IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit

Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtik

Hi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d"  Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle 
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM

Similar Messages

  • ColdFusion 5 - will it run under Windows 2003 Enterprise Server R2?

    I currently have ColdFusion 5 running on Windows 2000 and
    need to upgrade the os
    to 2003 Enterprise R2. I don't know, but I'm guessing, it
    will easier to continue using 5
    than to upgrade to 7 or 8.

    It could be a couple things;
    CTC only runs (and / or only runs well) on the specified version of JRE. It doesn't like anything older, it doesn't like anything newer ... the suggested version (1.3.something last time I looked - I don't remember off the top of my head).
    CTC takes forever to initialize (in some cases on our Lab stuff, I'm talking minutes ... up to 5-7 MINUTES before anything comes up).
    Start it and go have lunch, if it's not up when you get back, downrev your JRE and try again (then go home for the night, and see if it's up in the morning).
    If it's still not up, then try it on Windows 2000 server (or a VMware / VirtualPC session on S2003).
    If you're running it through something like a Citrix server, take a vacation for a few days ....
    This is not one of Cisco's finest software endeavours.
    Good Luck
    Scott

  • CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

    Hi,
    I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
    After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
    1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
    2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
    Any help on these problems will be appreciated.
    Thanks
    Best Regards,
    Ahmed

    Hi Rohit,
    Thanks for reminding the HTTPS option under Administration Control on ACS.
    I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
    Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
    Thanks
    Best Regards,
    Ahmed

  • Cannot install jwsdp-1.2 on Windows 2003 Enterprise Server

    Hello,
    We are trying to install jwsdp-1_2-windows-i586.exe on a Windows 2003 Enterprise Server system, but unfortunately we are not able to do this.
    Even worse the installation program simply stops without any message at all. So we have no clue how to proceed. Any help would be appreciated.
    Greetings,
    Erwin.

    Yes,
    I have attached the output, but the installation just stops..
    Greetings,
    Erwin.
    D:\install>jwsdp-1_2-windows-i586.exe -console
    Initializing InstallShield Wizard...
    Searching for Java(tm) Virtual Machine...
    Searching for Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Verifying Java 1.3.0 by IBM Corporation
    Searching for Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Verifying Java 1.3.0 by Sun Microsystems
    Searching for Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Verifying Java 1.3.X by Sun Microsystems
    Searching for Java 1.4X by Sun Microsystems
    Verifying Java 1.4X by Sun Microsystems
    D:\install>

  • SAPSprint installation on Windows 2008 R2 Server 64-bit

    Dear Gurus,
    as we change our print server to Windows 2008 R2 Server 64-bit I need to install SAPSprint for SAP printing with connection type 'S' out of a NW7.0 based system on HP-UX.
    Till now we used SAPlpd on a 32-bit Windows Server......
    1) Do I simply need to install the xSPrint.exe or can this happen only in combination with the whole SAPGui?
    2) According to note 66971 for Windows 2008 R2 Server 64-bit only SAPGui 7.20 is supported.
    Does this mean that I also have to use SAPSprint release 7.20 or can I use any other release as well.
    On our Windows clients we run SAPGui 7.10.
    Is there any correlation between the SAPGui running on the clients and the SAPGui / SAPSprint release running on the print server or can I simply install the highest SAPSprint release 7.20 on the print server to be sure that it will work with WK8 R2 64-bit?
    I hope I could explain my problem and I am looking forward to your reply.
    Thanks a lot in advance!
    Günter

    Dear Günter.
    Your question is spread over some different areas. Let me point out some tracks to follow:
    There is only a 32-bit version of SAPSprint but that one works also under 64-bit; please refer to SAP note 894444.
    Regarding SAPgui, in general it is recommended to have the last version as it is downwards-compatible with older versions.
    But specially, let me highlight that Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released.
    In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
    See SAP note 1383873 ("Windows Server 2008 R2 Support").
    You can be always up to date with the latest Windows news at:
    --> Support of Microsoft Windows Server 2008 R2
    Cheers!

