Idoc 2 file problem

HI
MY TEST AND REMOTE LOGON FOR RFC IS PERFECTLY WORKING.
STILL IAM GETTING THIS PROBLEM IN SM58
EVEN THE PWD I VERIFIED
Password logon no longer possible - too many failed attempts
PLZ HELP ME

Hey bavesh
sorry
plz kindly solve my problem.
tnx

Similar Messages

Problem adapter idoc - file ATTRIBUTE_INV_SND_SERV

Hello All,
please help me for my problem on adapter in my system XI for a scenario idoc -> file an I have an message error.
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
<SAP:P1>BS_ADONIX</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to convert the sender service BS_ADONIX to an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please help if you have some idea BS_ADONIx is a business service.
Thanks for your reply

Steps IDOC to File.
IN IR
1. Import the IDOC in XI (input).
2. Create a Data type of (output) i.e. file.
3. Create a Message type of (output) i.e. file used the above data type.i.e.Step 2
4. Create a Message interface of(output) .i.e file used the above messagetype. i.e.Step3.
5. create Mappping select source as IDOC and target as Message type you created.
6, In Interface mapping select source as IDOC and Target Interface Message Interface of file i.e.Step 4.
In ID.
Select the recevier determination of .
1.select sender system as R/3 system recivr as File Bunisees system
2. create interface determination select sender system as R/3 Sender interface as IDOC . in interface determination select inbound message whihc createdin step 4
and message interface we created in step 5.
3. create recevier determination sender r/3 interface IDOC and reciver File business system . so create reciver file adapter and assign to file business system
Please reward points
Thanks
Sreeram.G.Reddy

Idoc to file problem.......... IDOC lost

i have a idoc to file problem,
the idoc is sent from R/3 to XI,
the problem is IDOC is sent from R/3,
it didnt reach to XI.....
i have checked.......we05 in R/3, it gives a status 3,
then i checked SM58 in R/3, it shows nothing,
when i check in idx5 in XI, theres no trace of that idoc....and no trace of the scenario run in SXMB_MONI
pls help, where can i trace the idoc.....
pls help

Hi sudeer,
Did You Check It In WE19.(Test Tool For Idoc Processing)
If Not Do The Following Steps:
Step1:
>> Give Your Existing Idoc Number.
Step 2:
>> Basic Type is Your Message type.
 Ex: MATMAS05 or CREMAS05.
Step 3:
>> In Your Existing MATMAS05 or CREMAS05 Structure say EDIDC,
>> You Should Fill Your Mapped Entries In Data Structure of EDIDC.
>> So that Those Fields Gets Framed as Segments.
Step 4:
>> After Doing It goto Menu Bar and Click Idoc And Goto Edit Control Record.
Step 5:
>> Now You Give Your Sender And Receiver Port Number Along With Your
 Logical System And Message Type again its Your MATMAS05 or
 CREMAS05 .
Step 6:
>> After Doing It Click Standard Outbound Processing.
Step 7:
>> It Will Say what Happened To your Idoc.
Step 8:
>> It Is For Sure That if This Processing Fails It Wont Go To XI..
Regards,
Dhayanandh .S
Dont forget To Provide Points If Found Helpful...
Message was edited by:
 DHAYANANDH SIVASANKARAN

HR-PDC interface: Problems in the file name of the downloaded idoc file

I'm currently busy with the HR-PDC interface to EBI-time recording system. The RFC destination to EBI's quality system is working fine but we are experiencing differences in the idoc file name that we are creating in the EBI path. When we send a request to EBI to upload clocks, an idoc (Message Type: HRCC1REQUPTEVEN and IDOC type: HRCC1REQUPTEVEN01 ) is sent to EBI The file name is HRCC1REQUPTEVEN whereas in a previous implementation file name is HRCC1REQUPTEVEN01. The control record information on the outbound idoc are the similiar in terms message types and idoc types sent through to EBI. Have you ever come across this issue in your previous experiences with SASOL's HR-PDC interface. SAP has not changed the IDOC type HRCC1REQUPTEVEN01 since 1998.

can you please also contact IDM support about it?
* http://www.internetdownloadmanager.com/register/new_faq/main.cgi

