Identifying off-peak hour in apps environment

Hi,
I would like to identify the off-peak hour in system.
How can I do it?
Can this be done by obtaining the load on the system at certain point of time?
If so, how can I get the load details at a point of time?
Not sure if this is the right forum category to raise the question, if not please do point me to the right one.
Thanks.

Hi;
For 9i(also for 10g but u can prefer ASH,AWR for use it) you can use statspack report
Please check below notes:
How to Identify Resource Intensive SQL for Tuning Doc ID:232443.1
FAQ- Statspack Complete Reference Doc ID:94224.1
Installing and Configuring StatsPack Package [ID 149113.1]
FAQ- Statspack Complete Reference [ID 94224.1]
Creating a StatsPack performance report [ID 149124.1]
How To Understand AWR Report / Statspack Report [ID 842884.1]
What is StatsPack and where are the READMEs? [ID 149115.1]
Systemwide Tuning using STATSPACK Reports [ID 228913.1]
Oracle Applications and StatsPack [ID 153507.1]
Oracle9i Database Performance Tuning Guide and Reference-Using statspack
http://www.oracle-base.com/articles/8i/Statspack8i.php
Also i suggest check:
How to Identify Resource Intensive SQL for Tuning [ID:232443.1 ]
TROUBLESHOOTING: Possible Causes of Poor SQL Performance [ID:33089.1]
Regard
Helios

Similar Messages

  • Heavy Downloading during off peak hours?

    Hi there,
    I have been doing a lot of reading around the various limits 100GB and 300GB and how they have now been removed by BT, but that everything is now unlimited subject to FUP.
    However, I can't seem to find the answer to my question.
    I would appreciate anyone who is currently in the same position to give me some info.
    If I am a heavy user/downloader, who only mainly use Infinity to download during off-peak hours (usually overnight) will I get throttled during those times (overnight - say for example midnight to 8am)?
    This will be either P2P/Torrents or Usenet (or both), could be maybe 1TB a month or maybe more.
    I am not concerned about normal daytime usage which will probably just be for browsing/emails, not overly heavy usage I don't think.
    Thanks.

    ufo wrote:
    Hi there,
    I have been doing a lot of reading around the various limits 100GB and 300GB and how they have now been removed by BT, but that everything is now unlimited subject to FUP.
    However, I can't seem to find the answer to my question.
    I would appreciate anyone who is currently in the same position to give me some info.
    If I am a heavy user/downloader, who only mainly use Infinity to download during off-peak hours (usually overnight) will I get throttled during those times (overnight - say for example midnight to 8am)?
    This will be either P2P/Torrents or Usenet (or both), could be maybe 1TB a month or maybe more.
    I am not concerned about normal daytime usage which will probably just be for browsing/emails, not overly heavy usage I don't think.
    Thanks.
    Wow!!! 1TB a month , do you get much sleep
    Usenet is not throttled but P2P is throttled during peak hours. As you are talking after midnight, the throttling should not effect you, but there have been posts saying that the throttling has gone on longer.
    Here is a link to the Broadband usage Policy
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • Can I switch back to Free during off-peak hours and switch to Basic once traffic is up?

    Hello,
    I have a website hosted on Azure. But there are times that it has no traffic during off-peak hours. However, since it has a lot of images in it, during peak hours I can consume the 165MB/Day limit of the free tier in just a few hundred requests. Can I switch
    from Free to Basic during peak hours with unlimited data and back to Free during off peak to save costs? Are we allowed to switch between different pricing tiers as much as we want?
    Thanks

    hi sir,
    Yes, you can switch your website mode by you wanted. However when you switch mode, your website will be temporary shift. I guess it may affect your website performance and runtime. And currently, you only can switch mode manually. If your subscription
    is free trial, you may need convert it to Pay-As-You-Go.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is there a way to schedule downloads for off-peak hours? (Hughesnet user)

    Our ISP allows a limited download capacity of 15GB per month, but allows another 15GB between the hours of 2AM-8AM. I would like to be able to download the programs during this time. If it were at home, I would wake up and start the downloads, but being at my office at work this is not possible. I have a download manager which can schedule other downloads for my computer, but downloading through the Creative Cloud Installer app eliminates this possibility. Are direct download links available? Or another solution?

