IDM (OID/OVD/OIF) on Solaris x86 ?

Hi,
I am completely stuck trying to install IDM 11.1.1.4 which is the only supported version for Solaris x86.
I have p11060980_111140_Solaris86-64 which is the 11.1.1.4 patch set but this will only install as an update to an existing installation.
However, I can't install 11.1.1.2 - or any other previous version - as a starting point as Solaris x86 is not supported!
I seem to be in a catch 22 here!
Any help would be hugely appreciated.
Many thanks,
Bernie

Have you sorted this out yet Bernie ?
There is an installer for 11.1.1.2 on x86-64.
Jon

Similar Messages

OID, OVD, OIF, OIM, OAM version

Hey guys, I wanted to know if there is some commands that would give me the versions of OID, OVD, OIF, OIM, OAM
Weblogic version can be found by connecting to the console at the bottom of the page: e.g:
"WebLogic Server Version: 10.3.3.0
Copyright © 1996,2010, Oracle and/or its affiliates. All rights reserved."
However, for specific product, I'm not sure if there is a way to know the version. Is there a version.property file or a command that can help me ?)
In case of OID, OVD:
- opmnctl services version
- odsm version
In case of OIF:
- opmnctl services version
- oif version
In case of OAM:
- version of identity server
- version of access server
- version of webgate
In case of OIM:
- version of OIM
Thank you for your help.

for OID-Step1-Make Sure DB is up and running
Run: prompt> tnsping <connect string>
Step2-Make sure OID processes are up
Prompt>$ORACLE_HOME/bin/oidctl connect=<servicename from tnsnames.ora> status
-Once u run above comnd u could see processes and ver
for OIA-Once u complete installations Open rbacx.log for versin info
thnks
vishwa
orcl

Base IDM product should consist of OIM, OID, OVD, OAM and OIF ?

Hi Experts,
I want to understand what should be the very base IDM 11g Product should satisfy majority of client requirement. What is best Practices of Product combination one should have ?
1) OIM, OID, OVD, OAM and OIF 11g
2) OIM, OID, OVD, OAM 11g
3)OIM, OID, OVD and OIA 11g
Considering 11g & best pratices.
I would like to understand what Pack is must for what kind of requirement ?
There are so many product combination so confused what is best base Security Prodcut combination can be ?
Help Appreciated.
Thanks In Advance.
Edited by: 937775 on 31/05/2012 06:01

Thanks Gyanprakash for valuable Suggestion.
I have one more question,
Now to do the OIM,OID,OVD,OAM Security Stack Installaton,
can I use two VM 1) all security product (OIM,OID,OVD,OAM) 2) DB VM (I heard we do have database VM)
Could you mind sharing Info 1) what number of VM do I use for security Product Installation 2) Can I use DB VM or Database should be installed physically not on VM ?
Thoughts ?

Identity Management: OID & OVD Monitor

Hi All,
We currently had OEM and I am trying get more details of what else I need in order to monitor OID, OVD and SSO. Do I need REUI or OEM is enough? Can someone please give me more details or point me to some documentations so I can check them out?
Thanks,

You probably need the Management Pack for OEM http://www.oracle.com/technology/products/oem/pdf/ds_iam_pack.pdf . I think the answer would depend on the type of monitoring and versions of software. 10g and 11g are very different, both OEM and IDM.

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

Install oracle 8.1.7 on Solaris(x86) 10 b72

Has anyone Installed oracle 8.1.7 on Solaris(x86) 10 b72???
When I run runInstaller I have
135$ Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
ld.so.1: /ora_inst/stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/i386/native_threads/jre: fatal: relocation error: file /ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so: symbol XShmQueryExtension: referenced symbol not found (/ora_inst/install/../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/../lib/i386/native_threads/libawt.so)
java.lang.UnsatisfiedLinkError:

try this:
LD_PRELOAD="libX11.so libXext.so" ; export LD_PRELOAD
./runInstaller

Oracle 8.1.5 Client/WLS/Solaris x86

has anyone been able to get Oracle's client 8.1.5 running on Solaris x86 in conjunction with WLS to talk to back-end Oracle? Any help would be greatly appreciated.thanks.

This will not work. We have not built the native libraries to work with
Solaris on Intel..
I suggest trying the platform independent type 4 JDBC driver available for
free from Oracle. It is supported (as is any JDBC driver) with WebLogic
Server. To download it:
Go to http://www.oracle.com and select the "Download" option.
From the resulting page, use the "Select Utility or Driver" dropdown to
select Oracle JDBC drivers
From the resulting page, scroll down a little (since SQLJ stuff appears at
the top).
Or, to go directly there:
http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Dean Davis" <[email protected]> wrote in message
news:3a267487$[email protected]..
has anyone been able to get Oracle's client 8.1.5 running on Solaris x86in conjunction with WLS to talk to back-end Oracle? Any help would be
greatly appreciated.thanks.

