IDOC Ack from BPM to SAP R3 runs into an error
Hi All,
I have a scenario which sends an DEBMAS IDOC to an Integration Process "IP_SPLIT_Site" which process the IDOC and sends it to multiple systems.
When the IDOC is sent from SAP R3 to the receiving Integration Process "IP_SPLIT_Site" in XI, it is processed successfully.
Since the SAP system is expecting an acknowledgement from the receiver of the IDOC, the integration process "IP_SPLIT_Site" tries to send back an acknowledgement for the IDOC which runs into an error because it is not able to convert "IP_SPLIT_Site" into an ALE logical system.
The error displayed is :
Unable to convert the sender service IP_SPLIT_Site to an ALE logical system
Error code : ATTRIBUTE_INV_SND_SERV
I am getting this error in all my scenarios where an IDOC is sent to an Integration Process.
Is there any solution avoid this error?
Thanks & Regards;
Bbnu
Hi Michal
The 1st approach seems to be helpful.
about the 2nd approach if i am sending the Ack through a separate send step in BPM then i suppose it would show the same error "Unable to convert the sender service IP_SPLIT_Site to an ALE logical system".
OR
Do you mean to say that we could send a separate message of type ALEAUD to the SAP system?
for 3rd approach, i wouldn't wanna handle many partner profiles.
Thanks for your reply,
Rgds;
Bbnu
Similar Messages
-
Hi -
So I've an legal Office 2013 version running on my Surface Pro 2, which works fine.
I installed lync client 2013 (not from the appstore, but the desktop version) and on first sight, seems to work as well.
Now comes the issue - when I want to join a meeting, the following error comes up:
"we're sorry, but lync has run into an error that is preventing it from working''
I already re-installed Office and Lync several times - but the error keeps coming and it getting really frustrated because I cannot join any meeting.
TimHi,
Please check if the Lync conference add-in is active in Outlook.
You can check with the following steps:
Click File button on Outlook, Options--Add-Ins. Make sure the Lync Add-in for Microsoft Office 2013 in the list of "Active Application Add-ins". If it is in Inactive Application Add-ins or Disabled Application Add-ins, active it and then restart
Lync client and Outlook to test the issue.
If the issue persists, please also delete Lync user profile and Outlook profile to test the issue.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support -
Today we had this error code on starting Office programs out of the blue. We've had this error in the past and we know what caused it, but that action wasn't taken. I've already read other posts, but no "Answer" provides a real solution to a clear
problem with Office 365.
The error: "We're sorry, but (program name) has run into an error that is preventing it from working correctly. (Program name) will need to be closed as a result."
It offers "Repair Now", then the two following options: "Online" or "Offline". Neither are effective.
In the past we used the Office 365 Fix It tool, but uninstalling and reinstalling Office on a regular basis is unacceptable. Resorting to web apps is also not going to happen.
Running Win 7 Pro 64 bit, fully updated.
We're starting to get fed up with this broken software. Paying monthly for programs that don't work is ridiculous. Any real answers would be greatly appreciated!Locate your Office application and check the setting of Compatibility.
For example,
Right click on Excel (.exe) > Properties > Compatibility > uncheck all the boxes, click Ok and check if it helps.
To access Excel (.exe), open the following location:
C:\Program Files\Microsoft Office\Office15\Excel.exe
Or
C:\Program Files\Microsoft Office 15\Root\Office15\Excel.exe
Try to open Excel and check if it opens.
http://social.technet.microsoft.com/Forums/en-US/590617de-629f-413b-8c11-f3cc79e27e7a/excel-2013-error-on-open-were-sorry-but-excel-has-run-into-an-error-that-is-preventing-it-from?forum=officeitpro
Thanks.
Tony Chen
TechNet Community Support -
Microsoft Office Home Premium: Office has run into an error....
I recently upgraded from Office 2007 to Office 365 Home Premium which includes Outlook 2013.
When I click on Open iCloud Control Panel I first get the iCloud Control Panel.
Then I get a window from Outlook: We're sorry, but Mirocsoft Office has run into an error that is preventing it from working correctly.
Microsoft Office will need to be closed as a result.
Would you like us to repair now?
Any ideas?No problem.
I uninstalled Office 365 and installed Office 2010.
Then uninstalled iCloud, downloaded it fresh and reinstalled.
All working fine now.
Might be nice to put a little stronger message in the Control Center.
When I installed Office 365 I believe I saw a message in iCC that said something like
'there are two Outlooks on the system. iCloud will only work with one'.
