IDL does not support recursive definition??��previous topic is depreciated��

Question1��
interface A{
     typedef A AList[];
     attribute string name;
     attribute A aa;     //accepted by idlj,ok
     attribute AList aaList;     //idlj does not accept such syntax��how to define the attribute whose type is the array of Node,i.e. "Node[]" ??
Question2��
struct Node{
     string name;
     sequence<Node> children; //accepted by idlj,ok
     Node parent; //idlj does not accept such syntax��how to define the attribute whose type is Node itself??
Ur reply will be greatly appreciated!
Thanks a lot!

You could always define the parent to be a sequence as well.....
struct Node{
     string name;
     sequence <Node> children;
     sequence <Node> parents;
where the parents sequence would only be length 1 during rumetime....
/Paul.

Similar Messages

I'd like to go back to the previous version because vs does not support AVG search

Version 6 does not support the AVG search add-on, how do I get back to the previous version of Firefox?

Instead of Downgrading to a previous version, you can use - '''Web of Trust Safe Browsing Tool 20110704''' extension
* https://addons.mozilla.org/en-US/firefox/addon/wot-safe-browsing-tool/
Check and tell if its working.

Siri keeps telling me "your calendar does not support location-based reminders" when I ask her to remind me to feed the cat when I get home. My address is in contacts and it has worked previously. Did iOS 8 change something?

calendar does not support location-based reminders....
i Just found a similar question below and it resolved my issue. Turn off the sync to exchange email and all works fine now.

Couldn't agree more. I've been *trying* to use location reminders ever since buying my iPhone 4S but as yet, out of many, many attempts they've only actually worked once.
The kid problem is very simple, the way the phone needs the location to be an address in your address book, and it's subsequent inability to correctly locate the address. My home address is a correct postal address, and has been unchanged for 40+ years, yet clicking on my address from my own contact entry puts my location some distance down my street.
Whilst I understand the issue with the address lookup, it seems to be a massive problem with the location based reminders as it's just not possible to set useful reminders.
What if I want to remind myself of something when I arrive at the car park on a shopping trip? There is no address for that in my contacts, I just want to pinpoint the location on the maps and say 'remind me when I get there'. Surely that's the simplest my far. Same with address book contacts, if you had a field with the gps position in then one could tag the locations and know they were 100% accurate for location services.
Such a shame as it's one of the key reasons I upgraded my phone and as it stands it just plain doesn't work.

SQL Developer does not support Oracle 8i

Hi,
I was waiting a tool from Oracle like SQL Developer for a long time, finally it came, but I am a little disapointed, so Why SQL Developer does not support Oracle 8i? Other free tools like SQUIRREL can do it. I also have worked in previous projects using PL/SQL Developer and it works fine...Why a native Oracle tool can not do it?
I am in a project where we have to upgrade the Oracle database to a newer version, but I cannot have access to the old one...
I know there are some threads in this forum, and some people can work with 8i with no issues. Can anyone who works with SQL Developer and Oracle 8i please tell me how to do it?
Thanks,
--Javier
Edited by: javierlarota on Dec 9, 2009 5:40 AM
Edited by: javierlarota on Dec 9, 2009 5:41 AM

That's what I thought, the issue is more commercial ($$$) than technical. Anyway...I downloaded the version 1.1 but now I am getting an ORA-02248: invalid option for ALTER SESSION error. 00604. 00000 "error occurred at recursive SQL level %s".
Thanks,
--Javier

BEA AquaLogic User Interaction product does not support LINUX

Hi all,
I realised that ALUI does not support installation for LINUX.(pls see download link at http://commerce.bea.com/showproduct.jsp?family=ALI&major=6.1&minor=0).Does anyone know the plans about this topic?What is BEA's roadmap?