    ‘DDL’ Articles at ProDesignTools

  • Exchange E-Mail not Respecting "Off-Peak" Settings on Phone Start-Up

    I've got my work exchange e-mail set-up on my phone to have a quiet time before 8am, after 6pm and al;l day at the weekend when sync is set to "Manual".
    This works fine 99% of the time -except if my phone has been switched off.  When the phone is switched back on, it ALWAYS seems to do a mail sync on this account, regardless of whether it is a "Peak" or "Off-peak" time.
    This is using the Sony-installed "Email" app v 6.1 on a Z2 with 17.1.2.A.0.314 firmware.
    Anyone else seeing this?  Any fixes?
    Thanks.

    Confused as to which setting should be on "Push" ???
    I want e-mail checked every hour, between 8am and 6pm Monday to Friday.
    I want e-mail not checked at all (except manually) all day at the weekend, and before 8am and after 6pm during the week.
    My current settings are in the attached screen shot.  What should they be to get the schedule listed above to work?
    Thanks!

  • Cant get into MfE when phones set to "off peak" ti...

    On the weekend (off-peak time) I couldn’t synchronies (kept telling me to set up an Exchange profile), didnt receive any emails (sent a few to the company account which is set up on the phone to test it but no luck) and couldnt get into the MfE settings (menu -> mfe and from there I couldnt do anything, hit options and it showed the usual menu but when I clicked on Open nothing happened and even the left-right moving locked up, all I could do is to quit to the "desktop") The phone was working fine apart from this (and been working fine since this year april, even upgraded to the latest firmware in the same month) and had no problems with it till the weekend. Tried rebooting (switch off and on) : no luck.Our Exchange server was fine ok all weekend, managed to log into my account, no error logs that would indicate it was the servers fault. Other people (with the same phone, same firmware, same settings) had no problems accessing their emails on the weekend. This morning as soon as it hit the scheduled peak time it started working fine, emails started coming in. In peak time it syncs every 30 mins and in off-peak it syncs every 6 hours.  Any suggestions/solutions would be highly appreciated since I cant be without phone and emails the coming weekend. 

    My girlfriend was having a similar problem with her N95 phone. I'd spotted a couple of posts like this one, but no solution. Here's how I fixed it...
    Used nokia pc suite to back everything up off the phone.
    We tried resetting the phone to factory settings using both the option within the phone, and the reset code, but still couldn't access messages.
    We then entered *#7370# to reformat the phone, and messages were than accessible.
    As we thought might happen, when we restored the full backup in nokia pc suite, the messages couldn't be accessed.
    We reformatted the phone a second time, and restored the backup using nokia pc suite again but this time we didn't restore the settings. Messaging was accessible again, the old messages, contacts etc were all there. All that needed setting up again were things like selected ring tones.
    Hope that helps.

  • Poor speed in peak hours - losing will to live - o...

    Hi BT,
    I am almost at the point of begging someone to help me here, thank you in advance for your time and insight. It was with a heavy heart that I departed from BE There after Sky's takeover, and invested a little faith in BT. I started a contract for BT Total Broadband 3, and received an immaculate service for the first ten days or so of my contract.
    Then, quite suddenly, I started receiving dramatic drop-outs in peak hours only. As I type this, BT Speedtest reports downstream of 18.95mbps (as quoted) but by tonight, it will be down to around 0.05-0.1. This is with both a wireless and wired test, and has endured, every day, for around a month now. I work from home, and it's losing me money every night; if I restart the router then it sometimes picks up by a few mbps, but within minutes has returned to where it was. 
    I have a query open with BT Technical help department who, unlike general customer services, have been very responsive and helpful! I have been sending them regular diagnostics, however no-one can yet seem to identify what the problem is. They first suggested resetting to factory settings - no change. I then ran the full diagnostics with the aid of a BT worker's call last Friday, including TAP3 and everything that comes after, and the verdict was that my Broadband is 'performing extremely poorly and that a fault would be raised'.
    I found this reassuring; however another employee called me this morning to tell me BT had spoken to the exchange, and ascertained that supposedly everything was 'fine with my line'. She suggested I try testing the service using the master socket in the white BT box, however there is no response when I try this - I cannot connect to Broadband, or get a dial tone. I am keen to know how much of an issue this could be, and whether this represents a problem on 'my' side or BT's? I have tried changing filter - same result. I have also called 17070 and there appears to be absolutely zero noise on my line. 
    I am at my wits' end, and constantly curse the decision I made to throw away a connection that hadn't misfired once in three years for one that is effectively unusable in the evenings/weekends. I have also recently finished a full time study course, money is short and I am slowly suspecting that I am going to be strong-armed into paying exorbitant engineers' fees to look at a connection that, with my previous ISP, functioned perfectly. This is desperately depressing; please, please could someone try and help?
     This is my current ADSL status at 13.30:
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:30:55
    Downstream:
    20.9 Mbps
    Upstream:
    1.133 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    3.0 dB / 6.0 dB
    Line attenuation (Down/Up):
    14.5 dB / 7.5 dB
    Output power (Down/Up):
    19.9 dBm / 11.5 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    63 / 32

