Identifying which device id was synchornized in the middleware

Hi,
I needed to know how do we identify which device was synchronized in the middleware. In 7,1 when we use the client to sync the data the device id is not mentioned so how do we know in the middle ware which is the clients device. Also one particular user could have multiple devices.
could someone please clarify this doubt?

Hi,
You can use the device attribs to avoid this problem.
On the DOE say u can mention that the device should be picked up on
the basis of device name.
You can make the device name as a mandatory attribute for registration.
You can use :SDOE_DEV_REGISTER transaction
To check what device was picked up in case u dont have mandatory parameters you would need
to get the device ID from the portal and then check in the config file (MI/settings ) if the ID is present.
In case it is present then this the correct device that got registered.
Hope this helps.
Regards,
Shobhit
Edited by: Shobhit Garg on Jan 13, 2009 12:26 PM

Similar Messages

Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored.

I have bopped around the forums here for a while now, and while other people seem to have had the same problem as I am having in the past, I come to find that all of the solutions that have worked for others, do not in fact, work for me.
I am running Flash Professional CS6 On an Acer Aspire. 4 Gigs of RAM, 500 Gigs of HD.
The exact problem that I am having is as follows:
I record a sound bit in Audacity, Export the sound as and MP3 File on my main computer Hard Drive.
go to File>Import>Import to Library, I locate the file that I had created, then select it to be imported to my Library.
I then create a new layer in my timeline, Label it as sound, place a new key frame into the timeline layer at the place in the animation that i hope the sound would start, set the audio sync to stream instead of event, then press CTRL+ENTER, which initiates the Test Movie function.
At this time, the "Output" box Pops up and it states,
"Sound has no valid device sound path although exporting device sounds was requested in the export settings. This sound will be ignored."
No sound is played and i cannot, for the life of me, figure out why. I have tried all the troubleshoots that i can find online. I checked the publishing settings and nothing is being Overridden, I've attempted to untick the "export device sounds" option, but it is grayed out and cannot be toggled. I have attempted switching the MP3 format sound clip to a WAV format sound clip. I have attempted to re-recording the sound clip and re-importing the clip to the library. I have checked my computers speakers and everything is in working order and i have even checked to see if other projects sound works.
I pulled up a previous project that i had finished a while back that had loads of sound imported the exact same way and it all works exactly as i expect it too. The sound plays, there is not "Output" box claiming an issue. It seems that the issue, whatever it might be, is stuck to this project itself.
I have even started a new project, imported and placed both the MP3 and the WAV files into the sound layer created, CTRL+ENTER, and it works just fine without problem.
If there is anything that i might have accidentally messed up in this projected that you know about, like settings that may have been changed that would cause such an annoying and seemingly unfixable issue, please let me know. I really do not want to loose this project over such an utterly stupid error.

I've moved your question to the Flash Pro CC forum.

Sync merged my browsing history, how can I tell on which device page was opened ?

My browsing history was merged after syncing devices.
Now, when viewing merged history, how can I distinguish on which device page was originally opened ?
It is possible to add many columns to the history view, but unfortunately there is no 'Device name' among them.

Sorry, Right now firefox don't have that option..

HELP! I want to know whether my hand-me-down iPhone 4 is SIM/carrier-locked or not. I was given an iPhone 4 which I think was purchased outside the Philippines.

I was given an iPhone 4 which I believed was purchased outside the Philippines. The previous owner had it jailbroken but something went wrong so it was stuck on DFU mode. So when it was given to me, I had it restored and updated via iTunes to iOS 5.1. I bought a micro-sim and inserted it on the sim tray. iTunes was able to detect the SIM card number and there was NO MESSAGE like the sim card is not supported whatsoever which can be usually seen in unsupported simcard. I thought everything went smoothly. But when I tried to set-up the phone, the SLIDE TO UNLOCK button is unresponsive. It doesn't work so I was stuck there and my iPhone cannot be accessed because of that. What shall I do? I have tried doing the hard reset several times, it still didn't work. I have tried restoring my iPhone three times but the slide to unlock is still unresponsive. I think the iPhone was able to detect my carrier simcard since it shows on the top corner the name of my carrier, mobile signal and 3g network. Now I am wondering as to why the slide to unlock button is unresponsive? Was it because of my iPhone LCD or was it because the iPhone is locked? Please help.

