IDM Job Logs

Friends,
We are in the process of rolling out IDM password self service. We configured developement and production. For some reasons we had to delete the production identity store and recreated.
From the time we did that, I cannot see job logs for any tasks except for the initial load. So when I inititate the tasks for setting the Q&A it completes successfully but I cannot see it in the overall job log or individual job log.
Any thoughts..
Regards,
Muthu Kumaran KG

Somehow I am not surprised that Oracle is the backend... What version?
I would advise checking with your DBA that all of the mxmc users have the correct privileges and that the correct privilieges have been granted to the IDM database. Are you getting any error messages in the dispatcher?
Also from the IDM end I would double check all of the connection strings, make sure that IDM is using Java 1.5 and that your are using the 1.2 JDBC drivers. I've found this to generally be the most reliable connection.
Good Luck!

Similar Messages

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

How to display custom error message in Job log for batch processing

Hi All,
I am rexecuting one R/3 report in batch mode and i want to display all the custom error i have handled in job log when its executed from SM36,SM37. The custom error are like 'Delovery/Shipmet doe not exits' or others which we can display in online mode like message e100(ZFI) or any other way and accordingly we can handle the program control like come out of the program ro leave to transaction'Zxxx' or anything. But i want my program to be executed completely and accumulate all the error in job log of batch processing.
Can anyone tell me how can i do so...
Thanks,
Amrita

Hi,
Thats what i have done from the begining. I have written message like this:
Message i100(ZFI).
I was hoping to see this message in the log. But i cant see. Can you help me pleae...

Message with IDOC number, created by LSMW, missing in job log in SM37

Hi gurus,
We have a temporary interface which uses LSMW to create IDOCs and update in SAP. It's used for materials, BOMs and document info records. In LSMW we have defined standard message types MATMAS_BAPI, BOMMAT and DOCUMENT_LOAD for the IDOCs. All these have the same problem.
A background job runs and starts LSMW. In the job log in SM37 I want to see which IDOCs were created. For some reason this is different in my development system and my test system, and as far as I know all settings should be the same. In the test system LSMW creates more message lines in the job log, than it does in the dev system. Message number E0-097 is "IDOC XXXX added", and this is missing in the dev system.
This is what it looks like in the dev system:
Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
Import program executed successfully                                                             /SAPDMC/LSMW   509    I
File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW   502    I
Conversion program executed successfully                                                    /SAPDMC/LSMW   513    I
Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')       /SAPDMC/LSMW 516    I
And this is what it looks like in the test system. More information, which is exactly what I want in dev system too:
Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
Import program executed successfully                                                             /SAPDMC/LSMW 509    I
File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW 502    I
Conversion program executed successfully                                                    /SAPDMC/LSMW 513    I
File 'XXX.lsmw.conv' exists                                                                              /SAPDMC/LSMW   502   I
IDoc '0000000002489289' added                                                                      E0                         097   S
File 'XXX.lsmw.conv' transferred for IDoc generation                                      /SAPDMC/LSMW   812   I
Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')      /SAPDMC/LSMW   516   I
In both cases the IDOC is created and update works fine.
My only issue is that I can't see the IDOC number in the dev system. I know I can get the IDOC number in WE02, but in this case we have program logic which reads the job log to be able to check IDOC status before sending OK message back to the other side of the interface.
I hope any of you can have an idea how I can update somewhere to get message E0-097 with IDOC number into the log.
Regards,
Lisbeth

Hi Arun,
If you want to show your messages in the job log you have to use the MESSAGE statement. In case you use WRITE statements an output list be created which can be found in the spool (there is an icon to go to the spool directly).
Regards,
John.

Background Job Log - Interface error

Hi,
I am using a program in back ground which will transfer the data from one FTP server to another FTP server, the program is scheduled in back ground, the Job appears in green means sucessful but
in Job log I get the following log, (an if there are 10 file to be sent, 8 files moves but 2 files fails).
ftp> Interactive mode Off .#
ftp> prompt
ftp> open primary-proxy
Invalid command.#
Invalid command.#
ftp> sk74n2w9
Not connected.#
ftp> ascii
Not connected.#
Not connected.#
ftp> close
quit Transfer Complete
> ftp: connect :Connection refused
D:\usr\sap\PRD\D00\work>endlocal
Please give your valuable imputs.
Regards,
Prabhu

Hi all,
Please give some inputs on the above question. and any clarifications pls let me know.
Regards,
Prabhu
Edited by: prabhu jayaraman on Dec 9, 2008 7:06 AM

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How to take the cron job log in HP UX?

