Ides system
Can one do the excercises in the SAP Training Manuals in a IDES system?
Will all the ready-made test data be there as you follow same as the instructions in training manuals?
Thanks
Hi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny
Similar Messages
-
Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
AkshayHi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny -
SAPUSER is locked in ECC 6.0 IDES SYSTEM
Hi Everyone,
I installed ECC 6.0 IDES SYSTEM, but the username SAPUSER is locked, I tried with various passwords but was not successfull. Is there any other way I can logon into it with this username or any other super username. Please help.
thanks,
Prashant.Hi techno guys,
I have deleted the usr02 from sql table, and managed to logged in by Sap* and Password pass,
But when I try to do something I am getting a sql error message that I do not have access or something like that,
From SU01 also I couldnt create a username or unlock because same error page is coming..
plz tell me do i need to do something after deleting that usr02 row from the table?
plz advice me .. thanks -
Unable to login to IDES system after client copy
Hi guys
the IDES system which i was using was working fine. I was trying CLient copy today morning and was trying to create a new client in the IDES system.
The client copy failed due to a shortdump in the process.
Now i am unable to login to the client 800 as it says the user password is incorrect.
How do i get back my 800 client? is there a way to get back the client 800 or do i have any other optionn to re-set the password without logging on to the client?
i do have access to client 000.
please guide me what should i do? i need the client 800 back and should be able to login too.hi,
i cannot login to client 800. I need to login first in the client 800 to go to su01 to re-set the password.
I want to login to client 800 which i am unable to do as a result of client copy. So the other option i am looking at is reset the password from client 000.
anyways thanks for your inputs
Hi guys,
any idea?
Edited by: Workflow learner on Jun 2, 2008 10:48 AM -
TIME_OUT in VK13 / VK33 on IDES system
We are receiving the following timeout when running VK13 and VK33 on our IDES system. This is standard code, and there is no notes regarding this TIME_OUT.
The Termination occurred in the ABAP program "SAPLV12A" - i
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
The whole ST22 dump is as follows:
Runtime Errors TIME_OUT
Date and Time 18.08.2010 19:35:25
Short text
Time limit exceeded.
What happened?
Error analysis
If you have access to SAP Notes, carry out a search with the following
keywords:
"TIME_OUT" " "
"SAPLV12A" or "LV12AU07"
"ACCESS_REPORT_GENERATE"
System environment
SAP-Release 700
Application server... "sap6ides"
Network address...... "10.3.3.125"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 3
Shortdump setting.... "full"
Database server... "sapC10ides"
Database type..... "ADABAS D"
Database name..... "C10"
Database user ID.. "SAPC10"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 22 2007 00:12:17"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.035 CL 139084 "
Patch level. 111
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 2342912
MM Used. 4880016
MM Free. 3496816
User and Transaction
Client.............. 800
User................ "MEASLE"
Language key........ "E"
Transaction......... "VK13 "
Program............. "SAPLV12A"
Screen.............. "SAPMV13A 0100"
Screen line......... 24
Information on where terminated
Termination occurred in the ABAP program "SAPLV12A" - in
"ACCESS_REPORT_GENERATE".
The main program was "SAPMV13A ".
In the source code you have the termination point in line 177
of the (Include) program "LV12AU07".
Source Code Extract
Line SourceCde
147 dff_desc_ref_field = dd08v_tab-reffldname
148 EXCEPTIONS
149 OTHERS = 1.
150 IF sy-subrc NE 0.
151 CLEAR: dd08v_tab-txttabname,
152 dd08v_tab-reffldname,
153 dd08v_tab-txtfldname.
154 ENDIF.
155 * und aufnehmen
156 READ TABLE dd08v_tab WITH KEY tabname = dd08v_tab-tabname
157 fieldname = dd08v_tab-fieldname
158 TRANSPORTING NO FIELDS.
159 IF sy-subrc EQ 0.
160 MODIFY dd08v_tab INDEX sy-tabix
161 TRANSPORTING txttabname reffldname txtfldname
162 arbgb msgnr.
163 ELSE.
164 APPEND dd08v_tab.
165 ENDIF.
166 LOOP AT dd05m_tab WHERE
167 tabname = t681-kotab AND fieldname = xt681e_tab-sefeld.
168
169 READ TABLE dd03v_tab INDEX dd05m_tab-primpos.
170 IF sy-subrc = 0 AND dd03v_tab-datatype NE 'CLNT'.
171 MOVE-CORRESPONDING dd05m_tab TO dd05v_sel.
172 dd05v_sel-forfldname = dd03v_tab-fieldname.
