Idle?

Anyone know how to...or if its even possible in iChat to set it so that you never appear as idle? Both with an away up and without one up...
Anyone?

Hi Justin,
Have a look at this
Ralph

Similar Messages

  • Unable to capture the Idle time for BSP page

    Hi Experts,
    I want to capture the Idle time of my BSP page. If that is 5 mins then i have to display the pop up displaying the remaining time.
    Please let me know how to capture the IDLE TIME. not the time after the page is loaded.
    Any suggestion will be helpful.
    Aready checked in SDN but unable to get the solution so posting it.
    Thanks in advance.
    Sravanthi.V

    hi,
    After capturing the idle time iam giving the warning popup to user before 5mins of expiry.Now my requirement is if the user clicks on OK button of popup the page should get refresh. i.e.Idle time should of system should break and we have to get one more hour for expiry.
    Thanks in advance,
    Sravanthi.V

  • Windows always shows lock screen when idle, ignores setting

    On Windows 8, I had my computer set up so that the screen would turn off after a period of inactivity. When I would move the mouse or press a key, it would resume without asking me to log in. After upgrading to Windows 8.1, it is now always showing me the
    lock screen when resuming from idle. In the lock screen settings, I found a new option named "When my PC is inactive, show the locks screen instead of turning off the screen". I have disabled this setting, but my computer still locks every time the
    screen turns off.
    How can I get my computer to stop locking when it is idle?

    Hi,
    What about the settings in Screen Saver? Please check the Option "On resume, display logon screen" is unchecked.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CDAQ lock-up on Windows 7 when app idle.

    I scarse few details to help fix an issue I witnessed while on-site yesterday.
    A LV app running under Win 7 using a cDAQ chassis will lock-up LV if the app is left idle for a couple of hours.
    WHile Idle it just grabs samples from the AI chnnels and displays same.
    Attempts to open the FP of the sub-VI grabbing the samples locks-up so I was not able to check if there where hardware errors. memory was pegged out at the time.
    While monitoring the app for over an hour I saw no memory leaks and did not have time to wait for three hours or more so my facts are limitied.
    For the sake of this post I am only interested in finding out if others have seen cDAQ locking up when the app is idle.
    I did check the power save options and disabled the power saving feature for the USB but the isue did happena again after siting idle over-night.
    SO...
    Has anyone seen lock-ups of cDAQ ?
    Ben
    PS I added some logging to catch low-level errors when it happens again.
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

    tst wrote:
    Not locking up, but I have seen a cDAQ constantly throwing errors after plugging in (or, more likely, unplugging) a USB flash drive (Win XP in that case) and it only stopped after the cDAQ was turned off and back on. It seems to me that there are things happening in the USB stack/driver which the cDAQ doesn't always like.
    One thing you could try is looking the event log for Windows or search to see if there's a utility which would let you log USB events in the system. Assuming that's really the source of the issue (and it wouldn't shock me - your app might be stuck in the middle of a VISA call), then that might help to pinpoint it.
    Your sense that it is USB related was confirmed by the log file.
    I still have to follow-up with the customer to see if the issue is still re-occuring but the logged error indicated the buffer on the CDAQ backplne was over-flowing... NI Support found a KB article that explains that when doing highspeed I/O, and Windows going in to out of screen saver will stall the USB I/O long enough for the buffer to over-flow.
    Customer was going to work with NI Support to fiddle with Windows and shut-down all of the power-saving etc options that could get in the way.
    I THINK the error code was "-200361".
    Take care,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • RCA Connection Pool idle Time-Out takes no effect !

    My question description goes here.
    According to JCA specification, I developed my 'ManagedConnectionImpl' class from the interface 'ManagedConnection'. I realize the 'destroy()' function to send out logout request to the EIS.
    Then I deployed the connector in Sun Java System Application Server, I noticed there are two parameters in Connection Pool part, they are:
    1. Idle Timeout. It said it's the maximum time that a connection can remain idle in the pool. I assume the connection will be removed after the specific time expired and before it's removed it will call the recallable function, 'destroy()', in my concrete class, 'ManagedConnectionImpl'.
    2. Pool Resize Quantity. it said it's number of connections to be removed when pool idle time expired.
    I am weird about it. I think EIS had itself session control strategy, if the specific session time-out expired, it will invalidate this session. So I think we will set 'Idle Timeout' in application server to be shorter than the EIS session time-out. If the 'Idle Timeout' in application server expired, it should remove all connections inside otherwise maybe the connection with invalid session will exist! (the background knowledge is our system will return back soap fault when it meets invalid session, so the invalid connections will not be removed by switching on your configuration item, 'On Any Failure')
    So I set "inital and minimum pool size" to 8, "maximum pool size" to 32 and "Pool Resize Quantity" to 32. (I expect AS to remove all when pool idle time expired)
    After deploying, I send out requests at the first round and wait for the time expired but I can't see the desired logout requests from pool automatically even one. Firstly I guess if my recallable function definition is wrong but when I shut down the Application Server, the desired logout requests are sent out from pool automatically. So I think my recallable function definition is workable.
    What's your comments on it?
    P.S.
    I am using Sun Java System Application Server 8.1.
    Thanks in advance!
    BRs
    /Leo