Hi,
How to take the cron job log in HP UX
I need to run a backup and other stuff everyday. How do I check and start cron service under HP-UX UNIX operating system? How do I write cron jobs?
A. Cron service is required to run jobs and tasks such as backup.
You must login as the root to run following commands. Each user that is using the cron service must have a cron configuration file in the /var/spool/cron/crontab directory. Also users are permitted if their name appeared in /var/adm/cron/cron.allow file
Task: Find out if cron is running under HP-UX
Type the following command at a shell prompt
# ps -ef | grep cron
Open /etc/rc.config.d/cron file
vi /etc/rc.config.d/cron
Set control variable to 1 to enable cron: CRON=1
Set control variable to 0 to disable: CRON=0
Close and save the file. To start or stop cron you can type the following command:
# /sbin/init.d/cron start <-- start cron
# /sbin/init.d/cron stop <-- stop cron
Task: HP-UX Start cron service
If cron is not running, simply type:
# cron
Task: Edit / create cron jobs
Type the following command to submit a cron job:
# crontab -e
List your cron file:
# crontab -l
Backup all your cron jobs:
# crontab -l > ~/backup.cron.jobs
Remove ALL cron job:
# crontab -r
Task: Crontab file format
Cron file format is as follows:
MIN HOUR DATE MONTH DAY /PATH/TO/COMMAND
0-59 0-23 1-31 1-12 0-6 /root/scripts/backup2tape.shEasy to remember crontab file format:
* * * * * command to be executed
| | | | |
| | | | ----- Day of week (0 - 7) (Sunday=0 or 7)
| | | ------- Month (1 - 12)
| | --------- Day of month (1 - 31)
| ----------- Hour (0 - 23)
------------- Minute (0 - 59)To run /root/script/backup at 23:00, every day, enter:
# crontab -e
Append following
0 23 * * * /root/script/backupRun foo job very weekday (MON-Fri) at 6am, enter:
0 6 * * 1-5 /root/script/backupFor more information refer to cron and crontab man pages.
Subscribe to our free e-mail newsletter or RSS feed to get all updates. You can Email this page to a friend.
Related Other Helpful FAQs:
What is Cron?
Linux Start and stop the cron or crond service
Run crontab Every 10 Minutes
Linux / UNIX Setup and run php script as a cron job
Stop Ubuntu / Debian Linux From Deleting /tmp Files on Boot
Discussion on This FAQDavid Says:
January 15th, 2008 at 12:21 am
You might note that all files normally found in /etc/init.d, /etc/rc*.d, and others are all in /sbin in HP-UX 10.20 and up.
Note too that your formatting is off in the description of the /etc/rc.config.d/cron file. Also, if you run /usr/bin/cron instead of /sbin/init.d/cron start, the /etc/rc.config.d/cron file is not used.
Regards,
Satya

I guess it would :)
btw, how did this piece miss from the contents pasted by the OP ?
The doc has given all details of CRON and missed where to see the logfiles. :)
****Added****
I tried man crontab in windows, i dont see it.i overlook most of the things, i would have done the same ;)
Edited by: Bobcatalog on Oct 23, 2008 9:40 AM

Error in Source system (Job is not going in to job log of CRM system)

Hi,
We replicated datasources from CRM server in BI 7 server and they get replicated and are in Active version
All transactiond atasources which are 7.0 version are executing successfully, but the Datasources which are in 3.5 version i.e. Datasource for master data infoobject gives error while executing infopackage.
The error message is as follows:
"Diagnosis
     In the source system, there is no transfer structure available for
     InfoSource 0CRM_MKTMETA_ATTR .
System Response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench, regenerate from this source system the
     transfer structure for InfoSource 0CRM_MKTMETA_ATTR ."
Also while executing the infopackage the job log in source system is not able to create the corresponding job.
Following action are already been taken:
1. Datasource replication
2. Confirmed that the Transfer Structure are avialable and are in ACTIVE state.

