IDES ECC60 tib installation with Aronis
Hi all:
Here is the background, can anybody help me? Really appreciate!
Today I tried to install the ECC60 version with Aronis twice(restore one large tib file(about 47.1G) to my external portable hard disc). After 2 hours' recovery, I see 2 partitions on my portable hard disc, and there is no error during the installation. But after that, I can not start ECC server. Per the installation guide, I see from the pic that there are some shotcut on the desktop, while I can see nothing. So then I double click the SAP Management.exe from the folder, to see the error message like ".dll failed to register on drive C".
I see from one thread that may need to reboot from the disc where you restore the tib file to(in my case, that is my mobile disc). But I remember that XP and window2003 do not allow to boot computer with an external hard disc. Is the guide right?
Can anybody tell me: after the recovery, is there any other step needed? Many thanks~
Below are the steps I install:
1. Desktop with 120G's hard disc with 2 partitions. Drive C installed windows2003 while Drive D contain the large tib file(around 47G).
2. Restore the tib to the empty external hard disc(960G), after recovery, the hard disc is automatically formatted into 2 partition: DIRVE(C) and DIRVE(D), C with the operating system while D with SAP. The whole process is successful, no error.
3. After that, when I tried to launch SAP Management.exe, error message popper up which says the dll not registered on Drive C.
Thanks and Best regards
Tim
> The Sap Management.exe resides in my external hard disc. There are 2 C drivers on my computer: one is where my operating system resides, that is the internal disc. the other is the recoveried system. I use Aronis to restore one .tib file to my external hard disc, after that, my external hard disc was automatically formatted into 2 partitions: C Driver and D Driver, and I launched the Sap Management.exe on the C Drive of my external disc.
So that means you have "two" C: drives?
> Did anybody once install ECC60 with Aronis? Or know what to do after recovery? I guess there should be some additional steps after recovery, since now there are 2 operating system on my computer: one is the original operating system while the other is the restored file system, but I don't know how to boot into that system.
I suggest you contact the backup software vendor how to use the software properly. You may need to enter a boot.ini entry to boot the second operating system. Also keep in mind that some windows filesystems are shared and that the latter installation may have overwritten parts of the first installation.
Markus
Similar Messages
-
SAP R-3 IDES 4.71 installation with Oracle9i
Hello
I am having problems installing SAP R-3 IDES 4.71 installation with Oracle9i on windows 2003 Server. The log file comes up with this erorr
INFO 2008-05-14 22:50:30
Changed working directory to C:\SAPinst ORACLE SAPINST.
INFO 2008-05-14 22:53:59
See 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' output in 'C:\SAPinst ORACLE SAPINST\startsap.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2030-05-14 22:53:59
MOS-01012 PROBLEM: 'C:\usr\sap\DEV\SYS\exe\run/startsap name=DEV nr=00 SAPDIAHOST=bw2003' returned with '-1' which is not a defined as a success code.
Windows 2003 Server
AMD 2GH Dual core
2GB Ram
250GB HDD
Computer name: bw2003
Central instance: DEV
I checked the host file system32/drivers/etc the IP adress and the host name is there.
I am hoping that someone could help me with the installation thanks in advance.
waiting .....ok here you go
dev_disp
trc file: "dev_disp", trc level: 1, release: "620"
Sat May 18 00:27:08 2030
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 2276
***LOG Q00=> DpSapEnvInit, DPStart (00 2276) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 9776 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 042F0040, size: 1974816)
DpShMCreate: allocated sys_adm at 042F0040
DpShMCreate: allocated wp_adm at 042F0560
DpShMCreate: allocated tm_adm_list at 042F2B90
DpShMCreate: allocated tm_adm at 042F2BB8
DpShMCreate: allocated wp_ca_adm at 0448F878
DpShMCreate: allocated appc_ca_adm at 04493EC8
DpShMCreate: allocated comm_adm_list at 04495638
DpShMCreate: allocated comm_adm at 04495650
DpShMCreate: allocated ca_info at 044C4450
DpShMCreate: allocated wall_adm at 044C4458
MBUF state OFF
Sat May 18 00:27:09 2030
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 307 MB
<ES> 306 blocks reserved for free list.
ES initialized.
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, NiPServToNo ( sapmsDEV) [nixxi.c 2599]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1451]
Sat May 18 00:27:18 2030
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sat May 18 00:27:32 2030
CCMS: start to initalize 3.X shared alert area (first segment).
Sat May 18 00:27:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
Sat May 18 00:27:50 2030
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:28:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:29:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W0 (pid 2328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 2416) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
my types changed after wp death/restart 0xbf --> 0xaf
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:30 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W5 (pid 2368) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 2376) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 2384) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
my types changed after wp death/restart 0xaf --> 0xad
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:29:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W2 (pid 2344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W8 (pid 2392) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W10 (pid 2408) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W12 (pid 2424) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
my types changed after wp death/restart 0xad --> 0x89
ERROR => MsIModTypes: not_attached [msxxi.c 1567]
Sat May 18 00:30:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W1 (pid 2336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
Sat May 18 00:30:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:30:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:31:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
ERROR => W3 (pid 2352) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 2360) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W9 (pid 2400) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
Sat May 18 00:32:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:32:51 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:33:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:11 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:13 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
Sat May 18 00:33:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:33:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:34:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:35:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:36:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:37:33 2030
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 3885]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
ERROR => MsISnd2: not_attached [msxxi.c 1139]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 3966]
Sat May 18 00:37:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:38:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:39:49 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:09 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:29 2030
***LOG Q0I=> NiPServToNo: getservbyname [ninti.c 428]
***LOG Q0A=> NiIServToNo, service_unkown ( sapmsDEV) [nixxi.c 2580]
ERROR => MsIAttach: NiBufConnect to bw2003/sapmsDEV failed (rc=NIESERV_UNKNOWN) [msxxi.c 545]
Sat May 18 00:40:30 2030
caught signal 2
Sat May 18 00:40:42 2030
***LOG Q05=> DpHalt, DPStop ( 2276) [dpxxdisp.c 7883]
dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sat May 18 00:27:19 2030
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 2328
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2328) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M
M Sat May 18 00:27:24 2030
M DpShMCreate: sizeof(wp_adm) 9776 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04AF0040, size: 1974816)
M DpShMCreate: allocated sys_adm at 04AF0040
M DpShMCreate: allocated wp_adm at 04AF0560
M DpShMCreate: allocated tm_adm_list at 04AF2B90
M DpShMCreate: allocated tm_adm at 04AF2BB8
M DpShMCreate: allocated wp_ca_adm at 04C8F878
M DpShMCreate: allocated appc_ca_adm at 04C93EC8
M DpShMCreate: allocated comm_adm_list at 04C95638
M DpShMCreate: allocated comm_adm at 04C95650
M DpShMCreate: allocated ca_info at 04CC4450
M DpShMCreate: allocated wall_adm at 04CC4458
X
X Sat May 18 00:27:28 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Sat May 18 00:27:33 2030
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C
C Sat May 18 00:28:05 2030
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C
C Sat May 18 00:28:06 2030
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=062414CC,svrhp=06243724)
C
C Sat May 18 00:28:17 2030
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C
C Sat May 18 00:28:33 2030
C Now I'm connected to ORACLE
C Got SAPDEV's password from table SAPUSER
C Got SAPDEV's password from OPS$-user
C Disconnecting from connection 0 ...
