Idevice share export is jittery

I have 1080p AVCHD video that I have edited and when I share (export) to idevice 720 or 1080 the export is jittery and has frequent pixilation. If I share it as archive, the video comes out fine. I've checked the source mov files and they are fine. Any thoughts?
I'm on the most current i7 27" imac running Maverick and the trial version of FCPX 10.1

I meant to say, apple device share, not idevice share.
Still can't figure out what's going wrong.

Similar Messages

How can a mount a NFS share exported from OpenBSD?

Hello Apple Discussions:
I've been experimenting with NFS in a mixed OS environment, and have been successful exporting nfs share with tigerserver, and mounting it on both a powerpc linux system, and on a powerpc openBSD system.
Likewise, I can export a NFS share from the linux powerpc box, and mount it on the openBSD box and on the tigerserver, although, the latter required using the options (ro,sync,insecure) in my exports file.
However, when I export a share on the OpenBSD box, I can mount it on the linux box, but not on tigerserver.
I would like for the OpenBSD box to export a NFS share securely, with read-write permissions, to the tigerserver.
After reading so many tutorials, that it would be a page of links, just to list them all, I am pulling my hair out. However, I have found one thread that suggests, that perhaps what I'm trying to do is impossible:
http://www.bsdforums.org/forums/showthread.php?t=54308
Here it is suggested that the NFS won't work because tigerserver is not using UTF-8?
I will have to say, that I was somewhat alarmed, that the only times I succeeded in mounting an nfs share exported from linux onto tigerserver, it was when the "insecure" option is used in the /etc/exports file. There doesn't seem to be an equivalent for the linux style exports option "insecure", in the bsd style options of --maproot=user:group1:group2.
But I don't like using any options that say "insecure" anyways, so rather than trying to find out how to make openbsd "insecure", I would rather like to find out if there is a way to get tigerserver using UTF-8, at least when mounting NFS shares, if this is indeed the issue.
Here are the more technical details. I've created a user on all sytems named "fives" with the userid of 5555 and the groupid of 5555. I made the user local user in the local net info domain, but I've tried it with an LDAP user as well. The folders I wish to export and the folders into which to mount them are all owned by user fives and group fives, and have permissions set to 0775. The ip addresses are OpenBSD=192.168.222.111 TigerServer=192.168.222.233 LinuxPPC=192.168.222.253. I've included the relevant NFS setup files and running processes below:
ON THE OPENBSD BOX:
#/etc/exports
/fives -alldirs -network=192.168.222.0 -mask=255.255.255.0
/exports/fives -mapall=fives:fives 192.168.222.233 192.168.222.253
#/etc/hosts.deny
ALL: ALL
#/etc/hosts.allow
ALL: 192.168.222.233 192.168.222.253
#/etc/rc.conf.local
portmap=YES
lockd=YES
nfs_server=YES
#here's proof that the daemons are running on the OpenBSD box;
rpcinfo -p localhost
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100005 1 udp 863 mountd
100005 3 udp 863 mountd
100005 1 tcp 613 mountd
100005 3 tcp 613 mountd
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100021 1 udp 895 nlockmgr
100021 3 udp 895 nlockmgr
100021 1 tcp 706 nlockmgr
100021 3 tcp 706 nlockmgr
# actually, I don't see statd, but haven't found the equivalent in openbsd. There's rpc.rstatd, and maybe it should be listed here, but there doesn't seem to be a way to launch it directly. This is a competitor with the UTF-8 theory about why it's not working.
ON THE TIGER SERVER:
# here's proof that tiger server sees the mounts:
showmount -e 192.168.222.111
Exports list on 192.168.222.111:
/fives 192.168.222.0
/exports/fives 192.168.222.233 192.168.222.253
# here's the result of user fives' attempt at mounting a share:
sudo mount -t nfs 192.168.222.111:/exports/fives /imports/fives
mount_nfs: /imports/fives: Permission denied
# yet user fives has no problem mounting same share on linuxppc box.
What is different about OSX server? I thought it was supposed to speak NFS?
---argh... I'm steppin out for a pint.. Hopefully when I'm back it'll just work.

