IDoc Acknowledgements w/ XI 2.0

Hi All,
We are attempting to utilize the IDoc Acknowledgment functionality that is built into XI IDoc Adapter. The documentation mentions this functionality briefly and says that all you have to do is add the ALEAUD.ALEAUD01 IDoc to the endpoint that is equal to the sending business system. I've done this, but nothing seems to happen. Does anybody have any experience with this functionality? Are there any detailed examples or documentation? Any help is greatly appreciated!
Thank you,
Jeff Kocur

Hi All,
I have now resolved this problem and thought I should spend some time sharing this with you.
I decided to look at the code that was issuing the error which was calling a function module called SAI_LOGICAL_SYSTEM_GET to return the logical system for my business system. When I ran the function module in test mode it returned a blank logical system. The logical system is stores in table sailcrbsc. I re-ran the function module with the bypass buffer field set to 'X' - now when the function module is called it returns the correct logical system.
Anyone out there have any more info on this? How should I have re-built this table?
Regards
Ian

Similar Messages

Logical system for IDoc acknowledgment?

Hi,
HTTP --> XI --> IDOC (with acknowledgment) is my scenario
whether the inbound and outbound parameters should be configured in the same logical system or in a different one (in transaction we20)
Thanks,
RPN

For IDOC acknowledgement ,go thru this and do the settings :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
This will help u :
Configuration Tips for a Business Service/Integration Process to send back ALE audit IDOC

IDoc Acknowledgement Issue in SAP PI 7.3

We have configured IDoc to IDoc scenario between two ECC system using IDOC_AAE adapter. When we run the RBDSTATE program to trigger ALEAUD IDoc it is getting failed in SM58 in ECC system. But when we configure a separate scenario to transfer ALEAUD IDoc from one ECC to other ECC system usin IDOC_AAE adapter then the ALEAUD IDoc reached in target ECC system. In this case there is no error in SM58 of ECC system.
SM58 Error: Commit fault: ASJ.ejb.005043 (Failed in component: sap.com/com.sap.aii.ad
Regards,
Anurag

Hi Anurag, Hasan,
Check the following OSS Notes, they are both addressed to the error you mentioned (appearing under different circumstances, so you might have to choose the right one):
1719180 Handling of multiple acknowledgements in one ALEAUD IDoc
1729575 Sending IDoc acknowledgements fails because of long text
Regards,
Greg

Suppress Idoc acknowledgement in SAP PI 7.3

Hi Experts,
I need to suppress ALEAUD Idoc acknowledgements in PI. My scenaros is Idoc (ORDRSP) to file pass through.
Aleady entries are maintained for ORDRSP idoc in IDXNOALE table.
in SE16, IDXNOALE--> Selected ORDRSP entry--> change mode --> I have deleted values for NEG and TYPE, when i trigger Idoc from ECC, first time i am not getting acknowledgements but once i trigger automatically NEG value is updating as "X", from next time i am getting acknowledgements.
I have executed IDX_NOALE report in SE38, If i select ORDRSP message type and click on DoNotRequestAcknowledgments, its asking do you want to overwrite for all? if i select yes, all entries are deleted.
Help me to suppress these ALEAUD acknowledgements in SAP PI 7.3.
Attached is the enries i have updated.
Thanks & Regards,
Mohan.

Hi Harish,
I have checked this thread, As i mentioned earlier
I have executed IDX_NOALE report in SE38, If i select ORDRSP message type and click on DoNotRequestAcknowledgments, its asking do you want to overwrite for all? if i select yes, all entries are deleted.
To suppress idoc acknowledgements, do we need to add entries in IDXNOALE table or do we need to delete existing entreis by using report IDX_NOALE?
If i change NEG and TYPE values as empty, first time its working however next time automatically NEG value is updating as "X" due to that i am getting acknowlegement agan in the second time.
I am confused.
Thanks & Regards,
Mohan.

IDOC Acknowledgment

Hello All,
My scenario is SAP(IDOC) -
>XI-->SAP(RFC synchronous)--> Webservice(synchronous) using BPM and Scenario running successfully.
But my new approach is Source SAP(IDOC) expects the acknowledgement , If BPM process is success till step and after expects acknowledgement if it success.
Normally we used RFC/CWLD/ to send back the response about IDOC to source SAP system if the whole BPM process is success. But at the moment we don't want call the RFC/CWLD instead RFC we need to send the IDOC acknowledgment
So what is approach i need to follow from here? I am looking forward from you.
Thank you very much.
Kindest Regards,
Sateesh

Hi Bhavesh/ Indranil
Thanks for your great response.
@Bhavesh: I have little doubts related to your answer
                      1) SYSTAT IDOC is need to be import from sender SAP side?
                      2) is their any more configurations are required between XI and Sender SAP?
                      3) instead of using SYSTAT IDOC can I use ALEAUDIT01?
@Indranil:
          My Scenario is SAP(IDOC sending)->XI->RFC Call syn(SAP)-->Webservice(SOAP Sync)
Idoc is receviing to XI from Sender SAP system and it send to target SAP system using RFC call and getting RFC response back from target SAP and the response RFC is map Webservice call and get the response from Webservice call by status, If the status is 'success' then I am sending the IDOC number status back to sender SAP
system using RFC/CWLD call.
But using insted of RFC/CWLD call I need to use the IDOC acknowledment to send back to sender SAP system.
Please guide me how i will follow here. Thank you.
Kindest Regards,
Sateesh

