Idle timeout for cisco anyconnect vpn client

Hi All,
Can you please let me know how to set idle timeout for the cisco vpn client, I configured the idle timeout setting under the group policy for the ssl vpn but it is not making any difference, is there any bug in asa firmware ? but I am using the latest version 9.3(2) now but this change is not taking any effect.
Please let me know if you need more information, config etc ?
Thanks

Hi Alex,
That file is indeed subjected to the same download restrictions than the other Anyconnect client files. You should contact the person who provided you with the Anyconnect client installer, or who is managing the ASA that you are connecting to, asking her/him to get the file and provide it to you - that person should have the necessary access rights.
Alternatively there is a command line interface executable provided as part of the Anyconnect client, which can return tunnel statistics (among which tunnel status) - invoking that program and parsing the output should be doable from pretty much any programming/scripting tool - not the most optimal approach in C++ though, but you wouldn't need anything else than what is provided with the client software.
The executable is with the other Anyconnect client files and is named vpncli.exe.
Try vpncli -h to get the argument syntax.
I hope it helps, please let me know.
Best regards,
Christophe

Similar Messages

Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN

Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,

Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given.

Trouble with Cisco Anyconnect VPN Client

Hello,
our Cisco AnyConnect VPN Client has stopped working, we are a medical office and we are attempting to connect to "clientvpn.e-mds.com" however it will not connect, the username and password we input are irrelevant it doesnt come up with a "wrong credentials" window it just erases the password and at the bottom of the window it says "Please enter your username and password". our version is 2.5.0217 does anyone know anything to try? any help would be appreciated

you may want to try the OS X networking forums:
http://discussions.apple.com/forum.jspa?forumID=733

Problem using SunRay with Cisco AnyConnect VPN Client

I am using Cisco AnyConnect VPN Client Version 2.5.3046
I have a PC and a SunRay connected to my router. I use VPN to connect my SunRay and my PC to my work computer. My PC works fine, I am able to connect to the internet and also run cisco VPN to connect to my work computer. But when I try to use my SunRay, I get a window on the screen with the message:
VPN IKE Phase 1 agg I msg1This window keeps moving around on the screen. I am not able to connect my SunRay through VPN to my work computer. Any idea what could be wrong and how I can fix this?

2.2 is definitely better.
On one PC, I'm fine. On another -- very similar -- it tells me it can't start the VPN even after uninstalling and re-installing and everything else I can think of, with plenty of re-boots inbetween.
Aaaaarrrrrrggggggghhhh.

Cisco AnyConnect VPN client and 256 AES encryption in IE8

Hey,
We have a site that we are trying to connect to with the AnyConnect VPN client version 2.5.3055 on Windows XP SP3. As soon as we enter the site info and hit select, it says a connection was unable to be established.
I believe this has to do with the encryption, its set up with 256 bit AES. We are only able to install IE8, which on XP only supports up to 128 bit encryption, so in IE8 the page will not load. To fix that issue we installed firefox which supports 256 bit encryption. We can get to the page there, but when we go to connect to the same site VIA the VPN client it still will not connect. It will work fine on a windows 7 box with IE9 installed from the same network.
My question mainly pertains to how the AnyConnect client connects on the back end. Does it use Internet explorer's SSL layer by default? Or does it have its own? If it connects through internet explorer, is there a way to change it to firefox so it will actually be able to open up a connection?
Thank you for your answers in advance,
John

Hey Jeff,
Thanks for answering that question. Hmm, so it doesnt go through the browsers SSL layer. We have systems on the same network (same proxy, firewall, vlan, etc). All the systems with windows XP SP3 and IE8/IE7 can not connect to the VPN (they arent even able to start the connection and ask for proxy/logon info.), all the systems with windows 7 and IE9 can. Same setups on each one as far as the security policies go as well. I thought it may have to do with the 256 bit encryption that they are using.
If thats not the case, what else could be causing the problem? weve tested it on about 5 XP machines and 5 Win 7 machines, same results on each. Connects on Win 7, does not connect on Win XP.
Thanks,
John

Issue with Mac OS 10.8.3 and Anyconnect VPN Client 3.1.02026

Hi all,
I am running Anyconnect VPN Client 3.1.02026 on Mac OS X 10.8.3. I am unable to connect to my corporate network as the connection fails with following error :
The VPN client was unable to successfully verify the IP forwarding table modifications. A VPN connection will not be established.
Can anyone suggest remedies. I am completely stuck. I had an older AnyConnect client and it was working until a few days back when it stopped working. I then upgraded to 3.1.02026.
As suggested in some of the pots on the web, i have disabled the following AirPort, Bonjour, Bluetooth, Adium, restarted after these changes and yet i am seeing this.
My company has corporate license for Cisco AnyConnect VPN.
TIA
kumar

