IDM server goes into recovered state

Hi everybody,
When I install a second IDM server (on another machine) that shares the same Oracle repository as the first one, I notice that the first server goes from the "active" state to the "recovered" state. This is seen under the Configuration->Servers tab.
Any ideas why this happens?
Thanks!

When you are looking into? Can you provide more info? What does the process do?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Similar Messages

ACE - TCP probe goes into INVALID state

Hello,
I have a problem with the following configuration of a sticky serverfarm with a backup serverfarm
(this setup is ofcourse used only for failover purposes, not loadbalancing):
probe tcp tcp-8888-probe
port 8888
interval 5
faildetect 2
passdetect interval 3
passdetect count 1
rserver host rsrv1
ip address 10.1.2.10
inservice
rserver host rsrv2
ip address 10.1.2.11
inservice
serverfarm host rfarm-primary
predictor leastconns
probe tcp-8888-probe
rserver rsrv1 8888
    inservice
serverfarm host rfarm-backup
predictor leastconns
probe tcp-8888-probe
rserver rsrv2 8888
   inservice
sticky http-cookie RFARM-COOKIE sticky-rfarm-1
cookie insert browser-expire
serverfarm rfarm-primary backup rfarm-backup
etc....
The problem is that every time probe state changes (from SUCCESS to FAIL or otherwise), the tcp-8888-probe on the server that changed
the state of service, goes into INVALID state:
#show probe tcp-8888-probe detail
probe       : tcp-8888-probe
type        : TCP
state       : ACTIVE
description :
   port      : 8888    address     : 0.0.0.0         addr type : -
   interval : 5       pass intvl : 3               pass count : 1
   fail count: 2       recv timeout: 10
   conn termination : GRACEFUL
   expect offset    : 0         , open timeout     : 10
   expect regex     : -
   send data        : -
                       --------------------- probe results --------------------
   probe association   probed-address probes     failed     passed     health
   ------------------- ---------------+----------+----------+----------+-------
   serverfarm : rfarm-backup
     real      : rsrv2[8888]
                       10.1.2.11    291        0          291        SUCCESS
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 0
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Thu Jun 17 22:12:31 2010
   Last fail time      : Never
   Last active time    : Thu Jun 17 21:48:21 2010
   serverfarm : rfarm-primary
     real      : rsrv1[8888]
                       10.1.2.10    0          0          0          INVALID
   Socket state        : CLOSED
   No. Passed states   : 0         No. Failed states : 0
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Never
   Last fail time      : Never
   Last active time    : Never
I have managed to get the probe into FAIL state again for a moment by removing it from serverfarm, and then reapplying, but in a few seconds it goes again from FAIL to INVAILD state, and stays in this state regardless of avaliability of probed TCP port. Only when i'm reapplying it when the port is avaliable/up, it can stay in SUCCESS state, and work till the failure of service, when INVALID state reappears.
What can be the cause of such behavior ?
thanks,
WM

Hello,
It looks very similar to this bug: CSCsh74871
You may need to collect a #show tech-support and do the following:
-remove the serverfarm in question
-reboot the ace module under a maintenance window.
You may upgrade to a higher version since your version is kind of old.
Jorge

Foundation services going into Admin state

Hello All,
Our setup is as follows:
Version: 11.1.2.3.500
Linux Server1: Foundation, OHS, EAS, APS
Linux Server2: Essbase
Linux Server3: Planning, EPMA, Calc Mgr.
Windows Server: EPMA Dimension server, FDMEE.
In our existing set up we have introduced FDMEE on Windows server, running on its own domain. After installing and configuring FDMEE, we configured Web Server on the Foundation server. Stopped all the services and now when bringing up the services, Foundation services is not starting and it is going into ADMIN State.
The errors in the FoundationServices0.log are as below:
<BEA-101371> <There was a failure when processing annotations for application workspace.war. Please make sure that the annotations are valid.
What i found quite wierd was that, when i ran the configTool for configuring Foundation found that the "Deploy to Application Server" option has disappeared.
Any ideas, how this can be fixed. Thanks in Advance,
SSP.