Then it wanted me to do the setup for iCloud. iCloud didn't seem to balk at setting up into 2013.
But I'm guessing it really didn't install properly.
I appreciate that quick post about Outlook 2013 and iCloud support.
That saved me a lot of time.
Office 365 loses the Windows Search facility. That comes back by regressing
to 2010. I use that a lot. I missed it the short time I was on 2013.
Off topic, but can Yahoo mail go through iCloud? That might be something
I could use. -
How do i set up my debit account information? so i can make purchases on the appstore. I keep running into errors and all my information is correct. I have read a bunch of forums saying that this is a giant problem and that i need tech support ot set up my charging information.
Hi...
Try here > iTunes Store: My credit card's security code or zip code does not match my bank's records
Billing policy is the same for both the Mac App and iTunes Stores. -
I'm trying to update a Macbook Pro with 10.6.3. The latest using Software Update does not complete downloading. After 475 Mb an error message says it can't connect to the update server. I tried incrementally updating to 10.6.4. It downloads, starts to install, and just before finshing the install gives a "software error" message and quits. Is this a known issue, and how can I get around it?
Try running the combo updater.
10.6.8 Combo Updater -
Calling a stored procedure runs into an error
Hello,
We are testing the Database Adapter.
In our database we created the following
- Table tt
- Package ttpackage, with a procedure with 1 input and 1 output parameter which inserts a record in the tt table.
(see scripts at bottom of message)
We created a Database Adapter based upon this Package (Call a stored procedure or function) and register this Database Adapter with the Integration Server.
When we invoke this Database Adapter and enter the input, we can see in the database that 4 records are created. The Web Service returns after a minute with an error
How can we solve this problem?
Regards Leon Smiers
ERROR
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
at java.util.Vector.get(Vector.java:710)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.readResponseHeader(Unknown Source)
SCRIPT
drop table tt
drop sequence seq_tt;
drop package ttpackage;
create table tt
(field1 number(10) not null
,field2 varchar2(25) not null
,status varchar2(1) not null
,primary key (field1)
create sequence seq_tt;
create or replace package ttpackage is
procedure insert_tt(
pi_field2 in tt.field2%type,
po_status out klacht_data.status%type);
end;
show errors
create or replace package body ttpackage is
procedure insert_tt(
pi_field2 in tt.field2%type,
po_status out klacht_data.status%type) is
begin
po_status:='I';
insert into tt
(field1, field2,status)
values(seq_tt.nextval,pi_field2,po_status);
end insert_tt;
end;
show errors
/Hello Dave,
Thanks for the quick fix.
I've tested the fix. The 'Array index out of range: 0' disappeared.
I get, unfortunately, the following error. I already described the steps I take in the first message. Based upon the TTpackage I create a Database adapter, register it with the ESB and invoke the URL from the ESB.
Regards Leon
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.xml.parser.v2.XMLDOMException: Ongeldige naamruimte http://xmlns.oracle.com/pcbpel/adapter/db/OCOP/TTPACKAGE/INSERT_TT/ voor prefix xmlns
at oracle.xml.parser.v2.XMLElement.setAttributeNS(XMLElement.java:1015)
at oracle.tip.esb.utils.DOMUtil.copyContentsTo(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(Unknown Source)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(Unknown Source)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:869)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:460)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope> -
Creating internet cafe PKGBUILD & running into an error @ execution...
Pretty sure my PKGBUILD is solid and intend on putting it in AUR tonight for others to test.
The program is Cafe Pilot. The PKGBUILD is for the server, with the client coming later (tomorrow, likely). The error I get upon execution is as follows:
Exception in thread "Timer-0" java.lang.NoClassDefFoundError: Could not initialize class com.dijitanix.cafepilot.cafepilotserver.mg
at com.dijitanix.cafepilot.cafepilotserver.ug.e(Unknown Source)
at com.dijitanix.cafepilot.cafepilotserver.mh.run(Unknown Source)
Exception in thread "main" java.lang.NoClassDefFoundError: org/c/b/g$_j
at com.dijitanix.cafepilot.cafepilotserver.mg.<clinit>(Unknown Source)
at com.dijitanix.cafepilot.cafepilotserver.Main.main(Unknown Source)
Caused by: java.lang.ClassNotFoundException: org.c.b.g$_j
at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
at java.lang.ClassLoader.loadClass(ClassLoader.java:321)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
at java.lang.ClassLoader.loadClass(ClassLoader.java:266)
... 2 more
I'm not well-versed in java at all! So I am clueless to what this is telling me outside of possibly that it can't find the offsite servers that it is trying to reach... Any and all help would be great. I built this with openjdk6 as a dep, not sure if I need real java or not (or if I can move to v.7 of openjdk). Any input/insight would be seriously helpful and greatly appreciated. Thanks in advance to everyone!Hi Puthanampatti,
In that ase what would be my sendForward() mthod look like.