Problem in SOAP to IDOC & File scenario

Hi,
My scenario is SOAP ->IDOC and FILE,when I run the scenario IDOc was processed and File was not created at the target system.I maintained LS name for sender SOAP and IDOC business service.Nothing was maintained in adapter spec identifiers for Recer business service(i.e For target File CC).This was working fine in Dev.After Importing another scenario which uses same business service,this didnt stp working?
what could be the reason?
Thanks,
RP
Edited by: RP@261 on Oct 21, 2008 10:59 PM

> my imported scenario and existing scenario in QA using same sender business service.After importing the other scenario,existing scenario is failed to create files at target system even though it shows successful in MONI.
>
Check the target dir permission once again from your BASIS team. Reconfirm the the target dir name in receiver CC also.
> Should we maintain Logical system in adapter specific identifiers for Recr File CC also??? I create a file in BI application server from recr File CC.
>
No, for creating a file you don't require this. This is required only in case of IDOC.
> my scenario is
> (SOAP sender) --> TO IDOC & FILE ..i maintained LS name in sender BS where SOAP CC is created and also at Recr BS where IDoc CC is created. The other Recr BS for File where I didn't.IS it required ?
>
For File recever BS, No need.

IDoc - File Scenario

Dear SDN,
We have to develop something like this:
An IDoc is generated from an ABAP Business System. Using content based routing conditions the IDoc must be sent to different FTP servers. The problem is that the IDoc must be written in its "native plain" format, not in XML format.
Any ideas?

hi Gustavo,
2 ways
1. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
2. send the idoc from R3 in native IDOC (file port) and just tranport it via XI
both ways will produce native IDOC:)
for file ports you can check out my book
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Transfer IDOC File in a Internal Table

Hi all,
I need to Transfer IDOC File in a Internal Table.
Anybody have any idea how can I do this???
Regards,

HI,
is the IDoc exist in SAP?if IDoc exist in SAP you can use one function module to read the idoc and store tha content in internal table.
IDOC_READ_COMPLETELY function module will read the specified idoc number.you can retrieve the control records ,status records and the data record of the idoc.for this you have to declare 3 internal tables (check the function modules for the type of inerna table).you can then loop the internal table and read the data.let us know if u have any problems
regards
shibu

Multi mapping.. is it possible File to Idoc & FIle .. its urgent?????

Hi All,
File to Idoc & File.
I need to pick the file and i need to do multi mapping, so that from the file we can generate
one idoc which has to go to SAP and
one acknowledgment's file and sent back to partner.
Based on the below blog, looks like we can't use Idoc adapter when the target message is Idoc using Multi mapping.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Can anyone suggest me how i can achieve this scenario without using BPM.??
Regards
Seema.

Hi,
The Multi mapping is possible without BPM but not for IDOC as its not part of Java Stack. IDOC adapter is on ABAP stack.
As Raj have suggested,
You could create two different Mappings one for file to IDOC and another for file to file as an acknowledgment.
In Receiver determination you need to use multiple receivers as IDOC --R/3 receiver and the File receiver system.
It will create the IDOC as well as push the acknowledgment to file also.
But incase if you get any problem with sending the IDOC then also you will get successful acknowledgment via file. So directly there will not be any relation between these IDOC and File receivers as an delivery recipt of IDOC.
Here either you have to use the IDOC acknowledgment feature or BPM or Alert notification to get the exact notification about the IDOC posting to receiver system.
Please refer below links
1. IDOC acknowledgment
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This Feature is Available under SP 18 and we are on SP16
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
Check this document on handling IDOC acknowledgements. This might give you some pointers.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
How to Handle Acknowledgments for IDoc (NW7.0)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
IDOC acknowledgements
2. BPM
File to IDOC with BPM
File to idoc with BPM
Problem in BPM implementation
Use Aleaud in BPM
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
3. Alert Notification
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
Thanks
Swarup

Configuring a multiple IDOC-File using BPM

HI,
My scenario involves 2different idocs which are to be mapped to a file structure,the steps that i have followed in IR is ,
1.Create target MesageType
message Interfaces.
2.Create 2 Abs interfaces based on IDOC
3.Create 1 Abs for o/p of BPM.
4.Create 1 Inb for target.
Message mapping.
5.Two dummy mappings for outbound idocs to abstract idocs.
6.One multimapping(two idocs-->File)
7.One Dummy mapping for Abstract Intf(output of BPM) to target Filestructure(inbound).
Interface Mapping.
8.Two Mesage intf for changing Outbound idocs to Abstract using the dummy mapping programs)
9.One Message Intf using 2 abs Idocs to One Abs File(using the multimapping pgm)
10.one msg Intf for BPM Out --> Inb File (using the dummy mapping pgm)
Integration Process.
I have used a fork step under which there are 2 recieve steps to recieve the IDOCS and then a Transformation step that would multi-map the idocs to the file,then a send step.
Please let me know if the approach is right.
Also Could anybody please let me know what steps do i need to take in the Configuration part and should i use the wizard or should i do it manually.
the problem using the wizard is it doesnt let me choose 2 Message interfaces for the sender ie; IDOCS,
Please help me on this.Thank you waiting for a reply....)