Hi
It seems some changes are taken place at Source System for the Mast.Data DS. Try to Recheck the Same at Source System -- Activate/Retranport the same.
BI side.
RSA13Source System Your DS-- Replicate the Data Source -- Try to Run RS_TRANSTRUC_ACTIVATE_ALL(SE38) / Activate Transfer Rules Manually -- Then Full/Re Init -- Delta Uploads
Hope it helps and clear

Error reading job logs of Apps server from Central Instance

Dear Gurus,
We have newly installed system with one CI ( cluster environment) and 2 application Instances.
Systems are recently installed by other team. I am looking into support part after handover.
We have noticed below error while reading failed background job logs from our CI. If suppose any job is failing, we can read respective job log from that application instance but it throws error while reading job log from CI to either of application instance.
I checked /sapmnt/SID/global is shared among all 3 servers and i am successfully able to "Touch a" from applications instances.
Even though i have given "777" permissions to all folders like /sapmnt/SID , /sapmnt/SID/global , /sapmnt/SID/global/400JOB*
I am not able to read job log from CI , for same failed job I can read job log from respective application instance.
Error log :
Error reading job log JOBLGX00080700X39290
Message no. BT167
Diagnosis
The background processing system was unable to read the job log named in the message.
This message suggests that there is a problem with the TEMSE storage system of the SAP system. The TEMSE storage system is a repository for temporary objects, such as job logs and spool requests. Job logs are always stored in the TEMSE as operating system files.
This error occurs if the TEMSE system is not able to find or access the file that contains the text of the job log that you requested. Possible causes for the loss or unavailability of the job log include the following:
Someone deleted the required TEMSE file (from the operating system, not from within the SAP system).
A CRON (or equivalent scheduler) job has deleted the TEMSE file.
The file system in which the TEMSE stores its files is not mounted or is not accessible (NFS problem, disk failure, or similar problem).
The TEMSE reorganize or consistency check functions were used within the SAP system and deleted the job log.
SM21 logs :
Error 2 for write/read access to a file. File = /usr/sap/SID/SYS/global
BP_JOBLOG_SHOW: Failed to display jobs. Reason:
> Error reading job log JOBLGX00080700X39290
Strange this is I can check failed job log on one application instance frfom other application instance but not from CI.
Kindly throw some lights where to check.
Regards,

Hi Shravan,
I guess it is related to permission to /sapmnt/SID/global folder. Please ensure owner is sidadm:sapsys in all the systems viz CI, App servers etc.
Check the mounting options are correctly set with read/write mode.
Hope this helps.
Regards,
Deepak Kori

External Operation Job Log

Hello all,
I can't seem to find additional information on this. I have written an exteranl operation in c# and I can run it from the portal without any issue. I know that standard error is supposed to be captured in the job log, however I can't seem to figure out how to write to standard error from a c# console application. Console.error doesn't seem to cut it.
I am using ALUI 6.0 sp1, but I dont' think this has changed much over the years. Has anybody written a c# external operation and been able to write to the job log?
Thanks,
Berney

