Idml open and idml Save As crash InDesign CS6 8.0.1

I am using:
2012 MacMini
Mac OSX 10.8.3
2.6 GHz Intel Core i7, 8 gb 1600 MHz DDR3
InDesign CS6
Version 8.0.1
I have run software update
Opening an idml file crashes InDesign.
Saving a file to idml crashes InDesign.
Assistance would be very much appreciated.
Thank you.

Via Font Book, I checked all fonts with pro in the name. All appear OK.
I created a new document with nothing in it with same result. My crash report (http://pastebin.com/Rgd5AAHZ) was a little different under VM Regions.
Do you believe a re-install would solve the issue?
Thanks again for your help. It is appreciated.

Similar Messages

Help my safari doesnt open and gives me a crash report

help my safari doesn't open and gives me a crash report ever since i downloaded a file from the internet. I have a macbook air (early 2014) with running os x yosemite version 10.10.1

There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

When will we be able to open and edit PDF documents in Indesign?

Hi
It would be nice if Indesign could open PDF files.
When will this happen (without a plugin)?
Today I need to open the files in Illustrator. The customer prefers to use Indesign, so even though Indesign can export pdf documents I will have to tell the customer and the program can not open pdf files. This I find really weird.
Hopefully opening and editing pdf files in Indesign will happen real soon.
Have a great day!

Paal, I'm sorry for that little out-lash. There is nothing wrong with inquiring the feasability of a new feature. The problem is that PDF has been an "output intended format" from the very beginning.
An Illustrator file (from a fairly modern version) also is a PDF file, for all intents and purposes. You can rename an .AI file to .PDF and use it anywhere, with any software that supports PDF (so that's excepting Apple's Preview, probably ;-) ). Moreover, you can still open and edit this PDF with Illustrator and get all of your objects, symbols, layers, paragraph styles, and guides back!
That's because in fact this file *contains* all this extra information in a data block marked "For Private Use Only". Other software, if adhering to Adobe's PDF specs, will simply ignore this (and thus my little jab at Apple's Preview). Does that mean you can edit such a PDF with *any* software? No -- the Illustrator data is "proprietary", and the details are not published to use by other software developers. Similarly, one could envisage InDesign to do the same. Yes, it would lead to *huge* files -- but hey, you would be able to open THAT file into InDesign and edit it. But not with any other software!
The meta-problem is that an extremely large amount of this private data would be *extremely* dependant on the software that was used to create it with. What would an Illustrator file do with InDesign's GREP styles? What would InDesign do with Illlustrator's brush styles, or symbols? Illustrator allows slanted guides, InDesign does not.
And let's not focus purely on a combo of ID and Illy; Photoshop *also* outputs PDFs, and its graphic data has yet another set of requirements.
So all of Adobe's software would need to be able to parse *every others' data* to some degree. Well, it's still not "unconceivable" as all of this would need to be done in one office (note that in that single office there are still vast differences in something as straightforward as a User Interface across the CS suite). But there are lots of other software developers out there, and they *all* want to write out PDFs, all with their own internal data! (Think of the different requirements between an architectural app and one for graph plotting.)
A *possible* solution would be to add "more" metadata to a PDF without crossing into the realm of "every single bit". Article tagging is an example of this -- it tells software that wants to know in which order *plain text* is to appear, and as such it serves as meta-data for plain text content. But the mind reels thinking of what more to add -- a list of used GREP styles per paragraph would probably be useless to anyone else.
But such an idea will not solve the problem, as 1. this meta-data is optional (lazy programmers would be allowed to say "nothing to see here, move along"), and 2. this data would only get added to *newly created* files, and it would not retroactively make older PDFs editable ...
(Now that's just the *short* version :-) h

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

So I have updated my iphone4 GSM to ios 6.01, however after updating, my safari and mail could not work anymore, when i open these 2 apps, it just opens and hangs then it crashes.
anybody can help me ?