C
C Sat May 18 00:28:34 2030
C Closing user session (con_hdl=0,svchp=062414CC,usrhp=0624BEFC)
C Now I'm disconnected from ORACLE
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=062414CC,srvhp=06243724,usrhp=0624BEFC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C Database instance dev is running on BW2003 with ORACLE version 9.2.0.2.1 since 20300518
B
B Sat May 18 00:28:35 2030
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 20300518 002733 BW2003
M
M Sat May 18 00:28:36 2030
M db_connect o.k.
I
I Sat May 18 00:29:01 2030
I MtxInit: 0 0 0
X
X Sat May 18 00:29:02 2030
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13
B dbtbxbuf: Buffer TABL (addr: 0C2000C8, size: 30000000, end: 0DE9C448)
B dbtbxbuf: Buffer TABLP (addr: 0DEA00C8, size: 10240000, end: 0E8640C8)
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 276 = 276
B 2: 13 * 20 = 260
B 3: 4001 * 40 = 160040
B 4: 2000 * 128 = 256000
B 5: 4001 * 4 = 16004
B 6: 1 * 100 = 100
B 7: 65 * 4 = 260
B 8: 29385 * 128 = 3761280
B Tracing = 0, Shm Protection = 0, Force checks = 0
I *** ERROR => [CreateOsShm] CreateFileMapping(54,4096 KB) failed with Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for this operation to complete. [shmnt.c 2055]
I *** ERROR => ShmCreate: Create (54,4194384,1) failed [shmnt.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 1
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 589824 K
Config. maximum size : 1179648 K
Avail. maximum size : 1179648 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
C:\pagefile.sys
589824 K
1179648 K
1179648 K
1178900 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 1670224 K
Commit Charge Limit : 1676596 K
Commit Charge Peak : 1670376 K
Phys.Memory Total : 0 K
Phys.Memory Available : 0 K
File Cache : 0 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1133576 K
Private Pages : 0 K
Total heap size : 10729 K
Virtual memory regions : 0 K
Uncommitted heap memory : 4108 K
Allocated heap memory : 4406 K
Moveable heap memory : 24 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4
72 K
2100 K
0 K
0 K
3
352
smss.exe
212 K
448 K
144 K
160 K
0
424
winlogon.exe
996 K
9048 K
6188 K
6580 K
3
468
services.exe
1276 K
3136 K
1436 K
1564 K
0
480
lsass.exe
2148 K
6544 K
7048 K
7048 K
1
676
svchost.exe
552 K
2508 K
832 K
832 K
0
848
svchost.exe
4840 K
22520 K
13348 K
19208 K
9
972
spoolsv.exe
712 K
4060 K
3220 K
3228 K
1
1124
svchost.exe
392 K
1956 K
476 K
476 K
0
1176
agntsrvc.exe
948 K
7720 K
9128 K
9128 K
1
1196
TNSLSNR.exe
2432 K
5720 K
5764 K
5776 K
1
1212
cmd.exe
384 K
1572 K
1488 K
1488 K
0
1228
ORACLE.EXE
122564 K
135924 K
203080 K
205256 K
38
1324
SAPSTARTSRV.EXE
2520 K
13364 K
14828 K
14828 K
3
1420
VMwareService.exe
928 K
2164 K
604 K
604 K
0
1528
dbsnmp.exe
2240 K
11312 K
13608 K
39264 K
3
1816
Explorer.EXE
2928 K
15120 K
10200 K
10332 K
13
1864
jusched.exe
252 K
1764 K
432 K
432 K
0
1872
VMwareTray.exe
724 K
3144 K
852 K
888 K
0
1880
VMwareUser.exe
1376 K
3284 K
1032 K
1048 K
0
1996
svchost.exe
488 K
3740 K
1440 K
21664 K
1
216
svchost.exe
800 K
3708 K
2788 K
2788 K
0
2080
sapinst.exe
82868 K
105272 K
84324 K
105292 K
41
2088
javaw.exe
6944 K
21272 K
20396 K
20896 K
6
2200
startsap.exe
460 K
1772 K
748 K
748 K
0
2212
sapstart.exe
1244 K
3176 K
1188 K
1188 K
0
2276
disp+work.exe
[DP] DEV_00
26740 K
42464 K
30176 K
30176 K
10
2312
gwrd.EXE
[GW] DEV_00
1852 K
6116 K
3936 K
8208 K
1
2320
icman.EXE
56440 K
60192 K
75880 K
75880 K
17
2328
disp+work.EXE
[WP] DEV_00
10700 K
11516 K
43684 K
43788 K
7
2336
disp+work.EXE
[WP] DEV_00
6696 K
13084 K
42180 K
42180 K
6
2344
disp+work.EXE
[WP] DEV_00
10896 K
14092 K
42180 K
42180 K
6
2352
disp+work.EXE
[WP] DEV_00
10088 K
14588 K
42176 K
42176 K
6
2360
disp+work.EXE
[WP] DEV_00
9320 K
12960 K
42184 K
42184 K
6
2368
disp+work.EXE
[WP] DEV_00
9480 K
13076 K
42184 K
42184 K
6
2376
disp+work.EXE
[WP] DEV_00
10060 K
13220 K
42180 K
42180 K
6
2384
disp+work.EXE
[WP] DEV_00
10024 K
15128 K
42184 K
42184 K
6
2392
disp+work.EXE
[WP] DEV_00
6576 K
14752 K
42180 K
42180 K
6
2400
disp+work.EXE
[WP] DEV_00
8812 K
13436 K
42184 K
42184 K
6
2408
disp+work.EXE
[WP] DEV_00
8552 K
16140 K
42180 K
42180 K
6
2416
disp+work.EXE
25744 K
25972 K
41644 K
43788 K
10
2424
disp+work.EXE
[WP] DEV_00
6848 K
11060 K
42180 K
42180 K
6
Sum
460128 K
1063904 K
B dbexpbuf[0]: Shm 54: create failed
B ***LOG BBF=> internal error in export/import buffer: object buf init fail [dbexpbuf#4 @ 2611] [dbexpbuf2611 ]
B dbexpbuf: return code (sap_rc): 4
B Buffer 0 will not be available
B Unexpected returncode from db_exp_init(EXP_ATP) : 4
B db_objinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 237]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1656]
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1159]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server bw2003_DEV_00 on host bw2003 (wp 0)
M * ERROR tskh_init: ThIPCInit
M *
M * TIME Sat May 18 00:29:02 2030
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 17
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2328) [dpnttool.c 346]
M SemCleanup: Reset blocking on semaphore (Key:4/Slot:3)
Thanks buddy
waiting... -