Hi Mady,
Here are the logs:
<Apr 17, 2015 12:45:10 PM GMT-05:00> <Info> <J2EE> <BEA-160170> <Imported library Extension-Name: epm-applistener-librar
ies, Specification-Version: 11.1.2, Implementation-Version: 11.1.2.0 for Application SHAREDSERVICES>
<Apr 17, 2015 12:45:10 PM GMT-05:00> <Info> <Deployer> <BEA-149059> <Module interop of application SHAREDSERVICES [Versi
on=11.1.2.0] is transitioning from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:10 PM GMT-05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-
app in the deployment descriptor in F:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\tmp
\_WL_user\SHAREDSERVICES_11.1.2.0\oj8n6j\interop.war/WEB-INF/web.xml. A version attribute is required, but this version
of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors
that do not specify the JEE version.>
<Apr 17, 2015 12:45:26 PM GMT-05:00> <Info> <Deployer> <BEA-149060> <Module interop of application SHAREDSERVICES [Versi
on=11.1.2.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <J2EE> <BEA-160170> <Imported library Extension-Name: xerces, Specification-
Version: 11.1.2, Implementation-Version: 11.1.2.0 for Application WORKSPACE>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <J2EE> <BEA-160170> <Imported library Extension-Name: oracle.applcore.model,
Specification-Version: 11.1.2, Implementation-Version: 11.1.2.0 for Application WORKSPACE>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <J2EE> <BEA-160170> <Imported library Extension-Name: adf.oracle.domain, Spe
cification-Version: 1, Implementation-Version: 11.1.1.2.0 for Application WORKSPACE>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <J2EE> <BEA-160170> <Imported library Extension-Name: epm-applistener-librar
ies, Specification-Version: 11.1.2, Implementation-Version: 11.1.2.0 for Application WORKSPACE>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <J2EE> <BEA-160170> <Imported library Extension-Name: epm-shared-libraries,
Specification-Version: 11.1.2, Implementation-Version: 11.1.2.0 for Application WORKSPACE>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <Deployer> <BEA-149059> <Module empty.jar of application WORKSPACE [Version=
11.1.2.0] is transitioning from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <Deployer> <BEA-149060> <Module empty.jar of application WORKSPACE [Version=
11.1.2.0] successfully transitioned from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <Deployer> <BEA-149059> <Module workspace of application WORKSPACE [Version=
11.1.2.0] is transitioning from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:27 PM GMT-05:00> <Info> <HTTP> <BEA-101363> <Application: WORKSPACE [Version=11.1.2.0], WebApp: work
space has context-root specified in application.xml: "workspace". The context-root specified in weblogic.xml: "workspace
" will be ignored.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for ap
plication /cs/epm/Oracle/Middleware/user_projects/domains/EPMSystem/servers/FoundationServices0/tmp/_WL_user/WORKSPACE_11.1.2
.0/xwh1gz\workspace.war. Please make sure that the annotations are valid. The error is com.hyperion.bpm.ContentCachingSe
rvletFilter>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149061> <Module workspace of application WORKSPACE [Version=
11.1.2.0] failed to transition from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149059> <Module empty.jar of application WORKSPACE [Version=
11.1.2.0] is transitioning from STATE_PREPARED to STATE_NEW on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149060> <Module empty.jar of application WORKSPACE [Version=
11.1.2.0] successfully transitioned from STATE_PREPARED to STATE_NEW on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'WORKSPACE [V
ersion=11.1.2.0]' due to error weblogic.application.ModuleException: Failed to load webapp: 'workspace'.
weblogic.application.ModuleException: Failed to load webapp: 'workspace'
        at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:395)
        at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
        at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
        at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
        at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
        at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
        at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
        at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
        at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
        at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
        at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.ClassNotFoundException: com.hyperion.bpm.ContentCachingServletFilter
        at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)
        at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)
        at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:64)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
        at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:179)
        at weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:43)
        at weblogic.servlet.internal.WebAnnotationProcessorImpl.processFilters(WebAnnotationProcessorImpl.java:238)
        at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:2
10)
        at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:108)
        at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1370)
        at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:452)
        at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:497)
        at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)
        at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:976)
        at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:384)
        at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
        at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
        at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
        at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:649)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
        at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
        at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
        at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
        at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
        at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
        at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
        at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
        at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149059> <Module proxyservlet of application proxyservlet [Ve
rsion=11.1.2.2] is transitioning from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149060> <Module proxyservlet of application proxyservlet [Ve
rsion=11.1.2.2] successfully transitioned from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149059> <Module epmstatic of application staticcontent [Vers
ion=11.1.2.2] is transitioning from STATE_NEW to STATE_PREPARED on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Info> <Deployer> <BEA-149060> <Module epmstatic of application staticcontent [Vers
ion=11.1.2.2] successfully transitioned from STATE_NEW to STATE ADMIN on server FoundationServices0.>
<Apr 17, 2015 12:45:49 PM GMT-05:00> <Emergency> <Deployer> <BEA-149259> <Server 'FoundationServices0' in cluster 'Found
ationServices' is being brought up in administration state due to failed deployments.>