Opening and editing a PDF in INDESIGN

I am trying to edit a newsletter that was created by someone else using INDESIGN. It is now a PDF. I downloaded the free 30-day trial version of INDESIGN and cannot even open the PDF using said software. Can someone please offer any suggestions or ideas on how I can open and edit this PDF? Thanks.

No can do...
ID will Place a pdf, not edit it.
There is a plug in, PDF2ID, might be cost justifiable if you are going to do this occasionally (Really bad idea, really bad)
There is a widely known program which will open the pdf, widely frowned upon, strongly discouraged by all who represent Adobe...it is one of their flagship programs.
Save the pdf as a Word file, Place the Word file, rebuild that file from scratch, tedious. ..

Selecting disc using [File, Open] or [File, Save (as)] crashes application

I'm working in an application (doesn't matter which one, it's persistent in all apps) and choose [File, Open] (or [File, Save as].
Then I want to go to one of my HD's, so I want to select the HD.
But then all of a sudden, upon clicking for the desired HD in the upper left corner, the application quits, it doesn't even freeze, it simply quits...and I'm losing the non saved data I was working on..
This goes for only one specific HD in my setup. My Macintosh HD I can use without a problem.
Strangely enough when I work with the specific HD directly in the Finder there does not seems to be a problem, everything works fine.
I did " Repair disk" (no problem found) and "Repair permissions" (both from the Tiger DVD), but the problem still exists.
I created a new account, problem is exactly the same for the new account
I trashed com.apple.finder.plist and com.apple.sidebarlists.plist but no luck
I tried to watch in crash reports, but the crashes do not seem to get logged.
I hope anyone has a clue what's going on and how I can repair this? This is really annoying
G5 Mac OS X (10.4.5)

Anyone?

Why do I have to Open and physically Save a provided .xlsx File in order to source it and process it in SSIS?

It sounds CRAZY...but it's true and I proved it out over many tests...
We receive a .xlsx File from an outside vendor. If we simply move the file over to our processing Path and then try to source it and process it in SSIS, we get this error...
Exception from HRESULT: 0xC02020E8
Error at Data Flow Task [Excel Source [1]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB Error has occurred.
Error code: 0x80004005
However, if we open the file and Save It and/or Save As to our processing library path, we can source the .xlsx File and process it accordingly.
Why is this? Is it because something funky is happening under the covers when the the vendor creates and saves the .xlsx File and then when we open and save it on our network it then cleans it up?
Is there anyway that we can get around this? I hate for the processing clerk to have to go through what seems like a meaningless task....but I cannot think of any way around this if we cannot source the original file. And a C# Edit Script using Microsoft.Interpol.Excel
is not possible because we are not allowed to put Microsoft Office on the Server where the SSIS Package will eventually reside.
Any thoughts...suggestions...etc...would be GREATLY appreciated.
Thanks for your review and am very hopeful (Holding my breath) for a reply and possible solution and answer to this strangeness.
ITBobbyP85

First of all...THANK YOU ARTHUR!
You're probably sick and tired of seeing my posts out here on this.
We are running Microsoft Office 32-bit which is why I downloaded the 32-bit driver of Microsoft Access Database Engine 2010 from...
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Sooooo I think what you're saying is that it is a Microsoft Office 2010 .xlsx File but utilizing the 32-bit Microsoft Access Database Engine 2010 only allows me to source as Microsoft Excel 2007.
Nowwww....this will run on a Server...soooo a couple of questions...
1.) Are you saying I need to use the 64-bit Microsoft Access Database Engine 2010 in order to process this file without having to open and Save it? Can I do that if we're running Microsoft Office 32-bit? Will I be able to source this on the Server because
we cannot install Microsoft Office 2010 on the Server where this SSIS Package will live and breathe.
2.) How can I tell which Microsoft Access Database 2010 Engine is on the server where this will eventually reside and run? 32-bit or 64-bit?
Welllll...maybe a 3rd question...
3.) Is there anyway to get around this driver dependency? Can I create a script to bulkcopy it and it would simply take what's on the server.
Now mind you...we DO NOT have Microsoft Office installed on our server where this will reside...a licensing issue...
So maybe now this explains my struggles with this damn file(excuse my French and frustration)...and why I was using a C# Edit Script to Open and Save the File until I then deployed it to the server and the Microsoft.Office.Interop.Excel DLL was not available
on the Server because we cannot install Microsoft Office on the Server.
Sooooo it seems as though I'm back at square one.
UGH!
Any additional help you can suggest or even if we can continue this "offline" would be GREATLY GREATLY appreciated.
Thanks!

