IDisk unusable
Hi there,
ever since I updated my laptop to leopard I cannot back my mail folder to my idisk. I use a program called Chronosync to do incremental back ups but it freezes the whole machine after going for a while.
I used to do this just fine in Tiger. Even when I take my mail folder and physically copy it to the iDisk, it gives me errors alla this operation can not be completed etc etc...what is going on?
Thanks,
T
Hi, TLCDocta. Thanks for your post, since I'm having the same issues. I got Leopard the same time I got my new computer and have been having this problem just about every time I upload to my Public Folder. However, since I've only done it two or three times in the last six months, I didn't fret it too much.
I believe my problem is a variation on what you have: I'll upload a handful of files, all between 50 and 150mb, and at some point I get that error window you mentioned ("The operation cannot be completed because one or more required items cannot be found. (Error - 35)"). Then I need to re-start my computer before I can re-establish a connection to my iDisk.
Sorry I'm only reiterating what you've said and not offering any suggestions, but I want to make sure this topic stays alive. I'm eager for a solution. I very rarely had this problem in Tiger and on my old computer.
Similar Messages
-
Backup iPhoto Library to iDisk
I tried to backup my 2.4 gig iPhoto library to iDisk via the finder. It was so slow as to be unusable. I tried to backup via the browser but it has a 1 gig limitation. Is there any way to split up the iPhoto library to get under the 1 gig limit? It appears on the onset that using iDisk via the Finder for uploading large files is not a viable option. Other than the 1 gig limitation and the inability to backup anything other than a file (no folders), the browser option of uploading seems fine.
KenHave you tried Apple's backup utility Backup 3.1.2? It's on your iDisk in the Software folder.
Also once you get the library on the iDisk you can use a backup application like Synk Standard to make incremental backups to it. It will copy only those new or changed files making the incremental backup much faster.
Another possibility is to use Transmit. It uses the WEBDAV process for uploading files and can back items also. It's much faster than using the Finder. But always be sure to not sync but to backup. You don't want to copy both ways, only from your Mac to the iDisk.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Idisk app: delete file from iphone but NOT idisk?
maybe i'm missing something but how do you delete a downloaded file from just your iphone? when i tap the delete button in the downloaded file window it deletes it from my idisk.
Jeff Stone1 wrote:
well that is sort of what i thought. when the app was originally previewed it was stated that you can VIEW your documents stored on your idisk. but the mobileme page on the apple site says that you can DOWNLOAD files to your iphone.
i just looked and i only see where you can view and share files but i don't see anything about downloading files.
on a side note why is the icon blue didn't it change from blue to a pink with the change from .mac to mobile me. -
Domain Splitting and iDisk issues
First, my apologies if my question has been answered previously. I did search the forums, but didn't find anything promising.
I have split my large domain.sites file into four separate domain.sites file, following the guidance of folks on this forum. Each domain.sites file contains two sites; a one-page "index" site with links to all my sites and one of my "real" sites. (the index site has a slightly different name in each domain.sites file so I don't ovewrite).
But now I'm having a dickens of a time keeping all the sites online at the same time. I did some searching in these forums and discovered that I have to do two rounds of "publish all." Since these were existing files, the first time I told one domain file to "publish all," it erased the sites I had deleted from that file. After the second round of publishing, the sites have all come back (except for my biggest one, which I haven't published a second time; I'll do that overnight).
It looked like I have everything working...until I synced my iDisk. Then one of my sites disappeared again! Plus, some of my sites that I can access on-line don't show up on my iDisk.
I typically leave my iDisk mounted on my desktop. Do I need to change this if I'm working with multiple domain.sites files?
Thanks for any help you can provide!Thanks to both of you for your help. I after one last publish last night, I got all my sites on line.
Syncing my iDisk didn't work as well, though. Somehow I ended up with two copies of my iDisk on my desktop: one with the typical globe icon and another with a generic "drive" icon. The globe one was supposedly the current one, saying it had sinced this morning, but it only had some of my sites on it. (Oddly enough, it had each of the index sites, from all four domain.sites files, but not all the "real" sites from those files) The plain "drive" icon idisk had all the files on it. I couldn't get rid of either of them without restarting. But restarting seemed to set things to rights.
I've taken Varkgirl's advice and don't have my iDisk on my desktop. I didn't really access it much anyway.
Would it be of benefit to others for me to spell out the steps I took to split my domains and have a site index always show up as the site for the short url? I'd adjust it with some of the things I've learned in the process. I know there are good instructions for domain splitting in this forum already, but I don't know that my approach to a sites index with multiple domains has appeared on the forums before. -
Unused packages in import statement
Guyz,
Can anyone throw some light on this ?
Does using a lot of unused packages in import statement of a jsp affects its performance in terms of page loading ?
Thanks.I have just found the answer for my question in another forum.
Please visit:
http://saloon.javaranch.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=15&t=000240
Thanks. -
UNUSED EXISTING INDEXES / Index usage
We are using CRM 2007, Netweaver 7.0 with DB2 UDB v9.1 fixpack4 on AIX.
Is there a way to find out UNUSED EXISTING INDEXES for tables ? We have close 12 indexes on the crmd_order_index table and want to find out if some of them can safely deleted. Is there any way to monitor index usage in SAP ? Is there any toold to aid this ?
Pls advise.
thank you
regards
LaxmiLaxmi,
I am not aware of any such tools with DB2 9.1. However, "last_used" columns are being added to various catalog tables in DB2 9.7. Below is an excerpt from a slide presented in the TLU2008A "DB2 LUW V9.7 Cobra u2013 Storage is Charmed" session.
