Idents at the start

Hi Guys,
Apologies if this has been asked before, I've done a search but to no avail. Should be simple.
Am creating a DVD and I want my logo to come on at the start of the DVD, pre-menu. It's a short video clip (like 20th century fox kinda thing) . I only want it to appear this once and then straight to the menu.
Thanks in advance
Tris

Set the logo for first play- rather than the menu.
Then have all the clips loop back (return) to the menu after play.
x

Similar Messages

  • Safari can't verify the identity of the website.........

    So yesterday I removed one stick of memory and added another (larger) stick of memory. This is the only thing I have done latly. I had surfed the net after changing ram and nothing seemed wrong. Today when I go to log in to my e-mail I get the warning that "Safari cant verify the identity of the website........" Found it a little odd. I went to another website where I am always logged in however this time I wasn't. When I clicked on the login button the safari warning appeared again. I checked two other sites that I frequent and am always logged into except now I'm not. It even appeared when I logged in to post this queston. Is this something to worrie about? Is there an virus or spyware I could have picked up somewhere? Is this a security issue? what's the problem? This is just too weird and I'm a little paranoid anyways.

    Hello Linc,
    April 13, 2015
    For years you've been a most valuable asset to me here at Apple.Com.
    I REALLY wish I could speak with you on the phone, because this is a little heavy.
    But for now I am TRYING to find the instructions/article that appears when you click the question mark "?".... that appears at the bottom of the drop down message which reads as follows....To see an image of it...the scroll halfway down and someone named WildBill posted an image of the drop down that is associated with the subject of this thread.....One of the 2 links below will show you a picture of the drop down and question mark.
    FIX for: "Safari can't verify the identity of the website" - certificate not valid
    Below is something that may or not be relative....but I just wanted you to see a photo of the drop down warning,...I think the one ABOVE is the one....the one below I'm not sure.....I am so tired right now.
    https://discussions.apple.com/thread/6983714?start=15&tstart=0
    Below is an article apple sent me but this is not what I was looking for
    OS X: Keychain Access asks for keychain "login" after changing login password - Apple Support
    There is a question mark that when you click on it sends you to an article/instructions on the side telling you what to do, but since I no longer get this pop up I can't find THAT article/instructions.
    I'm pretty sure the headline of the article read something like this.
    "What to do if Safari can't verify a security certificate as valid".....something like that.
    The reason I need to see those instructions again is I need to retrace my steps to make sure I didn't make a mistake when I was in Keychain Access.
    I called Apple and they didn't seemed interested in helping me.
    Perhaps you can.
    Thanks Linc,
    Apple Dreamer
    P.S....How do I know if you respond to this?.....Should of I left my phone number or email address?

  • How to unpin default apps from the Start Screen using vbscript

    Hi,
    I am looking for a way to programmatically unpin apps using vbscript from the Windows 8 Start Screen. I need to unpin SkyDrive, People, Calendar and messaging. I have been searching for a couple of days but I'm coming up with nothing so far.
    I know how to pin my own choices of installed apps using vbscript but I can't figure out how to unpin the default apps.
    Thanks,
    Rob

    Some thoughts:
    I started to investigate the many ways to manage the Metro start menu.  There are APIs but none are exposed to batch or VBScript.
    1.  Programs are installed into the 'All User' start menu, defult users profile start menu and a set of global links can be defined for metro.  THis is almost identical to ll previous versions except for the linking process which sets up the defaults. 
    If we install Office 20133 it will, if we choose, show up in all user start menu.  Each user can then unpin this. 
    2. There is a file (binary) that keeps track of the Metro settings.  It seems to only be changeable via the API or by using the shell 'pin/unpin' verbs.
    3.  This behavior I identical to XP and other systems with the exception of how it is stored and in that you cannot remove items from the sztart menu prior to Windows 8.
    4. The default user profile can be customized and stored on the network so that it affects every system.
    5. The "All Users" 'profile' can only be customized after a program is installed or by altering the programs installer.
    What you are trying to do runs counter to all Windows design since the first version of Windows.  We have NEVER been able to alter the start menu from script in such a way that a user could just add the item back in.  Your request seems to be incongruous
    to the design of Windows.
    Now don't get me wrong.  What you are asking is partially possible but you need to alter the Windows image so that the All users profile does not propagate the shortcuts.  You can do this by just deleting them.  You need to delete them before
    a user account is generated on the box. Delete them in the image. You can do this with MDT.  The shortcuts will not propagate to the user.  The user can still search for an app and add it to the start menu.
    There may be a better way to set this up but I cannot see how without using the API.
    ¯\_(ツ)_/¯