ALUI does currently support Linux (both Red Hat & SuSE) with the the 6.0 SP1 version. The latest version (i.e. 6.1) will support Linux when the first Service Pack for 6.1 is released - tentatively scheduled for the first half of next year. ALUI 6.1 currently supports Windows, Solaris & AIX.
ALUI 6.1 is aligned with how BEA licenses other products where the product is essentially available to download and install for an evaluation period for free. Previous versions of ALUI (including 6.0 SP1) are only available for download for paying customers or partners. Correspondingly, only paying customers or partners can log into the ALUI support site.
The UI Customization Installer for 6.1 (for Windows) is currently available for download and eval from http://commerce.bea.com/showproduct.jsp?family=ALI&major=6.1&minor=0
john

[290x] MSI Gaming App error "The platform does not support this application."

Using the latest AMD Omega drivers, I am unable to launch the Gaming App and am presented with this error - "The platform does not support this application."
I have tried downloading Gaming APP 3.0.0.16.zip from another post on the topic but I am receiving the same error. The only other thing I've seen as a 'solution' is to install the drivers from the MSI support page for my card - however this is version 14.4 and is over 3 months old, I don't really think that's a viable solution.
Any ideas?
Thanks!

Quote from: JLio01 on 07-January-15, 11:55:18
Is your vga driver 14.12? Any other settings changed?
Do you have any other msi or vga software installed?
Can you do a fresh re-install OS and what's the language of your OS?
Yes, Catalyst Omega. No other software or hardware changes.
Yes MSI Afterburner. Have tried uninstalling and installing gaming app, have also not had it running when trying to launch MSI Gaming app. No joy there.
No I can't, that's not really an option for a piece of software like this which worked before but doesn't since the latest AMD driver updates.
Quote from: JLio01 on 07-January-15, 16:07:38
Since your motherboard is not the supported gaming series mobos, there might be something detected wrong with your card. The error message shown if neither motherboard nor vga is supported in Gaming App. I suggest use AMD Catalyst Clean Uninstall Utility to totally uninstall the current driver:
http://www.techspot.com/drivers/driver/file/information/16748/
and re-install the latest driver 14.12. I have no problem using Gaming App 3.0.0.16 with my R9 290X, hope you too.
I have never seen anything stating that you need a supported gaming series motherboard to use the MSI Gaming App - maybe for other features if it has any, but the gaming app I used when I got my card was a little box with a few options for the GPU on it. Tried uninstalling and reinstalling the driver already unfortunately, using both AMD CCUU and a second attempt with DDU. No change at all, the exact same error message.
But as I've said, the fact that there is more than one person reporting this and older drivers make the gaming app work, it's definitely a software ended problem on certain configurations. I have installed driver 14.4 now and can once again use the gaming app, just as someone with a different card and different motherboard has stated in another thread. xxhttps://forum-en.msi.com/index.php?topic=251885.0xx this solution however is not really acceptable.

"...does not support this type of alias."

I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
Lloyd

Barry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd

Help Solving: Does not contain a definition for 'Select'.....

