IDM 8.x where are the access logs?

Running IDM on linux and want to know where to find the access logs that state who has logged into IDM.

Hi Xoth-
Are you able to log into the IDM admin interface as configurator and reach the "Reports" tab? You should then be able to run a "Today's Activity" report or a "Weekly Activity" report, which will show you who's logged into IDM during a specified period of time. You can customize the report(s) as necessary.
You're not going to be able to find a simple access log that shows logins into IDM, such as what you would have with an LDAP server, for example. I believe you'll need to run a report as I described above.
Regards,
Alex

Similar Messages

Where are the Planning logs?

We are on Planning 11.1.1.3.
where are the Planning logs?
Some are here:
hyperion\logs\services\HyS9Planning-sysout.log
hyperion\logs\services\HyS9Planning-syserr.log
Are the rest in Tomcat directory?

Hi,
Have a look at below post:
Re: Log file locations - Planning/Workspace
Cheers,
Alp

Where are the apache logs?

I need to view the apache logs. How and where do I access them in XE?
Whoever designed Apache to be hidden inside the database and accessable only through db packages needs to be spanked. If there is a good argument for hiding it all away in the db I'd love to hear it! Why make life harder? It's so easy in Standard and Enterpise DB to configure apache and modplsql.
Paul

OK David here goes,
I'm using ApEx 2.1 on Oracle Express DB.
I export an application, that works fine. I now want to import it again into the same instance as a copy with a new Application Id. I start the import wizard, click on load and then I get
"Page can not be found" error.
I've followed the threads
import application - wwv_flow_accept page not found and ora-904
Page not found after import of application
but I have no idea of how to access the Web server Logs in Oracle Express which is mentioned in the above threads.
I've just had a look at the import repository and each time I tried to import the file it loaded with 2,065,528 bytes.(i.e. 3 times)
The actual file size is 4,334 Kb so it seems the import falls over half way each time.
Any ideas on where to start trouble shooting?
thanks for your response
Paul P

Where are the archived log?

I've set my server to archive mail logs every 7 days, but I cannot find where they are archived. I do not see anything other than the normal complement of log files in /var/log. Yes it has been more than a week. But where do they go and what are they called?

It appears that you're assuming rather more around the word "archive" than exists here.
The archives that you seek are (also) stored in the /var/log directory.
The log files use the extension .log, and the log archive files use extensions such as .bz2 or .gz, and the associated data compression schemes.
The following shell command:
$ sudo find / -name ipfw -print
will show you all files with the substring ipfw in the filename. Which will show you a few files here and there on your disk that are related to the firewall, including the man pages, and the /var/log directory.
But no secret archives.
Run some tests with the archive settings over a week or two, and watch what happens in the /var/log directory.

Where are the Adapter Log Files?

Hello All,
I have an message that just isn't being loaded by the receiving business system and I'd like to examine the receivers log files for additional details to help me debug the problem. I don't know where to look yet. Perhaps the group can offer it's collective advice.
Here's the details of the problem I'm tackling.....
I have a 3rd party system that's trying to send a purchase requisition to an SAP Business System via XI. The message is received by XI correctly. XI correctly performs the transformation and identifies the message interface and selects correct receiver for the message. XI communicates with the receiving business system via the appropriate communication channel.
The message "fails" in the receiving system with the following error:
HTTP server code 500 reason Internal Server Exception explanation Error parsing of SOAP header.
That's not particularly enlighting? What exactly about the SOAP header didn't the receiving system like? Perhaps if I could examine a log file on the receiving system, I could figure out what was preventing the message from being loaded.
A review of TCode SM21 and ST22 on the receiving system - show no errors
The message is being sent to an HTTP receiver channel on an SAP Business System. The URL being posted to looks something like this: http://host:port/sap/xi/engine?type=receiver
That's the URL for the local integration engine's pipeline on the receiving SAP business system, right? SXMB_MONI on the receiving system doesn't show an errors because the SOAP header could not be interpreted. What other log files would I examine on the receiver system to see an error in message parsing?
Thanks for your help! Points will be gladly awarded

Hi,
You can look into the Message Display Tool.
<b>http://server:javaport/MessagingSystem/monitor/montior.jsp</b>
This link will lead you to see the entire SOAP message that is actually sent out of XI and received by XI . You can also see the Adapter Log on this link.
Regards,
Bhavesh