173 IF dd08v_tab-reffldname IS INITIAL.
174 dd05v_sel-reffldname = dd03v_tab-fieldname.
175 ELSE.
176 TABLES dd05p.
>>>>> SELECT * FROM dd05p
178 WHERE tabname = dd08v_tab-txttabname
179 AND fieldname = dd08v_tab-reffldname
180 AND checktable = dd08v_tab-checktable
181 AND checkfield = dd03v_tab-fieldname.
182 dd05v_sel-reffldname = dd05p-forkey.
183 EXIT.
184 ENDSELECT.
185 IF sy-subrc = 4.
186 dd05v_sel-reffldname = dd08v_tab-reffldname.
187 ENDIF.
188 ENDIF.
189 APPEND dd05v_sel.
190 ENDIF.
191 ENDLOOP.
192 ENDIF.
193 IF NOT dd08v_tab-txttabname IS INITIAL AND
194 NOT dd08v_tab-txtfldname IS INITIAL.
195 * Fremdtabelle lesen (Text)
196 CALL FUNCTION 'RV_TABLE_READ'
2
0
0
0> Database version. "SQLDBC 7.6.0.035 CL 139084 "
You seem to use a VERY OLD MaxDB database software.
I suggest:
- Update your MaxDB to a recent release, the version you use is very old.
- Update your database statistics to make sure the access paths for the data is optimal
- check the database parameters against Note 814704 - MaxDB Version 7.6 parameter settings for OLTP/BW
If you still use the default settings that came with the installation then it's rather obvious why your system is so slow.
Markus -
Implementing UCES in SAP ISU- IDES system
Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
RajaHi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful. -
Hi,
Is it possible to configure SSO (single signon) between IDES system to SAP EP system.
ThankuI can't find a reason why not. did you tried it?
Regards
Juan -
Configure Web Services in a SAP-IDES-System?
Hello,
I have access to a SAP-frontend on a SAP-IDES-System and now Iu2019d like to configure two Web Services in SAP. I think I can do this configuration with SPRO, but I donu2019t really know how and where.
Is there a good documentation about Web Services in SAP IDES?
Thanks a lot!Hi,
Have a look at below link.
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/57/07813ee3d32b44e10000000a114084/content.htm
I sure it will help you out
Rgds
Radhakrishna D S -
Regarding access key for modify predifined fm in SAP IDES System
hai to all,
How can i find
access key for modify predifined fm in SAP IDES System
i have sap 4.7 dump(IDES)
please give reply asap.
thanks in advance,
regards,
surya.Hi Chandran,
Thank you for the reply,
how can i access this site, its asking username password,
i didn't have both of these and even i'm unable to register also.
how can i access.
please respond
regards,
surya. -
Company data missed in SAP IDES system
Hi friends,
In our SAP IDES ECC 6.0 EHP 5 system some data had missed(some plants had missed) in 800 client, I checked 000 client here also no data..we don't have any backup. If I download the IDES from market place, then is it possible to get entire data of 000 & 800 clients. Could you please any one help me how to get our data back..
Thanks in Advance
Regards,
Venkatesh BHi,
Thanks for your replay.
Finallyw e decided to reinstall IDES.. now my doubt is, what is the difference between sap IDES system installation and normal sap installation..
and what softwares need to dowload for ides..
and if any one have full ides installation guide please share me..
Regards,
Venkat -
Activation of Discrete Industries and Mill Products in existing IDES system
Dear Sir,
I want to activate Discrete Industries and Mill Products in my existing IDES system (EHP4 FOR SAP ERP 6.0 / NW7.01)
Can some one help me with what steps i need to follow.
Also does it will effect the existing data in IDES....?
Thanks in advance .
RegardsHi Sunnny,
Thanks for your reply.
as i checked in IDES , facility to activate the addtional packages are there.
with transaction SFW5, i can select the required package and activate it.
but during this process system is giving some warning,
*Note, that not all Business Function Sets or Business Functions provided with SAP ECC 6.0,might be covered by the respective customers' license and maintenance agreement. Use of and access to said software components provided with SAP ECC 6.0 may be subject to additional fees and conditions as stated in SAP's then current list of prices and conditions.