The last reference time of an object will now be maintained in the LASTUSED column of
the corresponding catalog table for the object
u2013 SYSCAT.INDEXES.LASTUSED (prior to V9.7 db2pd u2013tcbstats indexes)
u2013 SYSCAT.TABLES.LASTUSED
u2013 SYSCAT.DATAPARTITIONS.LASTUSED
u2013 SYSCAT.PACKAGE.LASTUSED
The LASTUSED column is of type DATE (default value is 1/1/0001)
Use Cases:
u2013 Detach table partitions that are no longer actively used (esp. when not partitioned by time)
u2013 Determine inactive or infrequently used indexes
u2013 Easily identify tables which are no longer in use
u2013 Get rid of unused packages
The presenter said the code will begin populating these columns in an upcoming fixpack.
Regards,
Rick -
Index issue with or and between when we set one partition index to unusable
Need to understand why optimizer unable to use index in case of "OR" whenn we set one partition index to unusable, the same query with between uses index.
“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
1. Created local index on partitioned table
2. ndex partition t_dec_2009 set to unusable
-- Partitioned local Index behavior with “OR” and with “BETWEEN”
SQL> CREATE TABLE t (
2 id NUMBER NOT NULL,
3 d DATE NOT NULL,
4 n NUMBER NOT NULL,
5 pad VARCHAR2(4000) NOT NULL
6 )
7 PARTITION BY RANGE (d) (
8 PARTITION t_jan_2009 VALUES LESS THAN (to_date('2009-02-01','yyyy-mm-dd')),
9 PARTITION t_feb_2009 VALUES LESS THAN (to_date('2009-03-01','yyyy-mm-dd')),
10 PARTITION t_mar_2009 VALUES LESS THAN (to_date('2009-04-01','yyyy-mm-dd')),
11 PARTITION t_apr_2009 VALUES LESS THAN (to_date('2009-05-01','yyyy-mm-dd')),
12 PARTITION t_may_2009 VALUES LESS THAN (to_date('2009-06-01','yyyy-mm-dd')),
13 PARTITION t_jun_2009 VALUES LESS THAN (to_date('2009-07-01','yyyy-mm-dd')),
14 PARTITION t_jul_2009 VALUES LESS THAN (to_date('2009-08-01','yyyy-mm-dd')),
15 PARTITION t_aug_2009 VALUES LESS THAN (to_date('2009-09-01','yyyy-mm-dd')),
16 PARTITION t_sep_2009 VALUES LESS THAN (to_date('2009-10-01','yyyy-mm-dd')),
17 PARTITION t_oct_2009 VALUES LESS THAN (to_date('2009-11-01','yyyy-mm-dd')),
18 PARTITION t_nov_2009 VALUES LESS THAN (to_date('2009-12-01','yyyy-mm-dd')),
19 PARTITION t_dec_2009 VALUES LESS THAN (to_date('2010-01-01','yyyy-mm-dd'))
20 );
SQL> INSERT INTO t
2 SELECT rownum, to_date('2009-01-01','yyyy-mm-dd')+rownum/274, mod(rownum,11), rpad('*',100,'*')
3 FROM dual
4 CONNECT BY level <= 100000;
SQL> CREATE INDEX i ON t (d) LOCAL;
SQL> execute dbms_stats.gather_table_stats(user,'T')
-- Mark partition t_dec_2009 to unusable:
SQL> ALTER INDEX i MODIFY PARTITION t_dec_2009 UNUSABLE;
--- Let’s check whether the usable index partition can be used to apply a restriction: BETWEEN
SQL> SELECT count(d)
FROM t
WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation | Name | Pstart| Pstop |
| 0 | SELECT STATEMENT | | | |
| 1 | SORT AGGREGATE | | | |
| 2 | PARTITION RANGE SINGLE| | 12 | 12 |
| 3 | INDEX RANGE SCAN | I | 12 | 12 |
--- Let’s check whether the usable index partition can be used to apply a restriction: OR
SQL> SELECT count(d)
FROM t
WHERE
(d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'))
or
(d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'))
SQL> SELECT * FROM table(dbms_xplan.display_cursor(format=>'basic +partition'));
| Id | Operation | Name | Pstart| Pstop |
| 0 | SELECT STATEMENT | | | |
| 1 | SORT AGGREGATE | | | |
| 2 | PARTITION RANGE OR| |KEY(OR)|KEY(OR)|
| 3 | TABLE ACCESS FULL| T |KEY(OR)|KEY(OR)|
----------------------------------------------------“OR” condition fetch less data comparing to “BETWEEN” still oracle optimizer unable to use indexes in case of “OR”
Regards,
Sachin B.Hi,
What is your database version????
