IDisk not longer visible in Sidebar - Modifying Preferences did not work

Hi there,
I also have some problems with the side bar in Finder.
I don´t longer have the iDisk-Icon in the side bar. I´ve unchecked and checked the box in Finder-->Preferences but that did not work...
I also had similar problems with a not proper working network icon in the sidebar which I could solve with a forced end of Finder.
Any ideas?
Thanks and best wishes...
Markus

Try this. With the external display connected and turned on and the MBP turned on, close the MBP. Close it, not shut down. This action is supposed to send a signal to the external that it is the only live display.
You should also check in the System Report if the external display is listed.

Similar Messages

IDisk not working in OSX 10.5.5

When i try to upload to my iDisk in 10.5.5, i get a -36 error. This happens with all three computers on my network running 10.5.5.
A fourth computer running 10.4.11 uploads to iDisk OK.
If I boot any of these computers from an external HD running 10.4.8, they all upload to iDisk OK.
Could this be a software firewall issue with 10.5.5?
If so, how do I fix it?

Breeezy wrote:
When i try to upload to my iDisk in 10.5.5, i get a -36 error. This happens with all three computers on my network running 10.5.5.
A fourth computer running 10.4.11 uploads to iDisk OK.
If I boot any of these computers from an external HD running 10.4.8, they all upload to iDisk OK.
Could this be a software firewall issue with 10.5.5?
If so, how do I fix it?
Did you update to MobileMe?

Arrangement Tab No Longer Visible in Display Preferences

I have a mini display to HDMI adapter that I have been using for the past three or four months to connect my MacBook Pro to my 32" Samsung LCD TV, and up until recently it had been working fine, but suddenly there have been issues. One day I was attempting to set my laptop to display the same image on the TV that is on my laptop display. To do this I assumed that I would simply have to go to the arrangement tab and select "mirror displays". This, however, did not work. Instead no image appears on the TV and I can no longer select the arrangement tab in my preferences. When I connect my computer to the TV the screen flashes blue for a second, as it always did when I attached it to a TV, but nothing shows on the television, except for a message saying "Mode Not Supported". I have tried everything I can think of to troubleshoot this problem. I have tried multiple HDMI cords, mini display to HDMI adaptors, different TVs, and different MacBooks, and nothing has worked. The same thing has happened with every combination, with no solution. If anyone knows how to fix this I would be very grateful. I assume I need to find some way to reset the display settings, but I cannot figure out how to do that.

I have the same problem. Ive been working with my iMac for quite some time now with my Panasonic TV attached to it (via thunderbolt to HDMI). Suddenly when i came home from work the mac screen wouldnt go on anymore. Also the only device listed in my screens is the Panasonic TV, also there is no arrangement tabs.
Things i've tried:
- Resetting NVRAM
- Booting in all possible ways
- Booted Linux LiveCD
- Apple Hardware test (which gave no problems)
All these things only were visible on my TV, disconnecting the TV did not have any effect, as it was before, when it still worked, it would automatically switch back to single screen mode (iMac).
Im starting to think this is a hardware issue, or can anyone at Apple give me some things to try before i need to call and send my imac all the way back.

How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

Question
How do you get firefox 4 to save tabs and windows and restore them? Don't say set preferences to open them on startup or use restore previous session under history; those do not work. Or is it no longer possible to save windows and tabs?