  • I need to cancel my account, but I cannot verify my identity over the phone

    I need to cancel my account, but I cannot verify my identity over the phone as I do not know what pin I entered, or what security answer I put in, and of course there are no recent numbers in my phone, but I'm still me, and I'm still the one who pays my bill, and I still need to close my account, and I need a way to do that. Honestly I'm getting quite frustrated here and am considering starting a lawsuit or submitting my story to a newspaper, I like verizon and thought I would get my next phone under verizon as well, but now I'm not so sure. But whatever the the case, even if I need to go somewhere in person with my id to prove that I'm the owner of my account, I need it closed.
    I really hope that someone here can help me solve this issue, or direct me to someone who can solve this issue for me. I think that the better business bureau would find it as atrocious as I do that a person could get looped into payments that they don't want and cannot get out of, now I know that this was not the intention, but I really do need to cancel my plan because I cannot afford the bill.

    How To: Direct Message  and  AyaniB_VZW

  • Stuck at BEA-090065 getting boot identity from the user

    Hi,
    We are trying to re-start the Weblogic Admin Server via cmd but it is not prompting for user id and password and it is getting stuck/stops at BEA-090065 "getting boot identity from the user".
    However, it was working initially.
    Please assist to resolve this issue

    Hi ,
    Please check if there is any file with the name "boot.properties" located under the domain directory . If so,
    take a backup of that file and replace the username and password with clear text (it will be in encrypted format) save the file and try to start the Admin server.
    Thanks,
    Sharmela

  • "Photoshop CC 2014 has stoped working" at the start of the program.

    This error occurs right at the start of Photoshop. Lots of people are having the same problem. They say you have to update your graphics cards. I updated both of them (Intel(R) HD Graphics 4000 and NVidia Geforce GT 735M). And still the same happens.
    Actually i managed to run Photoshop, but I had to disable the graphics cards... What is not good at all.
    How can I use Photoshop CC 2014 without having to disable my graphics cards?
    My computer is a Sony Vaio Fit 15 (model SVF15A1M2ES), 8Gb of RAM, Intel core I5, and those graphics cards (UPDATED GRAPHICS CARDS).
    Please help me out here lads, I am just trying to use the trial version so I can buy it later, and this is already getting me stressed. I'll probably stick to the good open source softwares that I am used to if we can't solve this, they never gave me any headaches. I was just following a friend's opinion on using Photoshop.
    Thanks in advance. Daniel.

    I think this is the crash report you asked:
    Log Name:      Application
    Source:        Application Error
    Date:          23/08/2014 01:52:27
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      DanielPC
    Description:
    Faulting application name: Photoshop.exe, version: 15.1.0.148, time stamp: 0x53d97a8f
    Faulting module name: igdfcl64.dll, version: 8.1.0.3372, time stamp: 0x52a21027
    Exception code: 0xc0000005
    Fault offset: 0x00000000008091a3
    Faulting process id: 0x23dc
    Faulting application start time: 0x01cfbe8e02304d40
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
    Faulting module path: C:\Windows\SYSTEM32\igdfcl64.dll
    Report Id: 4772adbd-2a81-11e4-becf-b8763fc246d8
    Faulting package full name:
    Faulting package-relative application ID:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-08-23T04:52:27.000000000Z" />
        <EventRecordID>44213</EventRecordID>
        <Channel>Application</Channel>
        <Computer>DanielPC</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Photoshop.exe</Data>
        <Data>15.1.0.148</Data>
        <Data>53d97a8f</Data>
        <Data>igdfcl64.dll</Data>
        <Data>8.1.0.3372</Data>
        <Data>52a21027</Data>
        <Data>c0000005</Data>
        <Data>00000000008091a3</Data>
        <Data>23dc</Data>
        <Data>01cfbe8e02304d40</Data>
        <Data>C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe</Data>
        <Data>C:\Windows\SYSTEM32\igdfcl64.dll</Data>
        <Data>4772adbd-2a81-11e4-becf-b8763fc246d8</Data>
        <Data>
        </Data>
        <Data>
        </Data>
      </EventData>
    </Event>
    And about the drivers. I used Vaio Update, as it searches and updates automatically. It didn't work, so I tryed downloading from NVidia directly, the same happened. And The Intel HD Graphics 4000 is customized for this pc so I can only update it by going to device manager and updating it, there is no way to do it from the website. In the device manager it shows both the drivers as up to date.
    Hope we can solve this. Thanks for your help so far.