    I have had following test to ensure I sent out notification to listener.
    [#|2005-08-23T16:14:25.061+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    It's in managed env!|#]
    [#|2005-08-23T16:14:25.062+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    enter matchManagedConnections() !|#]
    [#|2005-08-23T16:14:25.062+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    try to find a matching and existing one, reuse it!|#]
    [#|2005-08-23T16:14:25.062+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    Found a matching and existing one, reuse it!|#]
    [#|2005-08-23T16:14:25.495+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    tearDown() is called, the application-level connection is released!|#]
    [#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    enter calling close() of managed connection.|#]
    [#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    Start calling close() of managed connection.|#]
    [#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    start to notify the listener the completeness of connection.|#]
    [#|2005-08-23T16:14:25.496+0800|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.stream.out|_ThreadID=12;|
    notify the listener the completeness of connection successfully.|#]
    Whether it's related with the initial and minimum number parameter? Although I found it will not be created during AS start-up and will be created at the first request.
    Whether it shall be kept to meet the minimum requirement? I have failed to set it to 0.

  • After update 3.1 - 3G does not work after phone sits idle

    Updated from 3.01 to 3.1 - went smoothly, no problems. Restored my latest backup without issue. All is good. A few minutes later I tried to make a call and it failed. I tried to access the web - failed. Rebooted phone comes up as expected. Made a call, access to web working. 10 minutes later tried to make another call - failed; access to web failed again too. Switched over to Edge, rebooted. Calls and web access work. Waited 10-15 minutes, tried again; Edge still working. Switched back to 3G, rebooted. Same issue - calls/web work initially but after a short time, all calls and web access fail. I went through the 3.1 restore process again -- started over like it was a new phone. Again, the update worked without any issues/errors. I was able to restore my backup and all was good. But, same 3G problems occurred. So just for fun, I ran the Iphone config utility and captured the console log during a phone reboot sequence. After the phone booted up calls and web access were working with 3G. Then, let the phone sit idle for a while and saw these event occur in the log; the first 5 entries were made when I successfully sent a text message. After that message was sent I let the phone sit for a while. The next couple of entries were interesting. After the 'deactivated PDP context' messages appeared I could no longer make calls or access the web with 3G. Anyone else see this?
    I never ever had this problem with 3.01 software.
    Sat Sep 12 09:04:58 unknown com.apple.SpringBoard[25] <Notice>: told to send sms 867
    Sat Sep 12 09:04:58 unknown CommCenter[29] <Notice>: queuing sms message with id 867
    Sat Sep 12 09:04:58 unknown SpringBoard[25] <Error>: mms: queued messageId 867
    Sat Sep 12 09:05:00 unknown com.apple.SpringBoard[25] <Notice>: internalID: [867]
    Sat Sep 12 09:05:00 unknown com.apple.SpringBoard[25] <Notice>: notifying clients of event: 2 (recordID: 867)
    Sat Sep 12 09:07:02 unknown CommCenter[29] <Notice>: Deactivating PDP context 1, because it has gone idle.
    Sat Sep 12 09:07:43 unknown CommCenter[29] <Notice>: Deactivated PDP context 1 that supports connection types 0x2
    Sat Sep 12 09:07:43 unknown configd[23] <Notice>: network configuration changed.
    Sat Sep 12 09:07:43 unknown configd[23] <Notice>: CaptiveNetworkSupport:CaptiveHandlePrimaryChanged:2034 new primary: 67DCB7A6-30F5-4ECE-8FBB-5FC1DA71276D on pdp_ip0