'''IT'S A EASY AS IT SHOULD BE.'''
This is essentially paulbruster's answer, but I've added the steps some might assume, but which aren't so obvious to those of us who are new at this, like me.
This solution might ''appear'' to be long and complicated, but after you follow the directions once, you'll find it's quick, clean, and simple. Almost like they designed it this way.
# If you haven't already, open a bunch of tabs on a few different subjects.
# Click the List All Tabs button on the right side of the tab strip.
# Select Tab Groups.
# Create a few groups as described [http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-create-a-tab-group here] , i.e. just drag them out of the main thumbnail group into the new groups they create.
# Now click on any thumbnail in any new group, but not the original big default group you may have left some tabs in.
#A regular Firefox window will open, but'' only the tabs in that group will be visible.'' You also now have the Tab Groups button in the tab strip.
# Right click on any tab, and there it is: Bookmark All Tabs. Click on it in the list of options. Or you can hit Ctrl+Shift+D instead and go straight to the dialogue box from the tab without any clicks. But don't go looking for this familiar option anywhere else, 'cause it's not there.
# Now pick an existing folder or create a new one just like you would have before and '''shlpam!''' there they are. New folders are supposed to end up in the Unsorted category all the way at the very bottom, but for some reason mine show up at the bottom of my last sorted category.
# DO NOT CLICK THE UPPER-RIGHTMOST X to close this group of tabs. This will close ALL of your tabs in all groups, currently visible or not. At least it asks if you're sure first. Instead, click your new Tab Groups button to return to the Boxes 'O Thumbnails window, and click the X in the group box you just bookmarked.
# Click on another thumbnail to repeat the process with another group, or click on a thumbnail in the big default box to return to the original FF window. You can also click the Tab Groups button at the upper right, or Ctrl+Shift+E, which will also get you ''into'' the Boxes 'O Nails window ''from'' FF.
# So now when you reopen FF after shutdown, simply select your folder from your Bookmarks and Open All in Tabs. '''Just like paulbruster said. '''

HT1368 why is the "buy all" no longer visible on my wish list? and it is not letting me delete items.?

why is the "buy all" no longer visible on my wish list? and it is not letting me delete items.?

The 'buy all' has, for some reason, been removed from the current version of iTunes - you can try leaving feedback for Apple and maybe it'll be added back in a future update :http://www.apple.com/feedback/itunesapp.html . Until then you can only buy items individually.
In terms of the 'x' for deleting items from it, other people have posted about that and it's affecting me as well. I assume that there is a bug with the current version of iTunes and/or a problem at Apple's end which they need to fix.

'show icon preview' not working, Icon preview no longer visible

I have lots of folders full of jpg files. The preview icon do longer appears and all i get is the genetic icon. This happened randomly yesterday and I don't know how to fix it. I have the 'Show Icon Preview' enabled yet I only get the generic icon. Any ideas why? (OS X 10.5.8). I have tried a restart, permissions fix, and reindexed my hard drive with spotlight. No luck. Please help!
Simply: I don't know how to get the preview back even after selecting the "show icon preview" box on the options. HELP!

