IDisk icon suddenly appearing on desktop

Something annoying happened.
I like to keep my desktop clean.
Then I had some friends over, they were playing with the iMac, and now the iDisk icon is randomly appearing during use; usually when i explore the Finder folder.
I eject it, and when I reboot, its not there...but once I start using the machine, it appears on the desktop out of nowhere.
It doesn't say iDisk though...it just has the same icon, but says my username (I guess, the same as my .mac account?)
why did it suddenly start appearing like that, and how can i get rid of it for good??
Thanks!
B

Look under Finder preferences, General tab -> "Show these items on the Desktop." Deselect "Connected servers."
  Mac OS X (10.4.8)  

Similar Messages

  • Why is iDisk icon still appearing on my desktop?

    Running Mountain Lion on my two computers.  This doesn't happen on my MBA.  However, on the iMac, the iDisk icon (specifically now a white disk image) keeps appearing on my desktop.
    The issue is not in settings afaik because there is no iDisk setting there any more (or MobileMe either).
    I don't think any of my programmes are using or trying to use MobileMe - but any pointers to obvious likely malcreants would be welcomed.
    Does anyone have any idea how to stop this?  (I used iDisk a lot, miss it and there is some irony in this)
    Thanks
    PS I did search for similar posts and couldn't find any - but it was a bit of a cursory effort.

    No.  It isn't.  Thanks - but even I am not that inept on my Macs.
    It reappears whenever I log in, sometimes after a decent delay to lull me into believing I have 'sorted' it.
    It isn't a problem, it is just irritating.  See above.  The irony.
    Doug

  • "Save As" or Downloaded file Icons not appearing on Desktop or FindeFolders

    I've had this on-going problem for weeks now. I thought it was isolated to Microsoft Office tools, and now I'm not so sure. (When I would save attachments from MS Office to my Desktop, they would not appear.)
    However, this morning I booted my machine brought up Safari and start surfing . Found a PDF I wanted to read, downloaded it, and no ICON. Spotlight says it's there, and I can open it from Spotlight, but the ICON is STILL not on my desktop.
    When I've had this problem before, I could log out/log back in and all the Icons magically appear.
    Anyone else having this issue?
    This seemed to start having right after I applied the 10.4.10 update. Yes, I've repaired Permissions, etc.

    Finder can sometimes be a real sluggard about updating folders, there used to be a nice contextual menu item called Nudge which would force it to update. Unfortunately it no longer works. I tried writing a simple Applescript to force Finder to update but I couldn't get that to work either. It seems especially prone to problems about updating the Desktop, which is one of a number of reasons I tend to not put stuff on the Desktop--I keep a couple of folders on the Desktop for the sorts of files one tends to drop there and put things into those folders instead. Rather than logging out/in you can force the Finder to relaunch, which generally does force an update of the Desktop and folder contents:
    1. Hold down the option key and click on the Finder icon in the Dock
    2. Select Relaunch from the menu
    All open windows will be closed by this action, but at least you don't have to quit your programs. Takes about a second or so.
    Francine
    Francine
    Schwieder

  • Enterprise activation icon suddenly appeared

    hi, this evening i picked up my phone to find a enterprise activation icon had appeared on my menu, I hadnt performed a reset or even turned it off, when i select the icon it is a white screen that appears.......what is this and how has it just appeared? my phone seems to working as normal just now, what should i do with it?
    thanks

    The Enterprise Activation icon is present on all BlackBerrys by default. It's just there. It just doesn't apply to any personal BIS account users. If it wasn't there in the past, I'm not sure why it wasn't. Just ignore it.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • External drive icon not appearing on desktop

