pohdx
* POADDRVENDOR =
* TESTRUN =
* MEMORY_UNCOMPLETE =
* MEMORY_COMPLETE =
* POEXPIMPHEADER =
* POEXPIMPHEADERX =
* VERSIONS =
* NO_MESSAGING =
* NO_MESSAGE_REQ =
* NO_AUTHORITY =
* NO_PRICE_FROM_PO =
* PARK_COMPLETE =
* PARK_UNCOMPLETE =
* IMPORTING
* EXPPURCHASEORDER =
* EXPHEADER =
* EXPPOEXPIMPHEADER =
TABLES
RETURN = return
POITEM = lt_poit
POITEMX = lt_poitx
* POADDRDELIVERY =
* POSCHEDULE =
* POSCHEDULEX =
* POACCOUNT =
* POACCOUNTPROFITSEGMENT =
* POACCOUNTX =
* POCONDHEADER =
* POCONDHEADERX =
* POCOND =
* POCONDX =
* POLIMITS =
* POCONTRACTLIMITS =
* POSERVICES =
* POSRVACCESSVALUES =
* POSERVICESTEXT =
* EXTENSIONIN =
* EXTENSIONOUT =
* POEXPIMPITEM =
* POEXPIMPITEMX =
* POTEXTHEADER =
* POTEXTITEM =
* ALLVERSIONS =
* POPARTNER =
* POCOMPONENTS =
* POCOMPONENTSX =
* POSHIPPING =
* POSHIPPINGX =
* POSHIPPINGEXP =
* SERIALNUMBER =
* SERIALNUMBERX =
* INVPLANHEADER =
* INVPLANHEADERX =
* INVPLANITEM =
* INVPLANITEMX =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". -
Hello,
for our WebService (SOAP) to Idoc scenario I generated the wsdl file.
The message part of the wsdl looks like this:
<wsdl:message name="MT_WebService_Return">
<wsdl:documentation/>
<wsdl:part name="MT_WebService_Return" element="p1:MT_WebService_Return"/>
</wsdl:message>
I sent the wsdl to the dev. team of the sender system. They tried to import the wsdl into their application (BizTalk). But they get an error: Naming conflict. They say attribute "name" of wsdl:message and wsdl:part have to be unique and different.
How do I accomplish that?
Thank
ElkoHi
Can u tell me clearly in detail.
Actually any WSDL parameters will be linked based on the Namespace details. But I dont see any namespace details in ur WSDL.
CASE1:-
My question is after u create a message type and exporting Service definition as WEBSERVICE definetely it should contains namespace. Cant they do not able to import that WSDL and causing our XI naming standard issue compatibllity?
CASE2:-
Suppose if they are chanigng the namespace will you be able to receive any XML message into MONI?
IF YES Check and write a Small Javamapping to convert the namespace with REPLACE ALL function and pass that output XML of Javamapping to your graphical mapping
Regards
AMar Srinivas Eli
Regards:- -
Class conflict when programmatically editing graphs with property node
I am trying to programmatically move the cursors on a graph. I want the cursor to look the same on 2 different graphs so I made a subVI. The code works correctly when I have seperate property nodes, but when I try to use the subVI, I get a class conflict -
"You have connected a refnum of one type to a refnum of another type and both types are members of some class hierarchy, but there is neither a simple up cast nor type cast between the two classes."
I am not sure how to fix this. The graph that works is of a waveform, and the graph that doesn't is the output of the FFT Power Spectrum VI. Is the problem that the inputs are different? Or is there some kind of resource conflict when using property nodes in subVIs?A shot in the dark here. But maybe if you make the subVI's input reference of type GraphChart it would work.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
TRFC type conflict when calling the function module
Hi,
When I schedule, it is stucking up with TRFC and giving error message in SM58 as" TRFC type conflict when calling the function module" .
even if I execute the trfc LUWs ,load is not successful.
could you please any body suggest for this error.