SharePoint 2013 Workflow goes into cancelled state

I want to test a workflow that copys current list item to a new libary. But as soon as
it starts it goes into cancelled state like this:
what could be the problem?

Hi Marcsimm,
Try this
The error text that pasted indicates that you're getting access denied on workflow calling back to SharePoint.
Workflow uses signed security tokens to authenticate. The SharePoint Web Application must be claims enabled and not use Forms Based Authentication (which is a requirement of SharePoint OAuth).
Because the response header only includes WWW-Authenticate: NTLM it would seem that SharePoint is not configured for server-to-server authentication (http://technet.microsoft.com/en-us/library/jj219546.aspx)
Thanks
Sivakarunanithi

Z10 goes into hang state giving black display

Hi,
My Z10 goes into hang state very frequently. Any high graphic action and soon within a day's time system would crash and hang until reboot action is performed.
I am extremely dissapointed with the quality of z10 and from the forum it seems it is no different for z30 and other devices.
This is the second time I have started having trouble with the device and none of service centers can solve this issue. Infact they hardly understand the issue. All they do is reload software and return the device.
What is the maximum duration that a Z10 works without a reboot, be cause I see my device requiring a reboot every 3rd day. IS there a solution around?
Thanks

Another interesting observation: Post the device's reboot, PIM services takes up almost 30-60% of CPU time continuously. It starts draining up the battery.

Fresh 10.4.10 Server install keeps going into unbootable state overnight.

We have a Power Mac G5 with two 2GHz processors running OS X Server Tiger (well, or actually, it's not "running" at the moment). We'd been having some intermmttent problems, so I finally just decided to rebuild everything from scratch. Anyhow, what seems to be happening is that I'll do a fresh OS X Server install from disk (10.4), install all the updates. In the last attempt, I set up Open Directory as part of the install with Windows support, it defaulted to turning on Windows File Sharing, but I did not turn on any other services. After installing all the updates, I copied data over from a backup of the old drive using "ditto -X". I only copied data from "/Groups", "/Home" and "/Users" being careful not to copy over the new admin account. I have added no users past the required admin created in the setup, changed no other settings, started no other services, etc. I leave it overnight copying data, and finish up copying in the morning. It seems to be running great. I reboot, and it goes to a plain grey-white screen, and freezes there ... eventually I get the obligatory fans blowing like jets. If I run Disk Utility and repair and fix permissions, no errors come back on the disk, and it'll fix a few seemingly inconsequential permissions. After that, it'll boot to the Apple logo (which oddly seems to drop down a few pixels after first appearing), and then nothing till the fans kick in and that's it.
I've reset the NVRAM and PRAM. It will not boot into single user mode, do a verbose boot, etc. There are no error messages to even start to guess. The only new thing I learned this morning is that if I boot with the option key down and select the hard drive it'll give me the grey-white screen with an icon with a circle and a line through it. The drive does exactly the same thing (won't boot) if I put it in any other PowerMac G5. The filesystem on the drive appears to be perfectly intact. The system has just passed the extended Apple Hardware Test.
The only other thing to add is that it has been doing this same behavior repeatedly over the past week. Each time, I've been doing less and less, restoring less data, and every time, the same result. I'm only finally posting because, well I figure if I can't even just copy over user-level data to a fresh OS install, something is really messed up.
The only guess I have is that it seems like this is happening overnight, and maybe something in the nightly cleanup services that get run is making the system unbootable? I looked in the system log files and nothing this serious seemed to be there.
Any help would be greatly appreciated. I'm pretty much out of ideas/options. Seems like there ought to at least be a way to figure out where in the early boot process it's failing.