Hi,
Need help solving a Task that returns a Task<IEnumerable<Writing>> so I can fill ObservableCollection<ViewModels.IWritingItemViewModel> Writings for my
Design Time Data Page:
<d:Page.DataContext>
<designTimeData:MainPageViewModel />
</d:Page.DataContext>
My constructor does this:
public MainPageViewModel()
var writings = this.GetGroupsAsync();
this.Writings = new ObservableCollection<ViewModels.IWritingItemViewModel>();
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
My var writings = this.GetGroupsAsync(); is:
public async Task<IEnumerable<Writing>> GetGroupsAsync()
await this.GetMenuDataAsync();
return this.Groups;
which in turn gets data from:
private async Task GetMenuDataAsync()
Uri dataUri = new Uri("ms-appx:///DesignTimeData/MenuData.json");
StorageFile file = await StorageFile.GetFileFromApplicationUriAsync(dataUri);
string jsonText = await FileIO.ReadTextAsync(file);
JsonObject jsonObject = JsonObject.Parse(jsonText);
JsonArray jsonArray = jsonObject["Groups"].GetArray();
foreach (JsonValue groupValue in jsonArray)
JsonObject groupObject = groupValue.GetObject();
Writing group = new Writing(
groupObject["UniqueId"].GetString(),
groupObject["IsHeaderInteractive"].GetBoolean(),
groupObject["ViewType"].GetString(),
groupObject["ModelType"].GetString(),
groupObject["Page"].GetString(),
groupObject["Title"].GetString(),
groupObject["Subtitle"].GetString(),
groupObject["ImagePath"].GetString(),
groupObject["Description"].GetString(),
groupObject["GroupId"].GetString()
foreach (JsonValue itemValue in groupObject["WritingMenus"].GetArray())
JsonObject itemObject = itemValue.GetObject();
group.WritingMenus.Add(new WritingMenu(
itemObject["UniqueId"].GetString(),
itemObject["Page"].GetString(),
itemObject["Title"].GetString(),
itemObject["Subtitle"].GetString(),
itemObject["ImagePath"].GetString(),
itemObject["Description"].GetString(),
itemObject["Content"].GetString(),
itemObject["WritingsId"].GetString(),
itemObject["GroupId"].GetString(),
Convert.ToInt32(itemObject["Item"].ValueType)
this.Groups.Add(group);
and I get this Error:
Error 5 'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a using directive or an assembly reference?)
I'm creating collections of:
public interface IWritingItemViewModel : Common.IVariableSizedItem
Models.Writing Writing { get; set; }
and my class for creating data is:
public class Writing
public Writing(
string uniqueId,
bool isHeaderInteractive,
string templateType,
string viewModelType,
string page,
string title,
string subtitle,
string imagePath,
string description,
string groupId
this.UniqueId = uniqueId;
this.IsHeaderInteractive = isHeaderInteractive;
this.TemplateType = templateType;
this.ViewModelType = viewModelType;
this.Page = page;
this.Title = title;
this.Subtitle = subtitle;
this.ImagePath = imagePath;
this.Description = description;
this.GroupId = groupId;
this.WritingMenus = new ObservableCollection<WritingMenu>();
public string UniqueId { get; private set; }
public bool IsHeaderInteractive { get; private set; }
public string TemplateType { get; private set; }
public string ViewModelType { get; private set; }
public string Page { get; private set; }
public string Title { get; private set; }
public string Subtitle { get; private set; }
public string ImagePath { get; private set; }
public string Description { get; private set; }
public string GroupId { get; private set; }
public virtual ObservableCollection<WritingMenu> WritingMenus { get; private set; }
How can I solve or successfully complete this code?
Thanks!...
Code is like a box of chocolates!...

I looked into your error message again, I found something interesting:
Error 5
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition
for 'Select'
and no extension method
'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a
using directive or an assembly reference?)
That means: Task does not contain the definition for Select. This was reasonable, Task does not inherit IEnumerable interface.
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
public async Task<IEnumerable<Writing>> GetGroupsAsync()
You need get the IEnumerable<Writing> for Select use. See this for more information:
How to: Return a Value from a Task
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Xdb_installation_trigger does not support object creation of type SNAPSHOT

