IDES access key problem

I have installed IDES in my PC
But i am getting a problem while try create Z program in SE38.
it was asking for access key for z programs also
pls help me in this regard
what shoud i do
thanks in adv

I think your topic is out of scope here.

Similar Messages

  • IDES Acces Key Problem

    Hi guys
    i install demo version of SAP, but when i try to create a custom Z program in SE38 i got an ACCESS KEY problem, although i tried installation key "29671482393151224771", but its not working
    yes my installation NUMBER = INSTAL
    and other transcation is working like PA30
    is there any body how can help me out, suggestion....?

    If you have the priviledge, you can get the developer key from SAP Marketplace. Else you have to get the developer key from your Basis guy. He/She will get it from SAP Marketplace.
    In SAP Marketplace, go to Keys & Requests -> SSCR Keys

  • Access Key Problem

    Hi SAPsperts,
    My problem is as below:
    I want to make some modification to the transaction CO15, This transaction is for Production order confirmation. First we will give the Order number on the first screen. Then we will check for the goods movement. When we press Goods movement button and it takes me to the next detailed screen where I see the order items. I need to make the changes in this screen. As per my requirement I need to disable couple of fields in the table control.
    Now, I am going to SAP Service market place and creating the ACCESS KEY with below parameters
    Release : 700
    PgmID: R3TR Full Object
    Type: TRAN (As its transaction: I think this is the problem, We need to use some other combination for this)
    Object name: SAPLCOWB
    After registering the object, SAP is creating access key but when I put that key to incorporate the changes, it says INVALID ENTRY. I think the problem is the TYPE parameter which I used while creating the access key.
    Please let me know what should I put in that field to incorporate the changes?
    Regards,
    Hemal

    Jeevan Sagar wrote:
    I don't know who told you to change standard SAP Tcode but it is NOT at all recommended. This would cause serious inconsistencies when support packs are applied. SAP will not support if any problems should occur.
    >
    > ... if they're not available make the copy of standard transaction code.
    This is MORE dangerous than changing standard code. With a change, you get the modification assistant and for upgrade you get SPAU, so you can see exactly what has changed. If you clone a transaction, you don't get any fixes any more, there's no record of how the clone was made and how it differs from the original, and you've effectively written your own program to update standard SAP tables, which also means that SAP will not support you if any prolbems would occur.
    With cloning you get exactly the same risks as modification without any of the controls or records .
    For the OP. You must set the release, program id, type and object exactly as prompted, and ensure that you are registering the key for the correct installation. The key I will get for Release : 700 R3TR FUGR COWB will be different from the one you get as we have different systems.
    Edited by: Matt on Jan 2, 2012 9:12 AM

  • Access Key problem in SPROXY

    Hey guys
    when i m trying to create proxy using SPROXY,its askin me for access key ,what is access key and how can i get that?
    thanx
    ahmad

    HI Ahmed
    When ever you are trying to change the SAP standard program you require object access key.In order to get an access key you have to have a S user id S000xxxxxxx which is used to login to www.service .sap.com protal.You can get the more info at www.service.sap.com/sscr.
    Cheers,
    Shyam.

  • VOFM access key problem

    Hi SAP Gurus,
                          I want to write a customized routine in VOFM with routine number 601.For this i need to have the access key.So i have generated request for access key at Service market place, based on the object name RV64A601 and the object type is VSED.I even got the registration key but when i am using this regsitration key on VOFM for the respective routine creation, I am getting "incorrect entry" message.
                         If any one of you have requested for an access for any customizing routine pls help me ASAP.

    Obviously one (or all) of these items are incorrect:
    1) it's not  RV64A601
    2) it's not VSED (actually I think it should be PROG)
    3) System Release # is incorrect
    4) you got a wrong key
    When requesting a key, make sure to select the same values that you see on the screen where the key is requested. SAP is looking for an exact match. If anything is off, it's not going to accept the key.
    If you also need to enter the developer's key (which doesn't seem to be the case), make sure you have the correct key and correct user ID.

  • Replication for Data on DEV and QA - bad idea - primary key problem now

    I goofed.  I tried to use replication to keep the data on my dev machine up to date with the live server.  Now when I try to work on the database, adding new stuff, it fails.  It says there is a primary key problem every time I try to add
    a new item to a table with my program.  I should have realized this would happen!  Now, even though I've removed the replication, I'm having the problem.  Can anyone help me get my database functional again :/  Or should I resort to a database
    restore.  Thanks!

    So you have an IDENTITY column in your table? Run a
    DBCC CHECKIDENT (Transact-SQL) command with option RESEED to fix the current identity value to see if it works then.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • N91- music access key problem

    the multimedia key pressing which can be entered directly to the NOW PLAYING option of the music player is not working properly in my set.whenever i press that key a message is shown on the screen..."ITEM NO LONGER AVAILABLE.RESTORING DEFAULT MULTIMEDIA KEY SETTINGS"...i can't find the solution of the problem.can anyone help me???
    Solved!
    Go to Solution.

    I restore default settings by dialing *#7780# but it didn't work.
    someone told me to download new firmware mine is V2.10.013 and according to nokia official site I should download V2.20.008 but when I run Nokia Software Updater, it says Nokia doesn't support this one.
    I am afraid of giving my phone to anyone, because here in my country they may damage it more than before!
    I also downloaded Nokia_firmware_RM-43_EMEA_51[1].00_MCU_SW_2.20.008 from Rapidshare but I don't know how to use it.
    I would be so grateful if you help me.

  • Regarding access key for modify predifined fm in SAP IDES System

    hai to all,
    How can i find
    access key for modify predifined fm in SAP IDES System
    i have sap 4.7 dump(IDES)
    please give reply asap.
    thanks in advance,
    regards,
    surya.