There probably are some hidden probable causes for this behavior;
while not knowing if you perform any general maintenance in a
preventative way for your OS X system, some of the suggestions
I could provide here may mean little or nothing to some users, or
to others, who have done them for years as a matter of course, to
suggest those could be the same as an insult; or a laughing matter.
You could try rather basic things, a few steps above 'repair disk
permissions' in Disk Utility. That's been around since OS 10.1.5.
And it has a place among other steps one can do to help out.
Sometimes, you can start up into SafeBoot mode; then choose to
run Disk Utility, and repair disk permissions. When done, quit D.U.
and restart the computer normally. - Other repairs to the system may
be performed by booting up from the OS X installer and run Disk
Utility from the menu drop-down options in the main Installer window.
You can repair disk, verify disk (SMART verify), repair disk permissions
and verify disk permissions. Plus other aspects of Disk utility that are
tools to set up partitions and other things beyond a basic simple fix.
SafeBoot mode, basic:
+Hold the Shift key down on start-up, keep holding it until you get a login+
+screen, enter admin password, then when desktop appears, you can+
+use GO in menu bar to find Utilities folder, and run Disk Utility's repair+
+disk permissions. When done, quit the Utility and restart.+
There probably may be some .plist file controlling the view of image icons
and since I haven't followed that issue (experienced it in the past, forgot
what I did to fix it) I am not sure what preference file to suggest trashing.
But you can be very selective, when knowledgeable, and do that. Then,
later on, when you restart the computer the default setting would return.
You could set that to whatever (if not the default) & that may fix the matter.
{One preference file location that probably would contain your user account's
.plists would be in the Macintosh HD> User folder> Library> Preferences>
...Now, the correct one among these becomes important. There is a desktop
plist, a finder plist, and others. Since each user in a Mac with their own setup
account can change these, yours should be in your booted user account.
However, some time has passed since this kind of issue occurred and I didn't
need to delete a .plist to resolve it. Yet that may be a short fix.}
These issues usually have a cause; sometimes it may be due to other items
not quite right in the user interface and symptoms of that sometimes show up
in odd places and they may not be directly related. Subtle and dismissed, a
few of those quirks are not show stoppers in OS X. A 'safeboot' & disk utility
may resolve some; to find a correct .plist preference file & trash it may, too.
If the computer's hard disk drive is getting full of content you have added, it
may be time to archive image libraries and/or music libraries off the Mac's
internal hard disk drive and then thin out content on the computer. That can
help a computer run better. Damage to data on the computer drive may be
a result (or outright is) of over-filling the hard disk drive. Overwriting content
is sometimes an issue; it could be subtle, too, for awhile. Checked into it?
For some preventative maintenance chores, I have and use OnyX which is
a free running utility tool (which I refer to as a utility interface tool) that pulls
the strings in OS X that some users would not think of the Terminal utility
ways of making them work; this gives you a GUI format, an application to
run various sets of items rather easily. If done without concern, these tools
can do bad things (same as booted Disk Utility, drastic tools are onboard.)
OnyX is a free-running downloadable app from Titanium Software; and since
I only use it maybe once every several months (or sooner if bored or if active
in using one computer more than usual) & have it run in Automation selection
having chosen all the check-box choices, so it will do those. I also have OnyX
set in its preferences, to restart the computer after it is done running those.
This may do more than you need in this selection of Automation. I have never
had any issues with this; but some preference choices system-wide may need
to be set back to your choice, as it can be also set to wipe caches or other old
logs and misc stuff. A few settings won't make much different to default from.
Usually, I prefer not to shut off or restart my computer until such time as when
Activity Monitor shows some issue with virtual memory and swap files or space
on the hard drive being excessively allocated as Virtual Memory. At times, a
restart may be required. My Mac can run a few months without restart, but it is
left to sleep or I will put it to sleep. Even so, some basic background OS X items
may not automatically run as they should. You can force the maintenance cycles.
If the 'show icon preview' does not work even after performing catch-up maintenace
and including OnyX, SafeBoot, and others; and if you have at least 30% of the total
hard disk drive capacity open or free from use, then you may have to consider a few
other ideas. (Removing the plist file may be the only thing you'd need do.) Another
idea in a few cases of more severe odd behavior, and if you updated your Leopard
10.5 to your current/last level through use of the Delta or small update file, would be
to get the larger Combo (last version) and after repairing disk permissions, install it
over the similar system in your computer. 10.5.8 over 10.5.8. Then restart and go in
and repair disk permissions again. Perhaps later on, safeboot and do them.
That much effort is seldom needed. Preventative maintenance and care to not over-
fill the hard disk drive, helps to almost never see such a problem in your Mac OS X.
{In a few cases, people who have upgraded from an earlier OS X version (Tiger-to-
Leopard, for example) and had a problem, may still have a similar problem later. So
it is best to fix issues and not hope to upgrade over them. Unless it is a totally new
bare-bones secure zero-overwritten drive, correct partition map, reformat, new install.
Then, there should be no doubt if there was an odd problem in the software, only.}
Hopefully some of this late night rambling may be of some help.
+Answering a question in these forums can be like replying to a+
+statement thus, "why won't my car go?" And an answer starts+
+out by asking dozens of questions about the car itself and the+
+status of the car, if it has fuel, tires, if it's been in a flood, or if+
+there is an engine, fuel, battery... At least I know yours runs!+
Good luck & happy computing!