When I have more than one window open and close one firefox crashes

Closing any open window causes Firefox to crash.

Could be caused by Norton Confidential if you have crash report that involve coFFPlgn.dll.
If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the about:crashes page.
*You can open the about:crashes page via the location bar, like you open a website.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

Liquid Layout crashing InDesign CS6

I was using liquid layout - pinning a graphic- and when I tried to resize, the whole program crashed.   Every time I try to resize - on any page in the doc, it crashes the program.
InDesign CS6.   Liquid page rule: controlled by master [which is object based].   Objects move with page.
I've tried everything, for hours now.   I have no idea why it was fine, then all the sudden it's broken.
Very frustrated.

How would you go about exporting your alternate layout alone for print?

Q2ID crashes InDesign CS6

I just purchased Markzware Q2ID so that I can transition older Mac-based Quark documents into PC based InDesign CS6. I have success opening post 2009 Quark files through the Markzware menu in InDesign but not all Quark documents. Quark documents created prior to 2009 seem to be problematic. I know there may be font issues and maybe some older third party plugins that were resident in our Quark documents. It may also be a virtual memory issue in InDesign. Is there a way to increase the virtual memory for InDesign or have anyone else exxperienced similar issues with Markzware. I am not trashing Q2ID because the files it does open work great.
Any ideas?

I received a call from Markzware this morning and they found the solution to my issue. By turning off Preflight in the WIndow>Output>Preflight menu all the files that would not open before now open with no problems. Thank you Markzware and your great staff.