IDES ECC60 installation problems
I am having some problems installing IDES ECC60.
It is on X86 IA32 Win Oracle.
Brand new server. Installed Java 1.4.2.09.
Installed Oracle 10.2 successfully, pacthed it.
When running my SAPinst I select central system ABAP only. Didn't change the default parameters.
At the import ABAP step I have joibs that failed (not sure if that is related or not), but then after a while I get the following error:
ERROR 2010-08-26 10:16:31
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log,
import_monitor.log.
ERROR 2010-08-26 10:16:31
FCO-00011 The step runMigrationMonitor with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind
|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|
NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|
NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Here is my log on SAPINST.LOG:
WARNING 2010-08-26 10:16:31
Execution of the command "C:Program FilesJavaj2re1.4.2_09binjava.exe -classpath
migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -
importDirs "D:SAP Downloaded SoftwareNeededIDES SAP
ERP 2005 SR1 Inst.
Export 1 of 27EXP1;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 2 of 27EXP2;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 3 of 27EXP3;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 4 of 27EXP4;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP5;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP6;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP7;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP8;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP9;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP10;D:SAP Downloaded SoftwareNeededIDES SAP ERP 2005 SR1 Inst.
Export 5 of 27EXP11" -installDir "C:Program Filessapinst_instdirERPSYSTEMORACENTRALAS" -
orderBy "" -r3loadExe D:usrsapID6SYSexenucNTI386
R3load.exe -tskFiles yes -extFiles yes -dbCodepage
1100 -jobNum 3 -monitorTimeout 30 -loadArgs " -
stop_on_error" -trace all -sapinst" finished with return code 103. Output:
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Import Monitor jobs: running 1, waiting 11, completed 60, failed 0, total 72.
Import Monitor jobs: running 2, waiting 10, completed 60, failed 0, total 72.
Import Monitor jobs: running 3, waiting 9, completed 60, failed 0, total 72.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 2, waiting 9, completed 60, failed 1, total 72.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 1, waiting 9, completed 60, failed 2, total 72.
Import Monitor jobs: running 2, waiting 8, completed 60, failed 2, total 72.
Import Monitor jobs: running 3, waiting 7, completed 60, failed 2, total 72.
Loading of 'SAPSSEXC_7' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 60, failed 3, total 72.
Import Monitor jobs: running 3, waiting 6, completed 60, failed 3, total 72.
Loading of 'SAPAPPL2_4' import package: ERROR
Import Monitor jobs: running 2, waiting 6, completed 60, failed 4, total 72.
Loading of 'SAPSSEXC_12' import package: ERROR
Import Monitor jobs: running 1, waiting 6, completed 60, failed 5, total 72.
Import Monitor jobs: running 2, waiting 5, completed 60, failed 5, total 72.
Import Monitor jobs: running 3, waiting 4, completed 60, failed 5, total 72.
Loading of 'SAPAPPL2_6' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 60, failed 6, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 60, failed 7, total 72.
Import Monitor jobs: running 2, waiting 3, completed 60, failed 7, total 72.
Import Monitor jobs: running 3, waiting 2, completed 60, failed 7, total 72.
Loading of 'SAPSDIC_1' import package: ERROR
Import Monitor jobs: running 2, waiting 2, completed 60, failed 8, total 72.
Loading of 'SAPAPPL0_7' import package: ERROR
Import Monitor jobs: running 1, waiting 2, completed 60, failed 9, total 72.
Import Monitor jobs: running 2, waiting 1, completed 60, failed 9, total 72.
Loading of 'RSMPTEXTS' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 60, failed 10, total 72.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 60, failed 11, total 72.
Is my import package faulty?
Any help is greatly appreciate it.
Thanks
Leonardo De Araujothe trace file for import_monitor.java.log is shown below.
INFO: 2006-08-25 12:23:24
Import Monitor is started.
CONFIG: 2006-08-25 12:23:24
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 12:23:24
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 12:23:24
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 12:23:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 12:23:24 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 12:23:24
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 12:23:24
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 12:23:24
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 12:23:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2006-08-25 12:23:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSDIC.TSK ORA -l SAPSDIC.log
TRACE: 2006-08-25 12:23:25 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -stop_on_error
INFO: 2006-08-25 12:26:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is successfully completed.
