IDevice not showing up after updating iTunes?

This issue has popped up for me (and my iPad Air device) a few times whenever a new version of iTunes is released & I've gone and updated to it. Just another little bug for Apple to fix at some point, I guess.
If it happens to you, Follow these simple steps below:
1. Close iTunes fully
2. Download the latest version of iTunes from here: http://www.apple.com/uk/itunes/download/
3. Open the iTunes Setup downloaded.
4. Click REPAIR, and next.
5. Once it is finished, restart your computer.
6. Open your iTunes, and plug in your device.
Done. Your iDevice should now show up as normal.

And if that doesn't work try Andrei Cerbu's post here or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
tt2

Similar Messages

HT4623 itune is not showing iphone after updateing to IOS6

itune is not showing iphone after updateing to IOS6

Have you tried the Basic Troubleshooting Steps...
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

Camera Roll not showing up after updating to 8.1

I know the 8.1 update was supposed to bring the Camera Roll back to the photos app, but it is not showing up for me after updating. I am looking in Albums section of the Photos app. All I see are All Photos, Videos, Slo-mo, Recently Deleted, and my personal albums. Anyone else having this issue or knows how to fix it?

I'm not sure if there exactly the same or not. I'll illustrate with an example.
Let say I have device 1 and device 2, both with iCPL turned on. I take 5 pictures with device 2, and they show up on device 1 under "All Photos". If I later turn off iCPL on device 1, I don't know if those 5 photos will will be shown in "Camera Roll" on device 1 or not. To be clear, I'm not saying they won't, I'm saying I haven't tested it and I don't know what happens.

Ipod will not show up after reinstalling itunes

Hi all,
I just replaced my hard drive and of course I lost my itunes library. After reinstalling itunes onto a new drive (Win XP), and attaching my ipod, my ipod does not show up. Itunes finds new hardware and brings up the library, but that's all. Any ideas?
Thanks!

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another USB port and computer
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Playlists not showing up after moving itunes to new computer

moved itunes to new computer and used an externa;l harddrive to move "iTunes" folder over. the most recent "setup" of itunes on old computer is not showing on new computer. For example "music" file size on external drive is 133GB - on new computer itunes, only 33GB. and, playlists have disapeared. any ideas?

See Make a split library portable for some background on moving the library successfully. You need the main iTunes library.itl file, its supporting files and the Album Artwork folder as well.
If you can find that data it should be possible to put everything together in the right shape and make it work.
Otherwise I have two scripts called ImportDevicePlaylists and SyncStats which may prove useful.
tt2

AppStore past purchases not Showing up after updating to IOS6

After I go into my iphone 4s and I go to Appstore and check my purchased items non of my purchases show up.
When i click in appstoreI> updates> purchased it either starts loading or crash.
I can see my purchased items in my ipod 4G and my syster Iphone 4S

I'm not sure if there exactly the same or not. I'll illustrate with an example.
Let say I have device 1 and device 2, both with iCPL turned on. I take 5 pictures with device 2, and they show up on device 1 under "All Photos". If I later turn off iCPL on device 1, I don't know if those 5 photos will will be shown in "Camera Roll" on device 1 or not. To be clear, I'm not saying they won't, I'm saying I haven't tested it and I don't know what happens.

Calendar not showing up after update?

I just did a software update and now my events aren't showing up on my mainscreen. I have it set on the "Today" theme so that my events show up on my mainscreen. After my update, they aren't showing up. I have a Pearl 8130. Any ideas?

Not sure if this is related but...(and I am on a MAC)
I just updated my BB9000 (running 4.6.0.167) to the new Desktop Manager Software v. 1.0.3 and when I completed my sync all of the data that HAD been in iCal has been wiped. Thankfully it is all still on the BB but I am stumped as to what has happened? I had been successfully using the two way sync mode by making sure I made NO updates to my desktop since for SOME reason RIM refuses to have an "overwrite (or replace) MAC data with BB data" option when syncing.
Is there something fundamental that I am missing here? Why won't the BB data show up on my iCal Calendar?
Thanks
Theo
Studio City, CA

Dotmacsyncclient.exe - Entry Point Not Found error after updating iTunes

Here is the error message:
The entry point SQLite3filecontrol could not be found in the library SQLite3.dll
Following the last update of iTunes on my PC (running Windows 7 x64), I'm getting the same error message again and again. It's not specific to an action that I perform, It is not appearing at regular intervals.
I could not find any solution on these boards yet. Here is the few things I have already tried to fix the issue :
- Download SQLite3.dll and copy it into C:\Windows\System32
Didn't fix anything
- Copy that dll file from the iTunes folder location like by entering the following command into a command prompt :
xcopy "%ProgramFiles%\Common Files\Apple\Apple Application Support\sqlite3.dll" %windir%\system32 /y
Didn't fix anything
I have not tried to reinstall iTunes because I think that I've read some people saying that it did not helped.
Last info, I am using MobileMe. Don't know if it is related.
Anyway It would be nice if someone could throw some ideas on this thread.
Thanks

