IDES data / not available...

Hello,
Finally have the IDES version of CRM up and running. Completed SGEN, Configured ICM and finally, GUI logon is possible.
Questions:
1) I checked in all clients, there seems to be no IDES related data. Is it possible I have missed a step? Or perhaps, I am looking in the wrong place? (I didn't check tables, don't know how to, yet.)
Then, I created two users: Salespro, Servicepro (with both having SAP_ALL profile) and assigned the following roles:
Salespro:
SAP_CRM_SALES_CONTRACT
SAP_CRM_SALES_ORDER
SAP_CRM_UIU_SLS_PROFESSIONAL
SAP_PCC_SALES_REP
Servicepro
SAP_CRM_UIU_SRV_PROFESSIONAL
SAP_PCC_SERVICE_MANAGER
SAP_PCC_SERVICE_REP
SAP_CRM_SERVICE_REQUEST
WebGui logon with Salespro seems to work fine. I am able to see Home, Worklist, Calendar etc.
However, with "Servicepro" logon, the system accepts the username but, that's it. Checking in SM04, I see two sessions for Servicepro. Hard drive activity indicates it's doing something but finally it times out. And the ICM timeouts are set at "KEEP ALIVE: 30,000 and PROC. TIMEOUT: 60,000".
2) What am I missing here?
Please point me in the right direction.

Hello Ravi,
It will be sure there in client 800.
The following clients are generally present in IDES ERP:
000 SAP AG
001 SAP Delivery
066 early Watch
800 IDES-ALE: Central FI Syst
810 IDES-ALE: Sales System
811 IDES-ALE: Production
812 IDES-ALE: Warehouse
For working on FICO/MM/SD.
the 8xx client are preconfigured. For your needs, 800 is the best choice for FI/CO and maybe 810 for SD
It might be a good idea, to copy these clients before users are working in them, so you can 'restore' the clients if the users need a fresh and intact client later in the future.
Also please check note : please check Note: 1013391
Regards,
Amit Barnawal

Similar Messages

Disk quota data not available.

I've got quotas enabled for my home dir volume, quotas set for all my users, and they appear to be working (logged-in users show the appropriate amount of space remaining in their home dirs).
But clicking on the Quotas section of Server Admin nets me a blank log page with "Data not available" at the top.
I've seen the quota chart on this machine before in earlier test builds, so I know what I should be expecting, but can't figure out why it's not showing up. Any ideas?
How do I rebuild or reindex the quota system, if that's what I need to do?
Thanks!

We are having the same issue since upgrading to 10.4.11. Currently we are investigating the possibility of accessing this information through the terminal using the 'quota' tools. I do not have ready access to the server though so progress is slow.
As far as I can make out if you can run 'fsck' this will the ASCII files that the user and group quotas are stored in and may effect a repair. I haven't yet been able to try this to see if it will work.
Anyone else got any suggestions?

Today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet

today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet
but card was charged full amount and i havent gotten anything else been checking for update all day and got nothing i did order iphone 6 plus at 3:01am and everything went through and i was finsihed at 3:06am

chriss2633,
I know how exciting it is to have all the information on the new phone. I did send you a Direct Message. Can you please respond back to that message? Looking forward to hearing back from you.
KevinR_VZW
Follow us on Twitter @VZWSupport

"Expected Ship Date: Not available at this time." Please help.

I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
Please PM with details if possible. Thanks in advance!
Subject was edited by: Verizon Moderator

Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
If not, I have sent you a DM so we may help look into this.
NicandroN_VZW
Follow us on twitter @VZWSupport

"Mobile Data Not Available", Nokia 700

Hey all,
I have a bare bones pay-as-you-go plan. All I get are free unlimited texts and free unlimited calls (within the country). I get no data and, frankly, I don't care for data. I do get annoyed that every so often while playing Angry Birds or using Nokia Maps or any of a number of other applications I will get the "Mobile Data Not Available" notice. How can I disable this notice? It is tiring and I KNOW I don't have Mobile Data. Duh! Thanks in advance for any help.