I keep assuming they are going to want to charge for this (we're about 3-4 months out of the 3-year Apple maintenance plan). Honestly, I've about reached the point where I don't see how this can't be a significant, albeit obscure, flaw in OS X Server, and I don't think one should pay Apple to fix what appears to be their problem. If nothing else there is a complete lack of debugging info, partly understandable for being that early in the boot process (though sticking the Apple logo on the screen is apparently important enough); then again, that early in the boot process, the code should be refined enough that these kinds of problems shouldn't occur.
I had tried your suggestion of blessing the CoreServices folder (I may have actually done it before posting the first time). At one point I also cleared out the kernel cache, but none of it seems to make any difference. Does the Apple logo get drawn in BootX? I've had a hard time finding a detailed description of the boot process (some pages seem to contradict each other), and there doesn't seem to be any easy way of debugging it. It seems like I could get it into various states of drawing the white screen, usually it gives me the Apple logo, but some times it'll just go plain white, and once I got it to give me the circle with the line through it.
For example, this page says the Apple logo and spinning cursor all happen at thee same time:
http://www.kernelthread.com/mac/osx/arch_boot.html
You suggest the spinning cursor happens a bit later. Apple doesn't even seem to have a page on this.
Then again, I could spend a bunch of time debugging BootX, device driver and kernel loading ... and then I'm still left with the, what does copying non-system files over to the disk have anything to do with it?

Server goes into constant Full GC loop after running for a day

This is a servlet application running under Resin, with Java hotspot 1.5_13 on Linux 64bit OS. JVM args are:
-verbosegc -Xms8G -Xmx8G -XX:NewSize=512m -XX:MaxNewSize=512m -XX:+TraceClassUnloading -XX:+UseParallelGC -XX:PermSize=512M -XX:MaxPermSize=512M -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:+DisableExplicitGC
After running for a day or so, the server goes in to constant Full GC every few seconds, essentially hanging the server. Here is an excerpt of the JVM log:
127731.579: [Full GC [PSYoungGen: 156635K->0K(352576K)] [PSOldGen: 7751937K->2260734K(7864320K)] 7908573K->2260734K(8216896K) [PSPermGen: 62855K->62855K(524288K)], 5.2972428 secs]
127737.596: [GC [PSYoungGen: 179328K->157147K(351040K)] 2440062K->2417881K(8215360K), 0.1275439 secs]
127739.066: [GC [PSYoungGen: 336475K->155824K(355136K)] 2709605K->2683786K(8219456K), 0.1729460 secs]
127740.502: [GC [PSYoungGen: 340464K->169143K(353792K)] 2980821K->2836693K(8218112K), 0.1914048 secs]
127741.562: [GC [PSYoungGen: 353783K->166305K(345344K)] 3021333K->2860977K(8209664K), 0.1367291 secs]
127742.973: [GC [PSYoungGen: 340908K->153430K(349568K)] 3147976K->3124907K(8213888K), 0.1970560 secs]
127743.946: [GC [PSYoungGen: 328278K->156065K(349568K)] 3299755K->3277928K(8213888K), 0.1868634 secs]
127745.498: [GC [PSYoungGen: 330183K->156854K(349568K)] 3564442K->3545105K(8213888K), 0.1836370 secs]
From the log it seemed that the memory usage jumped by 150M to 250M within 1.5 second, even when the user traffic was very light (a couple of page views a second, vs. 10 page views a second at peak). The same app was running fine for many hours on a Windows dev machine in load testing condition with about 300M heapsize. No memory leakage was found so far. (it would be pretty unlikely to have such a large memory leakage without being noticed in dev and testing)
Thanks for any help.
Edited by: tuxzilla on Nov 16, 2008 11:43 PM
Edited by: tuxzilla on Nov 16, 2008 11:46 PM