Currently as per the Dev guide it is :
private void sendForward(String forwardUrl) {
FacesContext ctx = FacesContext.getCurrentInstance();
try {
ctx.getExternalContext().redirect(forwardUrl);
} catch (IOException ie) {
reportUnexpectedLoginError("IOException", ie);
ctx.responseComplete();
I understand tat there would be change in parameters like sendForward(HttpServletRequest request,HttpServletResponse response,String forwardUrl),
but how would the other parameters work.
Regards,
Nikhil Misra -
Running into strange errors when creating a new instance
Hello:
I am running 9.2.0.8 on a Windows 2003 Server.
When I try to create a new instance, I chose a New Database/UTF-8/16KB Block Size. Everything else was default value. However, I get a "ORA-29807: specified operator does not exist" error. When I looked into the Create log file, the file, CreateDBCatalog.log has the following errors:
No errors.
No errors.
drop table AUDIT_ACTIONS
ERROR at line 1:
ORA-00942: table or view does not exist
No errors.
CREATE ROLE exp_full_database
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
CREATE ROLE imp_full_database
ERROR at line 1:
ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
drop table system.logstdby$skip_support
ERROR at line 1:
ORA-00942: table or view does not exist
Warning: View created with compilation errors.
Warning: View created with compilation errors.
CREATE ROLE exp_full_database
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
CREATE ROLE imp_full_database
ERROR at line 1:
ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
drop synonym DBA_LOCKS
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
drop view DBA_LOCKS
ERROR at line 1:
ORA-00942: table or view does not exist
No errors.
drop package body sys.diana
ERROR at line 1:
ORA-04043: object DIANA does not exist
drop package sys.diana
ERROR at line 1:
ORA-04043: object DIANA does not exist
drop table sys.pstubtbl
ERROR at line 1:
ORA-00942: table or view does not exist
drop package body sys.diutil
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
drop package sys.diutil
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
drop procedure sys.pstubt
ERROR at line 1:
ORA-04043: object PSTUBT does not exist
drop procedure sys.pstub
ERROR at line 1:
ORA-04043: object PSTUB does not exist
drop procedure sys.subptxt2
ERROR at line 1:
ORA-04043: object SUBPTXT2 does not exist
drop procedure sys.subptxt
ERROR at line 1:
ORA-04043: object SUBPTXT does not exist
No errors.
No errors.
No errors.
No errors.
drop type dbms_xplan_type_table
ERROR at line 1:
ORA-04043: object DBMS_XPLAN_TYPE_TABLE does not exist
drop type dbms_xplan_type
ERROR at line 1:
ORA-04043: object DBMS_XPLAN_TYPE does not exist
No errors.
DROP TABLE ODCI_SECOBJ$
ERROR at line 1:
ORA-00942: table or view does not exist
DROP TABLE ODCI_WARNINGS$
ERROR at line 1:
ORA-00942: table or view does not exist
No errors.
No errors.
No errors.
No errors.
drop sequence dbms_lock_id
ERROR at line 1:
ORA-02289: sequence does not exist
drop table dbms_alert_info
ERROR at line 1:
ORA-00942: table or view does not exist
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
drop table SYSTEM.AQ$_Internet_Agent_Privs
ERROR at line 1:
ORA-00942: table or view does not exist
drop table SYSTEM.AQ$_Internet_Agents
ERROR at line 1:
ORA-00942: table or view does not exist
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
DROP SYNONYM def$_tran
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
DROP SYNONYM def$_call
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
DROP SYNONYM def$_defaultdest
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
DBMS_DEBUG successfully loaded.
PBUTL successfully loaded.
PBRPH successfully loaded.
PBSDE successfully loaded.
PBREAK successfully loaded.