Hello TheRooster, the games are provided with some advertising option. This is Because the games are provided for free. If you buy the full version of the games then this won't occur.
Nokia C7

Data Not Available. Statspack data is not available for this database insta

Hi,
while trying to configure the 9i db on grid control I installed the statspack data while configuring it. But now when I try to see the historical data as part of the performace tab for the 9i db it complains as below
Data Not Available. Statspack data is not available for this database instance. Make sure that Statspack is installed on the target instance.
Please shed some of your inputs.
thanks in advance
PK

Hi,
I think it is not installed.
Using 1097660794 for database Id
Using 1 for instance number
, stats$database_instance di
ERROR at line 9:
ORA-00942: table or view does not exist
I did exactly as it said while configuring the db. but seems like something is wrong. Can you please advise me on how can I install it in commandline.
Thanks
PK

ORA-08176: consistent read failure; rollback data not available

Hi,
We implemented UNDO management on our servers and started getting these errors for few of our programs.:
ORA-08176: consistent read failure; rollback data not available
These errors were not coming when we were using the old rollback segments and we have not changed any code on our server.
1. What is possibly causing these errors?
2. Why did they not surface with rollback segments but started appearing when we implemented AUM and Temporary TS (instead of fixed TS used as temporary TS).
Our environment:
RDBMS Version: 9.2.0.5
Operating System and Version: Windows 2000 AS SP5
Thanks
Satish

NOt much in the alert.log. I looked at the trace file, it also does not have much information:
ORA-12012: error on auto execute of job 7988306
ORA-20006: ORA-20001: Following error occured in Lot <4407B450Z2 Operation 7131> Good Bad rollup.ORA-08176: consistent read failure; rollback data not available
ORA-06512: at "ARIES.A_SP$WRAPPER_ROLLUPS", line 106
ORA-06512: at line 1
*** SESSION ID:(75.13148) 2004-11-23 09:16:14.281
*** 2004-11-23 09:16:14.281
ORA-12012: error on auto execute of job 7988556
ORA-20006: ORA-20006: Following error occured in Lot <3351A497V1 Operation 7295> For No FL Rollup, Updating T_GOOD.ORA-08176: consistent read failure; rollback data not available
ORA-06512: at "ARIES.A_SP$WRAPPER_ROLLUPS", line 106
ORA-06512: at line 1
*** SESSION ID:(75.16033) 2004-11-23 09:28:10.703
*** 2004-11-23 09:28:10.703
The version we have is :
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
PL/SQL Release 9.2.0.5.0 - Production
CORE 9.2.0.6.0 Production
TNS for 32-bit Windows: Version 9.2.0.5.0 - Production
NLSRTL Version 9.2.0.5.0 - Production
Thanks
Satish

IPhone 6 - Expected Ship Date Not Available

I preordered a 16GB space gray iPhone 6 shortly after 3:01 AM EST on Friday September 12. In my confirmation email, it says the phone will be delivered by 9/19. However, when I look up my order number to track it, the Expected Ship Date is "Not available at this time".
Any ideas what's going on? I see a pending item on my credit card for the full amount of my order.Verizon Wireless Customer Support

I'm having same issue with my order. I've called, and the folks have been really nice on the cust service line, but they weren't able to give me any info and they still didn't send me my confirmation email. I was really hoping I would have my phone by 9/19, but at this point I'm kinda doutbful. I would really appreciate the VZW folks to help me out here. Did I mention I buy the caffeinated beverage of choice of any CSR who can help me out?!?? Thanks VZW, can't wait for my iphone 6 plus and volte!

Expect Ship Date: Not Available At This Time?

I preordered a 16GB space gray iPhone 6 shortly after 3:01 AM EST on Friday September 12. In my confirmation email, it says the phone will be delivered by 9/19. However, when I look up my order number to track it, the Expected Ship Date is "Not available at this time".
Any ideas what's going on? My card was charged.