A NewSize of 512m seems small for an 8G heap. This would probably cause most objects to be rapidly tenured into the OldGen heap space. (Ultimately depends on your application.) You might consider either using a NewRatio in place of NewSize/MaxNewSize or not use either and instead see how the jvm handles things itself with"-XX:+UseAdaptiveSizePolicy"
VisualVM is a good graphical tool for watching gc activity.
NewRatio=1 is the largest you can go for Eden, which will set (Eden and survivor spaces) equal to oldGen space. ie, for 8G, 4g each.
Watch activity in the gc tool, you will see "sawtooth" activity. If your sawtooth pattern does not maintain a flat profile, then you have in fact have a memory leak.

Queue goes into 'READY' state

Hi All,
I'm using the 'TRFC_SET_QIN_PROPERTIES' function module with the qin_name parameter.
The problem I'm facing is that, most of the times, my function module entry goes into the queue - but the queue is in 'READY' state. I have to manually go to SMQ2 and make a change to put the queue into 'RUNNING' state.
Is there a way to automatically set the queue to 'RUNNNING' state when i insert an entry into the queue? Or, is there a seperate API that can do this task for me?
Regards,
Ram

Hello Jeff, the agents on an active call will not count for the Not Ready state. When receiving the call (ringing) they will be placed in Reserved state; while the call is connected they will be in Talking state and after the call ends they could be placed in Work state for a while.
HTH
Pablo