    I thought I'd post you a quick response because you described exactly the issues I was having. After my phone was idle for a while, my iPhone would refuse to get data over 3G.
    I've tested this thoroughly and I'm able to "trip up" the phone into a state where it can't download data from the 3G network. But turning airline mode on for about 30 seconds then off again resets forces a renegotiate with the cell tower/3g and everything seems to work again about a minute later.
    Nothing untoward listed in the console at this point either - The PDP context that you mentioned that was deactivated was more than likely the Internet Tethering. (It's usually PDP context 1, by the looks of things).
    I think I might switch off 3G and see if that helps until Apple fix this issue. It is related to the wifi issues that others have reported - As I've seen my iPhone unable to download information via 3G if wifi is turned on, but you don't connect to a wifi network. But I can't seem to reproduce this reliably.
    -Soen

  • Dell Venue 11 Pro 7140 WiFi becomes disconnected during idle or waking from sleep

    I have a Dell Venue 11 Pro 7140 in which the wi-fi consistently becomes disconnected when either the tablet is idle for a period of time, or if it has woken from sleep. Period of time varies -- more than 5 minutes, but less than an hour.
    When wi-fi connection is lost, the only way to connect again is to reboot. Not much of a solution. USB 3.0-to-Ethernet adapter is rock-solid, but there isn't much point in having a tablet if you can't be wireless at some point.
    Things I've tried:
    - Optimized the intel driver settings roaming agressivenes: medium-low, Throughput booster: enabled, Transmit Power: highest.
    - toggling airplane mode, disabling/enabling via Network Connections
    - creating a custom wireless profile
    Really, not sure what I can try next. I've used other Windows 8.1 Pro laptops, and none of them have been this spotty.
    If anyone has a solution out there, I'm game to try. Otherwise, I'll be returning this back to Dell as a defective product. There seems to be issues about earlier versions of the Venue 11 Pro, but I haven't been able to find much on the 7140 version.
    Fully updated Windows 8.1 Pro. Using Intel dual-band Wireless AC 7265 adapter with v17.13.11.5 of the driver. BIOS version A03.

    Hi Jennifer,                                                                                                        Saturday 4th April 2015
    This whole process from order date 14th March 2015 to now has been frustrating, my mistake was to get one of the sales consultants on chat to check the saved cart, had compatible accessories for this tablet. From then on, after multiple quotes in the end he still managed to get the address wrong and missed putting screen protector on the order, multiple emails and phone calls the following week finally got address changed but couldn't get screen protector added to order in the end I ordered it over the internet. I should have cancelled order when I wanted to.
    What should have been a simple process is now a nightmare the Tablet with screen protector needs to be replaced has not worked properly since unboxing and first switch on , spent many hours of installing updates, contacted technical assistance last Thursday they did a remote hookup changed some things worked for a little time.
    Totally disappointed
    Leigh
    PS update 7th April 2015 started factory reinstall last Friday reinstalled all recomended updates more wasted time tested over weekend WiFi still not working after sleep mode. When I check for new updates keeps asking to reinstal theses 2 updates already done, reinstal them over and over still tells me to update them, second file fails to instal have to manually instal O2 Micro file searches wrong place for missing component.
    "Automatic updates
    These updates can be installed automatically.
    Intel(R) Management Engine Components Installer View full driver details
    Chipset_Driver_3TY1R_WN_10.0.31.1000_A02.EXE | Chipset (107MB) | Recommended
    Download File
    Add to download list
    O2 Micro OZ777xxx/OZ621XX memory card reader Driver View full driver details
    Chipset_Driver_VPNKY_WN_3.0.8.45_A06.EXE | Chipset (16MB) | Recommended
    This file will automatically self-install after downloading.Restart required "
    There is something wrong with this tablet.
    Download File
    Add to download list

  • Will Not Copy After Being Idle

    THIS IS A COPYING ISSUE!!!  After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print.  I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem.  Consequently, we purchased a new HP 5740 printer  The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work.  If you then turned the printer off and immediately turned it back on, it would copy.  Again, Comcast reiterated it was a printer problem.   I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer.  After hooking up the second HP 5740, the same problems with copying occurred.  I returned the second HP 5740 to the dealer for a refund and left town for three months.  We recently returned and purchased a HP ENVY 7645 printer from another dealer.  We are having the same issues with this printer as we had with the two previous HP 5740 printers.  I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician.  The installation occurred today and we are still experiencing exactly the same problem.  The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy.   He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem.  DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

    Hi @lamoso,
    Welcome to the HP Forums!
    I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
    I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
    After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
    Let's see what happens after giving these two steps a try!
    Thank you for posting!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.”
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • RE: Force user to re-login if the application is idle for awhile!

