IDES ECC6.0 including EHP4 on 32 bit machine

MARKUS,
I am installing IDES ECC6.0 including EHP4 on 32 bit machine.. I came to know from the following ( Note 1379040 - IDES ERP 6.0 ECC 6.0 incl. EHP4) that i cannot install IDES ECC6.00 on 32 bit,but i can install via system copy method.. I followed the exact method as mentioned in the same note. Installation was going smoothly but when it came to IMPORT ABAP PHASE..there were total of 103 files out of which 102 files was sucessful and 1 got failed.. Error is almost similar to tat what this thread has. I also saw that listerner was not started ,so i started the listener (status is showing listener is up) but still I am facing the same issue. I am pasting the log from SAPVIEW log file.
E:\usr\sap\ID9\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20091021202919
E:\usr\sap\ID9\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
E:\usr\sap\ID9\SYS\exe\uc\NTI386\R3load.exe: version R7.01/V1.4 UNICODE
Compiled Feb 24 2009 23:04:42
E:\usr\sap\ID9\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1034
DbSl Trace: CONNECT failed with sql error '1034'
(DB) ERROR: DbSlErrorMsg rc = 99
E:\usr\sap\ID9\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\ID9\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20091021202923
I also tried Note 709389 - Problems during load of SAPVIEW , but I am not very clear on how to go by this note.. I had rechecked the export DVD data's.. all are fine..
Please help me out of this issue.. Waiting for your reply..
Regards
Hari Narayanan.M

Hi,
Check SAP Note 491174 - Composite SAP note for ORA-01034
Thanks
Sunny

Similar Messages

SAPINST: install IDES ECC6 EHP4 ABAP+JAVA (Windows 32 - Oracle)

Hi,
I have received the new IDES ECC6 EHP4 DVDs and I nedd to install a ABAP+JAVA instance.
It is not clear which option I have to choose in the SAPINST program.
In the past was present ERP2005 central instance. And now ?
Thank
Andrea

Hi Andrea,
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system
As of SAP enhancement package 4 for SAP ERP 6.0, you can no longer install SAP
ERP dual stack (ABAP+Java) systems. If you want to use both SAP ERP ABAP and
Java Components in your system landscape, you have to proceed as follows:
1. Install a separate SAP ERP ABAP system.
2. Install a separate SAP ERP Java system.
3. Configure the connection of the SAP ERP Java system to the SAP ERP ABAP
back-end system
Hope this clarifies your concern!!!
Regards,
Rajesh

SAP MMC disk + work Stop(Ecc6( Adap+jav),win 2003 -32 bit , oracle-10.2)

Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization           DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function:   db_ntab
2EETW000 fcode:      NT_RDTDESCR
2EETW000 tabname:    TADIR
2EETW000 len (char): 5
2EETW000 key:        TADIR
2EETW000 retcode:    2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno      00
M sid        ACC
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    111
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm)          18672     (1436)
M DpShMCreate: sizeof(tm_adm)          4232256     (21056)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1536)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06DF1478   06DF6A14   06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   06DF1478   06DF6A14   06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C     SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c    12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c    12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS      does not exist on database            [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10283]
M
M Info for wp 0
M
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    req.vm = no VM
M    attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR       ThInit: db_connect
M *
M * TIME        Thu Apr 16 14:07:46 2009
M * RELEASE     700
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10486
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c   327]
thanks for support
keshava

Hi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        ACC
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    111
intno      20050900
make:      multithreaded, Unicode, optimized
pid        3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 111 successfully loaded
     shared lib "dw_xtc.dll" version 111 successfully loaded
     shared lib "dw_stl.dll" version 111 successfully loaded
     shared lib "dw_gui.dll" version 111 successfully loaded
     shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00                             <
DpShMCreate: sizeof(wp_adm)          18672     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00                             <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework

Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008

Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay Kumar

Hi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay

Install IDES ECC6- Abap Import phase error

Hi all,
I have seen many post on this error but I have not still understood why it happens.
I have tried to install an IDES ECC6 on Windows 2003S 32 bit with 4gb of RAM on a VMWARE virtual machine.
I have done all the preparation steps:
1) adjust network performance
2) set virtual memory as the installed RAM + 8GB
3) set the HOSTS file with the IP address
4) installed Java SDK with JAVA_HOME environment variable
I have installed Oracle (delivered with the kit) and the patch and then started the SAPINST (under I386).
In the APAB Import phase all the tasks (1 from 19) are stopped since Oracle is no more available.
All the posts suggest to enlarge the shared_pool_size.
But why this happens ?
The install procedure should work without any Oracle parameter modification.
Any idea ?
Thank
Andrea

Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday

46C- ECC6 upgrade with EHP4 SAP_BASIS package not found

We are executing an upgrade from 46C to ECC6 SR3 and binding in EHP4.
We have successfully downloaded EHP4 using Solution Manager MOPZ and
provided the generated "XML" file during the PREPARE.
During the phase EHP_INCLUSION, PREPARE is stopping with a message "No
matching SAINT package for 'SAP_BASIS' found".
The KB70102.SAR and KB70103.SAR packages from EHP4 have definitely been unpacked
and are available in /usr/sap/trans/EPS/in and we have prompted PREPARE to search EPS/in but it just returns to the previous error after searching.
It appears from the logs that the upgrade is expecting a "SAINT"
install package for SAP_BASIS and does not consider the KB70102/3
patches as acceptable?
Any clues as to why PREPARE is not accepting the SAP_BASIS packages and looking for a SAINT install?
Below is an excerpt from the EHP_INCLUSION.LOG
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_BASIS' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399      current: name = 'SAP_BASIS', release = '700'
4 ETQ399      patch type = 'U', ncvers-component = 'SAP_BASIS'
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
Regards,
Mike Tarr

Ok, I was able to download the K-701DHINSAPBASIS package from Service Marketplace and this resolved the SAP_BASIS problem. Thank you Markus for this solution.
I also downloaded the SAP_ABA, SAP_BW, and the PI_BASIS components and unpacked those as well in /usr/sap/trans/EPS/in.    My upgrade is now stuck asking for a SAINT package for SAP_ABA! I'm sure the SAP_ABA install, K-701DHINSAPABA, is unpacked and available in /usr/sap/trans/EPS/in.
The SAP_ABA files are definitely readable and there are entries in table PAT03_SDA for them.
I have a ticket open with SAP support but they have not had a solution yet for the SAP_ABA
Solution Manager failed to identify any of these packages as required in MOPZ.
I'm starting to wonder if anybody has ever done a 4.6C to ECC6 upgrade with EHP4 bound before?
Any ideas on the SAP_ABA would be appreciated. Here's a section of the EHP_INCLUSION.LOG file from PREPARE.
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399      Found: name = 'SAP_BASIS', release = '701', package = 'SAPK-701DHINSAPBASIS'
4 ETQ399 ... Matching package found: 'SAP_BASIS','701','SAPK-701DHINSAPBASIS'
4 ETQ399 (trc) R3upPatchDisassembleQueue: 1 package queue entries
4 ETQ399 (trc) R3upPatchDisassembleQueue: force=NO
4 ETQ399 (trc) R3upPatchDisassembleQueue: 0 packages will be disassembled
4 ETQ399 ... ... INST/UPG SAINT decision ok
4 ETQ399 ... EhP component SAP_ABA, 701
4 ETQ399 Looking for SAINT package for 'SAP_ABA' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399      current: name = 'SAP_ABA', release = '700'
4 ETQ399      patch type = 'U', ncvers-component = 'SAP_ABA'
4 ETQ399 R3upReadNewPackages:
4 ETQ399   patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399   ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
4 ETQ010 Date & Time: 20090511150018

RFC connection error between Netweaver 7 EHP1 and Ides ECC6

Hi Friends,
I try to create source system in BI from Netwever EHP1 to IDES ECC6 EHP3.
During the creation I get a connection error, says. check connction parameter.
I checked the parameter, everything is fine. Server, System and number.
When I went to the SM59 and created a connction.
I.E. with the same parameter like system = 06 and server = compi9 gave client 800 etc.
The Host name is resolved to 192.168.2.111 wich is OK.
But when I run the connection test it shows me "ERROR: partner '80.156.86.78:sapgw06' not reached"
I have no idea where this IP '80.156.86.78" is comming from.
No Problem with the opposite way, from Ides to NW and login to the System is OK too.
Can anybody help me with this problem.
RG. Jimbob