My right click is not working. the context menu does not come up and i can no longer drag files/folders. I have checked the mouse and track pad in system preferences and the correct boxes are all checked (with a support member). Please can you help

My right click is not working and producing the context menu or ability to drag files and folders. I just spoke with a phone support person and we checked that all the mouse/trackpad options for right click were correct and checked.
Please can you help with this.
It has only just happened in the last few days.
Many thanks

You might want to update your profile so that we can see what model iMac you have and what version of OSX you're running.
For this question, it might help to know if you're dealing with a trackpad, Magic Mouse, or something else?
(Until your issue's resolved, you can Control-Left Click to get the right click functionality).

After installing mavericks time machine no longer visible in finder. how can I get back to see it?

after installing mavericks i found my time machine disk is no longer visible in finder. Has someone else suffered same? thanks

Click on the Desktop. Select Preferences from the Finder menu. Check the General and Sidebar toolbar items. See that the appropriate boxes are checked.

Client no longer visible in Remote Desktop

For years I've controlled my Mac Mini from my MacBook over my home Wifi, but all of a sudden it's stopped working. The client (Mac Mini) is no longer visible in "Scanner", and will not connect via IP address 192.168.0.3
I've confirmed both computers are definitely on the same WiFi network, sharing options are turned on in Mac Mini's sharing preferences. I've deleted ARD prefs file from the client, I've restarted both machines.
Client is also not controllable from the VNC apps I have on my iPhone and iPad - so I think it's a client issue rather than the MacBook running ARD.
Any advice of things I can check? I've also just noticed that (despite being switched on) the Mac Mini is not visible for File Sharing. So there's definitely something fishy going on with that Mac Mini's network settings.

****. Seems I didn't try rebooting the wifi router. It's showing now. **** cheap netgear rubbish...

In Finder Go menu, Home Folder is grayed out although visible in Sidebars. Why?!

Recently downloaded Yosemite. In Finder Go menu, Home is grayed out. Home is visible in sidebars and I can access my folders within Home folder but not in Go menu or by Cnt + Shift + H or via Command + Shift + Go. I tried sudo chflags nohidden in Terminal to no avail. (Also tried it /Home. I don't know for sure whether things changed with Yosemite but I have the problem now. (Also, using Utilities to repair permissions, there were many re printer and some others; not sure whether any had negative effect.) Any thoughts? THANKS!

Oh for goodness sakes Mark! The light bulb just flashed!!! hahaha
Thank you so very, very much. Now I understand. I am so not tekkie savvy & don't understand the lingo just yet.
Lucky I posted the link to the video, so that you could highlight were I was going wrong and thank you
for taking the time to look at it to help me out. BLESS YOU FOR BEING YOU!
Now, if you don't mind, perhaps you could solve the problem that made me think to change the media player in the first place.
I upgraded to ML and for some reason I had real problems viewing the youtube videos. And then I had problems with online movie streaming.
A real long story made short. I got rid of Perian bcos it's not ML friendly. And VLC, bcos Quicktime is suppose to do the job. (Or so I have read.)
I uninstalled & re-installed Adobe Reader & Flash, Flip4Mac, Quicktime Player (I uninstalled the X version, thinking it was the problem & stuck with the simple version).
The only extension I have now is the Ad Blocker.
So why do the youtube videos take forever to buffer, then always stall & won't continue playing. The online movie streaming works great now. But not the youtube videos.
Any suggestions? Should I reinstall the VLC, will that help?

HT1192 Caps Lock is not working in my mac, after pressing long time too.

Caps Lock is not working in my mac, after pressing long time too.Please help me to sort this problem out.