    Hi - I have also posted this in the Time Machine forum as this is where my problem started. New iMac yesterday - replacement for faulty iMac which I had backed up using Time Machine. Reinstall from Time Machine effortless - no problem. Downloaded available software updates and 10.5.7 onto new iMac. No problem until I go to do another backup. Time Machine does not recognise external drive and I get "volume could not be found" message. At this point in time the external drive icon is showing on the desktop. Give up and go to bed thinking I will reformat external drive in the morning and start again
    This morning, I boot up the machine but the external drive icon has disappeared from the desktop. Unplug external HD from usb and plug in again. No icon on desktop although it shows in Finder and Time Machine.
    Anyway - I turned Time Machine off and then pointed it at the Ext. HD - went to back up now and magic - did complete backup and has done a second subsequently. Seems to have created a second backup folder separate from the one created by previous machine from which I reinstalled. Still no desktop icon! Switch iMac off and on again - still no desktop icon. So why - the Ext. drive is recognised and works so why isn't an icon for it appearing on the desktop?
    Please help - I need answers to these weird happenings
    Thanks
    Ann
    .

    Problem solved and it was so simple - just had to go to Finder, Preferences, General and tick the box that says external devices. Desktop icon has returned:-) Don't know why it became unticked but everything now is working absolutely fine (as far as I know lol) Hope this is the start of a good relationship between me and my new Mac!
    Ann

  • PDF icon images appear on desktop, but not in folders?

    I just updated to Windows 7. Before the update I could only view pdf icons on the desktop and inside folders would be a screenshot pdf icon image of the file. This was very helpful when using a lot of pdf files.
    NOW, after installing Windows 7, I have the exact opposite. I can see PDF image icons on my desktop, but when I go into a folder, I get the standard Adobe pdf red-white icon (no image).
    Has anyone experienced this? Ive googled this and Im not the only one with this problem. Has anyone found a fix for this?
    Thanks
    Update: I forgot to add that PowerPoint files, jpegs and bmp files still work and you can still see the preview images. Just not PDFs.

    function(){return A.apply(null,[this].concat($A(arguments)))}
    ~graffiti wrote:
    What happens if you open an older PDF in Acrobat and do a "save as"? Does the icon come back?
    graffiti - thanks for the reply. I did as you suggested but it didnt work. Now some icons are showing up but I dont know why nor do I know if this is a adobe issue or a windows 7 issues. While googling it looks like each side is blaming the other. Here is a screen shot. Some icons appear and one does not. I opened it and re-saved it but still doesnt show a thumbnail.
    http://img845.imageshack.us/img845/4892/screenshotpdficons.jpg
    Thanks for helping. Any other suggestions?

  • Firewire drive wouldn't show up on desktop; suddenly appeared. Why?

    Man, it's hard to fit everything I want to say in the subject line.
    I recently had a power supply failure on my G5 tower (one of the first 1.8 dual models). After replacing the power supply, everything appeared to be in working order, with no harm done (apart from my bank account). However, the external Firewire drive I use to backup the main drive would not appear on the desktop. Didn't matter if I restarted the whole machine or the drive, hooked it up to either port...the drive simply would not appear. When I turned the drive on, it was clear that it was still functioning in some fashion, as the read/write light on the front of the case was lit. The System Profiler did not see the drive either.
    That was the last day or two. This morning, I turned the machine on, and the drive still did not appear. I went through my usual morning websites, when I heard the tell-tale sound of Spotlight indexing a drive. I looked up at the corner and saw the drive icons (it has two partitions) on the desktop, and the Backup partition was being indexed. I checked them briefly (as I had to leave for work), and everything appeared to be as it was before the death of the power supply.
    So, my question is...why? What would cause the drive to suddenly appear this morning when it hadn't for the last two days? I did absolutely nothing different this morning when starting up the machine, yet today the drive was seen. I'm happy that it's working again, but extremely curious as to what might have caused this. Thoughts?

    Hi Brian Bernardini-
    I would presume that the drive is starting to fail. It would be wise to back it up as soon as possible?
    What model and make is the drive?
    Luck-
    -DP

  • How do I get rid of the iDisk icon from my desktop?