Since Apple apparently doesn't know what a Windows-based PC IS, I'll throw you folks a bone...
If you're getting the error with SQLite3.dll, do a search for the file... grab the one out of the Common Files folders and put it into C:\Windows\SysWoW64\ folder.
Reboot and voila.
I just did that on this machine and the issue hasn't reappeared. Can't guarantee it'll work for you, but it appears to have for me.

Safari does not show favicons after update to 6.0.3

Hello,
today I updated my safari browser and after that all my favicons are delated (only the blue sphere is there) and after a whole reset of safari and restart of the system the icons are still missing . Help me please!!!
current version of Safari: 6.0.3

Hello:
You almost assuredly reset Safari.
The favicons do not disappear as a result of installing the OS X 10.8.3 update (which includes that latest Safari.
When you click on the web site the first time, the favicons will reappear.
Barry

Analyser not showing results after update

Can someone please view the below and help me to determine why the results are no longer being downloaded. Or point me in the right direction of support or a support online chat.
We just did an upgrade of the Adobe Captivate Quiz Results Analyzer 1.5, before the update i could successfully download to disk all of the quiz results and access all of the .xml files. After the upgrade I cannot download the results to disk or generate report. I have deleted the internal server locations and tried readding these and haven't had any success. I get a message when trying to download report which says "Data is not present on local file system. Downloading Course Data...." and then "Download could not be completed" When i try to save to disk I get an error message which says "Downloading Course Data...." and then "Download could not be completed"
The client is also having the same issue accessing the results on their end.
Any ideas or help will be greatly appreciated

Hi there,
Welcome to Adobe Community,
Please remove Quiz results analyzer from the systems where it is giving problems. Then reinstall it and reconfigure the internal server. If that also doesn't work then try to install Quiz results analyzer on a new account and check under that. Also try to do Acrobat.com reporting just to test and see if that's working or not.
Thanks!

Boot fails due to /dev/sdb not showing up after update

For some reason, my secondary hard disk has stopped being detected after I updated my Arch Linux machine today. This machine has not been updated for about a year (I have been away). Basically, /dev/sdb* is not in /dev/. There is only /dev/sda*.
The current kernel installed is 2.6.39.
The error I get on boot is when it tries to detect the hard drives. I would try to provide a log file, however every time I try to plug in a USB stick, it says that it is disabling IRQ #10, and it won't start the network so I can't ssh the information to any other computer. I can log in by removing sdb from the fstab, so I will try to get /var/log/messages on here later.
I am using udev to detect my hard drives on startup.
Anybody know how to fix this problem?
I can log in perfectly fine if I remove any mention of sdb from my /etc/fstab.
Thank-you in advance for your help,
kev717.
Last edited by kev717 (2011-07-17 01:49:12)

Assuming you have a BIOS based computer, have you tried the BIOS configuration program to see if the drive is detected by the BIOS ?

[SOLVED] Volume groups not showing up after update

nunikasi wrote:
Hello!
I run a arch linux setup with LVM volumes on a LUKS encrypted drive /dev/sda. The header resides in the initramfs-linux-ck.img (So kernel and header are on a USB stick and my hard drive is completely encrypted).
Everything worked nicely with this setup until today. I ran a
pacman -Syu
and the kernel was updated as normal and made a new initramfs-linux-ck.img on the usb stick (mounted in /boot). This is the way I always updated the kernel, and it always worked, but for some reason, after the reboot, and after typing my passphrase I got an error
ERROR: device '/dev/mapper/nunikasi-root' not found. Skipping fsck.
This was strange, so I booted the latest arch live-cd and did a
cryptsetup luksOpen /dev/sda nunikasi --header (pathToHeaderFile)
and entered the passphrase and still there are no volume groups in /dev/mapper. Am I wrong in thinking that this command should load my volume groups as
/dev/mapper/nunikasi-root
and
/dev/mapper/nunikasi-home
Running
vgscan
also reports no volume groups.
Additional information:
Last time I updated the kernel was around 24th of June.
I did run pacman -r linux before the update, assuming there is no need for it since I run linux-ck. I hope this is not relevant.
Do you know what went wrong?
What was the problem?
As I saw that dm-crypt had a problem with finding my logical volumes, I fired up
cryptsetup luksOpen /dev/sda nunikasi --header (pathToHeaderFile)
dhex /dev/mapper/nunikasi
and found that the lvm metadata was cut in half. So I ran
dhex /dev/mapper/nunikasi /dev/sda
and quickly saw that there was an attempt to make a MBR on /dev/sda (I saw the boot signature 55 aa on offset 1FE-1FF). I remembered that I tried to use GParted some days earlier to format a memory stick, and I probably forgot to change from /dev/sda before creating a MBR. This is most probably what happened, and now I had to restore the metadata in some way.
What was the solution?
As I had never made a backup of the metadata, I knew that LVM makes one for you and puts it in /etc/lvm/backup/. So I fired up dhex on /dev/mapper/nunikasi and searched for it. Found the offset and did:
dd if=/dev/mapper/nunikasi count=2148 skip=8928722944 of=lvm-metadata.txt iflag=skip_bytes,count_bytes
Now I had the metadata backup and the right UUID for my physical volume. Only steps left were:
pvcreate -ff -u [UUID] —restorefile lvm-metadata.txt /dev/mapper/nunikasi
vgcfgrestore -f lvm-metadata.txt nunikasi
vgchange -ay
And my setup is working again!
Have a nice day,
nunikasi
Last edited by nunikasi (2014-07-07 20:30:16)