    Hi,
    I a similar thing a little while ago for an application written in a 4gl (not Forte) running
    windows 95 clients. I ended up dropping out to "C" and using the SDK to install
    hooks which monitored certain mouse and keyboard events to the application.
    It ended up being less than 10 lines of code in the end whereas when I tried
    to do it within the 4gl it was looked like wholesale changes to lots of code.
    This option fell down when the user was reading their help file or updating
    a word document so we added a pop-up which came up at the front of all applications
    on the PC giving the user a further minute to respond so as not to annoy the genuine
    user who was still "there" but doing something else.
    I have not had the chance to try this in Forte yet but it should be possible.
    If you think this might be an option for you I will try and cobble together an
    example.
    Dalton
    ===============================================================
    Dalton Cranston 45 Castle St.,
    GO5 Ltd Reading. RG1 7SN
    E-mail: [email protected] United Kingdom
    URL: www.go5.com Phone: +44 (0)1189 589 555
    Fax: +44 (0)1189 587 467
    -----Original Message-----
    From: Lu Wang X1 [SMTP:[email protected]]
    Sent: 13 February 1998 17:45
    To: [email protected]
    Subject: Force user to re-login if the application is idle for a while!
    Hi;
    For some security reasons, it requires our Forte application to force user to
    re-log into the application if the user doesn't use this application for 10
    minutes. The problem and difficulty to us is that how to determine there is no
    activity going on for this application on the client's PC.
    Any thought and ideas will be greatly appreciated!
    Lu Wang
    Eli Lilly and Company
    [email protected]
    (317)276-5776

    Hi Rick,
    Thanks for the Reply.
    When they are doing some action with RF id system gave DUMP - ITS_TEMPLATE_NOT_FOUND.
    With this is there any efect on Table locking.
    We got the dump on the ITS screen where as at the same time in back end ECC system TABLE data is using.
    Thanks
    Naresh

  • DVR Upgrade / Expansion - External Hard Drive goes idle

    I upgraded my DVR by buying a 2TB external eSata hard drive.  The external drive works when I power it on and it shows up in my DVR menu.  I have been able to record to the external device and playback.
    The problem is that the device goes idle and goes into standby mode.  The cable box then does not recognize it and only records to the internal storage.  The only way I can get it to record to it is to manually turn it off then back on.  I contacted the manufacturer and it doesn't have a shutdown feature, they said the issue is with the cable box not sending power to it.
    Is there a fix for this?

    I am not sure why it is doing that. The external drives so still keep working if the box is in standby. To rule out it being a problem with the box you can hook it up to another box you may have or hook it up to a friends box to test it. Also refer to our e-sata page talking about the connectivity, drives we have tested and approved services for(though people have successfully used other drives) , and  frequently asked questions.
    http://www22.verizon.com/residentialhelp/fiostv/other+hardware/esata/129841.htm?
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Idle Timeout & Session Timeout in Wireless LAN Controller

    Hello Team;
                   I am confused with these two values and their working.
    1. Idle Timeout :
        Case 1 : When the client move out of the wireless covergae area or shutdoiwn his laptop, controller will wait for the idle timeout to expire and then the AP sends the disassocciation frames to the client, and if the AP is not getting any acknowledgement , the client entry is deleted from the WLC
       Case 2 : In this case the clients manually disconnect from the SSID. Thatmeans the client is initiating the disassociation request to AP and the controller. In this case since the client is sending the disconnect notification does the controller should wait for the idle timeout to expire or once it receives the disassociation message from the client, it will immediately remove the entry from the controller regardless of the idle timeout value.
    Please confirm
    2. Session Timeout :
             Could you please let me know the difference between these two values. One differenec i know is that idle timeout is globally and the session timeout is specific to the SSID. Other than this is there any functionality difference between these two?
    Thanks & Regards
    Sreejith R

    Session timeout is a value that forces a re-auth when the timer expires. This value starts copying down when the client is authenticated. Idle timer is also a hard timer and it removes the client from the WLC after this timer expires. So if a user powers down his or he laptop or a device goes to sleep and doesn't respond to the AP, this timer starts counting down. When the value expires, then the next time that client associates, he or she will have to perform a full authentication. This is however if you not using open encryption and nothing else.
    You will be able to see the values decrement inf when you look at the client status on the WLC. In the monitor tab and clients.
    Sent from Cisco Technical Support iPhone App