One thing not mentioned is that if you decide on the multiple user approach, you can have your music folder in Shared Documents so you only store the tracks once.
Each user is free to choose which of those tracks they want in their library.
There is an Apple help article on multiple users.
http://docs.info.apple.com/article.html?artnum=300432

Final Cut Pro takes time to share/export a 40 minute video

I bought a brand new new Macbook Pro (4 GB RAM, i5, HD 500 GB (300 GB available) Mid 2012 model and it takes 3-4 hours to share/export a 40 minute video without any effects applied on the clips. I have another Macbook Pro, same model and same specs and it just takes an hour to render the same video/project which I think is reasonable time.
Video files are from my Canon 60d camera which are .mov files. I usually export my projects to H.264 Video and AAC. (Share>Master File)
I don't have any problem exporting/sharing a 3 minute video with effects applied on the clips on my macbook Pro where I'm having a problem with because it has the same export/share time with my other MBP. It takes 5 minutes to share/export a 3 minute video which I think is reasonable. The problem is why my new Macbook Pro takes time to share/export a project with a video duration of 30-40 minutes compared to my other Macbook Pro.
Thank you for your help!
Final Cut Pro version: 10.0.8
Macbook: OS X 10.9.2

If you have two MBPs with exactly the same specs (including GPU) – and you have comparable free space on both system drives –and comparable free space on any media drives – then verify that your perceptions of their exporting times are different by doing a test with identical projects media and export settings – and ith no other apps running. If you confirm that one is much faster than the other, I'd suspect the GPU. Also open Activity Monitor to see what's being reported – particularly to see whether there are differences in the way memory is being used.
Russ

Final Cut Pro X - Share - Export Media - H.264 - Audio is panned to the left?!

My video has a soundtrack that is a stereo .WAV that I can play in QuickTime with no problem.
I added the .WAV to my FCPX project, exported H.264 of the finished video, and when I play the resulting file in QuickTime, the audio is panned to the left. There is still some stereo separation but it's like the right channel has been turned down. Alternately playing the video and the original .WAV in QuickTime makes it extremely obvious, but it's actually noticeable (and very annoying) even without the comparison.
Does this happen to anyone who exports H.264 via the Share -> Export Media menu item, or is it something in my project? (I didn't do anything to the audio apart from dragging it onto the timeline - I tried deleting the audio and dragging the file back on again but it still ends up panned to the left in the output).

It was set to Surround and 48Khz. I set it to Stereo (and 44.1Khz for good measure, as that is the sample rate of my soundtrack) and then re-exported to H.264, and now the audo is perfectly centered.
So that's perfect, thanks.
Now the only thing wrong with FCPX is how it crashes every ten minutes or so!

Premiere Elements 7: share/export DV-PAL in FLV/QT/WMV, black bars on top/bottom

During export (step "share", export for "PC" - sorry, if I use some wrong terms, got a german interface) of only DV-PAL video to FLV/QT/WMV there are always black bars on top/bottom of the video and the picture is wrong in aspect ratio. I can't help.
I tried different resolutions (original 720x576, 502x402, 320x240) and, as only possible with QT/WMV, different pixel aspect ratios (PARs), even user-defined PARs and 'wrong' aspect ratios (like 512x402). No chance. (I think precise user-defined data like "1,094" is not possible, because results did not change anyhow and this value is shown as "1".) With e.g. QT, 640x512, PAR 1,067 there are black bars with 6 px each.
My project settings must be correct I think: DV-PAL, 720x576, 4:3, 25 fps.
DV-PAL- and MPEG-Export/Share is no problem.
As a workaround I export DV-PAL and convert with XMediaRecode to FLV. But I want direct and clean export with PrEl. That's what I bought it for recently.
I wonder why there are only NTSC-setting suggested in FLV-share. I have to change the size by myself.
And I wonder why Wikipedia says PAR for DV-PAL is "1,0940" and Premiere says "1,067".
I'm new to Premiere Elements 7 (although I got some experience with Premiere 5/6.5, FinalCut, Cinelerra ...) using Windows XP.

I posted two videos on muvipix.com:
WMV cable modem settings PrEl (without audio, fps like original)
Strange: in VLC media player there are bars on the left and right (and slight faded bars on top/bottom - hope you can see) and in muvipix.com and Media Player Classic there are bars at top/bottom
http://muvipix.com/cpg/displayimage.php?album=lastup&cat=17219&pos=0
http://muvipix.com/cpg/albums/userpics/17219/Unbenannt.wmv
FLV (no resize, without audio, fps like original)
black bars on top/bottom, but only slight in Media Player Classic
http://muvipix.com/cpg/displayimage.php?album=lastup&cat=17219&pos=1
http://muvipix.com/cpg/albums/userpics/17219/Unbenannt.flv
I had to deactivate sound because this is Creative Commons stuff and I don't want to give credits. And I changed fps to "like original" because 30 fps as standard in PrEl is wrong. It's PAL here.
Thanks for your efforts.