MartyP wrote:
Or is there a problem with both OS's writing stuff to the
~/Home/Library folder that may be incompatible?
Yes, big time. Mail, for sure, has a different file/folder structure, and would not be happy.
Plus, a number of apps (Apple and 3rd-party) are "Sandboxed." That's a security feature, to prevent malware or bad coding from affecting things it shouldn't. Some of their files, including the preferences files, aren't even stored in the same places!
Or to other places I'm not aware of?
Probably. If you have two versions of the same app, they may or may not expect the same data setup.
To have one User folder for both OS's would save a lot of drive space
Not if you use some or all of woodmeister50's suggestions.
But I'm also not sure how I'd use Time machine with such a set up.
Just as you do now. By default, Time Machine backs-up everything (except things like system work files, most caches and logs, trash) for all users and all internal drives & partitions. By default, it excludes external drives.
You can change those defaults, of course, via TM Preferences > Options.
See Time Machine - Frequently Asked Question #32 for details and considerations of multiple drives.
Presently I backup with . . . clones to other HD's
Good. Yes, clones are different. You need multiple "tasks" to back up multiple drives/partitions. But once set up, that shouldn't be a big deal.

Cisco AnyConnect VPN won't install, says There is a newer version of the AnyConnect client already installed

I had an issue with my Cisco Anyconnect VPN not working, so uninstalled it. I've tried a new install and now I get the message "There is a newer version of the AnyConnect client installed" and it won't tell me install it at all. I've gone through various recommendations on the site included this :-
Go to "Regedit" and search for "Deterministic Networks" and delete it.
HKEY_LOCAL_MACHINE \SOFTWARE\Deterministic Networks
Search with the following keywords in the registry, under "Uninstall" or "Components" folders and delete any related entries.
Vpnapi
Vpngui
Cisco
CVPND
CVPNDRA
Ipsecdialer
Source: https://supportforums.cisco.com/message/3728011#3728011
But I've still got the same problem, and just cant find anything to help !

Disable Internet Connection Sharing (ICS) and then try You can disable ICS in two ways:
Per Adapter:
Click the Start button.
Click on Control Panel.
Click on View Network Status and Tasks
Click on Change adapter settings
Right-click the shared connection and choose Properties
Click the Sharing tab
Clear the Allow other network users to connect through this computer's Internet connection checkbox
Click OK
System Wide:
Click the Start button (Windows' orb)
Type: services.msc and press ENTER
Double-Click on Internet Connection Sharing (ICS)
Change Startup Type to Disabled
Reboot the computer
You can now try reinstalling the WiscVPN client again

Unable to unistall Cisco AnyConnect VPN - please help

I have upgraded to Windows 8.1 preview on my Surface Pro. My Cisco AnyConnect VPN stopped working. When I uninstalled the software it left the ‘Cisco AnyConnect VPN Virtual Miniport Adapter for Windows x64’ under the network adapters in Device Manager. No matter what I do, I cannot uninstall it from there. I tried everything including uninstalling in safe mode. I says it uninstalled but still appears there. I believe because of this, my internet connection performance has decreased tremendously. It also disconnects and reconnects sometime after. My other computers work perfectly with maximum speed.
Please Help.
Thanks,
Mike

Windows Event Log detail as follows:
Faulting application name: vpnagent.exe, version: 3.1.4066.0, time stamp: 0x52211732
Faulting module name: Dbghelp.dll, version: 6.3.9600.16520, time stamp: 0x52e690ac
Exception code: 0xc0000005
Fault offset: 0x00029132
Faulting process id: 0x1e74
Faulting application start time: 0x01d02328f37bd890
Faulting application path: C:\Program Files (x86)\Cisco\Cisco AnyConnect Secure Mobility Client\vpnagent.exe
Faulting module path: C:\Windows\SYSTEM32\Dbghelp.dll
Report Id: 31beb6d1-8f1c-11e4-8278-54271ebdf9a6
Faulting package full name:
Faulting package-relative application ID:

How to download anyconnect vpn client 64 bit win 7

Good day all,
please i wanted to download anyconnect vpn client 64 bit win 7 from software.cisco.com and i was not able to do that after login in. please can someone help me on how or the steps i can take to get the download.
secondly can i be able to install it using ASDM after the download because i do not have a tftp server for now. thanks

Hi csco12434455 ,
Try to go to the following link, the name of the file is: Web deployment package for Windows platforms.
This file does support W7 32 and 64 bits
https://software.cisco.com/download/release.html?mdfid=286281272&flowid=72042&softwareid=282364313&release=3.1.06073&relind=AVAILABLE&rellifecycle=&reltype=latest
Reference link:
http://www.cisco.com/c/en/us/td/docs/security/asa/compatibility/asa-vpn-compatibility.html#47680
And yes you can use ASDM to upload the file to the ASA flash , just go to Tools > File managment.
Please rate helpful posts !
Hope it helps
- Randy -

CiscoSystems AnyConnect VPN Client 3.0.3054 Posture module

Hello,
I have aproblem installing the posture module of AnyConnect VPN Client. During the installation I get an error:
"Product: Cisco AnyConnect Posture Module -- Error 1335. The cabinet file 'disk1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package."
I found out that this error appears when I'm installing from a local copy of the files from the ISO. If the installation is from a virtual drive it installs fine.
I need to install the client to multiple users so I have to use the source out of the ISO.
Is there a way to to install this module from HDD?
Thanks in advance!
Iliyan

Thanks for your reply.
The problem was because of brocken source.
I downloaded it from another location and everything is fine now
The discussion can be closed.