John,
5.Two dummy mappings for outbound idocs to abstract idocs.
7.One Dummy mapping for Abstract Intf(output of BPM) to target Filestructure(inbound).
These dummy mappings are needed. As both the Abstract Message Interfaces and the Idoc / Inbound interface will use the same message type, no dummy mapping needed. In the interface determination for these, no interface mapping needs to be mnetioned.
ID.
Receiver Determaintions
1. Sender Service -- IDOC1 and Reciver Service is -- BPM. Sender Interface will be IDOC1 and Receiver Interafce will be The IDOC abs interface . No Interface mapping.
2. Sender Service --- IDOC2 and Receiver Service is -- BPM. Sender Interface will be IDOC2 and Receiver Interafce will be The IDOC abs interface . No Interface mapping.
3. Sender Service is BPM , and receiver servcice is File. Sender Interface is File Abs interface and reciver interface is the Inbound File interface.
1 Reciver Agreement for the File adapter.
Regards,
Bhavesh

IDOC file format supported ? but how?

hi all,
i am trying to achieve to read an idoc file with soa suit. but i can not find how to handle this data structure.
can anyone give me a hint to documentation where this is described?
regards chris

hi manoj,
in our environment we are used to changing IDOC structures one a almost daily basis.
iway has two crucial problems for us:
1) it is not possible to receive generic idocs as IDOC_INBOUND_ASYNCHRONOUS s SAP designed it supports. idocs that are received by iway therefore always must be typed and "well known" by the receiver. so iway is not idoc agnostic and is not able to update its idoc structures without rebooting to get the format "well known". as far as we understand it. for us having to reboot a SOA system on a almost daily basis that should be 99.999 % available is not an option. at least for us.
2) iway is very lets say work intensive for configuration/administration if you have to deal with let's say 30 -100 SAP systems.
therefore we think about not using iway at all but doing everything by file (IDOC format EDI) and hope to at least get rid of point 2. if we get rid of point 1 is still open to the implemenation of the third party library.
regards chris

Issue in IDOC-File Scenario

Hallo Everybody,
In one of the requirements,for the interface design which involves IDOC-FILE scenario we have a req as:-
Multiple IDOCs would be sent from SAP R/3 to SAP XI. Each IDOC can have 0-4 segments and for each segment a file needs to created.
The files needs to be FTPed to a location, only if all the IDOCs have been processed successfully.
Requirement:
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
2) We need to send a notification from XI, in case any IDOC processing fails.
3) How do we check in XI, if all the IDOCs have been processed successfully.
Please suggest me with some good stategies to resolve this issue.
Appreciations and Rewards in line.
Regards,
Younus

Hi
Are you planning to use BPM as it suits your requirement.
To collect the idocs in small bunches refer
Collecting IDocs without using BPM
1) Even if a single IDOC fails,the files should not be FTPed. --> How do we handle this in XI.
BPM will allow you to wait for the time all IDOC are processed
2) We need to send a notification from XI, in case any IDOC processing fails.
BPM exception handling will allow this functionality even to the exact field you want to send notification
3) How do we check in XI, if all the IDOCs have been processed successfully.
Set Acknowledgment for IDOC's
refer
Posting multiple IDocs with Acknowledgement
Thanks
Gaurav

XML IDoc file to IDOC .

Hi,
I am receiving XML idoc (Orders05) file from 3rd party to PI system , PI needs to create sales order IDoc ( Orders05) in ECC system.
1) Do I need to create source structure for XML IDoc file ? If yes should I create the structure as Orders05 ?
2) How to map line items of xml file to Orders05 IDoc line items ?
Please help.
Thanks - Vinay.