  • GRC: Negative ack; PI: End tag 'enviNFe' does not match the start tag 'NFe'

    Bom dia SAP Boosters!
    Como muita gente estou aqui brigando com o GRC NFe. Esse forum tem resolvido meus problemas, até agora. Por isso inicio um novo tópico pois estou tendo o seguite problema que nao encontrei resposta:
    O grc e o pi estao em servidores separados. Do lado do grc, na sxmb_moni mostra para a interface BATCH_nfeRecepcaoLote_OB erro no acknowledgement status. abrindo o item error do ack msg id aparece:
    <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="BPE_ADAPTER">NEGATIVE_ACKNOWLEDGEMENT</SAP:Code>
      <SAP:P1></SAP:P1>
      <SAP:P2></SAP:P2>
      <SAP:P3></SAP:P3>
      <SAP:P4></SAP:P4>
      <SAP:AdditionalText></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
      <SAP:Stack>Negative acknowledgment triggered by a process</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    No lado do PI, ao consultar esta interface e abrir o payload do item Request Message Mapping, aparece a mensagem de erro: End tag 'n0:enviNFe' does not match the start tag 'NFe'. e todo o xml fica em uma linha só.
    Voltei entao no xml do sender e de fato encontrei a tag NFe, onde deveria constar os dados das notas fiscais, sendo aberta mas nao sendo fechada, e sem dados, desse jeito.
    <?xml version="1.0" encoding="utf-8" ?>
    - <n0:nfeRecepcaoLote2 xmlns:n0="http://sap.com/xi/NFE/006">
      <n0:cUF>35</n0:cUF>
      <n0:tpEmis>1</n0:tpEmis>
      <n0:tpAmb>2</n0:tpAmb>
    - <n0:nfeDadosMsg>
    - <n0:enviNFe versao="2.00" xmlns:n0="http://www.portalfiscal.inf.br/nfe">
      <n0:idLote>000000000000025</n0:idLote>
      <n0:NFe asx:root="" xmlns:asx="http://www.sap.com/abapxml"></n0:NFe>
      </n0:enviNFe>
      </n0:nfeDadosMsg>
      </n0:nfeRecepcaoLote2>
    Alguém já viu esse bug? estou com grc 10 e SP 08 e das notas que sairam depois nenhuma fala disso.
    Obrigado.

    Fiz um teste que parou de dar erro de acknowledgement e chegou a enviar o lote para a sefaz, que retornou erro de schema porque o xml continua vazio:
    Na interface determination gerada quando criei o cenário NFE_BATCH_WebAS_Outbound_Batch, a que contém a interface BATCH_nfeRecepcaoLote_OB, tirei o operation mapping BATCH_nfeRecepcaoLote2_TO_nfeRecepcaoLote2. Embora não seja mais retornada a mensagem de erro na tag, o payload continua no mesmo formato postado acima. Entao coloquei de volta.
    Bem, pesquisando vi que a função que gera o xml é a  /XNFE/006_SIGN_NFE_OUT. As notas aparecem como assinadas no monitor do grc, mas vou ter que ver entao como esta ocorrendo a geraçao do xml por esta funçao, certo?

  • I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • MBP 2.0 won't wake or load the start screen.

    My old 2006 MBP 2.0 won't start. Charger says it's charged. I have done a hard shut down. Rest, then tried to restart several times. The built in keyboard won't light up, tried connecting a usb keyboard and nothing. Their is no external hardware connected at this time. The start up screen never comes on. I can hear the cd drive try to rev after inserting diskwarrior but it won't boot holding down c. The sleep light on the front does come on. When I click cap lock the light does not come on. It appears the keyboard is not connecting up (built in one) I tried to force eject the disk warrior cd by holding down the eject button while starting up. I can hear rev but nothing else. Can't get the CD out either. Where do I go from here?

    Does it make the start up chime when powers up or nothing at all ?
    Does it make any beeps or does the light on the front flash a few times ?
    Hold down the trackpad mouse button when starting up as that's also an Eject trigger ...

  • Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

    Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue....  This thing is so annoying when trying to go somewhere i just want the error message to go away.

    In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
    http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

  • How to write the start routine in the transformations ?

    Hi Experts,
    I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
    *DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
    So Let me know if anyone can help me how to write the ABAP code in the start routine.
    Thanks
    sekhar

    Hi Experts,
    I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
    *DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
    So Let me know if anyone can help me how to write the ABAP code in the start routine.
    Thanks
    sekhar

  • The field "SOURCE_PACKAGE" is unknown IN THE START ROUTINE?