    I just got a new MacBook Pro 17" with the latest version of Snow Leopard. My local hard drive icon was missing but thankfully I figured out how to get that back. However, I also have the blue iDisk icon on my desktop for which I have no use. How do I get rid of that icon? I trying ejecting it (Command-E) but to no avail.
    Any advice would be greatly appreciated,
    Randy

    The same thing happened to me, and I finally found the answer. I thought I'd post in case others had the same problem:
    Snow Leopard has a new setting under System Preferences > MobileMe within the "iDisk" tab: there's a feature now called "iDisk Sync" that lets you create a virtual "DropBox" from your iDisk if this feature is turned on -- disabling it as a internet only drive.
    If you turn this feature off, however, your iDisk will work as expected and allow you to mount / eject it.
    Hope this helps!

  • Time Capsule Icon No Longer Appears on Desktop

    Two weeks ago I had AT&T U-verse cable, internet, & phone installed. As part of that installation they installed an AT&T router/wireless combination. The ethernet cable that was previously connected to Time Capsule is now connected to the AT&T device. There is no longer any ethernet connection to Time Capsule. The Time Capsule icon still appeared on my desktop and I manually performed back-ups from my Windows applications to Time Capsule. Time Capsule went from displaying a constant green light to displaying a flashing yellow light. That worked for several days. After about a week of that there appeared on my screen a 'wizard' of some sort recognizing the status of Time Capsule. It said this 'wizard' would eliminate the flashing yellow light. I followed the steps through the 'wizard' and at one point the flashing yellow light turned to constant green. There were a few more steps in the 'wizard' and when it was finished the flashing yellow light reappeared. The next time I tried saving files from Windows I could not connect to my w: drive, and the Time Capsule icon no longer appeared on my Mac desktop. I went into Airport Utilities and there is a box checked that should display the icon properly. Any ideas what's happening? How do I restore Time Capsule so I can back-up my files. Thank you.

    Welcome to the discussions!
    I don't have 10.6.1 yet, but have noticed this happens very occasionally on my MacBook Pro, but not on my iMac. Simply resetting Time Machine on my laptop has done the trick.
    Open System Preferences
    Click on Time Machine
    Click your Time Capsule to highlight it
    Click Use for Backups
    If that does not do it then delete the "com.apple.TimeMachine.plist" file. It's located as follows:
    Macintosh HD > Library > Preferences
    Restart your computer
    Then perform the same steps as above to setup Time Machine again.
    The resets will not affect any of your backups.

  • What are the icons that appear on the desktop when I download a program?

    OK, new to the Mac so please be gentle with me!
    I've downloaded some programs on my Macbook Pro.  The .dmg file appears and I click on it to install the program.  However, there is an icon placed on the desktop for the program, as well as it appearing on the launch bar.  What are these icons for, and can I delete them without affecting the program?
    Also, I'm trying to install HTC Sync for my phone but when I run the install, I get the message "HTC Sync Manager can't be opened because it is from an unidentified developer.  Your security preferences allow installation of only apps from the Mac App Store and identified developers."  How do I clear this and run the program?
    As I say, new to the Mac so be gentle with me.
    Duncan

    A tour of Mac basics might be a good idea.
    https://www.apple.com/support/macbasics/

  • Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

    Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

    Yes....It happens all the time. I also erased my HD and installed Snow Leopard but with no success. Tried lots of REBOOTING but nothing worked for me.As I have already installed the new OSX I think there is no need to go through the below procedure. What do you suggest?
    Before you go through the ritual of reinstalling the entire system just try to do a "factory reset" of your bluetooth environment. To do this you need to run the Bluetooth Explorer which is a utility installed as part of XCode.
    1. Launch Bluetooth Explorer.
    2. Select the "Modify Software & Device Configuration" from the Utilities menu.
    3. Keep the first 4 checkboxes checked (one will say "Full factory reset").
    4. Click "Perform actions" button (lower right of window).
    5. Reboot (possibly the Reboot NOW button will work, if not just do a normal reboot).
    Hopefully that will clear your problem(s) so you can re-pair your bluetooth devices.
    Good luck.

