Identifying which clips are used in browser

I am learning FCP for the first time but I am extremely familiar with editing video on a PC. My version of FCP is 6.0.6. I really want a way to see in the browser which clips I have used in a sequence. I know I could manually mark each take by using a label but that is a huge time waste with hundreds of clips in my program. Show duplicate frames is helpful in figuring out if I have used a shot before but I want to avoid having to ever even put the same shot into the time line.
If I have 100 shots and I have used 75, I want a fast way to see the other 25 shots in my browser so I don't waist time trying every shot to see if there are duplicated frames in my time line. And I don't want to have to manually change a label every time I edit in a shot for the first time.
Premier does this so much better.
Thank you.

Thank you but I know how to enable "Show Duplicate Frames." I want to avoid needing to use this in the first place.
In Premier's equivalent to the browser window we have a field labeled "used" and it's checked if we have used the clip in the time line / sequence. Then I can instantly see which clips I have pulled nothing from.
Yes I could edit my piece and use the "Show Duplicate Frames" to find out I used 30 clips twice or more in a montage. I want to avoid putting the clips into the sequence it first place so I don't waste time. I also don't want to waste time editing a clip to the time line just to find out if I have used it before with the Show Duplicate Frames setting enabled. That wasts lots of time when you have a large number of clips. I don't want to try say 50 clips in the time line to find the 1 or 2 that I haven't already used.
I want to be able to see what clips are used in any sequence from within the browser so I can quickly see what's left. This is not Show Duplicate Frames. Again I understand what that setting does and it is helpful but not what I am talking about.
Thank you,
David

Similar Messages

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

See which clips are already used in the sequence

hi there,
I am a complete newby for mac and fce
I started a project for my dive video in the Filippines.
I have like a 1000 clips in the browser.
Is there a way in fce to see which clips are already use in the sequence and which are not?
In pinacle studio they were marked with a red v

This is a way to solve your problem.
http://discussions.apple.com/thread.jspa?threadID=2283002&tstart=0

How can I tell which clips are currently used in a sequence

In the Project window there is a list of clips I have loaded, but often I lose track of which clips are currently used in the sequence. In Premiere Elements there was a green check next to clips you have used in the timeline, but I don't see any indication of which clips are currently used in the sequence/timeline I am editing.
Is there some way to sort the loaded clips so that the ones in use all appear first followed by those clips not currently being used in the timeline/sequence. Is there some indication I am missing showing me whether or not a clip I have loaded is currently being used or not?
-Roger Uzun

This isn't really a sorting mechanism, but you can see how many times a clip is used, where it's used, and then navigate to it using the following non-descript button:
You need to have a clip selected in the Project Panel to see this information, of course. Once you click the disclosure triangle, you'll see the list of sequences and the times where the clip is used; if you select one of those references, the sequence will come to the front in the Timeline panel, and the CTI will park at its in point.
Again, not a sorting means, but it might be helpful in some instances.

"You are using a browser (SAFARI 4.0.4) that is no longer supported"

I have a iMac (20-inch, Early 2009). I am currently running Yosemite OS X 10.10.2, and my Safari is the Version 8.0.4 (10600.4.10.7). My question is this, when I log into various secure accounts I get the following message "You are using a browser (SAFARI 4.0.4) that is no longer supported by its vendor. Beginning in October 2014, PenFed will no longer support this browser version. You are strongly encouraged to update your browser to ensure your data is protected while using the Internet."
Since the Lion release. all my updates have been on line through apple. Any thoughts and advice?
Thanks
<Re-Titled By Host>

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

TS2972 how can i identify which computers are authorized for i tunes

How can I identify which computers are authorized for use with I tunes?

Hi there,
You can't see a list of your authorised computers, but you can see how many are authorised and deauthorise them individually or together.
I've found you a relevent support article which explains all of this:
iTunes Store: About authorization and deauthorization
Hope this helps,
Nathan

How can i determine which devices are used at the moment?

Hi all,
I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface. I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
Thanks,
Omer
Solved!
Go to Solution.

Hi Omer,
so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to find out which BADIs are used

Hi Experts,
Is there any tcode where I can give the transaction or program name and find out which BADIs are used in that transaction.
thanks
sankar

Dear Sankar,
You can first check available BAdis and then go to SE19 to see what all have been implemented.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen.