I ran the same test and optimizer was able to pick the index for both the queries.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
SQL> set autotrace traceonly exp
SQL>
SQL>
SQL> SELECT count(d)
2 FROM t
3 WHERE d BETWEEN to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss')
4 AND to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss');
Execution Plan
Plan hash value: 2381380216
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 8 | 25 (0)| 00:00:01 | | |
| 1 | SORT AGGREGATE | | 1 | 8 | | | | |
| 2 | PARTITION RANGE ITERATOR| | 8520 | 68160 | 25 (0)| 00:00:01 | 1 | 2 |
|* 3 | INDEX RANGE SCAN | I | 8520 | 68160 | 25 (0)| 00:00:01 | 1 | 2 |
Predicate Information (identified by operation id):
3 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"D"<=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss'))
SQL> SELECT count(d)
2 FROM t
3 WHERE
4 (
5 (d >= to_date('2009-01-01 23:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-01-01 23:59:59','yyyy-mm-dd hh24:mi:ss'
6 or
7 (d >= to_date('2009-02-02 01:00:00','yyyy-mm-dd hh24:mi:ss') and d <= to_date('2009-02-02 02:00:00','yyyy-mm-dd hh24:mi:ss'
8 );
Execution Plan
Plan hash value: 3795917108
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 8 | 4 (0)| 00:00:01 | | |
| 1 | SORT AGGREGATE | | 1 | 8 | | | | |
| 2 | CONCATENATION | | | | | | | |
| 3 | PARTITION RANGE SINGLE| | 13 | 104 | 2 (0)| 00:00:01 | 2 | 2 |
|* 4 | INDEX RANGE SCAN | I | 13 | 104 | 2 (0)| 00:00:01 | 2 | 2 |
| 5 | PARTITION RANGE SINGLE| | 13 | 104 | 2 (0)| 00:00:01 | 1 | 1 |
|* 6 | INDEX RANGE SCAN | I | 13 | 104 | 2 (0)| 00:00:01 | 1 | 1 |
Predicate Information (identified by operation id):
4 - access("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss'))
6 - access("D">=TO_DATE(' 2009-01-01 23:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"D"<=TO_DATE(' 2009-01-01 23:59:59', 'syyyy-mm-dd hh24:mi:ss'))
filter(LNNVL("D"<=TO_DATE(' 2009-02-02 02:00:00', 'syyyy-mm-dd hh24:mi:ss')) OR
LNNVL("D">=TO_DATE(' 2009-02-02 01:00:00', 'syyyy-mm-dd hh24:mi:ss')))
SQL> set autotrace off
SQL>Asif Momen
http://momendba.blogspot.com -
IPhone 5S GPRS/E slow / unusable
Hi,
A month ago I upgraded from an iPhone 4 to the iPhone 5S. Ever since I had the 5S I have noticed the GPRS / E data is extremely slow and most of the time it is unusable as pages time out or you end up giving up.
I am on Tesco mobile in the UK (O2).
I decided a few days ago to compare my 5S with the iPhone 4 which my wife now has and is also on the same type of contact with Tesco mobile.
If I turn wifi off and turn off 3G/4G (Settings / Enable 3G/4G toggle) on both phones then I can see they both switch to GPRS mode. I load the same webpage on both phones together and although slow as you would expect on GPRS the iPhone 4 loads the page first while the iPhone 5S just sits there blank with the blue bar at the top initially moving then paused.
So I contacted Apple support to ask why. After many calls reseting the phone and updating to iOS7.1, checking setting with Tesco mobile etc I still dont have a fix.
Today I went into the Southampton Apple store, a genius lady acknowledged the issue once I showed her and straight away gave me a replacement saying it looked like hardware fault. However on testing the replacement it still had the issue. A more senior genius guy then looked at it and also saw the issue. He was suggesting that it must be my sim card so I said to them to show me an iPhone 5S with another sim card working like the iPhone4. They searched for another sim and then tried a new pay as you go O2 sim which they could not get working as it didn't seem to be activated. In the end I gave up as had already been in the store over an hour and thought as I got a replacement phone it was worth checking at home again.
Back home though as expected I get exactly the same issue with GPRS/E not being usable.
Does anyone else have this issue or know a fix? I also contacted a relative who also owns an iPhone 5S on vodafone and he also thought the GPRS / E is not usable compared to the iPhone 4.
I guess my next step will be to purchase a working pay as you go sim on O2 to see if it has the same issue.
Is this a general iPhone 5S hardware or software issue, I know must people probably are using 3G or 4G so maybe do not notice.
Be great to hear other 5S users experience using GPRS/E.
Thanks
NigelHi Nigel. I was having the same issue after recently getting a new 5s operating 7.1.2 however I'm not sure it's linked to GPRS/Edge. I'm on tesco mobile so probably a similar network to you in England. The phone for the past few weeks has been performing a lot slower than my previous 5 which was performing a lot quicker and snappier. I have been searching for a solution in the forums and nothing. I think I have found a solution though and I don't know how this works but it does. I simply changed the time format to 24 hours and vola it seemed to have fixed the problem. The 5s operates as it was designed to do now. It is so much snappier and responsive now with no lagging when loading apps or switching between apps and no more slow loading blue bar while loading webpages. Im very happy with the speed of the phone now so just flagging it up as a potential solution. Hope it works for you too. Let us know if it makes a difference. I'm hoping apple bring out a fix in this because I much prefer 12 hour time format.
-
Faulty iDisk downloads to ipod touch
Has anyone else experienced this problem with idisk and ipod touch?
I have tried several times via apple care and my apple store to correct a problem of incomplete downloads with the iDisk application to my ipod touch.
A page of four small jpeg photos will randomly drop one of the four photos when accessed via iDisk on my touch.
Each touch I have tried suffered the same problem.
Accessing the file from a computer works correctly.
Likewise, a page of text downloads incompletely . . . about 1/3 to 1/4 of the bottom of each page is missing when downloaded to an ipod touch.
I am baffled that the genius's at the Apple store are totally unconcerned with my issue, and that no one at apple care will even listen to a mobile me related issue.
In theory, idisk would be a great tool for a touch, in practice it seems useless for a touch.