I too woke up early and experienced aweful process time. I was on from 3:45AM to 5:10AM trying to complete my order. When I finished, it said arrival on the 19th. Great, right? Wrong.
Next I got an email confirmation that said Shipped by the Oct 7th. Wow that's a big delay! The, when I pulled the pre order number up on the site, that the link in the email takes me too, the next day it said the 19th. A few days later it said not available. Today, it finally updates now shows the 7th?
I get that it changed due to heavy demand but a few things bother me.
1st I called support and they couldn't help, they said they see the note of the 7th and couldn't confirm where I saw the 19th originally. Also they couldn't tell me when it would ship or provide any shipping confirmation. It seems strange but not the most upsetting part.
2nd, and more importantly. I explained to support that I ordered 3 total devicies, all of which are being delayed for one device! For myself, I ordered the 6+ space gray 64mb, for my wife the 6 silver 64mb, and my son a Galaxy S4 16GB. I did not understand why, even though I did it as one order, my wife's and son's phones were being delayed. It appears that only the 6+ is in short supply, and what is the cause for this delay. Everywhere it seems that there will be plenty of 6's out. She explained to me they could rebuild the order, but I would lose my spot on the 7th if I did so for my 6+? Is that really my only option? I have to wait now until November just so my son and wife can have their phone sooner? Or My wife and son have to wait until next month to get a phone I could go to the store and pick up tomorrow no problem? This is aweful.
I came from a (2nd largest) competitor, who I was with 8 years, and I've never seen anything handled like this on any pre-order with that provider. I am starting to regret my last 2 years at VZW, I came for the coverage and found it's no better in my area, more expensive, and now this? I am tempted to camp out with my old provider tomorrow and if I can land the phones switch back. Sometimes actions speak louder than words.
Good luck to everyone, maybe Apple can surprise everyone and get their supply up faster than the delay dates you have been given.

Cached data not available to clients

Hi All ,
I am loading table data to cache using putAll() . Data loads fine and if i try to access the data in same program , i can get it .
but if i try to access the cached data with some other client it is not available (getting null pointer exceptions ) .
is there any config change required to keep data in cache for other clients .I am using JPA beans for persistence .
Code to access the data
=========================================
public static void main(String[] args) {
CacheFactory.ensureCluster();
NamedCache currcache = CacheFactory.getCache("ClientMaster");
//These two commented lines of code is used to load data in cache using putAll .
// DataLoad data = new DataLoad();
//data.preload(currcache);
Set setKeys = currcache.keySet();
Map mapResult = currcache.getAll(setKeys);
ClientMaster cm =(ClientMaster)mapResult.get("ABC");
System.out.println("key"+cm.getClientDesc());
=========================================
Here is my cache-config file .
<?xml version="1.0" encoding="windows-1252" ?>
<cache-config>
<caching-scheme-mapping>
<cache-mapping>

<cache-name>ClientMaster</cache-name>

<scheme-name>jpa-distributed</scheme-name>
</cache-mapping>
<cache-mapping>

<cache-name>CurrencyMaster</cache-name>

<scheme-name>jpa-distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>jpa-distributed</scheme-name>
<service-name>JpaDistributedCache</service-name>
<backing-map-scheme>
<read-write-backing-map-scheme>

<internal-cache-scheme>
<local-scheme>
</local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>com.tangosol.coherence.jpa.JpaCacheStore</class-name>
<init-params>

<init-param>
<param-type>java.lang.String</param-type>
<param-value>{cache-name}</param-value>
</init-param>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>project1.{cache-name}</param-value>
</init-param>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>Project1</param-value>
</init-param>
</init-params>
</class-scheme>
</cachestore-scheme>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>