TRACE: 2006-08-25 12:26:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2006-08-25 12:26:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP1\DATA\SAPSSEXC.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSSEXC.TSK ORA -l SAPSSEXC.log
TRACE: 2006-08-25 12:26:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
INFO: 2006-08-25 13:04:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
TRACE: 2006-08-25 13:04:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is started.
TRACE: 2006-08-25 13:04:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL1' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPAPPL1.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPAPPL1.TSK ORA -l SAPAPPL1.log
TRACE: 2006-08-25 13:04:55 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error
INFO: 2006-08-25 13:10:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is successfully completed.
TRACE: 2006-08-25 13:10:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2006-08-25 13:10:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL0' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPAPPL0.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPAPPL0.TSK ORA -l SAPAPPL0.log
TRACE: 2006-08-25 13:10:55 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -stop_on_error
INFO: 2006-08-25 13:21:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
TRACE: 2006-08-25 13:21:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 13:21:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL2' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPAPPL2.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPAPPL2.TSK ORA -l SAPAPPL2.log
TRACE: 2006-08-25 13:21:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 13:28:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:28:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 13:28:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSRC' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPSSRC.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSSRC.TSK ORA -l SAPSSRC.log
TRACE: 2006-08-25 13:28:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 13:29:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:29:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is started.
TRACE: 2006-08-25 13:29:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPPOOL' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPPOOL.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPPOOL.TSK ORA -l SAPPOOL.log
TRACE: 2006-08-25 13:29:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPPOOL' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -l SAPPOOL.log -stop_on_error
ERROR: 2006-08-25 13:30:32 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -l SAPPOOL.log -stop_on_error' exited with return code 2.
For mode details see 'SAPPOOL.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:30:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 13:30:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSPROT' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPSPROT.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSPROT.TSK ORA -l SAPSPROT.log
TRACE: 2006-08-25 13:30:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 13:31:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:31:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is started.
TRACE: 2006-08-25 13:31:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDOCU' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPSDOCU.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSDOCU.TSK ORA -l SAPSDOCU.log
TRACE: 2006-08-25 13:31:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDOCU' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -stop_on_error
INFO: 2006-08-25 13:31:56 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is successfully completed.
TRACE: 2006-08-25 13:32:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is started.
TRACE: 2006-08-25 13:32:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSLEXC' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPSLEXC.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSLEXC.TSK ORA -l SAPSLEXC.log
TRACE: 2006-08-25 13:32:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLEXC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
ERROR: 2006-08-25 13:32:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSLEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:32:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is started.
TRACE: 2006-08-25 13:32:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPCLUST' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPCLUST.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPCLUST.TSK ORA -l SAPCLUST.log
TRACE: 2006-08-25 13:32:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPCLUST' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
ERROR: 2006-08-25 13:33:04 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error' exited with return code 2.
For mode details see 'SAPCLUST.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:33:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is started.
TRACE: 2006-08-25 13:33:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSLOAD' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPSLOAD.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPSLOAD.TSK ORA -l SAPSLOAD.log
TRACE: 2006-08-25 13:33:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLOAD' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -stop_on_error
INFO: 2006-08-25 13:33:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is successfully completed.
TRACE: 2006-08-25 13:33:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is started.
TRACE: 2006-08-25 13:33:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDDIM' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP3\DATA\SAPDDIM.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPDDIM.TSK ORA -l SAPDDIM.log
TRACE: 2006-08-25 13:33:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDDIM' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -stop_on_error
INFO: 2006-08-25 13:33:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is successfully completed.
TRACE: 2006-08-25 13:34:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is started.
TRACE: 2006-08-25 13:34:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDFACT' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP3\DATA\SAPDFACT.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPDFACT.TSK ORA -l SAPDFACT.log
TRACE: 2006-08-25 13:34:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDFACT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
INFO: 2006-08-25 13:34:29 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is successfully completed.
TRACE: 2006-08-25 13:34:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2006-08-25 13:34:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDODS' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP3\DATA\SAPDODS.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPDODS.TSK ORA -l SAPDODS.log
TRACE: 2006-08-25 13:34:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -stop_on_error
INFO: 2006-08-25 13:35:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is successfully completed.
TRACE: 2006-08-25 13:35:24 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is started.
TRACE: 2006-08-25 13:35:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPUSER' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP2\DATA\SAPUSER.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAPUSER.TSK ORA -l SAPUSER.log
TRACE: 2006-08-25 13:35:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPUSER' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -stop_on_error
INFO: 2006-08-25 13:35:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is successfully completed.
TRACE: 2006-08-25 13:35:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is started.
TRACE: 2006-08-25 13:35:54 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAP0000' import package:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -ctf I E:\dumps\Exp\EXP3\DATA\SAP0000.STR "C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL" SAP0000.TSK ORA -l SAP0000.log -o D
TRACE: 2006-08-25 13:35:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAP0000' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
INFO: 2006-08-25 13:35:59 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
WARNING: 2006-08-25 13:36:24
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 13:36:24
6 error(s) during processing of packages.
INFO: 2006-08-25 13:36:24
Import Monitor is stopped.
INFO: 2006-08-25 13:41:56
Import Monitor is started.
CONFIG: 2006-08-25 13:41:56
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 13:41:56
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 13:41:57
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 13:41:57 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 13:41:57 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 13:41:57
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 13:41:57
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 13:41:57
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 13:41:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 13:41:57 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 13:42:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:42:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 13:42:27 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 13:42:33 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:42:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is started.
TRACE: 2006-08-25 13:42:57 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPPOOL' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -l SAPPOOL.log -stop_on_error
INFO: 2006-08-25 13:44:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is successfully completed.
TRACE: 2006-08-25 13:44:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 13:44:57 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 13:45:01 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:45:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is started.
TRACE: 2006-08-25 13:45:27 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLEXC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
INFO: 2006-08-25 13:45:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is successfully completed.