Macbook Pro restarting during iMovie share/export

Hello all. I've started a thread in the iMovie section, but no one will respond. I have a client waiting on videos that I'm editing (I'm officially past deadline now), and all of a sudden iMovie 10.0.3 is causing a kernel panic and system restart every time I try and share/export the finished movie projects. All of my projects, new and old, are doing this. Here's what I've tried: Resetting PRAM, removing and reinstalling iMovie, deleting the iMovie plist file, Safe mode (iMovie won't even open in safe mode, it crashes immediately), reinstalling Mavericks (I'm running the latest). Nothing has worked. I'm completely lost and I need to get this problem fixed. My nearest Apple store is 2 hours away, and I won't have time to get there until Friday, if they can even see me.
Is there anyone on here that can help me? This is killing my business.
The original thread, complete with kernel panic logs is here: https://discussions.apple.com/message/26079695#26079695
Thank you,
Bryan

Hello VJ Maykel,
Welcome to the Apple Support Communities!
I understand that after you updated to Mac OS X Yosemite your computer randomly began to restart unexpectedly. It sounds as though you may be experiencing a kernel panic. If this is the case, please use the attached article as a resource for troubleshooting this situation.
OS X Yosemite: If your Mac restarts and a message appears
Best regards,
Joe

Can you share/export HD video as SD 4x3?

After editing HD video using FCPX, can you adjust settings when you share (export) to make a ProRes SD 4x3 720X480 video? Without using Compressor? Can you edge crop the video in the same step?

Easiest way is to create a 480 project; copy the t080 timeline and paste it into the 480 project. It will be letterboxed because of the different aspect ratios. If you don;t want letterboxing, use transform>scale to fill the screen or spatial conform – in the Inspector. (I prefer transform, because with scale and position I have more control over framing.)
Russ

Share/Export problems

Elements 9 Trial Version, Win XP system. My questions are about Share/Export.
- I don't see a way to export an mp4 file. From the "Adobe Flash Video" option, Advanced provides only FLV and F4V. From the "MPEG" option, the Format drop-down in Advanced is disabled and specifies MPEG2 Blu-ray (it produces an m2v file). (Vimeo doesn't accept either FLV, F4V, or m2v files.)
- I get no sound at all from the exported flv or m2v files. The sound is fine when previewing (or whatever it is you do) in Elements.
If it matters, my input to Elements is a 3-minute MOV file from a Kodak Zi8. Both input and output are 1920x1080. I want to create output to (1) display on my computer, (2) display on Vimeo, and (3) display on youtube.

There are a number of ways to export MP4s from a Premiere Elements project.
As Bill says, you can export it for portable devices using Share/Portable Devices/iPod.
If you're exporting it for display on the web, you should use John Cloudman's output settings in the FAQs to the right of this forum. (Although you are selecting the MOV output, it will come out as an MP4 because you are using the H.264 codec.)
http://forums.adobe.com/thread/623549?tstart=0

Share/Export Disabled - HTML publish questions

I would like to export my Keynote 09 as an HTML file, and I am currently able to do so using either Share/HTML or File/Export/HTML. But, when I do, I see no way of turning off the player (next slide, prev slide, audio, pause) that appears at the bottom of the slides. Also, none of my transistions/animations seem to work. (But the main issue at this point is how to turn off the player.) I went to the user manual and it states that to export to HTML, I should use the Share/Export menu, and shows that menu with more options than I get via the other methods. However, that option is grayed out for me. Another issue (while I'm asking) is - when I do publish to HTML, is there any way to keep the text as text, rather than have it all converted to images?
Thank you

There are a number of ways to export MP4s from a Premiere Elements project.
As Bill says, you can export it for portable devices using Share/Portable Devices/iPod.
If you're exporting it for display on the web, you should use John Cloudman's output settings in the FAQs to the right of this forum. (Although you are selecting the MOV output, it will come out as an MP4 because you are using the H.264 codec.)
http://forums.adobe.com/thread/623549?tstart=0

IMovie 6 will not Share/Export

I have successfully imported clips from my Sony HD camera. BUT iMovie 6 will NOT export nor share. Tried all possible options (even select clips only, reduced clip size down to 6 seconds). No luck. Any ideas what to do next? My computer is a new G5 Powermac desktop with 2 GB RAM. iLife 5 worked fine

If you open preferences, and select Play Movie Through Camera, you can export withut using Share. I have succeeded to export iMovie HD 6 projects this way. Before doing so, restart your computer, to give iMovie a clean start. I can playback my project through a Canopus converter this way without using Share.
I hope this helps. If iMovie HD 6 ever crashes, simply Restart your computer and try again.
Good luck and best wishes,
Gavin Bantock

Motion 5 Share/Export Buttons Greyed out

Hi, just got Motion 5 on it's own for a project we're doing in FCP7 and for some reason all the "next" or "share" buttons in the export menus are greyed out or disabled. We've messed with a lot of settings but to no avail.
Is there something I'm missing here? There's nothing written on the Motion product page about requiring Compressor or FCP-X to export and I haven't found anyone else online with this issue.