hi everyone, i'm using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit on solaris sparc 5.10
we like to send an email through SSL, and after searching here and there I found out that oracle DB 11g able to go throught the SSL.
since upgrade our DB to 11g would not be an option, so i tried to export XDB of 11g and import it into XDB 10gR2 schema, it was a mess...
then i just reinstall XDB using catnoqm.sql & catqm.sql
and now one of our programmer cant run some script like above
CREATE MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY
TABLESPACE MARKETING_TABLES
PCTUSED    40
PCTFREE    10
INITRANS   2
MAXTRANS   255
STORAGE    (
INITIAL          64K
MINEXTENTS       1
MAXEXTENTS       UNLIMITED
PCTINCREASE      0
FREELISTS        1
FREELIST GROUPS 1
BUFFER_POOL      DEFAULT
+)+
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
WITH PRIMARY KEY
AS
+/* Formatted on 9/23/2010 1:07:42 PM (QP5 v5.114.809.3010) */+
SELECT   coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date,
SUM (scheme_adm) scheme_adm,
SUM (appl_unit) appl_unit,
SYSDATE mkt_sysdate
FROM   (SELECT   NVL (a.coy_id, '01') coy_id,
a.branch_id appl_branch_id,
DECODE (a.buss_unit, 'NMC', '2101', 'UMC', '2102', '2352')
appl_object_code,
a.platform product_type,
TRUNC (c.contract_active_date) ppdcf_paid_date,
NVL (s.ms_amt, 0) scheme_adm,
NVL (o.total_item, 0) appl_unit
FROM   ordmgmt.om_trn_appl_ms_lvl_object s,
ordmgmt.om_trn_appl_hdr a,
acctmgmt.ar_trn_sum_contracts c,
+( SELECT appl_no, COUNT ( * ) total_item+
FROM   ordmgmt.om_trn_appl_object
GROUP BY   appl_no) o
WHERE       s.appl_no = a.appl_no
AND a.appl_no = o.appl_no
AND s.ms_code IN ('MS03', 'MS14')
AND c.appl_no = a.appl_no
AND c.contract_no = a.contract_no
+/*AND c.office_code = a.branch_id*/+
AND NVL (a.coy_id, '01') = NVL (c.coy_id, '01'))
GROUP BY   coy_id,
appl_branch_id,
appl_object_code,
product_type,
ppdcf_paid_date;
COMMENT ON MATERIALIZED VIEW FIFSYS_MKT_SCHEME_MV_COY IS 'snapshot table for snapshot MARKETING.FIFSYS_MKT_SCHEME_MV_COY';
and this error shown:
ORA-00604 error occurred at recursive SQL level 1
ORA-20000 Trigger xdb_installation_trigger does not support object creation of type SNAPSHOT
ORA-06512 at line 32
maybe some of you know how to solve this problem??
and, this in the script of the xdb_installation_trigger
DROP TRIGGER SYS.XDB_INSTALLATION_TRIGGER;
CREATE OR REPLACE TRIGGER SYS.xdb_installation_trigger
BEFORE
CREATE ON DATABASE
DECLARE
sql_text varchar2(200);
val number;
BEGIN
if (dictionary_obj_owner != 'XDB') then
if (dictionary_obj_type = 'FUNCTION' or
dictionary_obj_type = 'INDEX' or
dictionary_obj_type = 'PACKAGE' or
dictionary_obj_type = 'PACKAGE BODY' or
dictionary_obj_type = 'PROCEDURE' or
dictionary_obj_type = 'SYNONYM' or
dictionary_obj_type = 'TABLE' or
dictionary_obj_type = 'TABLESPACE' or
dictionary_obj_type = 'TYPE' or
dictionary_obj_type = 'VIEW' or
dictionary_obj_type = 'USER'
+)then+
if (dictionary_obj_type != 'PACKAGE BODY'
+) then+
sql_text := 'select count(*) from ALL_OBJECTS where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
sql_text := 'select count(*) from dropped_xdb_instll_tab where owner = :1 and object_name = :2 and object_type = :3';
execute immediate sql_text into val using dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type;
if (val = 0) then
insert into xdb_installation_tab values
+(dictionary_obj_owner, dictionary_obj_name, dictionary_obj_type);+
end if;
end if;
end if;
else
raise_application_error(-20000, 'Trigger xdb_installation_trigger does not support object creation of type '||dictionary_obj_type);
end if;
end if;
end;
+/+
/********************************************************************************/

i'm so careless, after checking a fresh installation of the same version DB, i dont found xdb_installation_trigger.
so just by simply remove that trigger & everything works just fine. :)

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

JDeveloper 11.1.2.3, ADF Faces: declarative component does not support af:clientListener?