    Hi there, thanks for your response
    Connection time is short due to my testing via the test socket about half an hour before posting on here. As in the above post, there is no response from the test socket; the master socket works fine (apart from the obvious slow-down issues in peak hours). The master socket is the only one in the house, and I've used it without issue for years before switching over to BT. 
    These are the requested full stats which I've just obtained (I had to restart the router again, which will explain the short connection time again!)
    ADSL Line Status
    Connection Information
    Line state:
    Connected
    Connection time:
    0 days, 00:03:52
    Downstream:
    21.02 Mbps
    Upstream:
    1.129 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    3.0 dB / 6.6 dB
    Line attenuation (Down/Up):
    14.5 dB / 7.5 dB
    Output power (Down/Up):
    19.8 dBm / 11.0 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    1 / 0
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    0 / 7
    Error Seconds (Local/Remote):
    68 / 0
    PS - if you want me to leave it a while before posting stats, given the router has just been restarted, just let me know and I'll make this happen! 

  • Basic broadband package off-peak?

    Hello all, a relative of mine has the basic £10/month home broadband package and has asked me if i could find out if this package has an off-peak time that provides unlimited download bandwidth? If so, between which hours provide said off-peak times?
    Thank you for your time and patience.
    - CJ
    Solved!
    Go to Solution.

    No, the basic package is limited 24/7. If you want unlimited your relative would need to upgrade the broadband to an unlimited package.

  • My alarm goes off one hour early and this is a nuisance. How can I solve it

    Every morning I wake up an hour early because my iphone 3GS alarm goes off an hour early. Please tell me how to sort this out.
    Thanks

    Welcome to Apple Support Communities.
    To cause Mail to display outgoing attachments as icons instead of in-line, you can open Terminal.app and insert this command:
    defaults write com.apple.mail DisableInlineAttachmentViewing 1
    To enable in-line attachments again once disabled (so attachments again appear as documents displayed in-line, not icons):
    defaults write com.apple.mail DisableInlineAttachmentViewing 0

  • Is there a way to force my iPad to shut down? I "slid" to turn off three hours ago. The "wheel" is still spinning in the middle of the screen.

    Is there a way to force my iPad to shut down? I "slid" to turn off three hours ago. The "wheel" is still spinning in the middle of the screen.

    Yeah, hold down the top Sleep button and the Home button simultaneously.  Continue to hold until the screen goes blank and the Apple logo appears.  Ignore the red slider midway through this process, just keep holding both buttons down until the Apple logo appears -- it takes about 8-10 seconds.  That should do a soft reset and fix your problem.

  • Download error when renting a movie off the iTunes store app

    Hi, I tried to rent a movie off the iTunes store app today(I have rented before with no problems), but when it was in the processing stage it started saying Download error. Tap to retry. Now its taken up 1.3 gigs of space but it never finish processing so its not there. Very frustrating and i cant fix it.

    Apple Tech support doesn't respond here. This is a user-to-user forum.
    You can always restore your Touch to get the memory back. And as, of course, you have everything properly backed up (you do, right?), you can just reload when you're done. I don't know as there is a faster solution.
    Best of luck.

  • Slow speed during peak hours for over a year

    For over a year now my connection speed has slowed during peak hours, at first it would start around 6pm and drop to 5meg or so untill midnight at which point it would go back up to 8meg all night and morning.
    As the year has gone on it has gotten worse and worse to the point now where it starts around 2pm and plummits to 1.5-2meg and remains at that till midnight at which point it goes back to 8meg.
    I have been trying to get help with this from @BTCare on twitter for serveral months now and have gotten absolutely no where, every time i get the same old "are you on wireless or wired", "try a different router/microfilter", "try another PC", "run a diagnostic test on our speed tester" etc etc and at the end of it they go silent and then when i try and get some kind of update we are back to square one of being told to fill out my details on the website to open a NEW ticket even though i currently have 5 or 6 open tickets for the same **bleep** issue.
    So i've come to try my luck here before i throw in the towel and just get rid of the **bleep** line alltogether as it is currently a waste of money.