TRACE: 2006-08-25 13:45:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is started.
TRACE: 2006-08-25 13:45:57 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPCLUST' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -stop_on_error
INFO: 2006-08-25 13:46:19 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is successfully completed.
WARNING: 2006-08-25 13:46:27
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 13:46:27
3 error(s) during processing of packages.
INFO: 2006-08-25 13:46:27
Import Monitor is stopped.
INFO: 2006-08-25 13:57:41
Import Monitor is started.
CONFIG: 2006-08-25 13:57:41
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 13:57:41
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 13:57:41
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 13:57:41 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 13:57:41 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 13:57:41
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 13:57:41
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 13:57:41
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 13:57:41 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 13:57:41 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 13:58:07 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:58:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 13:58:11 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 13:58:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 13:58:41 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 13:58:41 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 13:58:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2006-08-25 13:59:11
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 13:59:11
3 error(s) during processing of packages.
INFO: 2006-08-25 13:59:11
Import Monitor is stopped.
INFO: 2006-08-25 14:08:53
Import Monitor is started.
CONFIG: 2006-08-25 14:08:53
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 14:08:53
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 14:08:53
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 14:08:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 14:08:53 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 14:08:53
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 14:08:54
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 14:08:54
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 14:08:54 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 14:08:54 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 14:09:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 14:09:23 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 14:09:23 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 14:09:28 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 14:09:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 14:09:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 14:09:57 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2006-08-25 14:10:23
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 14:10:23
3 error(s) during processing of packages.
INFO: 2006-08-25 14:10:23
Import Monitor is stopped.
INFO: 2006-08-25 15:10:41
Import Monitor is started.
CONFIG: 2006-08-25 15:10:41
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 15:10:41
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 15:10:41
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 15:10:41 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 15:10:41 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 15:10:41
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 15:10:41
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 15:10:41
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 15:10:41 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 15:10:41 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 15:10:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 15:11:11 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 15:11:11 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 15:11:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 15:11:41 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 15:11:41 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 15:11:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2006-08-25 15:12:11
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 15:12:11
3 error(s) during processing of packages.
INFO: 2006-08-25 15:12:11
Import Monitor is stopped.
INFO: 2006-08-25 15:21:47
Import Monitor is started.
CONFIG: 2006-08-25 15:21:47
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 15:21:47
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 15:21:47
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 15:21:47 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 15:21:47 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 15:21:47
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 15:21:47
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 15:21:47
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 15:21:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 15:21:47 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 15:21:52 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 15:22:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 15:22:17 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 15:22:21 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 15:22:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 15:22:47 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 15:22:52 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2006-08-25 15:23:17
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 15:23:17
3 error(s) during processing of packages.
INFO: 2006-08-25 15:23:17
Import Monitor is stopped.
INFO: 2006-08-25 15:43:47
Import Monitor is started.
CONFIG: 2006-08-25 15:43:47
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 15:43:47
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 15:43:47
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 15:43:47 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 15:43:47 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 15:43:47
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 15:43:47
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 15:43:47
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 15:43:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 15:43:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 15:43:52 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 15:44:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2006-08-25 15:44:17 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error
ERROR: 2006-08-25 15:44:21 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSRC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
TRACE: 2006-08-25 15:44:47 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2006-08-25 15:44:47 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error
ERROR: 2006-08-25 15:44:51 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSPROT.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2006-08-25 15:45:17
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2006-08-25 15:45:17
3 error(s) during processing of packages.
INFO: 2006-08-25 15:45:17
Import Monitor is stopped.
INFO: 2006-08-25 15:46:22
Import Monitor is started.
CONFIG: 2006-08-25 15:46:22
Application options:
dbCodepage=4103
dbType=ORA
extFiles=yes
importDirs=E:\dumps\Exp\EXP1;E:\dumps\Exp\EXP2;E:\dumps\Exp\EXP3
installDir=C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS
jobNum=1
loadArgs= -stop_on_error
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2006-08-25 15:46:22
List of packages with table structure: 'SAP0000'.
CONFIG: 2006-08-25 15:46:22
List of packages with views: 'SAPVIEW'.
TRACE: 2006-08-25 15:46:22 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is started.
INFO: 2006-08-25 15:46:22 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\NW04S\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2006-08-25 15:46:22
Data codepage 1100 is determined using TOC file 'E:\dumps\Exp\EXP1\DATA\SAPSSEXC.TOC' for package 'SAPSSEXC'.
INFO: 2006-08-25 15:46:22
Version table 'SVERS' is found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2006-08-25 15:46:22
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\dumps\Exp\EXP3\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2006-08-25 15:46:23 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2006-08-25 15:46:23 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error
ERROR: 2006-08-25 15:46:27 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is interrupted with R3load error.
Process 'E:\usr\sap\I51\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL2.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sappa -
Can't get IDE drive to work with K8N NEO2
I built my computer two months ago. The only hard drive I installed was a Samsung 160GB SATA. The Windows XP installation was flawless and the system has worked perfectly ever since.
This past week I decided to install my old Western Digital IDE hard drive. I connected it to PATA port 1 on the motherboard. It's jumpered as a Primary device and connected to the primary port on the IDE cable.
The problem is that when I boot the computer with the IDE drive connected it will hang on the gray Platinum screen for around 5 minutes. If I hit DEL and enter BIOS after 5 minutes I can see that the drive is detected and the boot order already was set for the SATA drive first and the IDE drive second. Then if I reboot it hangs on the Platinum screen again for five minutes. When it finally clears that I get messages indicating that no boot device is available. If I shut down, disconnect the IDE drive, and reboot with only the SATA drive connected it boots flawlessly.
I checked my device manager and see that the nvidia nforce3 250 Parallel ATA controller and Serial ATA controller drivers are installed.
Is there anything else I can check or do to get the computer to boot with an IDE drive connected?
Thanks!WD drives are special compared to others .
If they are alone on the ide channel they shall not be jumpered as master .
This is only when it is sharing the channel with another ide/atapi device .
Instead the jumper shall be removed , they call it single drive jumpering (SD).