Where are the accessibility options for the "Down-Level" items

I have an animation I've created (that I haven't cleared with my client yet, so I, unfortunately, cannot share a link). However, the client is government and there is a strict requirement for 508 compliance or "Accessibility." I have been able to get alt tags throughout the main animation with no problems and tabindexing too. The agency is still using IE8 with Chrome as their solution to newer HTML5 content. Because of this we have experienced that most will look at the product in IE8 first. This brings me to requiring a "Down-Level" page. On this page I have placed an image with a description to upgrade, but the image MUST have an alt tag. How can I accomplish this? There is no Accessibility area in Down-level and in making varying entries to the "index_preloader.js" file I have been unsuccessful (I've tried title: '...', and alt: '...' and ['...'] and many other combinations. Please help!
I wish I could share the link. I am willing to run a web based remote session using Join.me or similar, if you'd like to take a look.
Any help or suggestion(s) is/are VERY MUCH appreciated! Thank you.

Hi Sheila,
Yes, the Distiller joboptions. We are using Distiller 9, 8, and 7 that comes with the Adobe Acrobat software. We are all on Windows XP and 7. I'm not very familiar with the joboptions, so I'm not an expert on how all of this works.
One writer said she is using the PDFX4 2007 job option, which appears to be the default with Framemaker 9. I think these files are hidden and only the customized options can be saved.
Susan

WHere are the console logs in NW04 EP6?

I just installed WAS 640 Sp9 and EP6 with the latest patch and I cannot find the disp + server console logs?
Thanks
Jeremy

Hi all,
Sorry for the late response.
The WebAS Java 6.40 logs can be found in /usr/sap/<SID>/<INSTANCE>/j2ee/cluster/server<N>/log.
The /usr/sap/<SID>/<INSTANCE>/work directory contains the logs of the Startup Framework.
Best regards,
Vladimir

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
Free up space on iPad
Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

Where are the logs in iAS ( 9.0.4.x.x )

Hi
I have an installation of iAS ( 9.0.4.x.x ) on windows. Now, I am getting a trouble with the disk space because where the iAS is located is being filling for log files and I do not find where are the logs that has more capacity. The disk is getting full.
Thanks for the information
Joel Pèrez

Hi,
You should be able to find this information in chapter 4 (Managing Log Files) in the 9.0.4 admin guide at http://download-west.oracle.com/docs/cd/B10464_05/core.904/b10376/log.htm#i1011108.
Table 4-1 lists the log file locations for each component.
Regards,
Mathias

Where are adobe reader log files?

Where are the log files for Adobe Reader?
When one of our clients opens a form off our liquid office server we receive an error. If possible I would like to find a log file that might give some sort of clue as to why this is happening. Thanks

I'll make an inquiry about that and if we have to contact liquid office at some point my guess is they may request that we do that if there is likely to be any useful information there. It is likely going to be pretty difficult as we have lots of clients opening forms constantly throughout the day.
I did find adobearm log file and also adobereaerbroker log file in the temp files on my own. So it does seem like reader logs some of it's activities. I haven't examined them completely yet but a quick comparison between a working machine opening our problem form and the one the computer that doesn't open it properly seems to show no obvious differences. They both seem to show problems with access denied and registry entries. However one works and the other doesn't even with the same issues in the log.

Where are the promised "over 700" fonts?

The Adobe email announcing file and font sync said,
We're happy to announce that you can now sync the files and folders you store in Creative Cloud directly to your desktop with the Creative Cloud desktop app. Also, your membership now includes access to over 700 fonts from Typekit, which can be quickly and easily synced to your computer. [emphasis added]
So I eagerly logged into my TypeKit account, via Creative Cloud, and when I filter down to only the fonts for desktop use, there are only 205!
So where are the other 500 fonts Adobe just advertised?

Here's the full message from Adobe:
We're happy to announce that you can now sync the files and folders you store in Creative Cloud directly to your desktop with the Creative Cloud desktop app. Also, your membership now includes access to over 700 fonts from Typekit, which can be quickly and easily synced to your computer.
Ready to begin? If you don’t already have the Creative Cloud desktop app, grab it from the Download Center—it’s free with your membership. If you already have it installed, just relaunch the app. Then go to the Files or Fonts panel to start syncing.
As you can see, it very clearly says "over 700 fonts from Typekit, which can be quickly and easily synced to your computer." And this couldn't be referring to just the TypeKit library because there were over 900 fonts in Typekit when this email went out.