  • My MacBook Pro restarts after it's been idle for an hour

    I'm new to daily Mac use, but I think I have my settings correct. My laptop is kept plugged in at work - never runs on battery. In my Energy Saver system prefs, I have Computer Sleep and Display Sleep set to Never on both Power Adapter and Battery, all options (hard disk sleep, wake for network access, reduce brightness, start up after power failure) are unchecked. There is nothing set up in the Schedule area to turn on or off at specific times.
    Every time the computer is idle for more than an hour (when I'm at lunch or in a meeting), when I come back the computer has restarted itself. Not gone to sleep, or shut down, but completely restarted.
    Is there some other setting I'm missing that's making this happen? Although I try to remember to save all my work before I leave just in case, every so often I forget, and I'm getting sick of losing work (or even just losing system state and having to restart all my programs, reopen all my files, etc.)
    Someone on the apple.stackexchange forum suggested checking my console log, but when I posted the results I didn't get any comments except that maybe it had overheated. But it never restarts randomly, which I would think would happen if it had overheated. It's always tied to the idle time.
    Here's the console log for the most recent event; can anyone tell me what's going on?
    6/14/11 1:55:10 PM          TransmitFSHelper[4243]          bytes transferred 3881
    6/14/11 1:55:53 PM          [0x0-0xfa0fa].com.activestate.Komodo[4306]          fillNetscapeFunctionTable
    6/14/11 1:58:28 PM          [0x0-0xd10d1].com.google.Chrome[4095]          2011-06-14 13:58:28.556 Google Chrome Helper[4340:107] __CFServiceControllerBeginPBSLoadForLocalizations received error 1100 from bootstrap_look_up2
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          ([0x0-0xcf0cf].com.apple.Stickies[4092]) Exited: Killed
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          ([0x0-0xf80f8].com.panic.TransmitMenu[4237]) Exited: Killed
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          (com.apple.AirPortBaseStationAgent[4070]) Exited: Killed
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          ([0x0-0xfe0fe].com.apple.ScreenSaver.Engine[4496]) Exited: Terminated
    6/14/11 3:00:19 PM          loginwindow[3881]          PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          Tue Jun 14 15:00:19 Web-Devs-MacBook-Pro.local loginwindow[3881] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    6/14/11 3:00:19 PM          loginwindow[3881]          _NXSetCursorRect: error getting window bounds (1002)
    6/14/11 3:00:19 PM          loginwindow[3881]          _NXSetCursorRect: error getting window bounds (1002)
    6/14/11 3:00:19 PM          loginwindow[3881]          _NXSetCursorRect: error getting window bounds (1002)
    6/14/11 3:00:19 PM          loginwindow[3881]          PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
    6/14/11 3:00:19 PM          loginwindow[3881]          PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          2011-06-14 15:00:19.628 loginwindow[3881:107] PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          2011-06-14 15:00:19.629 loginwindow[3881:107] _NXSetCursorRect: error getting window bounds (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          2011-06-14 15:00:19.629 loginwindow[3881:107] _NXSetCursorRect: error getting window bounds (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          2011-06-14 15:00:19.629 loginwindow[3881:107] _NXSetCursorRect: error getting window bounds (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          2011-06-14 15:00:19.629 loginwindow[3881:107] PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
    6/14/11 3:00:19 PM          com.apple.loginwindow[3881]          2011-06-14 15:00:19.629 loginwindow[3881:107] PScurrentwindowbounds: CGSGetWindowBounds returned error (1002)
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          Background: Bug: launchd_core_logic.c:2489 (24498):0
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          Background: job_mig_intran() was confused by PID 0 UID 0 EUID 0 Mach Port 0x7703: kernel_task
    6/14/11 3:00:19 PM          com.apple.launchd.peruser.501[4053]          Bug: launchd_runtime.c:935 (24003):0: j != NULL
    6/14/11 3:00:20 PM          com.apple.WindowServer[4811]          Tue Jun 14 15:00:20 Web-Devs-MacBook-Pro.local WindowServer[4811] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    6/14/11 3:01:29 PM          com.apple.launchctl.Aqua[4842]          launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.versioncueCS3.monitor.plist
    6/14/11 3:01:29 PM          com.apple.launchd.peruser.501[4840]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    6/14/11 3:01:29 PM          com.apple.launchd.peruser.501[4840]          (com.apple.Kerberos.renew.plist[4856]) Exited with exit code: 1
    6/14/11 3:01:31 PM          [0x0-0x118118].com.google.Chrome[4878]          [0614/150131:INFO:breakpad_mac.mm(89)] Breakpad disabled
    6/14/11 3:01:31 PM          com.apple.launchd.peruser.501[4840]          (0x100402ce0.mach_init.VersionCueCS3monitor) Failed to check-in!
    6/14/11 3:01:34 PM          HyperDock Helper[4884]          Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types:  dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found.  Did find:
            /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
    6/14/11 3:01:34 PM          [0x0-0x11f11f].de.bahoom.HyperDock-Helper[4884]          HyperDock Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
    6/14/11 3:01:43 PM          [0x0-0x117117].com.adiumX.adiumX[4877]          SocketRead err = -9806
    6/14/11 3:01:43 PM          [0x0-0x117117].com.adiumX.adiumX[4877]          cdsa: SSLHandshake failed with error -9806 (connection closed via error)
    6/14/11 3:01:50 PM          GrowlHelperApp[4872]          MailMe: No suitable SMTP account found