My root management server goes to grayed state frequently

Hi All,
I have a strange issue with my SCOM 2007 R2 CU4.
My management server grayes out frequently and when i check the operations manager console it throws me these two errors. Can anyone give me a solution for this.
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Microsoft.EnterpriseManagement.Common.UnknownAuthorizationStoreException: Unable to perform the operation because of authorization store errors. ---> System.Runtime.InteropServices.COMException (0x800705AA): Insufficient system resources exist to complete
the requested service. (Exception from HRESULT: 0x800705AA)
at Microsoft.Interop.Security.AzRoles.IAzApplication2.InitializeClientContextFromToken(UInt64 ullTokenHandle, Object varReserved)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AzManHelper.AccessCheck(String accessCheckContext, Int32[] operationIds, IntPtr hToken, String stringSid, Int32[] accessCheckReturnCodes, List`1[] accessCheckScopes)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.InstanceSpaceOperations.GetMonitoringObjectByMonitoringObjectIds(List`1 monitoringObjectIds, String languageCode, MonitoringObjectMode monitoringObjectMode)
at Microsoft.EnterpriseManagement.ManagementGroup.GetPartialMonitoringObjects(ICollection`1 ids)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.TaskPaneContext.GetManagedEntities(ICollection`1 items)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.TaskPaneContext.UpdateContextJob(Object sender, ConsoleJobEventArgs args)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
System.Runtime.InteropServices.COMException (0x800705AA): Insufficient system resources exist to complete the requested service. (Exception from HRESULT: 0x800705AA)
at Microsoft.Interop.Security.AzRoles.IAzApplication2.InitializeClientContextFromToken(UInt64 ullTokenHandle, Object varReserved)
at Microsoft.EnterpriseManagement.Mom.Sdk.Authorization.AzManHelper.AccessCheck(String accessCheckContext, Int32[] operationIds, IntPtr hToken, String stringSid, Int32[] accessCheckReturnCodes, List`1[] accessCheckScopes)
====================================================================================
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Microsoft.Mom.Isam.IsamOutOfMemoryException: Out of Memory (-1011)
at Microsoft.Mom.Isam.?A0x5359b89f.HandleError(Int32 err)
at Microsoft.Mom.Isam.EseInterop.JetGetIndexInfo(JET_SESID sesid, JET_DBID dbid, String table, String index)
at Microsoft.Mom.Isam.IndexCollection.get_Item(String indexName)
at Microsoft.Mom.Isam.Cursor.get_CurrentIndexDefinition()
at Microsoft.Mom.Isam.Cursor.MakeKey(Key key, Boolean end)
at Microsoft.Mom.Isam.Cursor.GotoKey(Key key)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Cache.EseCursor.Find(Object[] values)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.MPImageCache.RetrieveImageIdFromCache(CacheTable classToImageMapTable, ManagementPackElementImageKey imageKey, Guid& imageId)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.MPImageCache.GetImageCore(CacheSession session, ManagementGroup managementGroup, ManagementPackElementImageKey imageKey, Guid& imageId)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.MPImageCache.GetImageJob(Object sender, ConsoleJobEventArgs jobArgs)
at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Screenshot of the error:
Also i restarted the health service and the health service fails to start below is the screenshot of that.
Analysed the event logs and found the below:
Event id 29104 - OpsMgr Config Service failed to send the dirty state notifications to the dirty OpsMgr Health Services. This may be happening because the Root OpsMgr Health Service is not running.
Event id : 4000 - A monitoring host is unresponsive or has crashed. The status code for the host failure was 2164195371.
Event id 4503 - A module reported an error 0x8007000E from a callback which was running as part of rule "_44E9A997_6A02_4298_8430_8E01952AB6F3_.RaiseAlert" running for instance "Root managementserver FQDN" with
id:"{6C3444C3-3990-BB5A-F25E-289D8F427570}" in management group "CINSCOM".
Event id - 21044 - The OpsMgr Connector cannot uncompress package, received from IP XXXXXXXXXXXX
Event id 1103 - Summary: 28 rule(s)/monitor(s) failed and got unloaded, 0 of them reached the failure limit that prevents automatic reload. Management group "CINSCOM". This is summary only event, please see other events
with descriptions of unloaded rule(s)/monitor(s).
26380 - The System Center Operations Manager SDK Service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
at Bid.TraceError(String fmtPrintfW, Object a1, Object a2)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlRetryHandler.Execute[T](ExecuteArguments executeArguments, RetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.Mom.DataAccess.SqlRetryHandler.ExecuteReaderSingleRow(SqlDataReader sqlDataReader, SqlConnection sqlConnection, IList`1 prologEpilogList, RetryPolicy retryPolicy)
at Microsoft.EnterpriseManagement.Mom.DataAccess.QueryResultsReader.Read()
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.ClientReaderManager.GetObjects(Guid id, Int32 count)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccess.GetObjectsFromReader(Guid readerId, Int32 count)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessTieringWrapper.GetObjectsFromReader(Guid readerId, Int32 count)
at Microsoft.EnterpriseManagement.Mom.ServiceDataLayer.SdkDataAccessExceptionTracingWrapper.GetObjectsFromReader(Guid readerId, Int32 count)
at SyncInvokeGetObjectsFromReader(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
at System.ServiceModel.Dispatcher.ChannelHandler.DispatchAndReleasePump(RequestContext request, Boolean cleanThread, OperationContext currentOperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.HandleRequest(RequestContext request, OperationContext currentOperationContext)
at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result)
at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)
at System.ServiceModel.AsyncResult.Complete(Boolean completedSynchronously)
at System.ServiceModel.Channels.FramingDuplexSessionChannel.TryReceiveAsyncResult.OnReceive(IAsyncResult result)
at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)
at System.ServiceModel.AsyncResult.Complete(Boolean completedSynchronously)
at System.ServiceModel.Channels.SynchronizedMessageSource.SynchronizedAsyncResult`1.CompleteWithUnlock(Boolean synchronous, Exception exception)
at System.ServiceModel.Channels.SynchronizedMessageSource.ReceiveAsyncResult.OnReceiveComplete(Object state)
at System.ServiceModel.Channels.SessionConnectionReader.OnAsyncReadComplete(Object state)
at System.ServiceModel.Channels.StreamConnection.OnRead(IAsyncResult result)
at System.ServiceModel.Diagnostics.Utility.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)
at System.Net.LazyAsyncResult.Complete(IntPtr userToken)
at System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
at System.Net.Security.NegotiateStream.ProcessFrameBody(Int32 readBytes, Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.NegotiateStream.ReadCallback(AsyncProtocolRequest asyncRequest)
at System.Net.FixedSizeReader.CheckCompletionBeforeNextRead(Int32 bytes)
at System.Net.FixedSizeReader.ReadCallback(IAsyncResult transportResult)
at System.ServiceModel.AsyncResult.Complete(Boolean completedSynchronously)
at System.ServiceModel.Channels.ConnectionStream.ReadAsyncResult.OnAsyncReadComplete(Object state)
at System.ServiceModel.Channels.SocketConnection.FinishRead()
at System.ServiceModel.Channels.SocketConnection.AsyncReadCallback(Boolean haveResult, Int32 error, Int32 bytesRead)
at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)
at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
======================================================
Below is the configuration of the server:
Windows server 2008 r2 enterprise (Without SP1)
SQL server standard edition 2008.
Intel Xeon 2.6 Ghz (2 Processors) Totally 8 cores.
12GB Physical memory (Always 95 - 98% used)
427 agents being monitored (Exchange 2010, Blackberry etc)
All the roles (SCOM, RMS, SQL all are in the same box)
Can anyone please help.
Gautam.75801