I am trying to create a declarative component with the following code:
<?xml version='1.0' encoding='UTF-8'?>
<af:componentDef xmlns:af="http://xmlns.oracle.com/adf/faces/rich" var="attrs" componentVar="comp" definition="private"
                 xmlns:afc="http://xmlns.oracle.com/adf/faces/rich/component">
    <af:xmlContent>
        <afc:component>
            <afc:display-name>DoubleClickTableDialogClientServerListener</afc:display-name>
            <afc:component-extension>
                <afc:component-tag-namespace>org.mskcc.crdb.common.declarativecomponent</afc:component-tag-namespace>
                <afc:component-taglib-uri>http://www.mskcc.org</afc:component-taglib-uri>
            </afc:component-extension>
        </afc:component>
            <af:clientAttribute name="serverListenerType" value="TableDoubleClickEvent"/>
            <af:clientListener method="handleTableDoubleClick" type="dblClick"/>
            <af:serverListener type="TableDoubleClickEvent"
                               method="#{EditAddDialogTemplateBean.handleTableDoubleClick}"/>
    </af:xmlContent>
</af:componentDef>
At runtime I recieve the following error:
javax.faces.view.facelets.FaceletException: ADF_FACES-60023:Component: DoubleClickTableDialogClientServerListenerComponent[oracle.adf.view.rich.component.fragment.UIXInclude$ContextualFacesBeanWrapper@7170a7, id=dctdcsl1] does not support client listeners.
at oracle.adfinternal.view.faces.facelets.rich.BaseClientListenerHandler.apply(BaseClientListenerHandler.java:53)
This component was intended to be dropped off within an af:table component. I would like to hear suggestions on workarounds, one other way I thought about was to create a code template for the three tags, however, the con to this approach is each developer would need to configure this template within jdeveloper. Ideas are appreciated.
Also a side question, how can I embed code properly with the new forum? [code] tag does not seem to work now.

Wes, can't help with the real question, but can tell you how to format code
Change to the advanced editor (top right over the editor field), then you get more options. The one you are looking for is behind the blue '>>'. Here you select the language you want to insert and you get nice code formatting and color.
Timo

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

[unixODBC][Driver Manager]Driver does not support this function {IM001}

Hello,
I start from the end and details show below - this error message i got in sql session:
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
If its ok and HS are licensed for SE, then please see details of my problem:
----OS and packages version
[oracle@aris_sv_db log]$ uname -a
Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ rpm -qa | grep odbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
unixODBC-libs-2.2.11-10.el5
unixODBC-libs-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
unixODBC-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
[oracle@aris_sv_db log]$ rpm -qa | grep freetds
freetds-0.91-1.el5.rf
[oracle@aris_sv_db log]$
-----ODBC.INI, ODBCINST.INI and FREETDS.CONF
[oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
[ENERGOPLAN]
Driver = FreeTDS
Servername = ENERGOPLAN
Database = ess2
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/odbcinst.ini
# Example driver definitions
[FreeTDS]
Description = MSSQL Driver
Driver = /usr/lib64/libtdsodbc.so.0
#Setup = /usr/lib64/libtdsodbc.so.0
#Driver = /usr/lib64/libodbc.so
#Driver = /usr/lib/libodbc.so
UsageCount = 1
Trace = Yes
TraceFile = /tmp/freetds.log
[ODBC]
DEBUG = 1
TraceFile = /tmp/sqltrace.log
Trace = Yes
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/freetds.conf
# A typical Microsoft server
[ENERGOPLAN]
host = 192.168.10.64
port = 1433
tds version = 8.0
# client charset = UTF-8
client charset = cp1251
[oracle@aris_sv_db log]$
----CHECK CONNECT from ODBC
[oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select count(*) from EnergyType;
| |
| 8 |
SQLRowCount returns 1
1 rows fetched
SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "cp1251"
1> select count(*) from EnergyType;
2> go
8
(1 row affected)
1> [oracle@aris_sv_db log]$
----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_ENERGOPLAN =
(SID_LIST =
(SID_DESC=
(SID_NAME=ENERGOPLAN)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
ENERGOPLAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ENERGOPLAN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
(CONNECT_DATA=(SID=ENERGOPLAN))
(HS=OK)
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = ENERGOPLAN
#HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
HS_FDS_TRACE_LEVEL = DEBUG
#HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
#HS_LANGUAGE=american_america.we8iso8859p1
#HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
#HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
#HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
#HS_LANGUAGE=Russian_CIS.AL32UTF-8
#HS_FDS_FETCH_ROWS=1
HS_NLS_NCHAR = UCS2
HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
set ODBCINSTINI=/etc/odbcinst.ini
#HS_KEEP_REMOTE_COLUMN_SIZE=ALL
#HS_NLS_LENGTH_SEMANTICS=CHAR
#HS_FDS_SUPPORT_STATISTICS=FALSE
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tnsping ENERGOPLAN
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
OK (0 msec)
[oracle@aris_sv_db log]$
----CREATE DBLINK and test from sqlplus
CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
[oracle@aris_sv_db log]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
----logs from hs and odbc
[oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
-7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
Free hoada @ 0x14e5fd20
Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
type:0
SQL text from hgopars, id=1, len=36 ...
00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
20: 22204131 [" A1]
Exiting hgopars, rc=0 at 2013/04/01-16:30:42
Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
Allocate hoada @ 0x14e5fd80
Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
Entered hgopcda at 2013/04/01-16:30:42
Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
Entered hgopoer at 2013/04/01-16:30:42
hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
[unixODBC][Driver Manager]Driver does not support this function {IM001}
Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
Free hoada @ 0x14e5fd80
hgodscr, line 464: NO hoada to print
Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
Entered hgocomm at 2013/04/01-16:31:24
keepinfo:0, tflag:1
00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
10: 32322E37 363237 [22.7627]
tbid (len 20) is ...
00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
10: 312E345D [1.4]]
cmt(0):
Entered hgocpctx at 2013/04/01-16:31:24
Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
Entered hgolgof at 2013/04/01-16:31:24
tflag:1
Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
Entered hgoexit at 2013/04/01-16:31:24
Exiting hgoexit, rc=0
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
Native = 0x7fff6ca974f4
Message Text = 0x14e5f968
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_SUCCESS]
SQLState = IM001
Native = 0x7fff6ca974f4 -> 0
Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
[ODBC][12117][SQLGetDiagRecW.c][540]
Entry:
Statement = 0x14e399f0
Rec Number = 2
SQLState = 0x7fff6ca97700
Native = 0x7fff6ca974f4
Message Text = 0x14e5f908
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_NO_DATA]
[ODBC][12117][SQLEndTran.c][315]
Entry:
Connection = 0x14dbd4b0
Completion Type = 0
[ODBC][12117][SQLGetInfo.c][214]
Entry:
Connection = 0x14dbd4b0
Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
Info Value = 0x7fff6ca9781e
Buffer Length = 8
StrLen = 0x7fff6ca9781c
[ODBC][12117][SQLGetInfo.c][528]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLEndTran.c][488]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLDisconnect.c][204]
Entry:
Connection = 0x14dbd4b0
[ODBC][12117][SQLDisconnect.c][341]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][268]
Entry:
Handle Type = 2
Input Handle = 0x14dbd4b0
[ODBC][12117][SQLFreeHandle.c][317]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][203]
Entry:
Handle Type = 1
Input Handle = 0x14dbb0c0
[oracle@aris_sv_db log]$