How to get Idoc acknowledgment in File to Idoc scenario

Hi All,
Please give suggestions about the below mentioned scenario:
Scenario: FileXI- ECC - Data from File is converted to various IDocs and posted in SAP. (No BPM used)
Problem: Exception Handling > > We want a message back from SAP system telling us that out of 100 IDocs that were sent, n were posted successfully and rest failed along with the error description. How can this be achieved?
Regards,
XIer

Pls go thruough these links also
Please see the below links
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
unable to import from SLD
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
IDOC Acknowledgements
R/3 IDOC ->XI-> ORACLE Error Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
Regards
Abhishek Agrahari

How to Send Idoc Acknowledgements back to Http sender (Http to Idoc)

Hi
I have scenario: Http To Idoc
first requirment:
i need to map xml file come from HTTP Sender to Idoc (SAP system), and need to send Idoc acknowledgements/status back to Http sender.
second requirment:
while mapping COM Xml file come from Http to COMMAT04 idoc into SAP system i need to to check whether corresponding material already exist in R/3 or not, if material is not exist, process should be cancelled and alert should be raised. ( i mean to say before sending COMMAT04 idoc into SAP, corresponding material should be exist already, if not alert should be send to http sender)
please thrown some inputs, if sombody has already done with htis....
Thanks in Advance, and help would be appreciated..
Thanks and Regards
Rajesh Babu

Just providing the specifics that Suhail has intended.
How to handle IDOC Acknowledgements in XI.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
RFC Mapping Lookups:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a03e7b02-eea4-2910-089f-8214c6d1b439
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 7, 2008 3:32 PM

Idoc acknowledgement message to web service

I am trying to set up the scenario SOAP sender>XI>IDoc Receiver.
I have exposed the outbound, synchronous message interface as a web service, and I'm planning to use sync-async bridge in BPM.
My problem is: I need a response message from SAP. Can I use an iDoc acknowledgement message for this purpose? If this is the case, how do I set up SAP to send this acknowledgement message to XI, and do I have to configure an iDoc sender channel for this purpose?
Any comment is appreciated!
Thanks,
Håvard

One option - not a ABAP expert but this is what I understood with my discussions with my ABAP team when we were coveringt he same issue -
In the Idoc Inbound Processing Code - write a ABAP Exit that after processing the Idoc will trigger the RBDSTATE report to trigger the AleAudit back to XI and XI will send it back to R3.
It is surely possible, as the Aleaudits are triggered by RBDSTATE report instead, you can manually makde the Idoc procesing code to trigger this report immdeitaly and so on.
An Abap , Ale_Idoc specialist will have the answer to this in seconds - on how to do this - but am not one
Regards
Bhavesh

Idoc Acknowledgements and BPM.

All,
My current requirement is to post an Idoc from my BPM, and get back the Idoc Acknowledgement. On the basis of the status field in the ALEAUDIT Idoc I need to determine the further course in my BPM.
Option 1:
1. In the Send Step of my BPM , I can request for Application Acknowledgement. I have done this and am able to receive the Acknowledgement and see the same against the Acknowledgement Msg ID in MONI. I am able to see the ALEAUDIT idoc triggered for my Send Step back to my BPM .
The question in case we are to use this Option is , how do I access this AleAudit Idoc message in my BPM. As I want to have a switch, I need this to be populated in a container element of my BPM. Is this possible? Is this approach a correct one? Any Ideas?
Option 2
I can have a Send Step in my BPM to send the Idoc from XI to R3. this will be a normal Send Step with no Acknowledgements. I can also use a Receive Step in the BPM to receive the ALEAUDIT Idoc back to the BPM.
This I guess can be done with a Receive determination where R3 is the sender and the AleAudit Idoc is the receive etc.
Issues with this approach, I need to use a Correlation against the Send and Receive Step to send the Idoc and receive the AleAudit.
1. What is the Correaltion that can be used? Is there a standard correaltion. for such cases?I looked into the Idoc and the AleAudit but could' nt find a suitable Correlation Field.
Do both these solutuons make sense? has anyone got a better approach?
Any comments are appreciated.
Regards
Bhavesh
PS: Have gone through the How to guide on Idoc Ack's and the blogs on SDN as well. But if still someone feels that there is a blog that is relevant to this issue, please do let me know if I have missed anything.