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
 at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
 at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
 at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
 at oracle.net.ca.InitialSetup.<init>(Unknown Source)
 at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000 /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000 /lib/libthread.so.1
0xfefd0000 /lib/libdl.so.1
0xfeed0000 /lib/libc.so.1
0xfea00000 /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000 /usr/lib/libCrun.so.1
0xfee50000 /lib/libsocket.so.1
0xfedc0000 /lib/libnsl.so.1
0xfeda0000 /lib/libm.so.1
0xfeeb0000 /usr/lib/libsched.so.1
0xfe9a0000 /lib/libm.so.2
0xfed50000 /lib/libscf.so.1
0xfe980000 /lib/libdoor.so.1
0xfe960000 /lib/libuutil.so.1
0xfe940000 /lib/libmd5.so.1
0xfe920000 /lib/libmp.so.2
0xfe8e0000 /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000 /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000 /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000 /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000 /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000 /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000 /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000 /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000 /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000 /usr/dt/lib/libXm.so.4
0xf0cf0000 /usr/openwin/lib/libXt.so.4
0xf0cc0000 /usr/openwin/lib/libXext.so.0
0xf1890000 /usr/openwin/lib/libXtst.so.1
0xf0c30000 /usr/openwin/lib/libX11.so.4
0xf0be0000 /usr/openwin/lib/libdps.so.5
0xf0a90000 /usr/openwin/lib/libSM.so.6
0xf0a70000 /usr/openwin/lib/libICE.so.6
0xf0a30000 /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000 /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000 /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000 /lib/libkstat.so.1
0xefc40000 /lib/libgen.so.1
0xefc20000 /lib/librt.so.1
0xefbf0000 /lib/libaio.so.1
0xefbd0000 /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1 localhost.localdomain localhost
#192.168.100.1 bt.lan.home bt
#192.168.100.5 jacek.lan.home jacek
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

How to upgrade oracle 32 to 64 bit on sun solaris x86 64 bit OS?

Hi,
I want to upgrade/convert 32 bit Oracle Database 10.2.0.2 to 64 bit database. Existing 32 bit database is RAC and it is running on Sun Solaris X86 64 bit OS.
First, I want to know is it possible?
If yes, then what are the exact steps?

Hi,
Such a migration can be done, just follow the steps in Metalink note 62290.1
It is important to remember that 64-bit database requires more shared pool memory so you should increase your shared pool size.
Liron Amitzi
Senior DBA consultant
[www.dbsnaps.com]
[www.orbiumsoftware.com]
Edited by: Liron Amitzi on Jul 1, 2009 3:08 PM

How to integrate a Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

How to integrate Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi
From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
For starting OMS enter: oemctrl start oms.
Hope this helps
sarath

From 7.3 on NT to 8 on Solaris x86?

Has Oracle ported Oracle8 for Solaris x86?

Hi,
usually I expect people to do a little research and I do not give everything chewed.
Point 4:
go to the
Oracle9i Database Migration Release 2 (9.2)
go to the chapter 3
Upgrading a Database to the New Oracle9i Release
go to the point:
Upgrade the Database Manually
Exactly from here:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96530/upgrade.htm#1009200
Keep in mind
1) that the EXACT procedure you are following it is not indicated in this manual
2) you have to think a little ( do you have all the windows services created on the destination system? if not, you have to create them ... )
3) this procedure is not supported by SAP. It is a valid option but not supported by them. You have to practice until you get all the points correctly

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Help with evaluation for Solaris x86

Hello,
I would like to evaluate Oracle Identity Manager and Access Manager products at the latest version possible -- the host system(s) are Solaris x86 (SunOS .5.10) Unfortunately, I am having a bit of trouble compiling the list of packages/versions to achieve this for this platform. For instance, on the downloads page it appears that OIM is not available for Solaris x86, not even in older versions(?)
Thank you in advance,
Scott

Hi Scott,
I'm pretty sure that x86 Solaris is not yet certified to run the Identity Management suite. I've been involved in an evaluation process and we ran it all on RedHat Enterprise Server Release 4 Update 5, without too many problems.
cheers,
James

Core 2 Duo and solaris x86 11/06 works for me

This is FYI, since I seen (and posted) problems, but I haven't seen the solution posted.
I have successfully gotten solaris x86 11/06 to install and run on my core 2 duo machine. I had tried solaris x86 06/06, but I could only run in 32bit mode until patch 118855-19 was installed. It looks like 118855-33 is the baseline for 11/06.
With 06/06 I had to edit the grub command and add " kernel/unix" to the end of the 2nd line. This would force 32 bit mode rather than 64 bit. If I tried 64 bit, it would enter an endless reboot cycle. Once I installed the patch to 118855-19 I could run solaris 10 06/06 in 64 bit mode without issue.
Again, since solaris 10 11/06 is at 118855-33, it runs on my core2 machine straight from the install.
Hope this helps

On a laptop there is little point with running a 64-bit operating system unless it physically has more than 4gb of ram, or if you are processing datasets exceeding 4GB of ram. Unless you're into assembly or use Solaris for some reason to manipulate media, little is to be gained by using 64-bit versions if anything. The increased pointer, integer, and padding causes more memory to use for the same software, most software on 64-bit operating systems runs in 32-bit mode because there is no need to have 16 exabyte memory addressing capability for anything but media encoders, giant databases, or extremely bloated single-threaded software. Sun Java Creator takes a heck of a lot of ram, but even at peak it's still under 4GB. If you move files bigger than 4GB, the ability to memory map all 4096MB might have less overhead on a 64-bit operating system, but generally from an end-user perspective, especially on a fast Intel or Opteron system, you won't notice the difference much. Solaris is bi-arch, a large chunk of Windows Vista and XP x64 is bi-arch, and most of FreeBSD and Linux are bi-arch in 64-bit versions, as I said, no point in making everything 64-bit. 64-bit device drivers is an issue for every OS, you should stick with 32-bit on a laptop, and hold off on desktops unless you need extended assembly registers available only in 64-bit mode.

IDM (OID/OVD/OIF) on Solaris x86 ?

Similar Messages

Maybe you are looking for