I'm not just complaining, I'd like my idisk app to function as it should, any advice will be appreciated. It's sad that I have to turn to a public forum to seek an answer, rather than getting support from Apple.
thanks, bobmaybe reading this thread helps: http://discussions.apple.com/message.jspa?messageID=10977658#10977658.
-
I accidentally started a download of around 25 songs on iTunes using a gift card, but did it too the wrong iPod. Is there a way too cancel the downloads and transfer the unused credit too my other iPod?
Downloaded songs to wrong iPod. Can I stop, re-do on other iPod, get credit of unused downloads?!
iPod touch 2nd generation iPod touch with 4.2.1 iOS, stopping iTunes, downloading midway,You should be able to connect the iPod to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over and you can then sync them to your other iPod.
-
How do I get rid of the iDisk icon from my desktop?
I just got a new MacBook Pro 17" with the latest version of Snow Leopard. My local hard drive icon was missing but thankfully I figured out how to get that back. However, I also have the blue iDisk icon on my desktop for which I have no use. How do I get rid of that icon? I trying ejecting it (Command-E) but to no avail.
Any advice would be greatly appreciated,
RandyThe same thing happened to me, and I finally found the answer. I thought I'd post in case others had the same problem:
Snow Leopard has a new setting under System Preferences > MobileMe within the "iDisk" tab: there's a feature now called "iDisk Sync" that lets you create a virtual "DropBox" from your iDisk if this feature is turned on -- disabling it as a internet only drive.
If you turn this feature off, however, your iDisk will work as expected and allow you to mount / eject it.
Hope this helps! -
After performing the OS X 10.10.2 update, OpenGL applications, for example Starry Night Pro fail to run, there are numerous windows update/refresh problems (incomplete refresh, remnants of window/frame borders), and some applications, for example Google Chrome are unusable, as cursor motion in the application window causes the display to flash horizontal bars in the window.
I've tried a variety of things, including downloading the most current release of Xcode, turning on/off transparency in Accessibility, graphics switching, and a few other things, but the problem persists.
The App Store display behaves similarly. I am running a MacBook Pro.
This is the output from EtreCheck:
Problem description:
Screen/windows corruption
EtreCheck version: 2.1.8 (121)
Report generated March 11, 2015 at 10:26:15 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 36
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 23:26:45
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.96 GB (146.71 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple iPod
Western Digital My Book 1 TB
EFI (disk3s1) <not mounted> : 210 MB
WDP1 (disk3s2) /Volumes/WDP1 : 333.40 GB (9.12 GB free)
WDP2 (disk3s3) /Volumes/WDP2 : 333.40 GB (2.55 GB free)
WDP3 (disk3s4) /Volumes/WDP3 : 332.79 GB (94.00 GB free)
Western Digital My Book 1140 2 TB
EFI (disk4s1) <not mounted> : 210 MB
2TB_1 (disk4s2) /Volumes/2TB_1 : 666.79 GB (31.36 GB free)
2TB_2 (disk4s3) /Volumes/2TB_2 : 666.79 GB (58.76 GB free)
2TB_3 (disk4s4) /Volumes/2TB_3 : 666.18 GB (70.41 GB free)
Logitech USB Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Click for support]
/Applications/Utilities/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.1) [Click for support]
/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.40 - SDK 10.6) [Click for support]
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) [Click for support]
[not loaded] com.Ralink.driver.RT73 (1.1.6) [Click for support]
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) [Click for support]
[not loaded] com.cisco.nke.ipsec (2.0.1) [Click for support]
[not loaded] com.devguru.driver.DIFMCDFree (1.1.0) [Click for support]
[not loaded] com.devguru.driver.DIFMSerial (1.1.0) [Click for support]
[not loaded] com.fklt.driver (1.8.0) [Click for support]
[not loaded] com.novatelwireless.driver.3G (2.2.8) [Click for support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) [Click for support]
[not loaded] com.prolific.driver.PL2303 (2.0.0) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
[not loaded] com.sbig.driver.SBIGUSBEDriver (4.70) [Click for support]
[not loaded] com.sbig.driver.SBIGUSBLoader (4.70.2) [Click for support]
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.6) [Click for support]
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.6) [Click for support]
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
[not loaded] org.emul.driver.EarthMate (1.0.0d1) [Click for support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (2.2.8) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[not loaded] com.canon.MFManager.plist [Click for support]
[loaded] com.divx.dms.agent.plist [Click for support]
[loaded] com.divx.update.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[running] com.Logitech.Control Center.Daemon.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.adobeupdatedaemon.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.autodesk.backburner_manager.plist [Click for support]
[running] com.autodesk.backburner_server.plist [Click for support]
[loaded] com.autodesk.backburner_start.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.makerbot.conveyor.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[loaded] com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
[loaded] com.kodak.KODAK AiO Software Updater.plist [Click for support]
[running] com.parallels.mobile.startgui.launchagent.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
Google Drive Application (/Applications/Google Drive.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 6.0 [Click for support]