So there's nothing I can do to get this fundamental part of the software working? It's pretty stupid if it can't save.
The only option I have to take this higher is to get Apple Care video and that's $800 for something that appears to be a bug in Motion validating an external framework. From a software design perspective, the only reason that I'd want to grey those buttons is if there were a setting in each dialog that you needed to set before you could export or you were only using a trial version and you wanted to stop people from exporting it or if the dependent framework (e.g. ProApps export manager) wasn't validated in the registry within motion.
If they throw anything else at me like you need FCPX or Compressor or Lion then that's not right either since they had no mention of that on their website when I purchased it.
This is just really frustrating!

Ripple Training Video says I can "Share" (export) to Blu-Ray (PS3)

I'm successfully exporting HD video from Final Cut Pro 7.0 to MP4 H.264 for streaming on PS3. As you know, this workflow locks up Final Cut Pro until it's done. Then I serve the video using PS3 Media Server.
I'd prefer to use Compressor to handle this in the background - and with more processor utilization - but I have had no luck getting my PS3 to see the file when it's complete.
The issue seems to be that Compressor creates mutually exclusive *.264 video as well as an .ac3 audio files which the PS3 does not recognize - nor does Quicktime, MPEG Streamclip, or anything else I've tried.
Of particular interest is the tutorial listed in the link:
http://www.rippletraining.com/provideoapps.html
Click the last Final Cut Pro video "Output to Blu-Ray"
He mentions his client would like to watch on their PS3 and conveniently skips over how to do that.
Am I missing a step?
Thanks in advance.

Hi. Thank you for taking time to reply.
Watch the tutorial to see what I mean. Have you tried to create a file for Blu-Ray /PS3 using the "Share..." option in FCP and get it to work?
What the guy says in the tutorial is "My producers would like to watch this HD show before it's broadcast....since my producers want to watch their episode on their Playstation 3's, let's choose Blu-Ray." Then he goes on a slight tangent and talks about making a Blu-Ray Disc. Each option appears to basically create the h264 and AC3 files. He doesn't mention muxing the two files. That's where I got mixed up. I've figured it out.
I don't have to use Medialink. I own it but "PS3 Media Server" functionality blows it out of the water. You might like to try it out.
http://ps3mediaserver.blogspot.com/

Unable to share, export or drag and drop

iPhoto Application (problems just started)
1)Can't drag and drop from library to desk top
2)Unable to share or export
3)If library photo is double clicked I get a black frame with a "caution" symbol with ! point in center
4)In the picture menu bar there are framed pictures as well as black frames with a dashed white square symbol in center
What has or is happening? Is there any way to correct problem?
Had a recent diagnosis done on IMac. Was told failing power supply and failing hard drive. Have replaced the power supply.
Is above indication of failing hard drive?
Thanks to the Community in advance

Unlikely.
This is a problem in the LIbrary and not the application. So reinstalling is unlikely to have any effect.
Try rebuild the Library.
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Cannot get some photos to share/export. Help

Four of the 75 photos in an album I am sharing absolutelywill not export or copy or email in any way, no matter what I do. A "forbidden" icon (a diagonal slash though a circle) appears in the edge of the photo whenever I try to move/export it. Help. When I put it in an email, the email is blank.

Try selecting photos in Organizer and creating a new album by clicking:
Share >> Online Album
Then choose new album and Photoshop Showcase
In the dialog use the link next to Already a member?

Share exporting...done..but showing time remaining

I shared a short video clip, sending it to DVD. It worked just fine, creating a short, plain jane dvd. The next morning I saw that FCP had a dialog box saying "Exporting 2 Output Files: Finished Disc 100% complete". and the grey barber pole was just continuing along. I'm not worried about it but just curious. Is this normal? One would expect it to disappear when all was done or ask if you wanted to share/burn another copy or something.

dreamer_tooms, welcome to the forum,
if you have the AC adapter attached it will only show %age charge level; remaining time is not a factor when AC is attached.
When running on battery you can right click the battery guage and choose between time and %age charge level, just left click which it should display.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Idevice share export is jittery

Similar Messages

Maybe you are looking for