How to track browser type in the access log

I have looked through the documentation on logging features on how to log the browser
type for visitors. Is there a straightforward way to do add this information
to the access.log?
We are using Weblogic Portal 7.0 sp4
Thank you.

Hi,
What do you mean by current and old version? Any changes in history log under general settings-->service tab?
Thanks & Regards,
Nagarajan

Where are the .joboptions stored on a Mac for InDesign CC?

Where are the .joboptions stored on a Mac for InDesign CC?
I put them in the usual directory:      /Library/Application Support/Adobe/Adobe PDF/Settings   . . . but they are not seen by InDesign CC.
. . . Photoshop, Illustrator, Distiller and Acrobat are seeing my custom profiles and any default profiles I removed are not there for those apps.
Even older versions of all these apps and InDesign 6 and 5 see my custom profiles.
But InDesign CC only shows the ones shown in the screen shot below: (High Quality, the PDF/X versions[3], Press and Smallest size)
I know I can probably do a "Load" profile, but that's not the point and I need to remove the default profiles.
I'm in a multiple user environment and need to lock down the use of profiles to our companies select few.
Did a thorough search of the entire Mac and PDF/X- does not even show up.   Any suggestions?     Anyone?    I'm scratchin' my head at this point.

This was the correct answer:
   Laubender   Jun 2, 2014 12:18 AM (in response to Maurice Castelbuono)
@Maurizio – the standard settings, the joboption files with the brackets like [PDF/X-1a:2001] are stored inside the inDesign app for InDesign CC 9.2.1.
The path for these would be:
/Applications/Adobe InDesign CC.app/Contents/MacOS/Resources/Adobe PDF/settings/mul
or with a Japanese version of InDesign:
/Applications/Adobe InDesign CC.app/Contents/MacOS/Resources/Adobe PDF/settings/japan
If you do a right-click on the InDesign app you can show them with "Show Package Contents" options.
All other PDF joboptions that you are creating are relative to your current User Library. They are stored in:
~/Library/Application Support/Adobe/Adobe PDF/Settings
Where the tilde sign at the beginning indicates the home of the currently used user.
You can access ~/Library, if you press the alt key when accessing the "Go To" menu in the Finder. Otherwise it's invisible.
Uwe

In Authoring Enviroment where are the results of a leaner stored?

In Authoring Enviroment when i go to change attribute value in test author and click "Result Storage"checkbox, i cannot fiind the place where are the test results been stored.
Can anyone help me in this regard? please
Abdul Qadir (SHMA)

Hello,
I am trying to figure out how to access the saved course and I am having trouble understanding the settings in the AE and locating the data in the provided tables as discussed.
1: What is the correct setting in the "Results Storage" and what does each selection mean?
2: Are there separate tables to be used if I am using AICC instead of SCROM? We are currently using AICC to allow multiple parts in the AE? (i.e. a PDF is the main data source and the user has to click the CONTUINE button to access the assessment)
3: What table allows me to view the final assessment scores or the inputted answers for the course?
Thank you for any help with these issues and any guidance will be greatly appreciated.
Kind regards,
Brandon Gabany

Where are the printer profiles in Mt. Lion 10.8.5? I want to install paper manufacturer's profiles.

I want to install paper manufacturer's profiles. All of my existing profiles were carried over when I upgraded to 10.8 but i do not find anything like the previous Color Sync folder. Where do I put the new profiles? And why can't Spotlight find the existing ones? BTW, I can't find them on my iMac running 10.7.5 either.

Where are the rest?
Depends. For Epson printers, they're in the /Library/Printers/EPSON/ folder, and that itself varies. For the Stylus Pro 4900, they're in that folder, and then another couple of subfolders deep in InjetPrinter2/ICCProfiles. Sometimes they're tucked away in a .plugin or .framework file within the EPSON folder, or one of its subfolders. In short, they're not always easy to find. At least not with Spotlight.
To make your search way easier, download the free EasyFind. Turn on the check boxes to look within Package contents, and Invisible Files & Folders. There's nothing on the drive that can hide from you. Then do a search for .icc .
But unless your objective is to remove a long list of profiles you'll never use, there's no need to find these other obscure locations OS X lists profiles from. Just put the ones you want to use in either the /Library/ColorSync/Profiles/ folder (if you want all users of that Mac to have access to the profiles), or the ~/Library/ColorSync/Profiles/ folder (the tilde means your user account). Only you will have access to the profiles if placed there.

IDM 8.x where are the access logs?

Similar Messages

Maybe you are looking for