    Hi all,
    i am trying to create a start routine in the DTP FROM THE CUBE TO THE OPEN HUB.
    But when i check the syntax : it throws me an error message stating.
    The field "SOURCE_PACKAGE" is unknown IN THE START ROUTINE?
    how come the source package is unknow in the start routine can anyone pls advise  me on this!!
    DATA: l_tabix TYPE sy-tabix, wa_source_package TYPE tys_sc_1.
    LOOP AT SOURCE_PACKAGE INTO wa_source_package.
    l_tabix = sy-tabix.
    IF wa_source_package-SALES EMP EQ ' '.
    DELETE SOURCE_PACKAGE
    WHERE SALESEMP EQ ' '.
    INDEX l_tabix.
    ENDIF.
    ENDLOOP.

    Hi Pooja,
    I think that the error comes from the delete statement.
    As you already said, the SOURCE_PACKAGE is from BI7.0. That means that the LOOP AT statement cannot be wrong (although I prefer field-symbols)
    I would restate you code like below:
    DATA: l_tabix TYPE sy-tabix,
          wa_source_package TYPE _ty_s_sc_1.
    LOOP AT SOURCE_PACKAGE ASSIGNING <source_fields>.     "<source_fields> is declared as line from source_package
    * l_tabix = sy-tabix.
      IF <source_fields>-SALES_EMP IS INITIAL.
        DELETE <source_fields> FROM SOURCE_PACKAGE.
    * If this line does not work, try to add TABLE after the FROM-statement
    *WHERE SALESEMP EQ ' '.
    *INDEX l_tabix.
      ENDIF.
    ENDLOOP.
    Hopefully this will help.
    Alternatively you can try a single statement, because it is not necessary to do a loop.
    DELETE SOURCE_PACKAGE WHERE sales_emp IS INITIAL.
    Good luck!
    Steven Groot
    Edited by: S. Groot on Aug 11, 2010 7:50 AM

  • BW7.3 SOURCE_PACKAGE and DATA_PACKAGE are incompatible in the Start Routine

    Hi Gurus,
    a face a strange behavior with BW7.3 and the Inventory Cube 0IC_C03:
    the standard scenario works well when I activate the cube and its transformations ..bx, bf and um. Then I have modified the InfoCube 0IC_C03 and added some field like 0customer or 0doc_number etc. I also added the fields to the InfoSource 2LIS_03_BF_TR and everything was as usual.
    Then I wanted to activate the transformation TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03 when I had the error
    "E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
    I already tried to copy and paste the structure of tys_SC_1 to tys_SC_1_full but whenever I activate the transformation my changes are dropped while the error remains. I assume, that the problem is due the compilation process.
    Any hints to solve the problem? Thank you in advance.

    Hi Cemal,
    When we do the modifications at times the field structures inside the start routine are not update so that updation is required to be done manually. Copy the field list of structure (inside the start routine)  tys_SC_1 (this is gryed out i.e. change disabled) and paste the same structure to tys_SC_1_full & tys_TG_1_full.
    Check the routine and save it.
    Hopefully it will solve your problem.
    Regards,
    Dipika

  • I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.

    I have installed Adobe Premiere Pro cc on my laptop, but I cant find a way to start the program. No Icon, and it is not showing up in the start meny. It is showing up in add/remove programs, but nt anywhere else.

    If you are using a Mac, simply hit Command-Spacebar to bring up Spotlight Search.  Begin typing the name of the application and when you see what you are looking for, press enter.  You should get a hit by the second or third letter you type.  Great way to launch apps on computers that you are not familiar with.
    Windows 7 and 8 should have something similar.  I think you simply press the Windows key and begin typing.  Press enter when you see a match.
    Both Mac and Windows search tools can be customized to search for applications, files, emails and so forth.  For Windows, look for Taskbar and Start Menu Properties.  For Mac, go to Preferences Spotlight.  Turn off items you know you won't need to speed up searches.
    Make Windows 7 Start Menu Search Find Your Applications Faster

  • My mail app quits a few seconds after launching. I get a blank screen and then it goes back to the starter screen

    THe mail app on my ipad 2 quits right after launching. This happened as I was forwarding an email with a long attachment. Now I get a blank screen with just the icons, no mail mailboxes etc. after a few seconds that blank screen disappears and we go back to the starter screen. I tried rebooting, relaunching but no luck so far. Can somebody help me? Thanks
    Hans V

    Have you tried removing the email account from the app through settings?  I would try removing it, rebooting, opening the email app to see if it still crashes,  & then adding it back your email account. 
    If you're leary about causing more issues while you're not home, you could always try using a third party mail app (there are many), accessing your email through it...not a fix for your problem but a way to deal with the situation until you can get it worked out.
    Resetting all settings on the iPad (not deleting content) is a good way to clear many errors as it can remove leftover cache files & files that have become corrupt.
    Sorry I couldn't be of more help.  Good luck & let us know if you get it working.

Maybe you are looking for