    Doesn't sound like it.  It sounds like you're being logged-off.
    Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc? 
    If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
    You need to know which it is, as these will have very different causes, and different places to look for a solution.

  • Any Way to Test IDLE

    Sun Java(tm) System Messaging Server 7u2-7.04 64bit (built Jul 2 2009)
    I configured IDLE according to these instructions:
    http://wikis.sun.com/display/CommSuite/Configuring+IMAP+IDLE
    (except for setting an environment variable to restrict access),
    see it advertised when I telnet to the IMAP port, mail seems to arrive quickly in my configured Thunderbird client (which supports IDLE), but:
    Is there any way to know it is working as it should (e.g. connection logs), and is configured correctly?
    Thanks,
    s7
    P.S. I do see this in the imap logs - which looks like IDLE stuff working? Any way to turn this logging up?
    Is local.store.deadlockaggressive IDLE related?
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10609]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) shutting down
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10614]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10611]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10612]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10609]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10613]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) shutting down
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10610]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) shutting down
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10608]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) shutting down
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10613]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10608]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10614]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10611]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10612]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10609]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10607]: Account Notice: close [123.456.100.12:54558] tst140 2009/8/12 18:25:46 0:12:07 536 3985 1
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10610]: ENS Information: Closing session. Events in/out: 1/0. KB in/out: 1/1. Subscriptions max/total: 1/1.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10610]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10613]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10608]: ENS Information: Closing session. Events in/out: 0/0. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10607]: General Debug: GDispCx graceful shutdown timed out
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10607]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) shutting down
    [12/Aug/2009:18:37:53 -0400] t0 imapd[10607]: ENS Information: Closing session. Events in/out: 2/0. KB in/out: 1/1. Subscriptions max/total: 2/4.
    [12/Aug/2009:18:37:54 -0400] t0 imapd[10607]: ENS Information: Closing session. Events in/out: 0/3. KB in/out: 1/1. Subscriptions max/total: 0/0.
    [12/Aug/2009:18:38:34 -0400] t0 imapd[29936]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:34 -0400] t0 imapd[29936]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:34 -0400] t0 imapd[29937]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29938]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29936]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29936]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29937]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29937]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29937]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29938]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29938]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29938]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29940]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29935]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29939]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29942]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29940]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29940]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29941]: Store Debug: local.store.deadlockaggressive is set to 10
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29935]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29935]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29939]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:35 -0400] t0 imapd[29935]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29940]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29942]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29942]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29939]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29939]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29941]: General Notice: iBiff plugin loaded
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29941]: General Warning: Sun Java(tm) System Messaging Server IMAP4 7u2-7.04 64bit (built Jul  2 2009) starting up
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29942]: General Debug: Connected to ENS server
    [12/Aug/2009:18:38:36 -0400] t0 imapd[29941]: General Debug: Connected to ENS server