Hi Vinay,
Please see Mikes reply in this thread. You may follow the same procedure:
XML to FlatFile IDOC
Regards,
---Satish

DW CS5 Missing Related Files Problem

Hello
Hoping somebody may be able to help me with a missing related files problem in CS5. I've tried Adobe phone support but they couldn't solve the problem.
*Some* of my sites (but not all) are not showing all the files related to that page. My pages are typically in .asp vb server model and contain .asp virtual includes (header, nav etc) plus .js and .css linked files
However DW is only showing the .asp includes as related files and not css or js ones. In design view the CSS is displaying correctly, and all styles appear in the CSS inspector but not showing as a related file in the bar. In CS4 it works fine.
I've tried deleting the site and recreating it, copying the files to a new folder and setting up a fresh site, creating a new folder and downloading all files from the remote server but no joy. I've also tried refreshing related files. if I click on the filter in the bar it only shows the asp includes and nothing else.
Any help would be gratefully appreciated, this is a great feature when it works
Cheers
MB

UPDATE:
Managed to solve this problem, this is a new issue to DW CS5, previous versions do not seem to exhibit this problem
It occurs when you use site root rather than document relative paths for js/css etc files AND don't have the remote site url (web url) specified in the site setup | local info dialog, or do not have it fully qualified with http://
ie. ../js/file.js works fine without a remote web url but /js/file.js does not show the related file in the bar unless a remote url is defined.
Hope that helps anyone else that encounters the same issue!
MB

With conversion to Leopard, file problems with networked Windows computer

Last night I did an Archive & Install from Tiger to Leopard on my Intel MacBook Pro. Today, I had trouble finding the other computers at my office. Once I finally got them to show up, I opened a Word file found on another computer, made some changes, and when I tried to save it, I got this message: "This is not a valid file name. Try one or more of the following: *Check the path to make sure it was typed correctly. *Select a file from the list of files and folders." Since this file already existed and I wasn't changing the name, I thought this was odd, but I changed the name from "Seating Chart 3-8-08" to "SeatingChart3-8-08" in case Leopard didn't like spaces when talking to Windows, but I got the same error message. Finally I gave up, not knowing what to do, then discovered that it had in fact saved my file. Still, every time I try to save ANY Word document from the shared folder of the Windows computer, I get the same error message endlessly until I choose "Don't Save."
When I try to open an Excel file from that computer, it won't even open; it says " 'File Name.xls' cannot be accessed. This file may be Read-Only, or you may be trying to access a Read-Only location. Or, the server the document is stored on may not be responding." As with the Word file problem above, I did not have any problem accessing the files until I converted to Leopard.
The Windows machine is Windows XP using Microsoft Office 2003; I have Microsoft Office 2004 on my machine.

See if this Link, by Pondini, offers any insight to your issue...
Transfer from Old to New
http://pondini.org/OSX/Setup.html
Also, See here if you haven't already...
http://www.apple.com/support/switch101/ Switching from PC

Append or combine multiple IDOCs into a single IDOC file

Hi All,
We are implementing multiple new payment types that will generate IDOC files for us to send to the bank. To keep the cost to the minimum, the requirement is to combine multiple IDOCs to a single file.
I'd like to know the most efficient way to complete this task. Also, I am new to this forum, please let me know if I need to include additional information.
Your help will be deeply appreciated.
Thank you,
Joanne T.

Hi Milind,
One way you can do this is generate each report in PDF or Postscript, and then use Adobe Acrobat Distiller to combine the files into one PDF document.
Regards,
Stewart

NO MATERIALs in the Sales order created through inbound idoc file

hi,
i have maintained the customer material number as well the SAP Material number in the tcode VD51,but still the inbound
idoc type ORDERS03 is posting the application document(Sales order) without the materials.
for instance,
I have cust.material as CUSTMAT1 in the idoc file.
I have maintained the CUSTMAT1 as cust material and 1001 as material no in VD51.
After posting the inbound idoc file using RSEINB00 prg,the idoc is created and i can see the CUSTMAT1 in the material segment field
The Sales order is created successfully ,but without the materials.
i need the application document has to be posted with materialsm,can any one help me to solve this issue.?
Thanks

Hi ganesh ram
In order to determine the Material Number with you custom material then you needs to have some configurations.
Check with your Functional consultant to add the Access sequence for determining the Material Number with you custom material
In Sale order processes...
Thanks
Ramesh

Idoc 2 file problem

Similar Messages

Maybe you are looking for