To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
- Klaus

How do I download adobe flash player on my iPad safari does not support this ap?

How do I download adobe flash player on my iPad, I keep getting messages that safari does not support the ad?

There is no Flash Player for iOS, a decsion Apple has made.
[topic moved to Flash Player forum]

Pages 5.0 version does not support pictures in header

I recently installed new soft OS X Maverick and along with this also renewed soft for Numbers, Pages, Keynote, and some more apps.
Pages version 5.0 does not support its earlier version pre-set headers and footers. All the logos (picture files) I had inserted for my company template in the header are gone and I cannot re-enter them either. Does anyone can give e a hint on how to use picture files in Pages version 5.0 templates?
This is first time in 2+ years that I prefer to use MsWord over Pages on my Mac, which is a pity.
*I have tried to get used to new soft versions of numbers and pages now for around 3 weeks but it cannot make me to change my opinion that the eralier versions were much better. Unfortunately with OS X Maverick I have to use new versions for these apps, or do I, any hints?
I already deleted once (2 weeks ago) OS X Maverick and switched back to OS X Mountain Lion (I use TM), but then decided after while to still update the op system soft to newest one available, as I've hoped that developers in Apple will come up with their soft improvements and bug fixes soon enough.
Among the other disomforts (like pages, numbers and changed tag system) Safari is much slower than with previous version.
Any hints are appreciated!
Thanks, Paul

https://discussions.apple.com/message/21546508#21546508 check this out

IDL does not support recursive definition??��previous topic is depreciated��

Similar Messages

Maybe you are looking for