SlingPlayer: Version: Unknown [Click for support]
RealPlayer Plugin: Version: Unknown [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 6.0
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewer: Version: 9.5.5 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 40 Check version
User internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: Unknown [Click for support]
BrowserPlus_2.6.0: Version: 2.6.0 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
fbplugin_1_0_1: Version: Unknown [Click for support]
Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
GoPro [Click for support]
Growl [Click for support]
Java [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 748.96 GB Disk used: 602.25 GB
Destinations:
WDP3 [Local]
Total size: 332.79 GB
Total number of backups: 2
Oldest backup: 2013-04-03 12:26:32 +0000
Last backup: 2013-04-03 12:26:32 +0000
Size of backup disk: Too small
Backup size 332.79 GB < (Disk used 602.25 GB X 3)
STAR_TECH_EXT [Local]
Total size: 499.76 GB
Total number of backups: 2
Oldest backup: 2013-04-03 14:26:44 +0000
Last backup: 2013-04-03 14:26:44 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 602.25 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Creative Cloud
0% firefox
0% fontd
0% AdobeUpdateDaemon
Top Processes by Memory: ℹ️
670 MB Safari
567 MB firefox
464 MB softwareupdated
395 MB mds_stores
309 MB WindowServer
Virtual Memory Information: ℹ️
1.43 GB Free RAM
7.87 GB Active RAM
6.40 GB Inactive RAM
1.47 GB Wired RAM
7.30 GB Page-ins
205 KB Page-outs
Diagnostics Information: ℹ️
Mar 11, 2015, 04:04:23 PM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-160423_[redacted]. cpu_resource.diag [Click for details]
Mar 11, 2015, 02:54:29 PM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-145429_[redacted]. cpu_resource.diag [Click for details]
Mar 11, 2015, 10:18:18 AM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-101818_[redacted]. cpu_resource.diag [Click for details]
Mar 10, 2015, 10:55:10 PM Self test - passed
Mar 9, 2015, 03:21:58 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2015-03-09-032158_[redacted].cpu _resource.diag [Click for details]Here is the diagnostic script output:
Start time: 12:06:12 03/14/15
Revision: 1290
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C1510)
Kernel Version: Darwin 14.1.0
Time since boot: 3 days 13:11
UID: 502
Memory
BANK 0/DIMM0
Size: 8 GB
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
BANK 1/DIMM0
Size: 8 GB
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
USB
Hub (Belkin Corporation)
My Book 1140 (Western Digital Technologies, Inc.)
My Book (Western Digital Technologies, Inc.)
USB Receiver (Logitech Inc.)
USB Receiver (Logitech Inc.)
FileVault 2: On
Activity
CPU: user 13%, system 7%
CPU usage (%)
plugin-container (UID 502): 100.0
com.apple.WebKit (UID 502): 26.2
File opens (per sec)
AdobeUpdateDaem (UID 0) => /tmp/UUID_OUT (status 60): 6
Energy (lifetime)
WindowServer (UID 88): 7.44
com.apple.WebKit.WebContent (UID 502): 7.22
Energy (sampled)
plugin-container (UID 502): 99.13
com.apple.WebKit.WebContent (UID 502): 23.60
WindowServer (UID 88): 21.29
com.apple.WebKit.WebContent (UID 502): 13.16
Console (UID 502): 12.28
Memory (MB)
kernel_task (UID 0): 1327
Font issues: 1
Listeners
launchd: ftp
System caches/logs
3.6 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-19 com.apple.WebKit.WebContent crash
2015-02-20 Topaz Adjust 5 crash
2015-02-20 Topaz ReStyle crash
2015-02-20 com.apple.WebKit.WebContent crash x2
2015-02-21 com.apple.WebKit.WebContent crash x2
2015-02-25 com.apple.WebKit.WebContent crash
2015-03-04 system_profiler crash
2015-03-07 com.apple.WebKit.WebContent crash
2015-03-08 MPEG Streamclip hang x2
2015-03-08 com.apple.WebKit.WebContent crash
I/O errors
disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions 1
disk2s2: do_jnl_io: strategy err 0x6 1
disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions 1
disk2s3: do_jnl_io: strategy err 0x6 1
disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions 1
disk2s4: do_jnl_io: strategy err 0x6 1
disk3s2: do_jnl_io: strategy err 0x6 1
disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions 1
disk3s3: do_jnl_io: strategy err 0x6 1
disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions 1
disk3s4: do_jnl_io: strategy err 0x6 1
disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions 1
disk4s3: do_jnl_io: strategy err 0x6 1
Volumes
disk1: /
disk5s3: /Volumes/WDP2
disk5s2: /Volumes/WDP1
disk5s4: /Volumes/WDP3
disk6s2: /Volumes/2TB_1
disk6s4: /Volumes/2TB_3
disk6s3: /Volumes/2TB_2
disk7s2: /Volumes/Starry Night Pro 7
HID errors: 3
Kernel log
Mar 8 17:08:19 firefox (map: 0xffffff80501790f0) triggered DYLD shared region unnest for map: 0xffffff80501790f0, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 8 17:08:59 firefox (map: 0xffffff8051e54870) triggered DYLD shared region unnest for map: 0xffffff8051e54870, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 9 08:11:09 jnl: disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s2: write_journal_header: error writing the journal header!
Mar 9 08:11:09 jnl: disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions
Mar 9 11:42:59 firefox (map: 0xffffff8031b5e780) triggered DYLD shared region unnest for map: 0xffffff8031b5e780, region 0x7fff89e00000->0x7fff8a000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 10 13:44:08 Limiting closed port RST response from 310 to 250 packets per second
Mar 10 23:03:12 firefox (map: 0xffffff802a954780) triggered DYLD shared region unnest for map: 0xffffff802a954780, region 0x7fff90000000->0x7fff90200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 10 23:20:37 Limiting icmp unreach response from 302 to 250 packets per second
Mar 11 08:39:04 jnl: disk4s3: write_journal_header: error writing the journal header!