And the reason why bios get hung is :
It finds a master jumpered drive , and since it does it will try to detect the slave
but there isn't one . -
Fusion middleware OID cluster installation with weblogic domain
Hi,
I am trying to install/configure fusion middleware OID 11.1.1.2 cluster with two nodes.
Installed Databse, Weblogic, Ran RCU for schema creation.
I installed OID by selecting Create new Domain
selected clustered check box while installtion.
Selected OID and DIP for installation and configuration.
Create domain was sucessfull.
Deploy oracle directory server was Sucessfull.
Got Error when deploying Directory Integration platform.
Error: An internal operation has failed error in configuring DIP-00004 error in connecting to oracle internet directory server.
I thing apply patch will solve this issue.
I am able to login to weblogic
Admin Server, Node manager and manager server are in running state.
I am able launch enterprise manager.
OID1 is up.
I am not able to launch /odsm. any idea?? (tried with different browsers its the same)
I am applying patch now..hope solves the issue.
So now OID is deployed on one manager server and i have to add one more server in this cluster.
I am thinking to do basic weblogic installation on other cluster server then copy the domain from machine1 to machine2.
Not sure how to setup the other managed server with machine 2 details??
Please correct me if i followed any wrong step.
I need steps for Clustering.
Any idea please help??when click on Next button it says "Weblogic server must already be installed".Please see if ("TypeError: unsupported operand type(s) for +: 'NoneType' and 'str'" Signaled When Creating ODI Domain On WebLogic Server [ID 1220075.1]) helps.
In this configured with EBS instance? If yes, what is the document you have followed to configure it?
Thanks,
Hussein -
Can Packagemaker create installer with content files outside the bundle?
I'm trying to create an installer with Packagemaker, but the content files need to be outside the final bundle because they're shared with a Windows installer.
I thought I could create a symbolic link to the external folder, but instead of linking from the installer, it copied the files into the bundle. Any idea how to do this, or if it's even possible? I need to be able to do this on 10.3+, if that's relevant.
(I can give a more specific scenario if this isn't clear enough)
Thanks!zekel wrote:
The main issue I'd be worried about is that the external files (which are quite large) won't have the appropriate progress bar. The external files are around 1GB, while the internal files are in the 30MB range.
How about installing a secondary installer with progress bar that copies these files from the correct location. Your postflight script can just kick off the newly installed file copier.
How's this sound for a hack...
Have a launcher script copy the installer to /tmp, then modify the package to point my files. (I'm installing from read-only media.) It would then open the modified installer which would pull my files from the DVD. This would probably work better (read: at all) if the files aren't compressed inside the package. Do you know if that's an option?
No, sorry. The internals of a package are quite specific. You need PackageMaker itself to build them.
Things like the receipts are non-essential at this point, only because if I can't get this to work then we will continue to use our terrible installer which leaves none of those things. Those shouldn't be too much trouble if I can get the rest to work.
There are some 3rd party installers like Installer VISE. The sad part is that they tend to make the MacOS X Installer look good.
If the guy responsible for that is interested I'll show him Inno Setup, but we have a working Windows installer, so he probably won't want to mess with it.
I agree, but tell him about it anyway. The next time you have to build a Windows installer, he could use Inno Setup and get it done in a couple of hours and then have time to help with the mess that is software deployment on MacOS X. -
Building installer with 8.5
I have built an application with Labview 8.5 and am trying to build an installer with the 8.5 runtime engine for a stand alone program. However the exe builds okay, but when I try to build the installer I get a message saying some components need to be load from real-time module 8.6.1 and it asks for the directory of the nist.id. I am not using any real time in my application. It seems as though this started popping up after I installed Labview 8.6. Anyone have any Ideas.
Regards,
WadeThanks for the Reply and link. I just placed the Labview disk in the disk drive and selected that directory so the installer builder could locate the file it was looking for, and then cached it. However I am curious as to why all of the sudden it needs the real time module 8.6.1. If my only additional installer is RT engine 8.5. Before I upgrade to NI DAQ 8.8 that came with LV 8.6 I hadn't gotten this request for the RT Module components while only requesting the RT engine for an additional installer. Anyways its no big deal now that I have the file cached. It doesn't ask anymore. Thanks.
Wade -
Problem in building an Eclipse installation with oomph
Hallo,
I am setting up an Eclipse distribution with several plugins needed to have a proper IDE for an Eclipse Project (GEF).
When adding the plugins to Eclipse everything is Ok, until I install the Oomph Version Management Tool plugin.
After installing the Oomph VMT Plugin, from the next startup I see the below error:
Plugins contained in the Eclipse distribution.
As specified in the GEF contributor guide, the GEF-IDE consists of
Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
Oomph Version Management Tool, from Oomph update site
After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
An internal error occurred during: "Setup check".
USER_HOME
I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see bug 473599.
Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core , but only for a small "delta"
I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the bug 473599.
So, I have two questions:
how to perform a Complete IDE Update ?
how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
Thank you very much for the time you're spending on my question.
I hope my question does not seem impolite or excessively complex.
Regards.Hi Patrik,
The p2f file that you mentioned in https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599 seems totally useless to me. It
locks in specific versions of the listed IUs, no matter whether the identified repositories will provide those versions
in the future or not. For example:
<iu id='org.eclipse.oomph.setup.feature.group' name='Oomph Setup' version='1.2.0.v20150720-0925'>
<repositories size='2'>
<repository location='http://download.eclipse.org/oomph/updates'/>
<repository location='http://download.eclipse.org/oomph/updates/latest'/>
</repositories>
</iu>
A P2Director task in an Oomph setup model for GEF seems like a better alternative.
More comments below...
Cheers
/Eike
http://www.esc-net.de
http://thegordian.blogspot.com
http://twitter.com/eikestepper
Am 27.07.2015 um 22:44 schrieb Patrik Suzzi:
> Hallo,
>
> I am trying to build a complex eclipse installation needed for development of the Eclipse GEF project.