Hi,
What is the next screen that comes up when you click on remote logon.
If no screen comes up then:
Check the user type of the user id used for this RFC.
It should be either dialog or service user for able to remote login.
If it open a new window and asks for password, then its excatly password issue.
Also make sure that the password is in numeric and correct.
Also make sure that the current user check box is unchecked.
Even if it dosent work, delete the connection and create again.
Please award points if helps.
Thanks
Santhosh

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Error when installing IDES ECC6 on Windows 2008

Hi Experts,
I'm now trying to install IDES ECC6 SR2 on Windows 2008. However, I'm stuck at the very beginning of the installation - Oracle cannot be installed. I always get error which says something like program stopped due to exception, internal error ...
The JVM I'm using is jre 1.4.2-19.
Any suggestion?
Thanks a lot!!
Best,
Roger

Hi,
On windows server 2008, you cannot install oracle 10.2.0.1.0 and then patche that to 10.2.0.4.0. But u need to install the RDBMS 10.2.0.4.0 directly. This DB software is available in the oracle failsafe DVD.
Regd the JDK, it is better to go with JDK version 1.4.2.24 or 1.4.2.25.
BTW: I hope the OS u r using is not windows server 2008 R2(R2 is not yet supported by SAP)
Hope this clarifies.
Regards,
Varadharajan M

How to include ehp4 into ecc60 upgrade

Hi ,
I have a question about EHP4 and upgrade.
I have SAP R/3 4.7 win/sql 64bit and i want to include EHP4 into the upgrade.
I have downloaded EHP4 stack from MOPZ .
Is during the prepare that sap ask me to include EHP4 : so if i answer yes what will appen ? prepare search for the xml file and bind the EHP4 in the same way of the sap pathc (BINDPATH)?
Is r3up that automatically include EHP4 into the upgrade during downtime or ,at the finish of r3p, i have to run the
ehpi installer and do SPDD and SPAU more than one time ?
Thanks a lot for the answer !!!!

Hi,
You can do the upgrade untill ECC 6.0 EHP4 in one step, just download the files or put an order with SAP so they can send you the media. There is a set for upgrade specifically for this. If you wanted to upgrade to ECC 6.0 EHP1, EHP2 or EHP3 then you need to do it in two steps but in your scenario only one step is necesary.
By the way now you will use SAPup, not R3up like before
Regards,

Which files are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

Hi Bhipra,
You need below DVDs for ERP 6.0 EHP6 IDES
51041985_11
DB2 USER ENV
70SWPM10SP06_4-20009707.sar
70SWPM10SP06
51044815_1
BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51044815_10
BD IDES SAP ERP 6.0 EHP6 Inst. Export 10 of 40
51044815_11
BD IDES SAP ERP 6.0 EHP6 Inst. Export 11 of 40
51044815_12
BD IDES SAP ERP 6.0 EHP6 Inst. Export 12 of 40
51044815_13
BD IDES SAP ERP 6.0 EHP6 Inst. Export 13 of 40
51044815_14
BD IDES SAP ERP 6.0 EHP6 Inst. Export 14 of 40
51044815_15
BD IDES SAP ERP 6.0 EHP6 Inst. Export 15 of 40
51044815_16
BD IDES SAP ERP 6.0 EHP6 Inst. Export 16 of 40
51044815_17
BD IDES SAP ERP 6.0 EHP6 Inst. Export 17 of 40
51044815_18
BD IDES SAP ERP 6.0 EHP6 Inst. Export 18 of 40
51044815_19
BD IDES SAP ERP 6.0 EHP6 Inst. Export 19 of 40
51044815_2
BD IDES SAP ERP 6.0 EHP6 Inst. Export 2 of 40
51044815_20
BD IDES SAP ERP 6.0 EHP6 Inst. Export 20 of 40
51044815_21
BD IDES SAP ERP 6.0 EHP6 Inst. Export 21 of 40
51044815_22
BD IDES SAP ERP 6.0 EHP6 Inst. Export 22 of 40
51044815_23
BD IDES SAP ERP 6.0 EHP6 Inst. Export 23 of 40
51044815_24
BD IDES SAP ERP 6.0 EHP6 Inst. Export 24 of 40
51044815_25
BD IDES SAP ERP 6.0 EHP6 Inst. Export 25 of 40
51044815_26
BD IDES SAP ERP 6.0 EHP6 Inst. Export 26 of 40
51044815_27
BD IDES SAP ERP 6.0 EHP6 Inst. Export 27 of 40
51044815_28
BD IDES SAP ERP 6.0 EHP6 Inst. Export 28 of 40
51044815_29
BD IDES SAP ERP 6.0 EHP6 Inst. Export 29 of 40
51044815_3
BD IDES SAP ERP 6.0 EHP6 Inst. Export 3 of 40
51044815_30
BD IDES SAP ERP 6.0 EHP6 Inst. Export 30 of 40
51044815_31
BD IDES SAP ERP 6.0 EHP6 Inst. Export 31 of 40
51044815_32
BD IDES SAP ERP 6.0 EHP6 Inst. Export 32 of 40
51044815_33
BD IDES SAP ERP 6.0 EHP6 Inst. Export 33 of 40
51044815_34
BD IDES SAP ERP 6.0 EHP6 Inst. Export 34 of 40
51044815_35
BD IDES SAP ERP 6.0 EHP6 Inst. Export 35 of 40
51044815_36
BD IDES SAP ERP 6.0 EHP6 Inst. Export 36 of 40
51044815_37
BD IDES SAP ERP 6.0 EHP6 Inst. Export 37 of 40
51044815_38
BD IDES SAP ERP 6.0 EHP6 Inst. Export 38 of 40
51044815_39
BD IDES SAP ERP 6.0 EHP6 Inst. Export 39 of 40
51044815_4
BD IDES SAP ERP 6.0 EHP6 Inst. Export 4 of 40
51044815_40
BD IDES SAP ERP 6.0 EHP6 Inst. Export 40 of 40
51044815_5
BD IDES SAP ERP 6.0 EHP6 Inst. Export 5 of 40
51044815_6
BD IDES SAP ERP 6.0 EHP6 Inst. Export 6 of 40
51044815_7
BD IDES SAP ERP 6.0 EHP6 Inst. Export 7 of 40
51044815_8
BD IDES SAP ERP 6.0 EHP6 Inst. Export 8 of 40
51044815_9
BD IDES SAP ERP 6.0 EHP6 Inst. Export 9 of 40
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
Hope this helps.
Regards,
Deepak Kori