Cisco IPSec VPN Client and sending a specific Radius A-V value to ACS 5.2

This setup is to try routing Cisco VPN to either RSA or Entrust from Cisco ACS 5.2, depending on some parameter in incoming AUTH request from Cisco IPSec VPN Client 5.x. Tried playing with pcf files and user names/identity stores, none seems working

Hi Tony,
to the best of my knowledge this is currently not possible, but will be once this enhancement is implemented:
CSCsw31922 Radius upstream VSAs (Tunnel Group,Client type) for VPN policy decisions
You may want to try and ask in the AAA forum if there is anything you can do on ACS...
hth
Herbert

Vpn config for shrew soft vpn client

I wonder whether I am the only one having these problems.
I can't connect with my windows 7 home premium to Lion server vpn.
I can connect with it through my iphone, so the server works.
Since I am unable to change any security policy stuff I downloaded shrew soft vpn client.
But I can't find any documentation which settings the mac vpn system uses for the connection.
Hope someone can help me

Here is a sample configuration for Remote access VPN using Cisco IPSec VPN Client:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008060f25c.shtml

Configurate cisco ipsec vpn client at asa 5505 version 8.4

Hi dear. I want to configurate cisco ipsec vpn client at asa 5505. At my asa the software version is 8.4.
please provide me a link or some material to config ipsec vpn client at asa 5505 version 8.4
thank you.

are you looking for vpn client .pcf file or the configuration on ASA (ASDM) ?
what version of vpn client ?

Cisco AnyConnect VPN app on iPhone 4s won't connect

I have successfully installed the Cisco AnyConnect VPN app on my iPad Air and can connect to my target VPN. But the same app on my iPhone 4s won't work. When I try to connect I get this message: "Connect using Cisco AnyConnect App at least once before using any other App." I'm not trying to use another app, in fact I closed all other apps. I'm using the same settings as the Air. I tried with wi-fi, turned wi-fi off, location services on and off, etc. I'm on Verizon.
Has anyone got this to work on an iPhone?
Thanks

Although I agree that this is really a question for Cisco, finding/receiving an official answer there may take a while.
This app worked fine for me until I upgraded today - June 19, 2014 - the date of the release of Version 3.0.09430. After upgrade, I get the same message. The update note says "Apple IOS Connect On Demand Considerations - To ensure proper establish of Connect On Demand VPN tunnels after updating AnyConnect, users must manually start the Any Connect app and establish a connection. If this is not done, upon the next iOS system attempt to establish a VPN tunnel, the error message 'The VPN Connection requires an application to start up' will display."
But I too have tried various interpretations of that, and still get the error above quoted by azmilt.
It appears that either:
- the upgrade is faulty
- the version itself is faulty
- the directions for a proper upgrade need clarification
So if anyone has upgraded to this version, and made it work, I think that providing a procedure would help the community.

Cisco Systems VPN Client Version 5.0.03.0560 Errors

Hello I am getting the following errors on my
VPN Connection Attempts
Cisco Systems VPN Client Version 5.0.03.0560
Copyright (C) 1998-2007 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 3
Config file directory: C:\Program Files\Cisco Systems\VPN Client\
1      19:59:14.375 09/26/10 Sev=Warning/3 CVPND/0xA340000D
The virtual adapter was not recognized by the operating system.
2      19:59:14.375 09/26/10 Sev=Warning/2 CM/0xE310000A
The virtual adapter failed to enable
3      19:59:14.531 09/26/10 Sev=Warning/2 IKE/0xE300009B
Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
4      19:59:14.531 09/26/10 Sev=Warning/2 IKE/0xE30000A7
Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2238)

Please kindly check the following readme for VPN Client version 5.0.3.560:
http://www.cisco.com/web/software/282364316/22941/vpnclient-windows-5.0.03.0560.txt
Advisory:
The new client requires a kernel patch, KB952876, from Microsoft before installing first before installing the actual client.
REF: http://support.microsoft.com/kb/952876/en-us
Pls kindly check if you have kernel patch KB952876

Idle timeout for cisco anyconnect vpn client

Similar Messages

Maybe you are looking for