  • HDD icons not appearing on my Gnome desktop when mounted [SOLVED]

    I have several ntfs partitons that I'd like to see as icons on my Gnome desktop.  When I ran Debian/Lenny, I would mount them like so:
    $ sudo mount -t ntfs-3g /dev/sda2 /mnt/D
    After that command ran, a new icon (HDD) would appear on my Gnome desktop.  I didn't mess with fuseblock at all.  I'd like to get this behavior with Arch but don't understand what I need to do.
    Thanks!
    EDIT: foutrelis solved this, see his post below.
    Last edited by graysky (2009-01-02 13:56:36)

    foutrelis wrote:
    graysky wrote:If I mount them via the applet, they DO show up on my desktop.  If I mount them manually via $ sudo mount blah blah command, they don't show up at all.
    It looks like if the mount point is under /media it will show up on the desktop. This is not the case with /mnt.
    You're the man, foutrelis!  That did it!  I can't explain why it worked mounted to /mnt/D under Debian but /media/D works for me!  Thank you for the reply!
    Now if you can tell me how I can edit the list of partitions that Gnome gives users, you'll be batting 1000.  Basically, I don't want every single partition to appear in the list.
    Last edited by graysky (2009-01-02 13:58:12)

  • On my previous macbook when using an input device, i.e. external memory or CD etc. an icon would appear on the desktop,have recently bout an imac and this does not happen, wondering if there is a way to put input devices to appear on the desktop?

    on my previous macbook when using an input device, i.e. external memory or CD etc. an icon would appear on the desktop,have recently bout an imac and this does not happen, wondering if there is a way to put input devices to appear on the desktop?

    Hello, check Finder Preferences>General, & then the Sidebar tab also.

  • Cannot move iDisk icon on desktop display.

    Help, I cannot move my iDisk icon on the desktop display. All other icons move with no problem.

    Never mind. Problem "solved". I messed around with grid spacing, made some extra room by moving other icons, and was finally able to place the icon where I wanted it.

  • Firewire icon does not appear on desktop

    My Firewire is connected and turned on but it's icon does not appear on desktop. I ran disk utility and the drive's icon appears there. I can run repair tests on it but not a permissions test. When I checked "Get Info" I noticed a line that reads "OWNER ENABLED: NO". What Can I do--I have a lot of important files on the drive and need to access them. I have also run 3rd party disk utilities that say the firewire drive and all files are 'ok' but still I am not able to access it in any way.

    If disk utility sees the drive then you should be able to choose it from the list and click "Activate" (or "Mount" or whatever it says in English )
    PB G4   Mac OS X (10.4.7)  

Maybe you are looking for

  • How do i set up my iMac to message a friend's iPhone in the UK

    Hey all! I'd greatly appreciate instructions on how to set up messaging in OS X 10.8 so as to be able to contact a friend living in the UK via his iPhone so as to not be restricted by Adium or YIM. Thx!

  • Email address for replying from questions has changed

    The email address I have used to alert me when someone responds to my post needs  to get changed. How do I do that? Thanks.

  • WebUtil_File.FIle_Selection_Dialog  error in forms 10g release 2

    when I click to butotn to select the file from the OS system by using client_get_file_name function this alert message. The message; !!!!oracle.forms.webutil.file. FileFunctions bean not found. WEBUTIL_FILE.FILE_SELECTION_DIALOG_INT will not found.!!

  • Check a string in bash for unwanted characters

    Hello, I'm trying to do a bash script that checks a variable against a list of unwanted characters, e.g. to parse a file name. This doesn't really sound like a difficult task, but for some reason, whatever I've tried so far does not work, including m

  • Boot in 64-bit mode

    I have the latest MBA and trying to boot into 64-bit mode by holding down 6 and 4 keys, setting nvram boot-args and also editing /Library/Preferences/SystemConfiguration/com.apple.Boot.plist. None seems to work. ioreg -l -p IODeviceTree | grep firmwa