Mar 11 08:39:04 jnl: disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions
Mar 13 17:42:33 Limiting icmp unreach response from 428 to 250 packets per second
Mar 13 17:42:34 Limiting icmp unreach response from 433 to 250 packets per second
System log
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128828
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128829
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128830
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128831
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:32:27 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle!! 7
Mar 14 09:35:28 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:47:41 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Installer" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:50:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:52:55 WindowServer: WSGetSurfaceInWindow : Invalid surface 583724228 for window 1898
Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:48 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:49 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:55 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:10:08 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
launchd log
Mar 8 17:07:46 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 9 11:41:23 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 10 22:48:48 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = imklaunchagent.14852, service = com.parallels.inputmethod.ParallelsIM.5712, error = 134: Service cannot load in requested session
Mar 10 22:48:58 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.WacomTouchDriver.183780, error = 134: Service cannot load in requested session
Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = prl_deskctl_age.14812, service = com.parallels.mobile.prl_deskctl_agent.220416.UUID, error = 134: Service cannot load in requested session
Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.TabletDriver.184064, error = 134: Service cannot load in requested session
Mar 10 22:56:21 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.apple.photostream-agent, error = 119: Service is disabled
Loaded kernel extensions
com.Logitech.Control Center.HID Driver (3.6.0)
com.Logitech.Unifying.HID Driver (1.2.0)
com.epson.driver.EPSONProjectorUDAudio (1.40)
com.parallels.virtualsound (1.0.36 36)
System services loaded
com.adobe.adobeupdatedaemon
com.adobe.fpsaud
com.apple.watchdogd
com.autodesk.backburner_manager
com.autodesk.backburner_server
com.autodesk.backburner_start
com.google.keystone.daemon
com.makerbot.conveyor.daemon
com.oracle.java.Helper-Tool
com.oracle.java.JavaUpdateHelper
com.parallels.mobile.dispatcher.launchdaemon
com.parallels.mobile.kextloader.launchdaemon
org.macosforge.xquartz.privileged_startx
System services disabled
com.apple.security.FDERecoveryAgent
com.apple.mtmd
com.apple.mrt
com.apple.mtmfs
Login services loaded
com.GoPro.GoPro-Importer
com.Logitech.Control Center.Daemon
com.adobe.AAM.Scheduler-1.0
com.adobe.ARM.UUID
com.adobe.ARM.UUID
com.adobe.ARM.UUID
com.adobe.AdobeCreativeCloud
com.apple.Safari
- status: 78
com.apple.mrt.uiagent
com.citrixonline.GoToMeeting.G2MUpdate
com.divx.dms.agent
com.divx.update.agent
com.google.keystone.system.agent
com.kodak.BonjourAgent
com.kodak.KODAK AiO Firmware Updater
com.kodak.KODAK AiO Software Updater
com.oracle.java.Java-Updater
com.parallels.mobile.prl_deskctl_agent.launchagent
com.parallels.mobile.startgui.launchagent
com.valvesoftware.steamclean
com.wacom.wacomtablet
gldrvmond
org.macosforge.xquartz.startx
Global login items
/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User login items
Google Drive
- /Applications/Google Drive.app
USB Display Agent
- /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
USB Display Agent
- /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User crontab
#SqzS VERSION = 1.0.0
#SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
#PLEASE DO NOT EDIT.
# Enc=1 Name="Update Virus Protection" EvType1=1 EvType2=0 Sched=2
0 8 * * 5 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUdf"
# Enc=1 Name="My AntiVirus Scan Task" EvType1=2 EvType2=0 Sched=2
#0 9 * * 6 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" -n 2 "/Library/Application Support/Symantec/AntiVirus/ScanNotification.app/Contents/scheduledScanner" " " "NVsi" "SCae" "path" '/' "kydo" "niCE" "long" 0
# Enc=1 Name="My Product Update Task" EvType1=1 EvType2=0 Sched=3
0 8 * * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 3 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUlu"
#SqzS END SYMANTEC CRON ENTRIES
Safari extensions
Open in Internet Explorer
- com.parallels.openinie
Widgets
TimeCalc
eCalc_Scientific
iCloud errors
bird 137
cloudd 18
storedownloadd 2
CallHistorySyncHelper 2
Continuity errors
lsuseractivityd 21
sharingd 11
Restricted files: 10847
Lockfiles: 19
High file counts
Desktop: 84
Accessibility
Keyboard Zoom: On
Scroll Zoom: On
Contents of /Library/LaunchAgents/com.canon.MFManager.plist
- mod date: May 22 05:23:32 2012
- checksum: 290641261
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.canon.MFManager</string>
<key>Program</key>
<string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
- mod date: Nov 17 02:11:48 2014
- checksum: 637650676
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.dms.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.divx.update.agent.plist
- mod date: May 19 16:24:29 2014
- checksum: 3867571547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.update.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
<string>/silent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>10800</integer>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.kodak.BonjourAgent.plist
- mod date: Sep 21 01:39:00 2012
- checksum: 2625351456
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kodak Version</key>
<string>7.1.6.10</string>
<key>Label</key>
<string>com.kodak.BonjourAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Printers/Kodak/AiO_Printers/KodakAiOBonjourAgent.app/Contents/ MacOS/KodakAiOBonjourAgent</string>
</array>
<key>ServiceIPC</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- mod date: Feb 15 11:22:20 2014
- checksum: 2857777334
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>71</integer>
<key>Minute</key>
<integer>54</integer>
<key>Weekday</key>
<integer>5</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.parallels.mobile.prl_deskctl_agent.launchagent.plist
- mod date: Feb 24 10:45:51 2015
- checksum: 1795713191