SmartStream crashes InDesign CS6

The SmartStream Designer plugin crashes InDesign every other time I use it. Here is the bug report:
Process:
Adobe InDesign CS6 [382]
Path:
/Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
Identifier:
com.adobe.InDesign
Version:
8.0.0.370 (8000)
Code Type:
X86 (Native)
Parent Process:
??? [1]
Responsible:
Adobe InDesign CS6 [382]
Date/Time:
2014-12-22 14:20:54.756 -0700
OS Version:
Mac OS X 10.10.1 (14B25)
Report Version:
11
Time Awake Since Boot: 470 seconds
Crashed Thread:
0 Dispatch queue: com.apple.main-thread
Exception Type:
EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:
KERN_INVALID_ADDRESS at 0x0000000000000003
VM Regions Near 0x3:
-->
__TEXT
0000000000001000-0000000000005000 [   16K] r-x/rwx SM=COW /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.applescript
0x10589e99 CreateStyleMapFromLegacyData(STElement**) + 99
1   com.apple.applescript
0x10589dce TASDialect::SetStyleMapObsolete(STElement**) + 24
2   com.apple.applescript
0x105866fd ASSetSourceStylesLocal(STElement**) + 32
3   com.apple.CoreServices.CarbonCore    0x97091983 callComponent_4 + 18
4   com.apple.CoreServices.CarbonCore    0x9707f062 CallComponentFunction + 42
5   com.apple.applescript
0x1057d1d6 AppleScriptComponent + 728
6   com.apple.CoreServices.CarbonCore    0x96fee848 CallComponent + 190
7   com.apple.CoreServices.CarbonCore    0x96fee89c CallComponentDispatch + 29
8   com.apple.openscripting
0x90fa39fc OSASetDefaultScriptingComponent + 43
9   com.apple.openscripting
0x90f9b4b3 OSADoIt(short, ComponentInstanceRecord*, FSRef const*, unsigned long, unsigned long, long, unsigned long*, AEDesc*, unsigned char*) + 2772
10 com.apple.openscripting
0x90f9bacf OSALoadFile + 79
11 com.adobe.InDesign.Support for AppleScript    0x17ad17cf 0x17ac5000 + 51151
12 com.adobe.InDesign.Support for AppleScript    0x17ad2fd4 0x17ac5000 + 57300
13 com.adobe.InDesign.Merger.sdk     0x1bcb085b YTDDMEUtils::RunAppleScriptGetMyDocumentsPath() + 939
14 com.adobe.InDesign.Merger.sdk     0x1bcb0b2b YTDDMEUtils::GetMyDocumentsPath(PMString, PMString) + 43
15 com.adobe.InDesign.Merger.sdk     0x1bcab216 YTDDMEUtils::GetSmartStreamUserDataPath(PMString, PMString) + 166
16 com.adobe.InDesign.Merger.sdk     0x1bcae4db YTDDMEUtils::GetImpositionUserPresetsFolderPath(PMString) + 171
17 com.adobe.InDesign.Imposition UI.sdk    0x1bfb4bb5 YTDImpUtils::getImpUserTemplatesPath(PMString&) + 133
18 com.adobe.InDesign.Imposition UI.sdk    0x1bf7c091 YTDImpGlobal::buildTemplatesVec() + 209
19 com.adobe.InDesign.Imposition UI.sdk    0x1bf7c97d YTDImpGlobal::initImpGlobal() + 269
20 com.adobe.InDesign.Imposition UI.sdk    0x1bf6ac05 YTImpositionDialogController::InitializeDialogFields(IActiveContext*) + 37
21 WidgetBinLib.dylib
0x00034b4d CDialogController::InitializeDialog(IActiveContext*) + 61
22 com.adobe.InDesign.Widgets
0x158a560d 0x1588e000 + 95757
23 com.adobe.InDesign.Widgets
0x158a4c4e 0x1588e000 + 93262
24 com.adobe.InDesign.Imposition UI.sdk    0x1bf68313 YTDImpActionComponent::DoImpositionDialog() + 387
25 com.adobe.InDesign.Actions
0x1a859bc4 GetPlugIn + 19908
26 com.adobe.InDesign.Actions
0x1a85e7b2 GetPlugIn + 39346
27 com.adobe.InDesign.AppFramework    0x11620614 0x11610000 + 67092
28 com.apple.HIToolbox
0x9401d5d4 _InvokeEventHandlerUPP(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*, long (*)(OpaqueEventHandlerCallRef*, OpaqueEventRef*, void*)) + 36
29 com.apple.HIToolbox
0x93e67501 DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) + 2291
30 com.apple.HIToolbox
0x93e664dc SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) + 402
31 com.apple.HIToolbox
0x93e79d25 SendEventToEventTarget + 88
32 com.adobe.InDesign.AppFramework    0x1161ee21 0x11610000 + 60961
33 com.adobe.InDesign.AppFramework    0x1163d327 GetPlugIn + 12007
34 com.adobe.InDesign
0x00001ec5 main + 341
35 com.adobe.InDesign
0x00001d55 start + 53
That is just the first chunk of text that seemed relevant to the crash. If more is needed I can easily recreate the scenario and get the whole report.
I initially tried using the latest release of Indesign CS6 (8.0.2) with the same results. I thought that going to a previous version would help. If anyone can make sense of the text above, it would be greatly appreciated.
Thanks,
Dan

Hi Danariotti,
My workmate and I are having the same problem here, with the same report you are getting with Indesign CS6.
This started with the upgrade to Yosemite, so we trialled the latest update to Smartstream with Adobe Indesign CC 2014 but this caused the programme to shutdown as soon as you start running indesign. I am hesitant to fully upgrade our Smartstream, as it is expensive for an unstable plug-in. The problem we are having is Adobe blame HP Smartstream and they blame Apple and back around again, we don't seem to get much support. Can you tell me if you get an answer to this please.
Cheers Tony

How can I download and register my copy of InDesign CS6?

