IDM7.1- Synchronization with ABAP and JAVA

hi all
we are planning to Integrate EP(datasource: LDAP) and CUA/ABAP system with IDM7.1.
Can somebody tell me How IDM takes care of CUA syncrhonization with LDAP and EP. Synchronization is obsolete or its done by IDM internally.
Please suggest us.
regards

Hi Jai,
1) Connection establishment between LDAP, EP & ABAP.
2) We define a Synchronization Job in IDM to sycn data between all the above
3) When there is a change in LDAP or ABAP, Event Agents (out-of-box idm) detects the change and runs the synchronization job.
How to define the synchronizaiton job is depends on the requirement.
hope the above helps you.
regards
Anand.M

Similar Messages

ADS in ABAP and JAVA on different servers

Dear community,
I need to run ADS with ABAP and JAVA on different servers but after read and apply every step on The ADS Configuration Guide, still getting doubts and problems. Those steps work succesfully on a server with ABAP+JAVA on same server. Those are the problems:
When I perform the report test FP_TEST_00 i get this error:
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
I haven't found a a detailed procedure to set on ABAP and JAVA on different servers...
Do you know any procedure to set this scenario??
As a result, I don't know which role i must assign to adsuser on Java UME because i did not found any SAP_ADSCALLER role as i have ridden on some forums or blogs...
I try to set ADS on ABAP+JAVA on different servers by this official guides:
The ADS Configuration Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
The ADSConfiguration Guide for Print Scenarios
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04ef746-4c89-2a10-0f8e-eb2b3460fb7c
Thanks in advance
Kind regards
Scottie

HI again,
ADS_AGENT now has sap_all but still same problem:
Creating or Changing the Destination Service, On Visual Administrator/Destinations/HTTP/ FP_ICF_DATA_<SID>
When I set the URL http://<hostname>:<HTTP_port> i am getting error Received HTTP response 502
- If I paste the http://<hostname>:<HTTP_port> +
- Enter the appropriate client number of the system, where the service user ADS_AGENT exists into the client field. Keep the other fields System ID and Language empty +
- Under Logon Data, choose BASIC in the Authentication field. +
- Enter ADS_AGENT in the Username field and enter the same password as given for this service user in the SAP NetWeaver AS ABAP in the Password field
- Choose Save and Test and Received HTTP response 502 appears.
But if I paste on Explorer http://<hostname>:<HTTP_port>/sap/bc/fp/form/layout/fp_test_00.xdp, request User (ADS_AGENT) +Pwd and work ok, so error only appears by Visual Administrator...
Anybody knows how can resolve this doubt?
Thanks in advance

MDM with separated ABAP and Java Instance

We installed SAP ERP system with SRM server and Portal as Java instance.
We use Oracle and have 2 oracle schemas/instances: ABAP and Java.
After mounting of MDM server and DBMS configuraiton (to Java instance) we have the following oracle objects:
Oracle Schema A2I_XCAT_DBS
2 oracle users: A2I_XCAT_DBS (owner of the schema) and MDMADMIN
2 tablespaces A2I_A2I_XCAT_DBS.DBF and A2I_A2I_XCAT_DBS_IX.DBF within the main dbs directory E:\oracle\<sid>\102\database
The used tablespace was set to PSAPTEMP
Questions:
1) How can the DBMS configuration will be removed, because the oralce path E:\oracle\<sid>\102\database was wrong
Unfortunately we would like to avoid merge MDM and Portal data in one and the same tablespace PSAPTEMP
2) Where can we find the oracle configuration for MDM with Java Schema, but using their own tablespace?

Are you basically trying to put a new User Interface (UI) on top of MDM because you do not want to use the standard MDM UI? If so, then yes you could write a custom WebDynpro and use the MDM API. We evaluated WebDynpro as an option, but instead we built a new Adobe Flex based UI that sits on top of the MDM Catalog and it totally awesome! There is a sample on our website (www.simplifying-it.net), but we are making some changes to the look/feel... however, the sample demo on the website should give you an idea.
If you have any questions, please let me know.
Thanks,
Mark

Short dump Error during VM container communication between ABAP and JAVA.

Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
    Error during VM container communication between ABAP and JAVA
Information on where terminated
    Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
    The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!

hi Willie,
     this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text                                                                                        |
|    Error during VM Container communication between ABAP and JAVA.                                |
|What happened?                                                                                    |
|    The current program had to be terminated because of an                                        |
|    error when installing the R/3 System.                                                         |
|    Error in the RFC layer.                                                                       |
|What can you do?                                                                                  |
|    Note which actions and entries caused the error to occur.                                     |
|                                                                                                  |
|    Consult your SAP administrator.                                                               |
|                                                                                                  |
|    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
|    and retain termination messages for longer periods.                                           |
|Error analysis                                                                                    |
|    An error has occurred in the RFC layer during communication between                           |
|    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
|    between the two stacks.                                                                       |
|                                                                                                  |
|    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
|    Return code = -1007                                                                           |
|    Pointer    = "000007DD348F6138"                                                               |
|How to correct the error                                                                          |
|    Check whether the VMC is active on your application server. To do this,                       |
|    run transaction SM52. If the VMC is not active, contact your SAP                              |
|    administrator.                                                                                |
Regards
Charles

WebDynpro with ABAP or JAVA?

Hi all,
I am a veteran in ABAP. I wish to learn web dynpro. I never worked on JAVA. Can anybody advice me which programming language i should use to learn WebDynpro development. Also let me know which companies have webdynpro projects in India?
Thanks in advance..

Hi Buddy,
         Welcome to intresting world of Web Dynpro.
         As veteran ABAPer you should go for WebDynproABAP .
         Now why ?
Point 1:
In my view WebDynpro ABAP and Wd Java are not same.
Basically WebDynpro ABAP and Java are two different webDynpro provided by NetWeaver Stack.
Basic conceptual base of WD ABAP and WD Java is same.I mean to say concepts like Context binding , node , elements , Layout both support are same.
But when you provide background functionality to your Web Screen then Java or ABAP come in to picture.Just take case , you want do some thing on click of some button then
1) in case of java may you will call some ejb or you will may write some java code on click.
2) but in case of WD ABAP you have to do same thing with ABAP classes . You will call some call or some method of some system defined class.
Ulimately point I want make
1) WD ABAP and WD java 's Base is same but you code in completely different way.
2) Purpose for which SAP came with two different WDynpro is different. Java can be used for developing quite sophistcated Web services.
Point 2:
another help for you .Just go thr' following thread
How much of oops ABAP is required for ABAP Webdynpro .
Point 3:
You can start with tutorials and all
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]

WebDispatcher on ABAP and JAVA on serperate Servers

Hi all,
i read a lot of hours trough post concerning issues about web dispatcher, but i didn't find anything that suits my problem.
We have a MSCS-Cluster. One Node has the db which is for ABAP and JAVA (different schemas).
Than we have an SCS for ABAP and one for JAVA.
So the ABAP and JAVA-Instances are physically separated.
Now we want to use a web dispatcher to pass the requests to the right destination.
But i am not sure how to set it up. Do we need 2 dispatcher, or can one handle the requests. How does the dispatcher knows, where to redirect the requests ?
Is that done with the parameter icm/HTTP/redirect_<xx> ?
in hope of any advise to this problem
yours
BjoernTrabes

So, i tested around a little bit.
i am not clear with the function of the dispatcher.
When i bind the ABAP Dispatcher, than all requests to /sap/ are handled by the ABAP-Stack an are working, but when i browse to an Adress like /irj/portal/ the dispatcher says that the Adress is noch reachable.
When i bind the dispatcher to the Java-Stack, than all Java-Adresses work, but the /sap/ not, which is the ABAP Stack.
so, i don't know exactly where my fault is.
How knows the Dispatcher, where the ABAP or JAVA-Stack is.
On an other Machine where the java is an add-in, it works quite well, but on this server the abap and Java Servers are physically separated.
greets
Bjoern
Edited by: Björn Trabes on May 18, 2009 10:59 AM

Links for ABAP and JAVA Admin + Troubleshooting

Hi Gurus,
Can anyone send me the useful links for Admin + Troubleshooting in SAP BASIS i.e. ABAP and JAVA ?
Also, which are the Routing Maintenance Tasks in SAP BASIS ?
Any / All help is most welcome and would be rewarded with suitable points.
Many Thanks in Advance ,
Regards,
- Ishan