You could just make it write to stdout and then redirect stdout to stderr like this: "dir 1>&2". I put that in a bat file in the scripts directory and then made the bat an external operation. It wrote to the job logs like this:
Mar 3, 2009 11:40:55 AM- Starting to run operations (1 total) for job 'stdout dir test ext op Job'. Will stop on errors.
Mar 3, 2009 11:40:55 AM- *** Job Operation #1 of 1: ExternalOperation [Run as owner 'Administrator']
Mar 3, 2009 11:40:55 AM- Java Version: 1.5.0_12 from BEA Systems, Inc.
Mar 3, 2009 11:40:55 AM- OS x86 Windows 2003 5.2 as SYSTEM
Mar 3, 2009 11:40:55 AM- External Operation Agent for stdout dir test External Operation is starting...
Mar 3, 2009 11:40:55 AM- Original Script is: "test.bat"
Mar 3, 2009 11:40:55 AM- Scripts home is: E:\bea\alui\ptportal\10.3.0\scripts
Mar 3, 2009 11:40:55 AM- Appending E:\bea\alui\ptportal\10.3.0\scripts to test.bat.
Mar 3, 2009 11:40:55 AM- Full Path to script is: E:\bea\alui\ptportal\10.3.0\scripts\test.bat.
Mar 3, 2009 11:40:55 AM- Operation has timeout of 0 ms.
Mar 3, 2009 11:40:55 AM- stdout>
Mar 3, 2009 11:40:55 AM- stdout>E:\bea\alui\ptportal\10.3.0\scripts>dir 1>&2
Mar 3, 2009 11:40:55 AM- stderr> Volume in drive E is New Volume
Mar 3, 2009 11:40:55 AM- stderr> Volume Serial Number is 4CFC-EB07
Mar 3, 2009 11:40:55 AM- stderr>
Mar 3, 2009 11:40:55 AM- stderr> Directory of E:\bea\alui\ptportal\10.3.0\scripts
Mar 3, 2009 11:40:55 AM- stderr>
Mar 3, 2009 11:40:55 AM- stderr>03/03/2009 11:37 AM <DIR> .
Mar 3, 2009 11:40:55 AM- stderr>03/03/2009 11:37 AM <DIR> ..
Mar 3, 2009 11:40:55 AM- stderr>12/18/2008 07:59 AM 5,049 AnalyticsRunJobs.bat
Mar 3, 2009 11:40:55 AM- stderr>10/08/2008 01:35 PM 2,034 BulkSubscriber.bat
Mar 3, 2009 11:40:55 AM- stderr>10/08/2008 01:35 PM 3,577 SavedSearchMailer.bat
Mar 3, 2009 11:40:55 AM- Total Memory = 33554432 bytes, Free Memory = 9573312 bytes, Used Memory = 23981120 bytes.
Mar 3, 2009 11:40:55 AM- stderr>03/03/2009 11:37 AM 8 test.bat
Mar 3, 2009 11:40:55 AM- stderr> 4 File(s) 10,668 bytes
Mar 3, 2009 11:40:55 AM- stderr> 2 Dir(s) 17,469,964,288 bytes free
Mar 3, 2009 11:40:55 AM- *** Job Operation #1 completed: Process completed successfully; Command line: ""test.bat"".(282609)
Mar 3, 2009 11:40:55 AM- Done with job operations.
I don't think much has changed with this in the portal 6.x world, but it looks like stderr is definitely captured in wci 10.3. If there's a problem with an older version, start a support ticket to investigate a possible bug.

Writing in SM37 Job Log

Hi Abappers,
I have a requirement in which I am displaying all the error messages in an ALV when my program runs in Foreground. But this program runs in background, those error messages must be displayed in the Job Log of SM37.
I should not raise any error or information messages to come in log automatically as it affects the foreground processing of my program.
Is there any FM to write in the Job log?? Or can I use the Message statement in such a way that it is not diaplayed in forground?
Thanks in Advance,

Hi,
Try this.
If you are using ALV grid in the foreground, use the same without without creating the container (basically check the SY-BATCH, before creating a container). Then the same ALV grid will create a spool with all the messages during background execution.
Regards,
Sharin Varghese

Write Message in Job Log from FM

Hi everyone,
I´m having an issue trying to find the way to write a message in job log.
I´ve read a lot of solutions but I can't find anyone that describes how to do it from a function module.
What i'm saying is that all the answers focus on reports and I have to develop this from a function module.
If anyone can help me with that, I´ll appreciate it.
Thanks everyone.
Best regards.
Pablo.

Hi Thomas,
Thanks por replying. MESSAGE statement does not work.
Regarding the last question, it can´t be done like that .
Regards.
Pablo.

Regarding Messages to Job Log

Hi,
What is a Job Log.
i have to write messages to job log.
how to do this.
how can i see that messages whether it is written or not.
how it can be seen to the client/user.
regards,
kiran

Hi Kiran
Use 'write' to display the message in the job log.
write : / log_message.
Place this statement after the block of statements in your program where you want the message to be displayed in the log.
You can see the job log in SM37 transaction.
hope this helps you.
regards
Message was edited by:
Sarah Bollavaram
Message was edited by:
Sarah Bollavaram

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

Write to AWS job log

How can I write to the automation server job log file from my EDK AWS? This AWS does more then just return Groups and Users and I need to write to the log file the results of the additional operations.
Please let me know how to implements this.

Currently, the protocol between the portal and the remote web services only permits writing custom log messages from a crawler, but not from an authentication service or a profile service.
We are considering this feature for future releases; in the meantime, you may want to follow the pattern we use for our own products, which use Log4N or Log4J to write a remote log file. In the case of a critical error that the administrator needs to know about, throw an exception with a message; in 5.0.1 this message did not get put in the job log, but in 5.0.2 it does.

IDM Job Logs

Similar Messages

Maybe you are looking for