  • Problem on installation of windows 2003 Standard Ed. 64 bit with 10 GB RAM

    Hi,
    I'm trying to install the Oracle 10G R2 on Windows 2003 Server Standard Edition 64 bit on HP machine 64 bit.
    My problem is that the Oracle is seeing just 4GB of RAM.
    I found some Oracle notes that explain this problem for machine and OS with 32 bit.
    Any idea?
    Thanks,
    Sergio

    Are you installing Oracle 32-bit?
    (In that case, the process virtual memory addressing is limited to 2^32 = 4GB. Note also it is virtual, not physical memory)
    64-bit editions (e.g. for X64) are available from:
    http://www.oracle.com/technology/software/products/database/oracle10g/index.html
    Message was edited by:
    orafad

  • Proper installation on Windows 2003 - SQL Server - SSIS Package

    We are attempting to access an Oracle 10g database from a SQL Server 2005 installation through SSIS (Windows 2003 x64). Our admin has installed the Oracle 11g client tools, we are developing in VS2008 (on XP x86). We seem to be connecting to the server through VS, but when running the package on the server we get errors as follows:
    Executed as user: <domain\sqlagentid>. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 4:06:01 PM Error: 2008-09-29 16:06:05.97 Code: 0xC001000E Source: Description: The connection "{03AFE9D8-A2E4-4C3C-9EDF-77603B9A7C1C}" is not found. This error is thrown by Connections collection when the specific connection element is not found. End Error Error: 2008-09-29 16:06:06.69 Code: 0xC001000E Source: <package_name> Description: The connection "{03AFE9D8-A2E4-4C3C-9EDF-77603B9A7C1C}" is not found. This error is thrown by Connections collection when the specific connection element is not found. End Error Error: 2008-09-29 16:06:06.69 Code: 0xC001000E Source: <package_name> Description: The connection "{03AFE9D8-A2E4-4C3C-9EDF-77603B9A7C1C}" is not found. This error is thrown by Connections collection when the specific connection element is not found. End Er... Process Exit Code 1. The step failed.
    We suspect the issue is in the initial installation steps. (BTW - we used a TNSNAMES.ORA that worked on our local machines.)
    Can anyone help?

    The errors you are showing are Microsoft errors not Oracle errors. You should take this up with Microsoft support.

  • CRM 2007 installation on Windows 2003 64bit server with oracle

    Hi Gurus
    In step INSTALL SOFTWARE UNITS
    the following errors are encounterded
    FCO-00011  The step enableUsageTypes with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|11|0|enableUsageTypes was executed with status ERROR
    The following message from java.exe.log
    Severe (internal) error. Return code: 16.
    Error message from sapinst_dev.log
    CJS-30156  SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/CRM2007/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/callSdmViaSapinst.log for more information.

    Hi,
    I also faced same issue.
    I have edited KEYDB.XML file. In that file replace ERROR woth OK and continue the installation. Before editing copy file  callSdmViaSapinst.log to know what are the components (failed components) need to be deploy after sucessfull installation.
    KeyDB.xml file located under location C:\Program Files/sapinst_instdir/CRM2007/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI
    This method is not recommended by SAP. If you find any other solution rather than this please update in same message.
    Suraj

  • SGA_TARGET SIZE 3GB in 10g Release 2 server on windows 2003 E Server?

    Is it possible to increase the SGA_TARGET greater than 3 GB on Windows 2003 Enterprise server(32-bit)?
    OS version : Microsoft Windows 2003 R2 Enterprise Edition
    Service Pack 2
    Bit Version : 32 bit
    Computer(SERVER) : Intel(R) Xeon(TM) CPU 3.60GHz
    3.59GHz, 15.5 GB RAM
    Physical Address Extension
    DataBase Version : Oracle 10g Release 2 (10.2.0.1.0)

    hi,
    As suggested earlier , please go through following notes as it will help you understand the concepts clearly
    Note:342080.1. This note talks in detail on how to use more than 4GB RAM on Windows.
    Note:225349.1 Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
    You can not set SGA_TARGET greater then 2.7 G on windows 32 bit machine. Yes , you can have SGA greater then 3 Gb but by using AWE which requires to unset SGA_TARGET and use db_block_buffers instead of db_cache_size.
    -Amit
    http://askoracledba.blogspot.com/

  • Steps For Oracle10gR2  RAC installation on  windows 2003 enteprise edition

    can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

    Hi,
    Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
    Check: System architecture
    Node Name Available Required Comment
    rac11 unknown 32-bit failed
    rac22 unknown 32-bit failed
    Result: System architecture check failed.
    Can anyone throw more light to resolve this issue.
    Note that i have successfully does this on Windows 2003.
    Any help will be highly appreciable.
    Thanks
    Nilanjan