Hello Balaji,
Yes, you can connect the JAVA user adminsitration with the Single CUA.
Make use of the JAVA UME feature for this.
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
Regards,
Ammey Kesarkar

Install ERP ECC 6.0 with EHP4 and JAVA stack (usage type)

Hi all,
I need to install ECC with EHP4 and also JAVA stack.
I know that I have to install 2 stacks with different SID and oracle homes, firts I have to install ABAP stack and then the JAVA stack, but wich usage type should I choose for JAVA STACK?
What I would like to have in my new installation would be the same usage type for JAVA stack like ERP 6.0 SR3 ABAP+JAVA stacks.
What should I choose?
Regards
Thanks

Hello,
SAP ECC 6.0 allows ABAP and JAVA but EHP4 this feature is not.
One thing I can suggest if you install ABAP stack first, it will initiates (even different SIDu2019s) the JAVA stack also.
So JAVA stack having a protection with ABAP, because you know JAVA stack is a very sensitive and time consuming one when you want to start are stop.
So you can do this sequence
Suresh

RSPOR_SETUP = Different ABAP and Java support packages.

Hi all,
We have an ECC 6.0 system with abap+java stacks. When we run the RSPOR_SETUP report we get this error:
Different ABAP and Java support packages. Combination of support packages invalid
And with some more clicking we find this:
6. Compare version information of Java support package (com.sap.ip.bi classes) with ABAP support package (SAP BI)
   ABAP Support Package:                  13
   Java Support Package:                   0
On the Java stack we see (among others) these components:
sap.com       BI-IBC       7.00 SP12 (1000.7.00.12.0.20070509050058)
sap.com       BI_MMR       7.00 SP12 (1000.7.00.12.0.20070507084106)
sap.com       BI_UDI       7.00 SP12 (1000.7.00.12.0.20070507084125)
sap.com       BI-BASE-S       7.00 SP12 (1000.7.00.12.11.20080324092518)
sap.com       BI-WDALV       7.00 SP12 (1000.7.00.12.1.20071105133039)
sap.com       BI-REPPLAN       7.00 SP12 (1000.7.00.12.3.20080104101916)
So I believe all components are correctly installed.
What are we doing wrong?

Hello.
Please be aware, that report RSPOR_SETUP should NOT be used with a Netweaver 04s system. This report has been replaced by the support desk tool. I request you to run the support desk tool as per note 937697 to check if there are any configuration issues in your system.You can resolve any red traffic lights that might be reported by the tool by following the corresponding actions suggested.
I hope I can be helpful.
Thanks,
Walter Oliveira.

ABAP and JAVA stack together?

Hello Friends,
I wanted to install the ABAP stack SP12 with JAVA stack SP09. I am downloading the last file of the stacks. Is it possible to install them together on one OS(I have W2K Enterprise Edition)?
Can you guys please help me out here ?
Best Regards,
Fatih Koekce.

Hi
Basically ABAP and Java patches would be inpendent of each other except the Kernel.
You can apply them together as Java patches are to be applied through JSPM and ABAP patches through SPAM, but it is usual practice to apply ABAP patches first and go ahead with Java stack. Because Applying them together would use considerable amount of system resources.
Hope this is helpful.
Regards
Rahul

Individual business system for ABAP and Java Stack

Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
Jerome

Are you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana

Error during VM container communication between ABAP and JAVA

Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul Mandale

Thanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno      04
M sid        CUS
M systemid   560 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    52
M intno      20050900
M make:      multithreaded, Unicode, optimized
M pid        456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c   1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          18304     (1408)
M DpShMCreate: sizeof(tm_adm)          3954072     (19672)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm)          528064     (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1452)
M DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1   0619F158   061A46F4   061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA          (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA          (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM               (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM          (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM   (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA   (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR   (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S    using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B     max_blocking_factor = 15, max_in_blocking_factor      =   5,
B     min_blocking_factor = 10, min_in_blocking_factor      =   5,
B     prefer_union_all    =   0, prefer_join                 =   0,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B     convert AVG         =   0, alias table FUPD            =   0,
B     escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B     select *            =0x0f, character encoding          = STD / <none>:-,
B     use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.52.20050900]
W    ITS Plugin: Int.version, [32]
W    ITS Plugin: Feature set: [10]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2.