DROP TYPE SYS.RewriteMessage FORCE
ERROR at line 1:
ORA-04043: object REWRITEMESSAGE does not exist
DROP TYPE SYS.RewriteArrayType FORCE
ERROR at line 1:
ORA-04043: object REWRITEARRAYTYPE does not exist
DROP TYPE SYS.ExplainMVMessage FORCE
ERROR at line 1:
ORA-04043: object EXPLAINMVMESSAGE does not exist
DROP TYPE SYS.ExplainMVArrayType FORCE
ERROR at line 1:
ORA-04043: object EXPLAINMVARRAYTYPE does not exist
No errors.
drop view sys.transport_set_violations
ERROR at line 1:
ORA-00942: table or view does not exist
drop table sys.transts_error$
ERROR at line 1:
ORA-00942: table or view does not exist
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
drop operator XMLSequence
ERROR at line 1:
ORA-29807: specified operator does not exist
What does this mean?
venki
Edited by: thevenkat on Mar 11, 2009 10:17 PMVenki,
The ORA-00942 is okay because there is no existing object. But what stuck me is the ORA-01921 error which may indicate that this might not be a new database.
CREATE ROLE exp_full_database
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role name
CREATE ROLE imp_full_database
ERROR at line 1:
ORA-01921: role name 'IMP_FULL_DATABASE' conflicts with another user or role name
Are there any existing databases on this server? Have you tried to create it on other machine?I searched on Metalink too and found Doc ID: 237486.1 ORA-29807 Signalled While Creating Database using DBCA which say that eroror could be ignored. You may want to review that as well.
Ittichai -
Trying to install Vmware Player on OEL and running into an error
All
I need to run a preconfigured Vmware VM on one of ours Enterprise Linux servers. I've already installed VMware-Player-3.13.*.bundle on the machine, no error message, but now when I try to run vmplayer I am getting the following message :
before you can run vmware, several modules must be compiled and loaded into the running kernel:
kernel headers 2.6.9-89.0.0.0.1ELxenU
kernel headers for version 2.6.9-89.0.0.0.1ELxenU were not found...
Any help would be appreciated.
Thanks and regards
AnilThanks Avi for the pointer.
I did a 'sudo -su ' and ran 'rpm -ivh kernel-xenU-devel-2.6.9-89.0.0.0.1.EL.i686.rpm' and it went through successfully.
But then when I launched VMPlayer, a popup came up saying " Before you run VMWare, several modules must be compiled and loaded into the running kernel.". I clicked on 'Install' to continue.
Another popup came up saying "Failed to run /usr/bin/vmware-gksu '/usr/bin/vmware-modconfig' --icon='vmware-player' --appname='VMware' --gcc='/usr/bin/gcc' --headers='/lib/modules/2.6.9-89.0.0.0.1.ELxenU/build/include' --gcc-ignore-minor as user root. Failed to exec new process. No such file or directory."
And then I had to exit.
This is the log contents when VMPlayer was run :
Dec 01 18:27:11.567: app-3086636736| Log for VMware Workstation pid=11013 version=7.1.3 build=build-324285 option=Release
Dec 01 18:27:11.567: app-3086636736| The process is 32-bit.
Dec 01 18:27:11.567: app-3086636736| Host codepage=UTF-8 encoding=UTF-8
Dec 01 18:27:11.567: app-3086636736| Logging to /tmp/vmware-vmotamar/setup-11013.log
Dec 01 18:27:11.944: app-3086636736| modconf query interface initialized
Dec 01 18:27:11.945: app-3086636736| modconf library initialized
Dec 01 18:27:11.979: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:11.989: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.011: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.036: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.058: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.104: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.108: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.113: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.117: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.121: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.146: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.150: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.154: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.158: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.162: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.168: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.184: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:19.720: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.725: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.729: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.733: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.738: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.745: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:19.764: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:19.807: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.812: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.817: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.822: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.827: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.827: app-3086636736| Relaunching with /usr/bin/vmware-gksu '/usr/bin/vmware-modconfig' icon='vmware-player' appname='VMware' gcc='/usr/bin/gcc' headers='/lib/modules/2.6.9-89.0.0.0.1.ELxenU/build/include' --gcc-ignore-minor
Could you please suggest? -
Hi,
after starting my MacBook Pro I was faced with a grey screen stating that "an error has occurred, you need to restart your computer". I did that multiple times but the same message appeared each time. So I started the Safe Boot. Now the progress bar is stuck at the 25-30% progress mark since 30 min. Any advise on what to do from here?
Any help and advise is much appreciated!I doubt that shutting it off will do any harm but don't do it too often.