    Hi Chandran,
    Thank you for the reply,
    how can i access this site, its asking username password,
    i didn't have both of these and even i'm unable to register also.
    how can i access.
    please respond
    regards,
    surya.

  • ABAP access key  & install step for  IDES ECC 5.0 oracle database

    Hallo
    if you have installation guide/steps for IDES ECC 5.0 (Oracle database) then please send me. also if you have ABAP access key for the IDES ECC 5.0 (SQL 2005 database) . My system details as
    SID=ERP
    instance no=00
    host=sapsrv
    database=SQL 2005
    Waiting for faveroable reply

    I really appreciate response for my question.
    I am trying to install a non-IDES version of ECC 5.0 (central, database, and dialog instances).
    Questoin : Do I need install Solution Manager 3.2 on the same server where I am installing ECC 5.0?

  • Access key for SAP 4.6C IDES

    Hi,
    Can any body send me the access key for SAP 4.6C IDES?
    I am unable to proceed further because of it.
    Please mail me that if you have to:
    [email protected]
    Regards,
    lokesh

    Hi
    You have to ask the person from whom you got this software of SAP IDES
    He will provide the Access key.
    Reward points for useful Answers
    Regards
    Anji

  • IDES ABAP Workbench and access key

    Hi everyone,
    I am new to SAP, please Help.
    1. How i can use OSS ID.
    2. I installed 4.6B IDES, but ABAP - Workbench is not
       accessable.
    3. How i can get Access Key for ABAP Workbench.
    Thanks in Advance
    Shareef

    Hi,
    If you have OSS ID, you can use it to logon to service.sap.com where you have all kinds of support and help services available. That is where you use it.
    ABAP workbench will be accessible if you have authorization. I think you mean to say you are not able to create/change objects. For this you will have to register your userid as developer (again at service.sap.com) and that will give you the developer access key that you can then use.
    If you are changing any SAP object, you will need to get the corresponding key from OSS.
    If you do not have OSS logon, then you can forget about it (well, not strictly so, but that is the official 'truth'.).
    cheers,
    Ajay

  • Accelerator/Access Key for commandLink problem

    I tried setting the access key for a commandLink but all it does is put the focus the command link and not trigger the action(unless enter key is pressed after pressing the access key). Is this the expected behavior or there is a way to make access keys execute action on commandLink?

    Hi Hyangelo,
    Even i am facing the same problem . I am using Jdeveoper 11.1.1.3.0 . I am having a commandLink , menu and commandNavigationItem , I am trying to access the component with accesskeys like giving ..
    <af:commandLink id="cl_onpage" partialSubmit="true"
    textAndAccessKey="#{ARUIBundle.Hello}"
    action="#{AccessBean.trigger}"></af:commandLink>
    wherein my accesskey is defined in my property file and it is 'H'. As i am using internet explorer i use alt + H as key combination . When i use the key combination , Only the focus is set to the component and the action with it is not getting triggered unless i hit the enter key.
    Can you let us know as to how you solved the issue . As you said it was taking a while for the action to be triggered. I tried the same , waited for 5 minutes but still the action did not get triggered.
    Thanks
    Vini

  • Problem in writing a  code MENU EXIT.. it is asking for access key.

    Hi,
    I have a problem in creating a menu exit.
    while am creating a menu exit i went to CUS to write code but it is asking for Access Key..
    could anybody help me regarding this..??
    Thank you,
    Praveen Dubasi.

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • Oss problem for getting Access Key

    Hi all,
          I have installed mini SAP . my license was expired that i have renewed... Now  I have logged on using   uname = bcuser .
           The problem is-- when I creating any program using se38, I am getting a pop up screen titled "Add  Developer".
    In that screen, asking for Access Key.. Also , You are not registered as Developer.  Please register in the OSS.In OSS you will  get Access Key..
          I tried lot , but unable to solve it.. Please give  me  the detailed solution for this..
         Thanks in Advance,
            Somu

    Please enter the following code as your developer key for the Sneak Preview NSP system.
    29671482393151224771
    Regards,
    Rich Heilman

  • Problems with Safari not being able to access key sites such as BBC news yet Firefox gives immediate access

    Does anyone else have a problem accessing key web sites using Safari? I am frustrated with Safari particularly as I can get Access immediately using Firefox

    I regularly use cleanmymac
    Which is a scam, but we can come back to that later.
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test. If there's no change, see below.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Maybe you are looking for

  • Error Message when creating a planning view in EXCEL

    Hi everyone, after activating the planning Area I succesfully uploaded a sample of  time series, master data and key figure. I get the following error when I try to create a new planning view with my set of data in EXCEL. I am still waiting from the

  • MIR7 Problem

    Dear All, My scenario is as following. I have 2 different vendor account numbers for the vendor. Now I have created two different PO for each vendor account. I have created Goods Receipt for that purchase order. So at that time my financial entry wil

  • Max number of retries of error message in integration engine

    Hi, I have a scenario which is generating lot of email alerts if goes in error in SXMB_MONI.... so then i ticked the  " suppress multiple alert " checkbox.....but because of this unless i complete one alert in the alert inbox another alert does not c

  • Album and artists have been deleted

    My song titles are all still there but my my album names, Genres, and artist names have all diappeared. Does anyone know how this has happened and what I can do to rectify it. Thanks

  • V240 no longer displays temperatures

    Is it me or prtdiag -v no longer displays temp. info. Currently I only see Temperature sensors: Location Sensor Status MB/P0 T_CORE okay MB/P1 T_CORE okay MB T_ENC okay PS0 FF_OT okay PS1 FF_OT okay And I believe it used to display the actual tempera