New Server for Preview SAP WAS ABAP and Java

Hi
I wish to purchase a new PC or server to specifically house my ABAP and Java preview installations rather than have them running on an old PC and laptop.
Anyone out there got some recommended configurations? Max spend will be £1500.
Cheers
Ian

Ian,
Personally I wouldn't be happy running a server 24/7 at home but would want to just switch it on and the server start so would be looking to have some sort of script to run the relevant WAS instances automatically on startup.
160Gb hard drives would be ample. Could consider increasing the storage and then the system could double up as a backup device as well as a SAP server.
I've built systems in the past and that's the approach I'd take for this too. I don't mind buying pre-built systems but I
detest all the rubbish software they bundle with them. If you build it yourself you can install just Windows and it'll run like a dream.
This bundle looks interesting:
http://www.overclockers.co.uk/showproduct.php?prodid=BU-039-OK
The motherboard takes four memory modules so the 2Gb would consume two of these allowing for upgrades in the future if deemed necessary. Add in a couple of HD's, a DVD-RW, a cheap gfx card and a case and you'd easily get change from £800. Could spend a bit more to get more silent components too.
Now I've had a look around and priced them up I'm even more tempted!!!
Cheers,
JB

Level of Knowledge in ABAP and Java?

Hi All,
I am seeking a career in SAP Netweaver Process Integration - XI and would like to know what level of knowledge would i need to have in ABAP and Java. If i should have any what are the area's that would be expected. Please Clarify.
Your advice will be greatly appreciated.
Thank You,
Ajay C Indukuru.

Hi Ajay
in addition to chirag's comment
We use ABAP Proxies in case of we are dealing with the ABAP Based Applications
We use JAVA Proxies in case of we are dealing with the JAVA based application
in SAP XI We have two ways of connectivity
1) adapter
2)proxy
in applications based on WAS 6.20 or above we can directly communicate to XI through Proxies
while application based on below WAS 6.20 you have to use adaptyer to communicate to XI
proxies seperate business application logic from the integration logic of integration logic
proxy generation converts non language specific interface description in WSDL into executable interface
Java proxy is generated from the WSDL description opf interface and this is generated as a JAR file in IR
while ABAP proxy is generated by transaction SPROXY
on Application server based on WSDL description of message interface
PROXIES have same mode and direction as Interfaces have
To learn Java you should know only basic concepts of java means you must have basic java programmin skill
Java proxy can be generated through wizard also this is an inbuild functionality of SAP XI
to lear java follow this link
java.sun.com/docs/books/tutorial/
To learn ABAP you should know beginner level ABAP4GL
ABAP is very simple language and coding is like that you are writing simple english sentence so you would be feeling comfortable withABAP with a little practice
GO to T CODE se24 and start developing
learn ABAP with this link
http://www.itquestionbank.com/sams-teach-yourself-abap-4-in-21-days.html
for more advance version you may follow SDN
in my opinion nothing is so hard to learn
i hope this may assist you
if helpful kindly reward points
Regards
Sandeep Sharma

Upgrade of CRM 5.0 abap and java

Hi,
I have to upgrade CRM 5.0 to CRM 7.0 with EhP1. In my system landscape, CRM 5.0 ABAP (CRA) and CRM 5.0 Java (CRJ) are installed on different servers. CRJ is a portal available for end user for which CRA is acting as backend server and database. I have experienced that when we install CRM 7.0, installer automatically creates 2 seperate instances each for abap and java. I am not able to presume what exactly will happen in this kind of upgrade. My doubts are:
1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
Kindly help.
Thanks.
- gaurav

Hi,
> 1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
Yes. You need to upgrade both the servers separately. You need not to reconnect it as both the systems are already connected with each other.
> 2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
> 3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
>
No, new instance will be created. You need to upgrade CRA and CRJ separately. WEBUI will be automatically upgraded.
Thanks
Sunny

IDM7.1- Synchronization with ABAP and JAVA

Similar Messages

Maybe you are looking for