  • Error while Installing R12.1.1 on Windows 2003 Enterprise Edition

    Dear All,
    I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
    I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
    When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
    Log File:
    =====================
    e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
    ================================
    Processing Step 3 of 5
    Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
    **** truncated *************
    - 3% completed
    \ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    ApplyAppsTechStack_03021625.log
    =========================
    Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
    Version:
         ApplyAppsTechStack.java     :      120.23
    Executing home registration for s_weboh_oh...
    Registering using Registration Driver
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
    setting permissions: 700
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    script returned:
    Timed out( 3750000 ): Interrupted Exception
    Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
    running OUI CLI home cloning:
    e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
    Executing script in InstantiateFile:
    e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    script returned:
    .end std out.
    .end err out.
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
    setting permissions: 700
    instantiate file:
    source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
    dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
    backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
    setting permissions: 700
    e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [APPLY PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
    ouicli.pl INSTE8_APPLY -1
    AutoConfig is exiting with status 1
    RC-50013: Fatal: Instantiate driver did not complete successfully.
    e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
    Pl. help me.
    Thanks and regards,
    Adm.

    AN Update:
    The Oracle Universal Installer shows the following in the screen before the error appears:
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
    ill be executed.
    Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
    ~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
    ler, Version 10.1.0.6.0 Production
    Copyright (C) 1999, 2007, Oracle. All rights reserved.
    ...............................................................Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    Val: 0
    Val: 0
    Val: 2
    Val: 0
    Val: 0
    path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
    ;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
    \MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
    m
    toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
    dowsGPortQueries.dll
    100% Done.
    Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
    .................................................Val: 0
    . 79% Done.
    Copy successful
    Setup in progress (Wed Mar 02 16:26:05 IST 2011)
    .....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
    opmnctl: opmn started
    Please help me.
    Thanks and regards,
    Adm

  • Using Windows 2003 enterprise edition?

    Hi,
    I am about to install a SAP j2ee instance in windows 2003.
    I was under the impression that only Windows 2003 enterprise edition was supported/recommended for SAP productive instances. Enterprise version is costly compared to standard version.
    Now, it looks like standard edition is acceptable itf you can handle memory limits (4GB for 32-bit and 32GB for 64-bit).
    Can someone confirm my assumption?
    thanks.

    Hi Eric. From instguide you can use this servers for 64 bit (example for Central System) :
    Windows Server 2003 :
    Windows Server 2003 Standard Edition
    Windows Server 2003 Enterprise Edition
    Windows Server 2003 Datacenter Edition
    For any version of Windows Server, you need the
    latest supported service pack.
    A suitable Windows Resource Kit is strongly
    recommended.
    You can't use 32 bit for Production system, in any case for release NW SR3 -->
    you can't even install on 32 bit platform.
    P.S. for HA for example you can't use Standart Edition ...
    P.P.S for example read this
    Re: SAP's compatibility with Windows Server 2003
    latest answer are from SAP member.
    Regards.
    Edited by: Sergo Beradze on Nov 12, 2008 10:54 PM

  • Admin Console errors in fresh install on Windows 2003 Enterprise.

    I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
    [26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
    I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
    Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
    Thanks,
    Sean

    Yes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
    I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
    libnspr4.dll
    libplc4.dll
    libplds4.dll
    nss3.dll
    nssckbi.dll
    smime3.dll
    ssl3.dll
    nsldap32v50.dll
    nsldappr32v50.dll
    nsldapssl32v50.dll
    If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
    Please report back what you find!

  • Identity Server under Windows 2003

    Hi All,
    can I run Identity server under Windows 2003 Server ? And, is planed Identity server version for Linux ?
    Thank You
    Lada D.

    A 4.0.1 backup can be restored on the new server - even if it is running 4.1 or 4.2. I don't believe the backup will carry over anything specific to the old server's IP address. I'd recommend that you keep the same hostname (DNS-wise) - especially for things like the server's SSL certificate - although that too won't be part of the application backup so you can give the new server a new name if the customer is strongly set on that.
    Note that you may change to soft appliance platform at this point. If the customer has a VMWare environment available, I'd strongly suggest considering this option. the soft appliance is a breeze to install and setup.
    In either case, please refer to the installation guide for details.

  • FMS on Microsoft Windows Server 2003, Enterprise Edition (64-bit)

    Hi,
    I am gotta buy Microsoft Windows Server 2003, Enterprise
    Edition (64-bit) for my deployment of FMS 2.
    As I read FMS 2 system requirement, it only support Microsoft
    Windows Server 2003, Enterprise Edition (not mention 32 / 64-bit).
    Does anyone got idea on this issue?
    Thx a lot!
    Alan

    At this time, FMS is only officially supported on the 32 bit
    version of Windows Server 2003.

Maybe you are looking for