Caution: When you activate an industry solution, this results on the following restrictions on your system. Note that you cannot generally combine one industry solution with other industry solutions or add-ons. Furthermore, an activated industry solution cannot be deactivated. The release strategy note for the desired industry solution can be found in note 838003. The release strategy note contains a reference to the installation note. Read the note on installing/activating the industry solution before beginning activation*
so i want to know what will happen if i click I agree for this warning message.
just by following this process its possible to activate the required bussiness function...?
Thanks
Regards -
CL_ABAP_DATFM methods are not working in IDES system
Hi Experts,
i am trying to execute some date related methods, here example the method conv_date_ext_to_int which converts external date format to internal format.
this method is working properly in the client systems other than IDES system(client:800) , but not showing the class and methods in IDES system,
so i just want to know why it is not showing and working in IDES system, please reply me.
Thanks & Regards,
Sridhar AllenkiI will say it again - Roles in ABAP system appear as groups in portal.
Now, the task you are probably missing is to assign the portal role to the appropriate groups (ABAP roles) in your portal.
In your production portal - check the Portal Role to group (ABAP role) assignment and do the same in your DEV system.
You can go to user administration in portal and search for the group and look for assigned roles.
Thanks,
Shanti -
Is any document about GRC or IDES system can be located?
Hi expert,
Can you please tell me how can I access the IDES system of GRC?
Where can I locate the help document of GRC as access to the help portal of SAP?
Thanks.Documentation on Trade Compliance (Global Trade Services) and Environmental Compliance (EH&S) is available on http://help.sap.com. The user and installation guides for GRC Access Control and Process Control are currently accessible together with the software download (requires a software license). We'll soon have that documentation on http://help.sap.com.
All compliance software is available for demonstration, some of it on IDES systems (trade compliance, environmental compliance), some on dedicated demo servers (access control, process control). -
No Demo Management Cockpits in IDES system
Dear expert,
we installed IDES system for BW/SEM. In Management Cockpit design, we can see manay installed demo measures in Measure Display. However, in Management Cockpit Display, we can't see any installed management cockpits but a blank list. Someone can tell me why there is no demo management cockpit installed?
Thanks in advance.
Jin MingThe user is a manager so assigned the role SAP_MANAGER_MSS_NWBC_3 . The substitution actually exist and i see it on the main page as shown above but wheni click on the Substitution overview i get the error message.
I have followed the customising above and performed all steps but I still get the error.
I am using NWBC
Moderator Spotlight - Siddharth Rajora what else should i check? -
Is there an IDES system of "Access Enforcer" internally at SAP?
Hi expert,
Is there an IDES system of "Access Enforcer" in SAP so that we can access it internally from SAP network?
Thanks.Very well.
<b>This information is only applicable within SAP's corporate network.</b>
Access Controls 5.1 - compliant user provisioning (Virsa Access Enforcer for SAP)
http://idphl930.phl.sap.corp:50000/AE/index.jsp
ERP Backend: Application Server: idphl932.phl.sap.corp, System Number: 50, system ID: G13, Client: 870
Updated Demo Scripts are located here:
Rsophltrndb\FEPublic\Public\GRC_Workshop\DemoScripts
Maybe you are looking for
-
We are trying to setup a dashboard to show data from some webservice. The webservice returns data in xml format which does not meet the requirements of the obiee xml gateway component. So we created a cgi app that preprocesses the xml file returned b
-
Custom Script using Classifications
Hi. I am wondering if it is possible and how I would go about using custom scripts to use classifications to display particular things. This is the goal: To classify events (back end) and then based on the classification of an event, on the detail pa
-
Better To Upgrade To 10.4 or 10.3 on eMac?
I am going to be upgrading my 800 mhz. / 1 GB RAM eMac from OS 10.2.8 to either 10.4 or 10.4. Any good suggestions as to which OS upgrade would be better (or less problems) for my particular eMac ... 10.3+ or 10.4+?
-
Can anyone help CK-7W Bluetooth hands-free kit
Can anyone help? I have a Nokia CK-7W Bluetooth hands-free car kit installed in my vehicle. I have recently up graded my mobile phone to a Nokia N 96, the phone is connecting by Bluetooth and all off the functions seem to work, the problem is with th
-
Just reinstalled Windows, Can't restore iTunes backup
I just reinstalled Windows 7 on my computer, and after installing the latest version of iTunes available from Apple, I can't restore any backup I made prior to the reinstall, with iTunes giving me error code -69. I've tried reinstalling iTunes, but n