    AR7 DSL Modem Statistics:
    [DSL Modem Stats]
    US Connection Rate: 448 DS Connection Rate: 8128
    DS Line Attenuation: 10 DS Margin: 15
    US Line Attenuation: 5 US Margin: 23
    US Payload : 5764512 DS Payload: 33282192
    US Superframe Cnt : 87110 DS Superframe Cnt: 87110
    US Transmit Power : 0 DS Transmit Power: 0
    LOS errors: 0 SEF errors: 0
    Errored Seconds: 0 Severely Err Secs: 0
    Frame mode: 3 Max Frame mode: 0
    Trained Path: 0 US Peak Cell Rate: 1056
    Trained Mode: 3 Selected Mode: 1
    ATUC Vendor Code: 54535443 ATUC Revision: 2
    Hybrid Selected: 1 Trellis: 1
    Showtime Count: 6 DS Max Attainable Bit Rate: 10912 kbps
    BitSwap: 1 US Max Attainable Bit Rate: n/a
    Annex: AnxA psd_mask_qualifier: 0x0000
    Power Management Status: L0 DS HLINSC: 0
    US ACTPSD: -345 DS ACTPSD: -365
    Total init. errors: 1 Total init. timeouts: 0
    Showtime init. errors: 0 Showtime init. timeouts: 0
    Last showtime init. errors: 1 Last showtime init. timeouts: 0
    ATUC ghsVid: b5 00 54 53 54 43 00 00
    T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
    ATUR ghsVid: b5 00 54 53 54 43 00 00
    T1413Vid: 00 00 T1413Rev: 00 VendorRev: 00
    [Upstream (TX) Interleave path]
    CRC: 0 FEC: 0 NCD: 1
    LCD: 0 HEC: 0
    [Downstream (RX) Interleave path]
    CRC: 0 FEC: 0 NCD: 0
    LCD: 0 HEC: 0
    [Upstream (TX) Fast path]
    CRC: 0 FEC: 0 NCD: 0
    LCD: 0 HEC: 0
    [Downstream (RX) Fast path]
    CRC: 0 FEC: 0 NCD: 0
    LCD: 0 HEC: 0
    [ATM Stats]
    [Upstream/TX]
    Good Cell Cnt: 120094
    Idle Cell Cnt: 1444599
    Tx Packets Dropped Count: 0
    Tx Bad Packets Count: 1067
    [Downstream/RX)]
    Good Cell Cnt: 693379
    Idle Cell Cnt: 27694604
    Bad Hec Cell Cnt: 0
    Overflow Dropped Cell Cnt: 0
    Rx Packets Dropped Count: 0
    Rx Bad Packets Count: 0
    [SAR AAL5 Stats]
    Tx PDU's: 117946335
    Rx PDU's: 155121137
    Tx Total Bytes: 4246066378
    Rx Total Bytes: 461177898
    Tx Total Error Counts: 0
    Rx Total Error Counts: 676
    [OAM Stats]
    Near End F5 Loop Back Count: 0
    Near End F4 Loop Back Count: 0
    Far End F5 Loop Back Count: 0
    Far End F4 Loop Back Count: 0
    SAR OAM Ping Response Drop Count=0

  • OS (operating system) vs AE (app environment)

    I think it's time for Apple and Microsoft to stop calling the their system software an OS (operating system).  They need to start calling it an AE (app environment).  People associate an OS as something their hardware needs.  This was once true, but for a long time now it's been something their apps need.  That's why we quickly upgrade to the latest OS and then are disappointed when our applications are broken.  By calling it an App Envronment, people will realize they need to find out if their apps will work with it before they get it.
    Thoughts?

    Taken from the source, written by Louis himself (maybe). Cheers

  • Turn off the iTunes and App Store links

    How do you turn off the iTunes and App Store links? I need to do it show that storeagent will stop using so much of my cpu.

    Apple menu -> System Preferences -> Accounts
    Select the "My Account" account, and select Login Items.  
    Remove iTunes helper.
    When you are done troubleshooting use the Go menu to get iTunes helper back in the startup items to go to folder, and type this as the path to your folder:
    /Applications/iTunes.app/Contents/Resources
    There you'll find the iTunes Helper, which you can drag and drop back into the Login Items.

  • How to pass IN parameter as BOOLEAN for concurrent program in Apps(Environ)

    hi all
    i am using a standard package procedure,where in which i need to pass some parameters to a procedure,
    some of the parameters there are BOOLEAN type ,can anybody help me to know , How to pass IN parameter as BOOLEAN for concurrent program in Apps(Environ)

    Already answered this on the SQL forum (How to give IN parameter as BOOLEAN in a concurrent program.

Maybe you are looking for