Installation Guide for IDES ECC6

Hi........
I need to install IDES server.
can any one please provide me the IDES ECC6.0 installation guide.
Operating system :Windows NT
DB: Oracle 10.2.0.1.0
Thanks in advance.............
Regards
Raja.

Hi,
Checkout
https://www.service.sap.com/instguides
Good luck

Problem with integration of IDES ERP 6.0 EHP4

Dear friends,
We have to integrate IDES ERP 6.0 EHP4 sytem to Solutionmanager 7.1 SP4.
We are not able to add the product instance SAP ERP 6.0 as mentioned in:
http://wiki.sdn.sap.com/wiki/display/SMSETUP/MaintenanceofProductintheSystemLandscape
Under landscape verification, selection for IDES system in product assignements is red, it's requires not only "ABAP technology for ERP EHP4" , but also "SAP ECC Server" with Productversion SAP ERP 6.0. As allready mentioned, it's not possible to add under TC "/nLMDB".
Thanks for any hint
Kind regards
Thomas

Hi Thomas,
In LMDB, until you have maintained the details properly status shoudl be red.
For technical content, you have to manually add all the details , like system name, host, DB server credentiials, instance number,
product instances, software component versions.
you can edit that using techical system editor.
you can get the LMDB demos on service.sap.com\rkt-solman
please check,
Thanks,
Jansi

Missing Info Objects and Business Content in IDES ECC6 with BI7.0

Hi All,
I do not see most of info objects like 0COMP_CODE, 0BUS_AREA, 0RESP_PERS etc. and lot of objects missing in Business Content too.
I have IDES ECC6 with BI7.0.
Could someone please help me to retrieve those objects.
Thanks.

Hi Kishore,
Thanks for the info. I am little confused. I thought i had full BW in my ECC6. What is the difference between ECC6.0 with BW and ECC6.0 with BW/BI7.0? BI7.0 has all business contents in it?
The IDES software has BW/BI 7.0 in it. That is what the person whi gave me told me. How can i verify that?
I have some knowledge of BW and i am trying to learn this new BW 7.0 on my own. Since it does not have BI content how can i proceed to learn on my own.
Please help. Thanks.

Which file are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

IDES ECC6.0 including EHP4 on 32 bit machine

Similar Messages

Maybe you are looking for