Here is the best advice I can find for you:
http://reviews.cnet.com/8301-13727_7-57573680-263/what-to-do-when-a-mac-wont-boo t-to-safe-mode/ -
Trying to download the CS^ Master Suite but run into an error when I download it
this the error message I get when I hit the download button
how do I fix it. I want to evaluate some programs before I decide to buy themDirect Download Links for Adobe Software
Mylenium -
SAP CE 7.1.1 Error
Hello all,
I am getting a repeated log in my Log Viewer with the below messages:
1)
Message: Logical Port <100.SystemName.ECC.SystemNumber.0020194035.SystemHome.HYDSAPUPG001> for Proxy Definition <sap.com/tcesiespwsil_sap.comtcesiespwsilweb_WEB/inspection.wsil/Service_SRT_WSP_MASS_CONFIG_WS_TEST_ML_default_SRT_WSP_MASS_CONFIG_API>
[EXCEPTION]
com.sap.esi.esp.lib.mm.config.exceptions.ObjectNotExistsException: Logical Port <100.SystemName.ECC.SystemNumber.0020194035.SystemHome.HYDSAPUPG001> for Proxy Definition <sap.com/tcesiespwsil_sap.comtcesiespwsilweb_WEB/inspection.wsil/Service_SRT_WSP_MASS_CONFIG_WS_TEST_ML_default_SRT_WSP_MASS_CONFIG_API>
at com.sap.esi.esp.service.server.ESPServiceInterfaceImpl.getLogicalPortAuthType(ESPServiceInterfaceImpl.java:953)
at com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler.createABAPEndpoints(ConfigurationScenarioHandler.java:287)
at com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler.updatePorts(ConfigurationScenarioHandler.java:233)
at com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler.processConsumerAssignments(ConfigurationScenarioHandler.java:629)
at com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler.processAllScenarios(ConfigurationScenarioHandler.java:129)
at com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler.process(ConfigurationScenarioHandler.java:114)
at com.sap.esi.esp.service.server.SOATimeoutListenerImpl.process(SOATimeoutListenerImpl.java:353)
at com.sap.esi.esp.service.server.SOATimeoutListenerImpl.run(SOATimeoutListenerImpl.java:190)
at com.sap.esi.esp.service.server.SOATimeoutListenerImpl.timeout(SOATimeoutListenerImpl.java:103)
at com.sap.esi.esp.service.server.SOATimeoutListenerImpl.timeout(SOATimeoutListenerImpl.java:84)
at com.sap.engine.services.timeout.TimeoutNode.run(TimeoutNode.java:71)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:162)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:260)
Date: 2009-03-03
Time: 17:56:50:166
Category: com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler
Location: com.sap.esi.esp.service.server.mass.ConfigurationScenarioHandler
Application:
Thread: Timeout Event Processor [8]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Arguments:
DSR Transaction: a69682d0070b11dea31f000e0c602248
Message Code:
Session:
Transaction:
User:
TimeZone: +0530
CSN Component: BC-ESI-WS-JAV
DC Component: tcesiesp~srv
Correlation ID: 6582850000175331
DSR Root Context ID: A69682D0070B11DEA31F000E0C602248
DSR Connection: a69682d0070b11dea31f000e0c602248
DSR Counter: 0
Host: blrkecsaptst2
System: CE2
Instance: J00
Node: server0
Log ID: 000E0C60224800380000004400000D88
2)
Message: Processing of SOAObjectId{key={711}100.SystemName.ECC.SystemNumber.0020194035.SystemHome.HYDSAPUPG001, type=DESTINATION_TEMPLATE, processingState=NOT_PROCESSED, processingTraceId=000E0C60224800020000005B00000D88, delete=false} has failed.
Date: 2009-03-03
Time: 17:56:50:073
Category: com.sap.esi.esp.service.server.mass.BatchJobRun
Location: com.sap.esi.esp.service.server.mass.BatchJobRun
Application:
Thread: Timeout Event Processor [8]
Data Source: j2ee\cluster\server0\log\defaultTrace_00.trc
Arguments:
DSR Transaction: a69682d0070b11dea31f000e0c602248
Message Code:
Session:
Transaction:
User:
TimeZone: +0530
CSN Component: BC-ESI-WS-JAV
DC Component: tcesiesp~srv
Correlation ID: 6582850000175331
DSR Root Context ID: A69682D0070B11DEA31F000E0C602248
DSR Connection: a69682d0070b11dea31f000e0c602248
DSR Counter: 0
Host: blrkecsaptst2
System: CE2
Instance: J00
Node: server0
Log ID: 000E0C60224800380000003B00000D88
Can anybody please tell me the reason for the above two errors?