nunikasi wrote:
clfarron4 wrote:Hmm... Have you tried breaking out an Arch installation disk and having a look with that?
Yes, I wrote that in the original post.
Sorry about that. I've just read it again.
OK, based on the information you've given us (LVM on LUKS, VG=nunikasi and LVs=root,home, backed up header), I would have thought that the commands you issued in your original post would have unlocked it. I'm not going to make any assumptions about the header of the actual LUKS partition though.
nunikasi wrote:I remember core/filesystems and some other core packages were updated.
I've had a look through my pacman.log and I can't think of anything that might upset it (that said, I am quite tired). I run 5 (maybe 6) different kernels (3.10, 3.12, 3.14 and 3.15 branches) and I haven't had any problems with finding PVs, VGs and LVs on either of my systems.
I'm at a loss as to what could be up right now and I'll this thread for tomorrow (because sleep beckons).
EDIT: Wow. That's quite something.
Last edited by clfarron4 (2014-07-08 11:21:46)

Bonjour printer not showing up after update

I have a Canon MX860 printer that - until this morning - was hooked up to my Mac via an Airport Express and Bonjour.
Yesterday I used Software Update to apply a Canon printer driver update. Since then, I have not been able to use my MX860.
I tried deleting the printer and adding it back, but it does not appear in the "Default" pane of the Print & Fax preferences "Add printer" dialog box. In fact, no printers appear there at all.
The Airport network the printer is on is working fine.
Any ideas?

Could this have anything to do with my problem? I have no printers in the list either and I'm unable to add them:
https://discussions.apple.com/message/15868039#15868039

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy

MacBook Pro (10.7.3) not shutting down after updating to latest iTunes

This is a bit of a strange one, and after searching high and low, I haven't seen any other references to it, so...here goes:
I'm working on a MacBook Pro (13-inch, Mid 2010) running OS X 10.7.3, and the complaint is this: the system will not shut down or eject a connected iPod (classic) or smartphone (Verizon Android phone) after updating to the latest version of iTunes.
I've been troubleshooting this for several days now, and I've tried the following:
1. Created a new admin account and tested from there. No change.
2. Created a backup image of the hard drive, erased & reinstalled 10.7, created temp admin account - issue resolved, but iTunes library unable to open because it was modified by a newer version of iTunes.
3. Ran software update to bring system current (as of 20 April 2012)
4. Issue reappears after software update.
5. Reinstalled 10.7.3 from Recovery partition.
6. Again, issue resolved, but unable to open iTunes library modified by newer version.
7. Update iTunes, issue returns.
I actually did several variations of the erase & install routine, as well as several admin accounts, but the basic gyst of it is that after updating iTunes, the system hangs at the spinning gear on shutdown every single time.
The version of iTunes that is reinstalled with Lion is 10.5.1. I don't know which version between that and 10.6.1 is causing the problem.
Not sure where to go from here, so I figured I'd throw it out to the community.
Thanks.

Well, after throwing my hands up in the air, I returned the MacBook Pro and iPod classic to their owner because I'd held onto them for over a week trying to troubleshoot the issue with no success.
Two days later, she contacted me and told me her iPod was the culprit -- it had some bad sectors on the hard drive. I had thought to check that, but she had data on the iPod that wasn't backed up anywhere, so I back-burnered that until later.
Glad to see I'm not going insane, though. ;^)

IDevice not showing up after updating iTunes?

Similar Messages

Maybe you are looking for