I recently changed computers and have been looking to re-download InDesign CS6. I have my serial number, but I cannot find where to download if from. I tried the Creative Cloud app, but its not there either. I saw something mentioned about an application manager, but after I downloaded it, it just turned into the Creative Cloud app. Any suggestions?

InDesign CS6 can be downloaded thru the following page:
Download CS6 products
You might also find a link to download it thru your Adobe account online if you originally purchased a download thru Adobe.

Problems with "File Open" and "File Save As" in Tiger

I recently upgraded to OS10.4.3 on my PowerBook G4 and ever since I have had only frustration upon frustration with this new version.
When launching a program whether it be QuarkXpress 6.5, Illustrator CS, Photoshop CS, InDesign CS or Acrobat 6.0 and you go "File Open", it can take up to 3 minutes before the "Open" window dialog box will appear so that you can access your files. The same applies to the first "File Save As" in any of these programs. After that everything works normally.
Has anyone experienced this problem with Tiger and is there a solution? I should be most grateful for any assistance.
Leon
PowerBook G4 Mac OS X (10.4.3)

I got so frustrated with iDisk that I did indeed turn mine off altogether. Now I just mount it when I need it, and do whatever I want to do manually. And it is STILL annoyingly slow, not only in its own operations, but in the way it hijacks the Finder and can sometimes bring all Finder operations to a grinding halt.
I keep a local copy of the all the files I have on my iDisk in a perfectly normal folder. And I keep looking forward to the day when the promised seamless operation of my local files and iDisk will actually work.
I've been waiting for several years and thru several different incarnations of the OS, and it ain't there yet. I think Apple's version of WebDAV is just really really bad. I've heard other WebDAV servers work better. And I figured it was a bad sign when, back in Panther, one of Apple's own helpers recommended a third party WebDAV software (Goliath) to access the servers rather than using the Finder. I didn't think things could get any worse--until Tiger came along. A bad situation can get worse, and it did.
Maybe when Leopard gets here.....
Francine
Schwieder

Opening and relink a doc in Indesign

I am trying to take an Indesign document, as well as all of the elements linked to it, and drop it into a folder.(This part is already done)
Once it is in this folder, I want to open the file and relink the elements via a script with no user interaction.
I need the links to point to just a folder (i.e. \elementname.jpg) instead of a full path (i.e. C:\Files\elementname.jpg).
I am using VB scripting and CS4.
Currently, the only VB scripting I have done is to create a blank document that fits the size of the file.
Can anyone help or let me know if this is possible?

No can do...
ID will Place a pdf, not edit it.
There is a plug in, PDF2ID, might be cost justifiable if you are going to do this occasionally (Really bad idea, really bad)
There is a widely known program which will open the pdf, widely frowned upon, strongly discouraged by all who represent Adobe...it is one of their flagship programs.
Save the pdf as a Word file, Place the Word file, rebuild that file from scratch, tedious. ..

Download pdf = how to open and not save file

hi
in my app i have to download a file. at the beginning the file is called with blazeds as a ByteArray.
var saveReference:FileReference = new FileReference();
saveReference.save(pdfByteArray, 'Report.pdf');
i like to open an application associated on the Operation System when the user download the file. eg download the report.pdf => the pdf reader opens.
i tried hard but could not find a way to force this, in my app the save file dialog opens.
the only report similar to mine i could find:
http://stackoverflow.com/questions/569350/flex-filereference-download-is-it-possible-to-op en-associated-application/569596
maybe you could help me. thanks
joe

Don't think it's possible, due to security reasons (instantly being able to run a downloaded file spells out massive problems).
there is a topic here:
http://www.justskins.com/forums/download-file-open-pdf-from-flex-ui-87457.html
which seems similar to yours.
As they say in that topic though, you could just have a link that opens a new window to the PDF.

Idml open and idml Save As crash InDesign CS6 8.0.1

Similar Messages

Maybe you are looking for