Thanks
RHi Guys,
could any suggest why this is happening.
TRFC is stuck up and giving error message.
Thanks
Ram -
DTP error: Type conflict when calling FM - after transport to Prd
Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
rameshHi
Take a look at note 1130907.
Regards,
Chandu. -
ERM "Unhandled error; type conflict" when clicking Maintain in PFCG button.
I am testing my installation of GRC and when creating a role in ERM with the role designer I click the "Maintain in PFCG" and am receiving an error:
Unhandled error; Type conflict when calling a function module (field length).
I have been doing some searching but have been unable to find a solution for this. I have implemented the items found in SAP Note 1291501 regarding security.
Does anyone have suggestions on what the solution of this problem is or what I can do to troubleshoot this issue more?Hi Michael,
Can you please share your other details like: What is the GRC AC version you are trying to test and the patch level of ERM and RAR. Try to check the System logs in the Configuration section. Check st22 suggested by Julius and also sm21 in the backend system for system logs . I hope you'll get some hint out of that.
Regards,
Gurugobinda -
Dump while testing Function- Dynamic type conflict when assigning reference
Hi Gurus,
I have the following checked and activated-
- Function with 1 Ruleset
- The Ruleset containing couple of DBlookup expressions
- Value range
- Decision Table
- Decision tree,
- Procedure call
After I give test data while Simulating the function, I get this dump-
Short text
Dynamic type conflict when assigning references
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FDT_DB_LOOKUP==============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Have I missed something? We are on SAPKA70207.Hi Carsten,
I couldn't find an OSS note featuring-
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
"CL_FDT_DB_LOOKUP==============CP" or "CL_FDT_DB_LOOKUP==============CM01K"
"BUILD_WHERE_CLAUSE_LIMIT"
Raised OSS note. -
RFx Q&A dump SRM 7- Dynamic type conflict when assigning references Q&A
Hello,
We are on SRM 7.0 SP05. When adding a question via the Q&A 'chat' functionality on a published RFx the EP shows the following error: 'Dynamic type conflict when assigning references Q&A'.
Could somebody test if this issue is also occuring on their system?
Anybody has a clue what's causing this?
Kind regards,
TimHello Jay,
Loggings show the following:
15:18:49 DIA 000 100 NLPURCOR AB 0 Run-time error "MOVE_CAST_ERROR" occurred
15:18:50 DIA 000 100 NLPURCOR AB 1 > Short dump "100324 151849 dmzsv719 b_SRM_00 " generated
Maybe you are looking for
-
Replace NULL values from PIVOT query
Hi, I'm querying a table for sales, for some values, when now columns, the finish with a null value. How can I handle these values as 0 (zeros). WITH PIVOT_DATA AS ( SELECT S.ZONE_CODE,Z.ZONE_NAME,S.YEAR,S.PERIOD,S.SALES FROM STAT_TABLE_SALES VTA JOI
-
How do i change my icloud apple id on my iphone?
I can't change my apple id password for my apple id! It says it sent me a message but I never get it. I need to change the password but I can't. My iphone keeps assking me ALL DAY to enter a password and wearing down my battery! HELP
-
HT4059 On recent purchases I cannot read the first several chapters due to an error message.
I downloaded several books from the iBooks store - when opening them I see an error message that says "This page contains the following errors: error on line 1 at column 1: Document is empty error on line 1 at column 1: encoding error below is a ren
-
While clearing through F-54 system throws error No downpayment exist
While clearing through F-54 system throws error : No downpayment exist. But I have checked in the Downpayment account, A/P account and Customer Line item and the entry exists. Customization for Downpayment made also correct. All the fields are correc
-
Folders in /Library/Webserver/Sites/ not accessable with chmod by ftp
When i create a new folder within a website and want to give it write permission with chmod 777 by ftp client it changes back to the default setting. So i always have to open server admin > filesharing to accomplish writable folder access. Is there a