    starman7 wrote:
    is there any way to know it is working as it should and configured correctly?The functional test is straight-forward enough e.g.
    [root@mailserver sbin]# telnet mailserver 143
    Trying 129.158.87.170...
    Connected to mailserver.aus.sun.com (129.158.87.170).
    Escape character is '^]'.
    * OK [CAPABILITY IMAP4 IMAP4rev1 ACL QUOTA LITERAL+ NAMESPACE UIDPLUS CHILDREN BINARY UNSELECT SORT CATENATE URLAUTH LANGUAGE ESEARCH ESORT THREAD=ORDEREDSUBJECT THREAD=REFERENCES ENABLE CONTEXT=SEARCH CONTEXT=SORT WITHIN SASL-IR SEARCHRES XSENDER X-NETSCAPE XSERVERINFO X-SUN-SORT ANNOTATE-EXPERIMENT-1 X-UNAUTHENTICATE X-SUN-IMAP X-ANNOTATEMORE XUM1 STARTTLS IDLE AUTH=PLAIN] mailserver.aus.sun.com IMAP4 service (Sun Java(tm) System Messaging Server 7.3-0.01 32bit (built Jul 29 2009))
    A01 login shjorth password
    A01 OK User logged in
    A02 select INBOX
    * FLAGS (\Answered \Flagged \Draft \Deleted \Seen NonJunk)
    * OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen NonJunk \*)]
    * 9 EXISTS
    * 0 RECENT
    * OK [UNSEEN 7]
    * OK [UIDVALIDITY 1249853070]
    * OK [UIDNEXT 11]
    A02 OK [READ-WRITE] Completed
    A03 idle
    + idling
    <sent email to account>
    * 10 EXISTS
    * 1 RECENTRegards,
    Shane.

  • How to Increase the 15 Minute Idle Timeout?

    I saw some similar posts to increasing the EM timeout, but they didn't seem to relate to the idle timeout period.
    I need to increase the idle timeout from 15 minutes to something more like 30 minutes. A lot of times, I'll be editing a package with 10g on the web and doing some research online in between edits, only to come back and be timed out for no activity within 15 minutes. That's just too short. Can I increase the time? Where can I find that setting?
    Thanks!

    Change or Add the parameter in emoms.properties
    For DBconsole
    $ORACLE_HOME/servername.domain_SID/sysman/config/emoms.properties
    For Grid Control
    $ORACLE_HOME/sysman/config/emoms.properties
    For example, you can change this time to 60 minutes (1 hours) by adding the following lines to the above file.
    oracle.sysman.eml.maxInactiveTime=60

  • Using WMV in Premiere Pro and dealing with huge idle processes

    Ok, I'm not sure if these two issues are related but here goes.
    I am a training developer, and a lot of what I do is editing screen captures. I have Production Premium that I use to edit my screen captures. The screen captures I get using the free Microsoft Expression Encoder, which encodes into high-quality WMV.
    These videos import fine into Premeire, but my machine slows to a crawl when I try to use them. I am a recent import from FCP, and I know that there, I delt with the same issue until I started converting to ProRes.
    Now, I know Adobe doesn't have a standard format, but is there another format that I could/should use that would help me.
    Perhaps unrelated, but I'm also noticing that, even when I close Premiere, I still have often huge processes running in the background. The premeire pro process sometimes is running at a hundred MB (100,000k) when the program is supposed to be closed (it also runs at a GB of memory when open but idle).
    I have a new and fairly fast machine, and am not sure why I'm having these slowdown issues.
    I'm running:
    Production Premium CS5.5 on Windows 7 (64 bit)
    8GB RAM
    Intel i7-2600 @ 3.4 GHz
    AMD RADEON HD 6350
    Anyway, if anyone has any suggestions to any of this, from setup changes to better formats to transcode into, I'm all ears.
    Thanks!!

    I'm not sure what is eating up your system resources, but .wmv files
    are considered to be a delivery format, and are not ideal for editing.
    I have never tried to edit screen capture video from any source, but you might consider
    upgrading to Expression Encoder 4 Pro (with codecs)... at least it includes H.264.
    Expression Encoder 4 Pro

  • CPU usage when 5 tabs are open and all idling is 35% of 38% total and fan active alot

    It seems to me in the last week or so, Firefox has been consuming alot of CPU cycles. This is when my laptop is idling. I know because I monitor by looking at the taskmgr. I see that it takes up 80-90% of the CPU which show as high as 35-40%.

    Hi a few days ago I had thought to post it, I have the same computer as the teammatebut a GTX460 @ 4.7 and MPE using colorful II if I use my video in the timeline onlystutters, and a cpu usage of 30 %.
    This is normal?
    I have two discs, one for OS and one for the project, and the preview footage files.
    discs can be problems?

Maybe you are looking for