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/etc/com.parallels.mobile.prl_deskctl_agent.launchd</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.parallels.mobile.prl_deskctl_agent.launchagent</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
<string>LoginWindow</string>
</array>
<key>Program</key>
<string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Agent.app/Contents/MacOS/prl_deskctl_agent</string>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
- mod date: Oct 11 17:37:46 2013
- checksum: 2972905917
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnvironmentVariables</key>
<dict>
<key>RUN_WITH_LAUNCHD</key>
<string>1</string>
</dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<true/>
</dict>
<key>Label</key>
<string>com.wacom.wacomtablet</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
<string>LoginWindow</string>
</array>
<key>Program</key>
<string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
<key>RunAtLoad</key>
<true/>
...and 4 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- mod date: Aug 11 16:52:54 2014
- checksum: 2451978492
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.autodesk.backburner_manager.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 3394451584
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/usr/discreet/backburner/nrapi.conf</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.autodesk.backburner_manager</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburnerManager</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_server.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 2405015914
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/usr/discreet/backburner/nrapi.conf</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.autodesk.backburner_server</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburnerServer</string>
</array>
<key>Nice</key>
<integer>18</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_start.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 597826117
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>RunAtLoad</key>
<true/>
<key>Label</key>
<string>com.autodesk.backburner_start</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburner</string>
<string>boot</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.makerbot.conveyor.plist
- mod date: Dec 2 11:47:26 2013
- checksum: 147573995
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.makerbot.conveyor.daemon</string>
<key>WorkingDirectory</key>
<string>/Library/MakerBot</string>
<key>ProgramArguments</key>
<array>
<string>/Library/MakerBot/conveyor-svc</string>
<string>--config_file</string>
<string>/Library/MakerBot/conveyor.conf</string>
</array>
<key>KeepAlive</key>
<true/>
<key>EnvironmentVariables</key>
<dict/>
<key>RunAtLoad</key>
<true/>
<key>UserName</key>
<string>_conveyor</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.parallels.mobile.dispatcher.launchdaemon.plist
- mod date: Feb 24 10:45:50 2015
- checksum: 1994226602
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.dispatcher.launchdaemon</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Dispatcher Service.app/Contents/MacOS/prl_pm_service</string>
<string>-e</string>
<string>--logfile</string>
<string>/var/log/prl_disp_service_server.log</string>
<string>--pidfile</string>
<string>/var/run/prl_pm_service.pid</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.parallels.mobile.kextloader.launchdaemon.plist
- mod date: Feb 24 10:45:51 2015
- checksum: 3938648138
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.kextloader.launchdaemon</string>
<key>ProgramArguments</key>
<array>
<string>/sbin/kextload</string>
<string>/Applications/Parallels Access.app/Contents/Library/Extensions/10.9/prl_virtual_sound.kext</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /private/etc/ssh_config
- mod date: Nov 19 19:03:16 2012
- checksum: 1281775184
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jan 20 19:45:18 2011
- checksum: 408149527
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jan 29 16:03:43 2010
- checksum: 2544798274
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Sep 11 18:20:35 2011
- checksum: 2170691092
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Oct 19 12:47:52 2009
- checksum: 10744905
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
- mod date: Jan 30 08:36:08 2015
- checksum: 1189540302
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
- mod date: Dec 18 09:24:48 2008
- checksum: 3493273791
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
- mod date: Dec 15 10:55:51 2014
- checksum: 3001252484
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrixonline.GoToMeeting.G2MUpdate</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/CitrixOnline/GoToMeeting/G2MUpdate</string>
</array>
<key>StartInterval</key>
<integer>3660</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.parallels.mobile.startgui.launchagent.plist
- mod date: Mar 10 23:00:25 2015
- checksum: 662430762
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.startgui.launchagent</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Parallels Access.app/Contents/MacOS/prl_deskctl_wizard</string>
<string>--autorun</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.valvesoftware.steamclean.plist
- mod date: Mar 7 15:48:06 2014
- checksum: 1327160095
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.valvesoftware.steamclean</string>
<key>Program</key>
<string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
<string>Public</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>SteamContentPaths</key>
<array>
<string>/Users/USER/Library/Application Support/Steam/SteamApps</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Applications/Steam.app</string>
</array>
</dict>
</plist>
App extensions
com.google.GoogleDrive.FinderSyncAPIExtension
com.parallels.desktop.console.Resource-Monitor
Installations
Topaz Detail2: 11/15/12, 2:58 PM
Topaz DeNoise 5: 11/15/12, 2:57 PM
Topaz Adjust 5: 1 -
I've been publishing just fine for the past few days and all of the sudden, when I click 'Publish Site' now, the 'content rights' pop up shows up. But then it wants me to sign into MobileMe (to which I'm already signed in). When I click 'sign in' it takes me to System Preferences > MobileMe > Account. I click on iDisk and it says "20.4 GB total, 2.7 MB used, 20.4 GB available"
(I'm not sure why my GB available is still the same even though I've used 2.7 MB.... it wouldn't really matter though if I was able to publish.)
I went back to iWeb to my Site Publishing Settings page and at the bottom there's a bar labeled 'iDisk Storage' and it's completely blue (meaning used).
I also went to my MobileMe account to 'Summary' and under 'Mail and iDisk Storage' it says '3 MB of 20 GB used'.