>
>
>
> As specified in the GEF contributor guide, the GEF-IDE consists of
>
> Eclipse IDE for committers Mars R as base eclipse ( in my case is win32)
> API Tools Execution Environment Description v 1.0.1 from http://download.eclipse.org/releases/mars update site
> e(fx)clipse IDE - PDE version .2.0.0, from http://download.eclipse.org/efxclipse/updates-released/2.0.0/site/ update site
> m2e - Maven Integration for Eclipse - version 1.6.0, from http://download.eclipse.org/releases/mars update site
> Xtext Complete SDK - version 2.8.3, from http://download.eclipse.org/releases/mars update site
> Oomph Version Management Tool, from http://download.eclipse.org/oomph/updates
>
>
> During the installation everything is Ok, until I install the last plugin: the Oomph Version Management Tool.
>
> After installing the Oomph Version Management Tool plug-in, at the next Eclipse Startup I see the following error:
>
> An internal error occurred during: "Setup check".
> USER_HOME
>
>
>
> I was actually thinking my install was ok, but in bugzilla, I got that I did an "inconsistent installation" - see https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
>
> Indeed, I checked in the About eclipse features for the Oomph, and I saw the Version Management Tool version is not matching with Oomph Setup Core .
>
>
>
> I tried to do an Update of the IDE using the Help > Check for updates, but I realized it is not a Complete IDE update , as suggested in the https://bugs.eclipse.org/bugs/show_bug.cgi?id=473599.
>
> So, I have two questions:
>
>
> how to perform a Complete IDE Update ?
I'm not 100% sure but I think you can't easily get out of this inconsistent state because the plugins that would do that
for you are also impacted. I would recommend that you create a new installation with Oomph's Eclipse Installer.
> how can I make a consistent installation, by assembling the five plugins above, including the Oomph version management ?
I would suggest that you put pressure on the GEF people to provide a GEF project setup model, so that you can just add
it to your install. -
Problem Installing IDES 4.7 SR1 with Oracle 9.2.0.1.0
Hello everyone,
I have problems installing SAP IDES 4.7 SR1 with Oracle 9.2.0.1.0 on my desktop pc..I got problems in the very begining when using Oracle Universal installer:
--When I tryied to install Oracle(using Oracle Installer) for the first time I received error - pop up box at 16% with some file 'oraocci9.lib'. I was able to find the file under directory C:\oracle\ora92\oci
lib\msvc but still I wasnt able to continue for some reason..
-- Now when I try to reinstall Oracle from scretch I have even more errors : When I chose 'select the a databse suited to your needs' and chose General Purpose
I got the message:
..'The folowing running service need to be shutdown before continuing : OracleMTSREcoveryService..'
--Oracle universal Installer doesn't show that I got something to uninstall - but still I got this MTS running?Can someone tell me how to uninstall everything and start from scratch again..
If anyone got idea - please help , or BEST will be if someone got <b>THE DETAILED 4.7 IDES with Oracle 9i INSTALL PROCEDURE PLEASE EMAIL</b> me at: [email protected]
Highly appreciate any help!!
Thanks ,
Bob
P.S I have done all requitements :
OS Windows 2003 server installed on C partition Oracle Home resides on C and created 68 GB D partition for Oracle database files and Sap..Hello Bobi,
Install the Oracle first (choose without database option) then install IDES.
Regards
Kariyath -
Sidecar installation with Adobe AIR 1.5.3
Hi all,
I'm having some difficulty with a sidecar installation with AIR 1.5.3. I've followed the steps in the runtime redistribution pdf (especially the section "Using the bundled runtime installer") but no luck yet. Here's my scenario:
1. Building the application with the 3.4 flex sdk (the distribution says that Adobe AIR 1.5.2 is included with the 3.4 version of the flex sdk)
2. Downloaded the AIR_Mac_installer_files.dmg from http://www.adobe.com/products/air/runtime_distribution3.html.
3. Renamed the installer to match my application's name.
4. Created a .airinstall.cfg file which included my application's name.
5. Double clicked on the installer file, but I don't get anything. No prompt for installing the AIR application.
This is running on MAC OSX 10.5.7. My "bundled runtime installer directory" looks like:
-rw-r--r-- 1 seanoshea staff 16 Dec 14 18:26 .airinstall.cfg
drwxr-xr-x 3 seanoshea staff 102 Dec 14 17:38 Eye-Fi-Center Installer.app
-rw-r--r-- 1 seanoshea staff 3171146 Dec 14 18:21 Eye-Fi-Center.air
Any ideas on where I'm going wrong here?
SeanHi there Ted,
In summary, there are three scenarios which I'm testing on each platform:
1. Installation of the application where the user does not have an AIR runtime previously installed.
2. Installation of the application where the user has an AIR runtime installed.
3. Installation of the application where the user has an AIR runtime installed and has a version of our application installed too (basically this is the update scenario)
I have a bootstrapper application which will be invoking the installer, so I understand I do not need to rename the Adobe AIR installer .exes or .app files.
On Windows XP, the command I'm invoking is shown in Picture 4.png. Basically, I'm invoking the AdobeAIRInstaller.exe file, passing a -silent flag and the name of the application I'm trying to install. This command works fine for scenarios 1 and 2 above. However, if I use this command when I try to update an existing application, I get this error:
Starting silent x1 install from file:///C:/Documents%20and%20Settings/Administrator/Desktop/air/Eye-Fi%20Center.air
UI SWF load is complete
stateRunningAppInstaller: appinstaller -runtime C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\AIR1C.tmp -silent -withRuntime -url file:///C:/Documents%20and%20Settings/Administrator/Desktop/air/Eye-Fi%20Center.air
App installer failed; exit code 9
begin quitting
The permissions problem I was running into in my previous post on Windows Vista is a false alarm. I wasn't running the cmd application with admin rights (despite the fact that I was logged into the OS as an admin). Running cmd.exe as an admin solved that issue.