I think even in newer versions of OS X there is a slight delay; just not so pronounced. My advice to get around it would be to install PCKeyboardHack and KeyRemap4MacBook - then do a couple of things:
Change the Caps Lock key in System Preferences > Keyboard > Modifier Keys to "None"
Use PCKeyboardHack to remap Caps Lock to keycode 110, the PC Application Key, which is unused on Apple keyboards.
Then use KeyRemap4Macbook to map that particular keycode to Toggle Caps Lock.Try selecting For PC Users > Change PC Application Key > Application Key to CapsLock.
I'm pretty sure that should get rid of the delay, which only happens when Apple is in charge of connecting the Caps Lock key to its action.
Really, though, I would personally recommend doing some much more awesome things with your Caps Lock key; it's prime keyboard real estate, and who uses caps lock anyway, except in the darkest corners of the Internet? Personally, I've remapped Caps to be Escape (for use in my text editor) when you press it by itself quickly, but to be Cmd+Opt+Ctrl+Shift when you press it with any other key. I call it the "Hyper" key, and use it to switch applications; Hyp+S = Safari, Hyp+D = email, Hyp+F = Finder... The point is, be creative, make the Caps Lock key work for you.
Oh, and the real Escape key maps to Caps Lock, so I can use it if I want to.

IPod Classic no longer visible in iTunes after upgrade tp Yosemite.

I have just upgraded to Yosemite and the latest iTunes. But my iPod Classic is no longer visible in iTunes. It is on the desk top and I can drag files to it, but is there a way of restoring it to iTunes?

Hello Matto Grosso,
After reviewing your post, I have located an article that can help with devices not being recognized in iTunes. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
iPod not appearing in iTunes - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Seven of my albums from iPhoto 9.5.1 are no longer visible. The photos are still in iPhoto - is there a way to get the metadata back?

Seven of my albums from iPhoto 9.5.1 are no longer visible. The photos are still visible in iPhoto, but the albums are completely gone (another 10 albums are still visible). The missing albums are visible in iPhoto Library Manager (I downloaded the free version and when it loaded the library the missing albums were visible)
About 6 months ago 4 different albums disappeared and I assumed my kids had accidentally deleted them; however, they haven't been allowed to touch the computer since then, so I can't blame them this time! Last time I lost albums I spent hours re-creating them but I am hoping that there is an easier way of getting the metadata to function again - I know I could create a new library with iphoto Library Manager but I would have to buy the full version and can't afford to do that.
Not sure if it has anything to do with updating the application? (I updated recently and I'm not sure exactly when the albums disappeared.

Use the rebuild function in iPhoto Library Manager. That does not require a purchase. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

My blue task/status bar at the bottom of the page is no longer visible. How do I turn that back on? The status bar feature under view does display it.

For some reason the blue status/task bar that would normally display at the bottom of the webpage (shows time, etc.) is no longer visible. I do not know how it got turned off and going to view-status bar simply enables a gray bar to display that says "done". I have searched using terms like "display task bar", etc and nothing comes up but view- status bar.
== This happened ==
Every time Firefox opened
== May 5th

That is the Windows Taskbar and not part of Firefox.
The Firefox Status Bar shows messages like Looking up and Waiting for and loading and Done.
If you do not see that Taskbar with Firefox closed then you may have hidden it.
Try to move the mouse at the bottom and see if you can pull it up with the left mouse button pressed.
If the Taskbar disappear if you open Firefox the check the Properties of the Taskbar to make sure that it is always visible.

My PC is no longer visible by my mac

my PC is no longer visible by my mac on the home network i created sometime ago. I did change some power settings on my PC but I do not see how this would effect network connection.
It shows that my PC is online, also my Mac is as well. How ever my Mac prompts that it can not find it.

Nope. That's the solution for iPods that appear on the Finder, but not in iTunes. I hope I get some other suggestions, but in the mean time I'm looking into restoring my iPod and buying a firewire cable from Apple, since the website says to use the one that came with the iPod (which I lost).
(EDIT) Nevermind... seems I can't restore or update if the iPod isn't recognized.

IDisk not longer visible in Sidebar - Modifying Preferences did not work

Similar Messages

Maybe you are looking for