I'm assuming that it's not letting me publish because it thinks that I have run out of iDisk storage but I could be wrong. I just renewed my MobileMe account in Feb so I'm all payed up.. that shouldn't be the problem. Do you know of any other reasons why it won't let me publish?
I feel like something is wacky with my iDisk Storage either way.
I really hope all of this stuff makes sense. I'm fairly new to Mac and I'm still not sure about all of the lingo.
Thank you for any advice you can give! Any suggestions will be MUCH appreciated!!
-AshleyTry the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
reboot.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT -
Yoga 2 Pro stuck volume, missing cursor, onscreen keyboard unusable
I'm having several issues with a Yoga 2 Pro laptop running Windows 8.1 that's about a year old.
1) Volume is stuck at 0. I can raise the volume, but it automatically lowers back down to zero, as if the volume-down key is stuck. The volume indicator is always onscreen.
2) Cursor is missing, however I can still right click/left click. Also, the cursor will reappear when I uninstall the Synaptic touchpad drivers.
3) The onscreen touch keyboard is unusable. I can click on the icon and it pops up, but it immediatly goes back down.
4) Side screen charms won't stay on screen (example: pressing the F10 key or project screen the side menu pops in but immediately pops out, similar to the keyboard). Also if I swipe in from the right and try to use anything (devices, settings, etc.) it does not respond
5) Pressing the start key doesn't bring it to the start screen, but holding it down for a few seconds does.
The above problems still exist in safe mode.I'm thinking it's a hardware issue or a bad connection of some kind. I've tried:
1) Removing/reinstalling various drivers (touchpad, audio, graphics)
2) Disabling services (YMC comes up often when looking at trackpad problems, but this hasn't worked for me)
3) Uninstalled/reinstalled programs (Energy Management, Transitions, etc.)
4) Did a complete factory reset at one point, had no effect.
I've had the problem a couple times before, and one thing that DID work was to hold down the power button for ten seconds while the computer was off, then let it reboot. Unfortunately that solution is no longer working. The threads I've linked below have been the closest I've found to a problem like this, but neither of their solutions worked for me.
https://forums.lenovo.com/t5/Yoga-Flex-Laptops-and/Yoga-13-Volume-Control-Issues/td-p/976589
https://forums.lenovo.com/t5/Yoga-Flex-Laptops-and/Yoga-2-Pro-Problem-Volume-Touch-Touch-Keyboard-no...
Any help would be much appreciated! Definitely affecting my usability of this otherwise wonderful machine.Update in case anyone else comes across a similar problem: I ended up sending my laptop into warranty, and it came back a week later working completely. No idea what the problem, cause, or fix was, although they didn't replace any major parts (battery, cable, cpu, fan, hard drive, keyboard, touch pad, display, memory, motherboard...going off the list they sent back, none of those were replaced), so I'm not sure what to think. Not even a factory reset. I'd love to know what the issue was, in case it comes up again but am happy that my laptop is once again functioning in either case!
-
Previewing Pages via Testing Server Unusable???
Hello,
I typically set up a local testing server during development.
When hitting F12, Dw uploads the current page to the testing
server, and then correctly shows that page in my browser. However,
Dw DOES NOT update the CSS file, and since most changes these days
are done in the linked/attached CSS file (even while editing the
main html page), this F12 preview in browser shortcut is unusable.
The only workaround I know of is to click on synchronize in
the files panel, click preview and then OK in two different dialog
boxes.
Does anyone know how to make Dreamweaver upload ALL dependent
files to the testing server upon pressing F12?There is a roundabout way to do this by using "upload files
on save",
but I would not recommend using that unless you are very good
about
making backups to all of your files.
Another solution would be to Preview in Browser using "Temp"
files.
HTH,
Randy
> I typically set up a local testing server during
development. When hitting
> F12, Dw uploads the current page to the testing server,
and then correctly
> shows that page in my browser. However, Dw DOES NOT
update the CSS file, and
> since most changes these days are done in the
linked/attached CSS file (even
> while editing the main html page), this F12 preview in
browser shortcut is
> unusable.
>
> The only workaround I know of is to click on synchronize
in the files panel,
> click preview and then OK in two different dialog boxes.
>
> Does anyone know how to make Dreamweaver upload ALL
dependent files to the
> testing server upon pressing F12?
Maybe you are looking for
-
How to write formula for 0calweek from 0calmonth
Hi Friends, I'm doing weekly report. my infocube, data coming from three sources, two sources are ODS. In ODS doesn't have 0calweek only have 0calmonth. When i see my report i can't view those ODS data in the report. So i want write a formula. How do
-
Plz help me to design the system......Its very urgent
Hi all members I have a problem and i am not able to start with the solution of this if all of u can help me to move with the solution of this problem I have to send the Java interfaces, and a brief write-up with assumptions and class-design. Challen
-
Hi. I have the following scenario: I want to send an e-mail from SAP ERP, using XI mail adapter. I would like to ask the experts if what I'm doing is correct: - In the Integration Directory I defined the following objects: 1) Business system "IED_200
-
Can't get client and server to communicate
hiya For some reason I can?t get server and client to exchange any messages ( server does receive a message from client only when I terminate the client process ). At first I thought that firewall was somehow preventing the two from communicating, bu
-
Insufficient Bandwidth continues ...
Does anyone still have this issue even with the latest version of Tiger and iChat? Some of my buddies I just can't connect with. This one in particular is based on 2 ADSL lines with 8Mb's downstream and 512kbps upstream so bandwidth really isn't an i