according to some blogs, if the sim card you are using is unsupported, iTunes will show you a message that the sim card you are using is unsupported. But when i opened itunes, I didn't see that message. Instead, it was able to detect my sim card number. So I guess, the simcard is supported. It isn't the original sim, though. Then the phone was able to detect the mobile carrier, mobile and 3g signals. So iam wondering whether my phone is locked or was it a hardware problem?

My old computer died just after I transferred iTunes via external HD. When I transferred the content from the HD to the new computer, most songs won't play. Message is "Can't identify source". Sharing was on in the old computer when it died.

My old computer died just after I transferred iTunes via external HD. When I transferred the content from the HD to the new computer, most songs won't play. Message is "Can't identify source". Sharing was on in the old computer when it died.

Is there no ANSWER TO THIS PROBLEM?

I had to reboot my kids ipad cause she lost her passcode, anyway after i did this it was like a new ipad, lost everything, including the camera which i thought was part of the ipad. can anyone help

I had to reboot my kids ipad because she lost her passcode, in doing this it was like a new ipad everything was lost including her camera which i thought was part of the ipad. can anyone help

You are correct. The camera is part of the iPad and the app is part of the iOS so it cannot be deleted or downloaded again.
Assuming that your daughter has the iPad 2 or newer (the original iPad did not have a camera) ....
Swipe from screen to screen to look for it.
Check Settings>General>Restrictions and make sure that you didn't disable it.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.

How do you identify which device downloaded an app?

My family has two iPods, one iPhone, and an iPad. I just looked at my recent purchases and found a $20 purchase for Island Empire. First, I have no idea why a game costs that much, but I need to know which device was used to download the app.

Strange... Two options.
1. Connect each iDevice you have to iTunes. Right-click on its name under the Devices listing in the left side bar, Select "Transfer Purchases from xxxx."
2. In iTunes, sign in to the iTunes Store (once each with every Apple ID used); Select Prchased from the Quick Link section in the right-hand side bar; you can review all purchases by going thru each tab.

Can you tell which device downloaded a purchase from the App Store?

When you have multiple devices using the same AppleID, is there a way to tell which device downloaded a particlar song or in-app purchase? If so, can you please tell me the steps. Thank you

That's what I thought... seems ridiculous that this isn't traceable.. thank you for the response

How to identify Which function modules are used in the planning area?

Hi all,
there are couple of function module derviation is used to derive the calendar year, month, fiscal period etc.
But how to identify which function module is used in which planning area?
I cant find out from the where used list from function modules?
Thanks
pooja

Hi Pooja,
Go to characteristic relationship tab,click on detail icon on extreme left of the derivation,there you will get the name and the details of function module used for derivation.
Regards,
Indu

HT1386 How do I control which device's iCal is controlling the sync?

I make changes to my calendar on my iPad, but when I sync it with my computer it defaults to the iMac calendar and erases what is on the iPad. How do I control which device is the sync-er and the sync-ee?

Are you using iCloud?
If so, both teh Mac and iPad should be using iCloud.
Do not sync the calendar with iTunes.

How can I find a previous device that was registered with the same id but on a different laptop?

my laptop was stolen along with my ipod touch. It was registered with that laptop but I need proof for an insurance claim. how can i show i registered it (owned it) with my new laptop?
my ipod was previous to the most recent so i think thats a 4th gen
i've used the same apple id on both laptops
thanks

ok well my last laptop was the only lapyop used to sync my ipod (thought that meant it was registered)
i need proof of purchase for an insurance claim. i dont have the box because i threw it away when i got the ipod. is there any way of showing, on my new laptop, that i had my last ipod so that i can get a replacement.
cheers

How to identify which data has been inserted to the table in specific date

Hi,
i created one table without data column.. i am inserting data in that table.
i want which data has been inserted today..
Please help.
Thanks,

If you are in Oracle 10g you can use ORA_ROWSCN.Note that unless the table was created with ROWDEPENDENCIES enabled, though, ORA_ROWSCN is tracked at the block level rather than the row level. So a block with one new row and many old rows could appear as having all been entered today.
Justin

How can I identify which apps on my iPad are the largest?