So, I'm only stuck on the update scenario. Same thing happens on mac when I try to install on a system where Adobe AIR is already installed and the application is installed too. The .airinstall.log file shows:
Starting silent x1 install from file:///Users/seanoshea/Downloads/center-mac/Eye-Fi%20Center.air
UI SWF load is complete
stateRunningAppInstaller: appinstaller -runtime "/Users/seanoshea/Downloads/center-mac/Adobe AIR Installer.app/Contents/Frameworks" -silent -withRuntime -url file:///Users/seanoshea/Downloads/center-mac/Eye-Fi%20Center.air
App installer failed; exit code 9
begin quitting
The .airappinstall.log shows:
Starting silent app install of file:///Users/seanoshea/Downloads/center-mac/Eye-Fi%20Center.air
UI SWF load is complete
UI initialized
Unpackaging to /private/var/folders/ji/jiiah6G5GYKfLcqFG7+K0k+++TI/TemporaryItems/FlashTmp0
unpackaging is complete
application is bound to side-by-side version 1.0
application is bound to this version of the runtime
app id fi.eye.Eye-Fi-Center
pub id E430518E652B889A80EC0E8A6E532C09FF36DF62.1
Application located at /Applications/Eye-Fi
bad configuration for silent install or update
starting cleanup of temporary files
application installer exiting
Let me know if you need any additional information.
Thanks
Sean -
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtikHi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM -
IDES 6.0sr3 installation error, on windows server datacenter/oracle
Hello buddies,
I'm installing IDES6 SR3 on windows server datacenter edition, oracle10.0.2.
when I go through sapinst steps till after specify export source file location, it jumps to 'Orale>data system' screen where I found the instance RAM is 1007, then go to next, an error msg pops up saying 'Mapping of tables/objects to tablespace information is missing. DIAGNOSIS: could not find file C:\usr\sap\expdir\DB/ORA/DBSIZE.XML. SOLUTION: Specify the file in the installation output directory.'
now I could not proceed the installation. Anyone could help?
MyronHi Markus,
Thanks for your kind reply. My memory is 4GB but my host OS is winXP so the max. useable memory is only 3.25GB. I'm intalling IDES on virtual machine with Windows server datacenter 2003 64bit as OS and Oracle 10 as db. The memory for virtual machine is set to 2.2GB.
Best Regards,
Myron -
Installation with LUKS encryption--ok to grub, then black screen
I'm trying to install ArchLinux onto an existing Luks encrypted HDD, formerly dual boot with Fedora 17.
First,I left the Windows partition unchanged and erased the root partition. Then I booted to the ArchLinux, mounted and decrypted the LVM encrypted volume group partitions and followed along with the Beginner's Guide Installation Instructions. This progressed without a hitch; near as I can tell. I can boot to grub select kernel interface, but no further.
So I forgot something...the encrypted volume. I found the archLinux page dm-crypt with LUKS and tried my best to follow along encouraged by the first line, "The installation of a LUKS-encrypted system is largely the same as installing an unencrypted system."
And that's where I stand. I edited the grub.cfg to boot to run level 3, but the kernel doesn't seem to load at all and never starts to give me the chance to enter the password. So now I'm not sure if its the LUKS encryption after all. (maybe its my _next_ problem)
Any ideas?
Last edited by xtian (2013-09-17 22:03:48)Sure, here's the layout,
# lsblk -fa
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 vfat xxxx-xxxx
├─sda2 ext4 xxxxxxxxxxxxxxxxxxxxx /boot
└─sda3 crypto_L xxxxxxxxxxxxxxxxxxxx
└─luks-93xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (dm-0) LVM2_mem xxxxxxxxxxxxxxxxxxxxxxx
├─cryptVG-root (dm-1) ext4 xxxxxxxxxxxxxxxxxxxxxxxxxxxx /
├─cryptVG-swap (dm-2) swap xxxxxxxxxxxxxxxxxxxxxxxxxxxx [SWAP]
├─cryptVG-home (dm-3) ext4 home xxxxxxxxxxxxxxxxxxxxxxxxxxxx /home
└─cryptVG-local (dm-4) ext4 local xxxxxxxxxxxxxxxxxxxxxxxxxxxx /usr/local
I left sda1 alone. Reinstalled on sda2 (/boot) and sda3 (cryptVG-root). I also remade swap. I didn't see an opportunity to set /usr/local, so I may simply free up this space after copying the data. But for home I set up a sub directory for the new install and left the old user in place (something I've been wanting to accomplish for some time as anaconda is not so nice to old user files). -
Sao ides 4.7 installation guide
Hi,
i am trying to install SAP ides 4.7 on my computer
with oracle 9.2.1
i need sap ides 4.7 INSTALLATION GUIDE
can someone please email it to me...
[email protected],gyaraa_112yahoo.com
thnxcheck it
-
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm
Maybe you are looking for
-
Error message while opening cs3
I cannot get my photoshop cs3 extended to fully open on my desktop. error message pops up saying photoshop has stopped working. the credits run though. and it looks as though it is going to open. then stops:) Any advice would be greatly appreciated!
-
Acrobat 7.0.0から7.1.0へupdateするとエラー発生
Acrobat 7 StdをインストールしてUpdateで7.0.0→7.1.0にしてAcrobat7を起動すると."Annots.Api""Updater.Api"の2つに対して「プラグイン「An nots.api」の読み込み中にエラーが発生しました.プラグインを初期化できません.」と2回エラーメッセージが表示され「OK」を押下すると.そのままAcrobat 7が起動せずに落ちてしまいます. 同機種の別PC1台でもテストしたところ.やはり7.0.0だと正常起動し."7.1.0"へupdateす
-
Problem exporting PDF document
I have a form implemented as a PDF form and would like to add a workflow step to my process so that the PDF form can be sent as an email attachment. Based on a previous posting, it seems that I need to use the RepositoryServices Read Resource Content
-
What a basis person can do for MSS and ESS on NW04s (EP7)?
Is it to add the business packages only. Please advise. Thanks!
-
this is really odd. and i have reverted to 10.4.8 until i can find a solution. i have two different fw400/usb20 external cases. inside each is a 200gb ata hd. now before 10.4.9, when i ejected the disks from the desktop, they would not only eject, bu