Did you install some software before this issue appeared? If yes, you need to uninstall it because May be there is conflict software.
Also for event 29104, you can refer below links
http://blog.tyang.org/2011/09/30/event-id-29104-on-scom-rms-cluster/
http://support.microsoft.com/kb/946417/en-us
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

After working fine for over a year, 160 quits working and goes into recover

So, I've had my 160gb iPod for awhile, and it has basically worked fine for a while.
Occasionally, it skips, but I just said whatever, and let it be.
Anyway, today I listened to it frequently, and it started to take about 15 seconds to actually start a song that I picked. So eventually, I became tired of it.
I went to play one song, and it skipped it and the other tracks after it.
I had this problem before, but after converting them to .m4a they worked fine.
However, these songs were already .m4a, so there wasn't too much I could really do.
So, I decided to restart the iPod with the standard Hold on off, select-center button at at the same time thing.
And then I tried to turn it back on, and when I did, it informed me that I needed to restore the iPod.
It showed me a snazzy picture of the USB cable, and explained it to me in a few in a few other languages.
So, I plugged it into the computer to try and get around it, and it informed me that the iPod was in recovery mode?
I've never heard of this, and I ultimately have no idea what to do. I don't want to have to restore, but I guess I'm going to. I'd really like to know why it freaked out on me though.

See if this helps.
iTunes has detected an iPod in "recovery mode".

Sporadic issue: connections to server going to SYN_RECV state

Hello all,
I am facing this sporadic issue with my rmi server for the past few months. I have tried searching the internet world for any help but did not come across any solution that’s of help. Any help from you on this would be much appreciated!
Our rmi server is accessed by 100-200 clients at any point in time. 99% of the times, the server just works fine except suddenly it kind of hangs i.e., no new connections can be made from clients. The connection attempts from clients fail with error "SocketTimeOutException: read timed out" and on the server, the tcp connections are observed to be in SYN_RECV state (from netstat output). Server is running on Redhat linux and clients could run on any of windows, linux and mac. The frequency of the issue is random with once in few months to multiple times on a single day - the average is 2-3 times a month. After restarting the server, everything starts to work fine again.
On one such an event, we were able to talk to our network guys to get tcpdump trace logs on server port. Analyzing the dump, the following is the behavior
client -> SYN -> server (server accepts)
server -> SYN/ACK -> client (client accepts)
client -> ACK -> server (server does not accept)
server -> SYN/ACK -> client
client -> ACK -> server (server does not accept) . This is repeated 6 times based on tcp retry setting
server -> RST -> client (client gets timed out error at this point)
I am no expert of tcp and so for me, the strange thing is to see ACK message at the server port yet server resending syn/ack messages. Could you tell me what this behavior could mean? Any guidance towards debugging this issue will be really helpful.
Thanks in advance
PS: I am a newbie to forum so please feel free to let me know if I my post has any issues w.r.t forum decor/guidelines etc

I think you have an intermittent hardware problem somewhere in a router or switch in this path.