Now Getting this error when trying load data in cache using putAll , This is really weird as this same piece of code worked fine earlier.
Any ideas ?
============================================================
2011-01-11 13:45:47.165/14.266 Oracle Coherence GE 3.6.1.0 <Error> (thread=Distr
ibutedCache:JpaDistributedCache, member=6): BackingMapManager com.tangosol.net.D
efaultConfigurableCacheFactory$Manager: failed to instantiate a cache: ClientMaster
2011-01-11 13:45:47.165/14.266 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:JpaDistributedCache, member=6):
(Wrapped: Missing or inaccessible constructor "com.tangosol.coherence.jpa.JpaCacheStore(String,String,String)"
<class-scheme>
<class-name>com.tangosol.coherence.jpa.JpaCacheStore</class-name>
<init-params>

<init-param>
<param-type>java.lang.String</param-type>
<param-value>ClientMaster</param-value>
</init-param>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>project1.ClientMaster</param-value>
</init-param>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>Project1</param-value>
</init-param>
</init-params>
</class-scheme>) java.lang.reflect.InvocationTargetException
at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2542)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2426)
at com.tangosol.coherence.jpa.JpaCacheStore.<init>(JpaCacheStore.java:44
... 29 more
Caused by: java.lang.ClassNotFoundException: project1.ClientMaster
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at com.tangosol.coherence.jpa.JpaCacheLoader.initialize(JpaCacheLoader.j
ava:143)

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

Data not available in cube

Hi all,
I have just loaded the data from PSA to DSO, and then from DSO to Cube.
New requests enter in the Cube. When tried to check the contents of this new request, there is no data at all.
But if i check the contents of the requests of DSO , there is data in it. i have used this request to transfer the data to Cube , but in the cube i cannot find the data at all.
I have tried checking the contents of this cube by running a query in the Query Designer, but there also i could not find any data , it gives "no data found".
can any one please help me regarding this issue?
Thanks in advance..
Regds,
Maddy

Hi Maddy.
Please verify that there is no data in the cube from TA LISTCUBE.
You might have choosen some chars and KF that is not available in the cube in the query designer.
The records could also happen to not be updated in the cube because of update rules etc.
Hope it helps (assign points if helpfull!).
BR
Stefan

DAte not available in infotype 0041(date specification)

Hai All,
In our place we are using 4 type of "date type"
Z1 Hired date.
Z2 Seperation Date
Z3 Leave quota start
Z4 Service entry date
for all employees date specification maintain by dynamic action.
for some employees date specification is not maintain by the system.they are having only Z1 Hiring date only. others not available.
how can i rectify this problem?
Kind regards.
Dinesh.

Hi
You have to check your Dynamic action.
While querying dynamic ation how did you quaried, on which grouping you quried ?
The employee who dont get the details are members in that group are not?
if you give it in feature you must have all 4 dates to all the employees, otherwise you will be in trobuble
becuase SAP wont allow you fill the type only without date in infotype 0041
Regards
Adi

What does "Sorry, delivery dates not available right now." mean?

I am trying to order a TV and I keep getting this error message. Does this mean that the TV is completely out of stock in my area or does this mean that the TV delivery team is completely booked for the foreseable future? I tried another zip code in a different part of the US for the same TV and I don't get this error message. Thanks...

Hello SRZ,
This Samsung TV looks amazing and I'm glad to hear you were able to snag it! To my knowledge this message may be received if we do not have any delivery appointments available or if stock is not available.
I apologize for any concern this message may have caused you, and for any disappointment you may have encountered when you received a distant delivery date. If you should have any questions, please let me know!
Regards,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

PO - release dates not available in ME5A

Dear All,
For knowing PR date, release status, PO made, release status, I have the excel sheet generated from SAP.
In this, the PO release date is not being generated.
Can you please check and let me know what to choose so that I get that info together with PO created date.
If not available, can you please check possibility of creating the line item for our easy traking purposes.
Please let know ASAP.
Thanks
Rajesh

Hi
ME5A report is only for PR related data it will only show PO number which is created from PR and not the release date of PO.
Use ME2N to get PO release related data with dynamic seletion
Vishal...

IDES data / not available...

Similar Messages

Maybe you are looking for