How can i solve this problem?Hello Guy, at least you should write how did you run into this error?(what steps did you perform?)
Kind regards! -
Oracle ASM and Database are coming up at the same time and running into ERR
We have Oracle 11G Grid Infrastructure and Oracle 10.2.0.4 running under grid user and oracle user.
Its AIX 61 LPAR.
I am running into this error when we do a reboot.
2010-07-22 19:21:48.581: [ RACG][1310] [667728][1310][ora.maksbx1.MAKSBX11.inst]: SQL> ORA-01565: error in identifying file '+MAKSBX01_DATA_DG1/maksbx1
/spfileMAKSBX1.ora'
ORA-17503: ksfdopn:2 Failed to open file +MAKSBX01_DATA_DG1/maksbx1/spfileMAKSBX1.ora
ORA-15056: additional error message
2010-07-22 19:21:48.581: [ RACG][1310] [667728][1310][ora.maksbx1.MAKSBX11.inst]: ORA-17503: ksfdopn:DGOpenFile05 Failed to open fi
ORA-01078: failure in processing system parameters
SQL> Disconnected
This is from $ORACLE_HOME/log/srvrname/racg/init<instanace>.log
After the reboot, wait for 5 min and if I run this command
srvctl start database -d MAKSBX1 -- DB Comes up with out any error.
What this tells me is, after the reboot, CRS/ASM is coming up and at the same time DB is also trying to come up and resulting in error.
Question is:
Where can I put a sleep 90 or 180 so that DB will come only after ASM is completely up. We didn't write or create any startup scripts for AIX, what ever is there is coming from Oracle 11g Grid and ORacle 10g Database.
Can some one please point me where I can find those init scripts and where i should either put sleep or dependency so that they don't collide.Hi,
please make sure that you have exported right SID
ORA-17503: ksfdopn:2 Failed to open file +MAKSBX01_DATA_DG1/maksbx1/spfileMAKSBX1.ora
echo $ORACLE_SIDand also export ORACLE_SID=+ASM1
$asmcmd
asmcmd> cd MAKSBX01_DATA_DG1
asmcmd> cd maksbx1
and check for spfileMAKSBX1.ora
ORA-17503: ksfdopn:string Failed to open file string
Cause: file open failed due to either insufficient OS permission or the name of file exceeds maximum file name length.
Thanks
So you are able to connect later using SRVCTL, hmmmm
Edited by: CKPT on Jul 23, 2010 9:06 AM -
Update one InfoObject to another runs into a memory issue
Hi.
We created a DTP for a backup of an InfoObject because there is a larger change to this object. So now we have a DTP transferring attribute data between one InfoObject to another. The interesting behavior we are facing is, that during execution of the DTP the program CL_RSDMD_UPDATE_MASTER_DATA reads the whole content of the Q-table from the target InfoObject which runs into a problem with the memory because there are up to 500.000rows read and stored to memory for every package. This is done to filter out duplicates and avoid writing to the database.
Is there any way to avoid reading the whole Q-table? Is this the behavior that occurs also during normal load?
Thanks in advance,
NilsPetrill,
Thank you. I was trying to do that yesterday, but it was grayed out. It seemed to work alright today.
Thanks,
Sheena
Maybe you are looking for
-
How can I revert back to Snow Leopard (10.6)?
Hello, I've had it. I can't take Lion any more!! I am one of the idiots who downloaded Lion the first hour it became available. Since then, my life has become a nightmare. Lion is so buggy---Apple blew it big time with this software. Multiple crashes
-
How to let TC F110 do the clearing of direct debiting
Dear friends, I have setup direct debiting for Denmark called PBS Leverandørservice in TC F110 with the necessary configuration. The payment method are working as a flat file downloaded to a local PC and then uploaded into PBS (today called Nets) usi
-
Help purchasing a new external hard drive
i need some info/help on choosing the feature set for a new external HD. the current one i'm using is only 5400 rpm with a 8 mb cache, connected via USB 2.0. i'm looking to replace it because when i play large video files off of the drive it drops fr
-
Can you create a BAND chart in Webi?
Can a Band chart be constructed in Webi 4 and if so, how? I've attached a screen shot of an example.
-
assalam alaykom about 2 days ago when I was connected my 5800 XM to OVI he told me I can update software and I do that immediately and change from v 51 to v52.0.101 the problem is the phone don't have Arabic language ( writing only) I can read Arabic