Role when transported goes into Ungenerated state in Quality.

All,
I have a SCM system - 5.1
When I build a role, generate it on Development box it gets generated, but when transported to Quality it is in ungenerated state.
Associated Analysis authorization is also trasnported correct.
I have checked all the logs, there are no errors.
Org. Values match on both the systems.
One observation is when the system was upgraded, they did not complete the SU25 steps, is this the one that is causing the issue or not.
Your advice will be helpful.
Vidyar.

I have a big task as the upgrade was done 2 years back and I started with the project now
How they survived this long?
This problem is hapening for all the roles you are transporting? Or for few random roles?
Regards,
Arpan Paik

Digital Signature Validation process goes into unending state

Hi all
I am working Adobe Digital Signatures in Web Dynpro Java applications. I have been using [this|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/media/streamingmedia/developer-areas/user-interface-technology/interactive-forms/securing%20online%20interactive%20forms%20by%20adobe%20(Session%208)/index.html?slide=] webinar to follow steps to configure SSL and validation of Digital Signatures.
After doing all necessary configurations, I am able to run my web dynpro applications containing interactive forms in secure mode.
But when I sign with digital signature and try to validate the form, the application keeps on processing and shows no result.
I tried debugging my application but control does not reach my button action code. I am clueless.
I would be thankful to receive any hints or pointers from you.
Thanks in advance.
Kapil

Following blog discusses solution to this prob
/people/kapil.kamble/blog/2009/07/08/experimenting-with-digital-signatures-in-sap-interactive-forms-by-adobe
Kapil

Operations Manager Failed to Access the Windows Event Log and management server is showing warning state

Hi,
I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
again and again i.e. Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
Most recent error details: The RPC server is unavailable.
Please suggest me how to resolve this so that my management server will again come back in healthy state.
Thanks
Abhishek

Hi Abhishek,
As i mentioned earlier the Alert resolution says the same points.
Can you give details on the below ?
Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
Did you recently configure any new alert where you mentioned "Dhcpadminevents"
as a event log location ?
If yes then what is the target you selected for the rule / monitor there ?
Can you post the results for analysis ?
Gautam.75801

BPEL Composite going in running state

I have a mediator that reads from AQ and routes it to the BPEL processes based on condition. When there are 15 or 20 instance read from AQ, some of the BPEL processes go into a running state. Once the process goes into a running state, the any instances created for that bpel process goes into running state. There are no errors in the soa-diagnostics log or soa log. We are running WLS server in a single node environment, database installed in a single solaris container and the wls installed in another container. There are no faults generated too. If I redeploy the process, the BPEL process starts working and goes to the same state after some time ( inconsistent). Even if I restart the soa server, the process starts working but goes to running status when load is applied.
Any help to diagnose the issue will be greatly appreciated.

Just to be sure, you say the problem happened only if you have 10-15 instances?
Yes.. Even if it less that 5 but if there are concurrent calls, the problem persistIn each process you have 1 call for each service (EBS,WS,BpelProcess)?
One BPEL process calls an EBS package( Dbaadapter), Web services each of them are BPEL process
1st invoke web service call ( which is BPEL process) 2nd invoke is a dbadapter 3rd invoke is service call ( BPEL process)Did you change any of the default parameters on the SOA server, or DB connection?
>>
You might consider a problem with the EBS - maybe you are calling an API and there is a db lock...?
All the queries are only selects. No updates and these apis are tuned.Enter the current running instance - see if the last service is the same for all running instances.

IDM server goes into recovered state

Similar Messages

Maybe you are looking for