According to iTunes and my System Status app, my iPad is using 96.7% of its disk space (27.6GB of 28.6). I'm trying to figure out which apps are taking up so much space. iTunes says I'm using 16.21GB for 257 apps. When I go into user/music/itunes/itunes media/mobile applications it shows 272 items using 7.26GB. I thought the 9GB difference might be related to data within the app however when I browse through the apps in the App tab of iTunes I only see about 1.8GB of data. So I'm trying to figure out where this 7.2GB of missing app space is located. Any ideas?

Thank you. It did not occur to me that the information in that section would be different than what is in iTunes. While it still raises questions (like why on the iPad video is 2.9GB but in iTunes it's 4.78GB), I can see the actual size of the app+data. Thanks!!

How to identify which rawdevice Disk Is named as VOL1 IN ASM from os level

Hi Friends,
disk creation using the ASMLIB
I want to know which disk is named as VOL1,VOL2,VOL3 etc,. from operating system LINUX .
i know using v$asm_disk we can query name,path, status, label, etc...
i want to know which raw device disk is named or configured as VOL1 from operating system(LINUX )
thanks in advance.
rajesh.
Edited by: rajeysh on Jun 3, 2010 3:49 PM

Well for this you can use oracleasm querydisk.Using this you can identify which device as marked for asm or not. for example you can see this below example.
[oracle@localhost init.d]$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jun 3 11:52:12 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select path from v$asm_disk;
PATH
/dev/oracleasm/disks/VOL2
/dev/oracleasm/disks/VOL1
SQL> exit;
[oracle@localhost init.d]$ su
Password:
[root@localhost init.d]# /sbin/fdisk -l
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1        1305    10482381   83 Linux
/dev/sda2            1306        9401    65031120   83 Linux
/dev/sda3            9402        9662     2096482+ 82 Linux swap / Solaris
/dev/sda4            9663        9726      514080    5 Extended
/dev/sda5            9663        9726      514048+ 83 Linux
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id System
/dev/sdb1               1        4859    39029886   83 Linux
/dev/sdb2            4860        9729    39118275   83 Linux
[root@localhost init.d]# ./oracleasm querydisk /dev/sdb1
Device "/dev/sdb1" is marked an ASM disk with the label "VOL1"
[root@localhost init.d]# ./oracleasm querydisk /dev/sdb2
Device "/dev/sdb2" is marked an ASM disk with the label "VOL2"
[root@localhost init.d]# ./oracleasm querydisk /dev/sda1
Device "/dev/sda1" is not marked as an ASM disk
[root@localhost init.d]# Also in windows :
C:\Documents and Settings\comp>asmtool -list
NTFS                             \Device\Harddisk0\Partition1           140655M
ORCLDISKDATA1                    \Device\Harddisk0\Partition2             4102M
ORCLDISKDATA2                    \Device\Harddisk0\Partition3             4102M
NTFS                             \Device\Harddisk0\Partition4           152617M
C:\Documents and Settings\comp> this is answer your question. :-)

Am i able to see which device is downloaded apps

i have app share turned on for 2 of my devices and some content was on them that was inappropriate and i wondered if you could tell which device it was downloaded on

No, you would have no way to see that. You can log into your account in iTunes on your computer and see when the particular app was purchased which might narrow it down. If you are using family sharing you can also set security such that apps cannot be purchased without your review.

Identifying which device id was synchornized in the middleware

Similar Messages

Maybe you are looking for