How to determine which processes are using a module?

I want to find out which processes are using a kernel module.
However this info is shown neither with ``lsmod'' nor in
/sys/modules/<mod_name>/.
It's needed to reload certain modules which are acting buggy,
in a bash script. Right now I just keep a list of processes which
use the module and try to kill'em all, not exactly a beautiful
solution.
To work around it I compiled a kernel with
``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
trying to unload anything with this results in an unstable system.
Suggestions?

After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

Which TABLEs are used in RWB ADAPTER ENGINE ?

Hello everyone,
Runtime Work Bench -> message monitoring
we can hier select message from
Messages of component: Integration Server from Database
Which TABLEs are used to query?
Thx in advance
Best Regards
Yaning

hello Seshagiri,
do you know? in RWB--> Message Monitoring after selection i can get many columns.
for example:
End-to-End-Informationen
Engine
Status          -
> as System Error or successful
Start
Ende
Sender-Partner
Sender-Service
Sender-Interface
Empfänger-Partner
Empfänger-Service
Empfänger-Interface
which table contains this Info. column Status ?
Thank you
regards
yaning

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to identify which applicarion is using the DVD burner?

How to identify which applicarion is using the DVD burner? Ot is not allow me to burn the DVDs genetrated in the Final Cut 7

I think you'll find that the application is Final Cut Pro... the message is bug. I get a similar message when disconnecting external drives after using them with FCP (even when the project is no longer loaded.)
As I mentioned above, the accepted workflow is to export the sequence to one of your hard drives using the Export>QuickTime Movie path with Settings:Current Settings and Make Movie Self-Contained checked like this:
This gets you a high quality "master copy" which you open in Compressor for transcoding. You should use the DVD: Best Quality setting for the duration of your movie.
this gets you the high quality MPEG-2 and AC-3 files for DVD Studio Pro authoring.
If you've never used DVD Studio Pro before, you can use iDVD instead. For iDVD, you just drag and drop your "master" on iDVD and it takes it from there. Both make a very professional product.
hope this helps.

Which ports are used by LMS 4.2.5 Software Center

Hi everybody!
we are trying to download device updates and packages via the software center of lms 4.2.5. but get the attached error msg.
Which ports are used for the download (for firewall configuration)
I can't find the used ports for this function in the install guide.....
I am very thankful for any suggestions!
Edit:
here is the log output:
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Sun Jan 04 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Sun Jan 04 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyHost] : No proxy Host configured
[ Mon Jan 05 00:30:01 CET 2015 ] INFO   [SecurityHandler : getCSProxyPort] : No proxy port confgured
[ Mon Jan 05 00:30:01 CET 2015 ] ERROR [CcoDownloadAdapter : getXmlFileList] : failed to connect to Cisco.com:RespCode=302, RespMsg=Found
there is no proxy in use, so the is none configured :)

Hi,
Looks like you are encountering this BUG
CSCur85172    Unable to installing the device packages from cisco.com using LMS Server
Try this to resolve the issue::
Stop Daemon Manager
2.            Change the protocol 'http' to 'https' for the below URL's in vds.properties
file located under /NMSROOT/lib/classpath/com/cisco/nm/xms/vds/.
NGCcoScript=http://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=http://tools.cisco.com/software/catalog/swcs/image
TO
NGCcoScript=https://tools.cisco.com/software/catalog/swcs/softwaremetadata
NGCcoImageScript=https://tools.cisco.com/software/catalog/swcs/image
3.            Start the Daemon Manager.
Thanks-
Afroz
****Ratings Encourages Contributors ****

Which tables are used for Quality Efficiency calculation of OEE report ?

Hello,
We're confirming OEE report behavior.
I'd like to know OEE report and ME table specification.
Which tables are used for Quality Efficiency calculation of OEE report ?
According to I know, the definition of Quality Efficiency is (complete qty) / (start qty).
For this calculation, does OEE report just use qty_started and qty_completed of PRODUCTION_LOG table?
If any other tables/columns/logic are implemented, your information is appreciated.
Best Regards,
Takahiro Uesugi

hi
Go to BSIS & BSAS
BKPF
SKA1
SKAT
SKB1
Regards
Roobal

Identifying which clips are used in browser

Similar Messages

Maybe you are looking for