Ha, now that was interesting question. Brains were rusty, relooked into that lookup and these are the fields of the IDXRRCVPOR we use,
Used the RFC - RFC read table
XI's Idoc Number is in Field IDOCNUMBER
Original SAP IDoc Number is in Field SNDLAD.
Code excerpt attached below.
@ Henrique : Work's been crazy past few months. The blog is on my to do list, hopefully someday soon it should be out. My Apologies guys!
Channel rfcChannel = LookupService.getChannel(BusinessService, CommChannel);
//As the call is being made to RFC, RFCAccessor is obtained.
rfcAccessor = LookupService.getSystemAccessor(rfcChannel);
rfcXML =
 "<?xml version=\"1.0\" encoding=\"UTF-8\"?><ns0:RFC_READ_TABLE xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><DELIMITER/><NO_DATA/><QUERY_TABLE>IDXRCVPOR</QUERY_TABLE><ROWCOUNT/><ROWSKIPS/><DATA><item><WA/></item></DATA><FIELDS><item><FIELDNAME>SNDLAD</FIELDNAME><OFFSET/><LENGTH/><TYPE/><FIELDTEXT/></item></FIELDS><OPTIONS><item><TEXT>IDOCNUMBER EQ '"
 + SourceDocNum
 + "'</TEXT></item></OPTIONS></ns0:RFC_READ_TABLE>";
inputStream = new ByteArrayInputStream(rfcXML.getBytes());
XmlPayload inPayload = LookupService.getXmlPayload(inputStream);
Payload outPayload = rfcAccessor.call(inPayload);
responseStream = outPayload.getContent();
DocumentBuilderFactory factory =DocumentBuilderFactory.newInstance();
/* Create DOM structure from input XML */
DocumentBuilder builder = factory.newDocumentBuilder();
Document document = builder.parse(responseStream);
NodeList list = document.getElementsByTagName("WA");
for (int k = 0; k < list.getLength(); k++) {
 Node node = list.item(k);
 if (node != null) {
 node = node.getFirstChild();
 if (node != null) {
 if (!node.getNodeValue().equals("")) {
 OutputDocNum = node.getNodeValue();
Regards
Bhavesh

IDOC Acknowledgement and Header Mapping

Dear all,
I've got the following scenario:
SAP 4.6C is sending many different IDOCs to XI 3.0 (SP14).
On XI side there are several integration processes, business systems and business services receiving the IDOCs.
I want to create IDOC acknowledgements and send them back to SAP system.
For one integration process I was able to successfully create and send back an acknowledgement by following the steps described in the very good blog:
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Now I want that every integration process/business system/business service is sending back an acknowledgement with the same logical system name (meaning "this acknowledgement is coming from XI").
As it is not possible to enter the same logical system name for more than one process I created a receiver agreement with:
Sender Service = the integration process
Receiver Service = the SAP 4.6C business system
Receiver Interface = ALEAUD.ALEAUD01
Receiver Communication Channel = IDOC receiver channel called "Ack_IDOC_Receiver", existing in SAP 4.6C business system and pointing to this system
Additionally I created a header mapping in this receiver agreement where I set the Sender Service to the business system of the XI system.
Unfortunately the tests showed to me that obviously the header mapping (maybe even the whole receiver agreement) is being ignored completely as no Acknowledgement IDOC will be created. Instead I get the error message "Unable to convert sender service to an ALE logical system".
I also played around a bit with the options "Apply Control Record Values from Payload" and "Pass Sender value from Payload" but this didn't make any difference.
Why is the header mapping not replacing the sender service in the acknowledgement message?
Best regards,
Tobias

Tobias,
we have the same Problem.
we´re sending with Receiving Partner "12345" and the IDoc in the target System is filled with the standard SAP Value maybe the one configured in the SDL.
We have configured our IDOC_REceiver with a mark on "Apply Control Record Value from payload".
If you have a look at the SAP Helpfile you will find out that some header fields are not be changeable and get the value from sap.
like IDOC-Number, Receiving Partner and maybe the sender service ???
Regards,
Gordon

IDoc acknowledgement again :)

Hi Expers
i am realy strugling with IDOC acknowledgement!!
i am following the Howtodo doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb..
According to this document
page no 3(scenario 2. Externel system -XI-SAP)
and page no 26...
we can route the Idoc Ack ALEAUD to the sender system as a XI request message.In the Integration Server,we have to call transaction SE38, and run program IDX_ALEREQUEST to process IDocs with message type ALEAUD as XI request message.
Enter Sender Port, Sender Client,
Partner Number, Partner Type, and
Partner Role..
but m unable to execute this scenario... nothing is showing in Moni
Can anyone put some light on tha???
Thanx
Biplab

Receiver adapters support system acknowledgments if they are requested by the server.
They are triggered if the message is processed successfully by the adapter.
The receiver adapters do not support any application acknowledgments.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender.
Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed.
Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments.
Sender adapters of the Adapter Engine do not request any acknowledgments

Idoc Acknowledgement ALEAUD.ALEAUD01

Experts,
I have scenario like this: File(File system) XI/PIIDOC (R/3 sytem), this scenario works fine as is.
Now, i have to send back an IDOC acknowledgement from R/3 system to XI system. I used the link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb]
and all configuration is in place. some times it works, n some time it wont.. this is beacuse I make some permutation n combination of changes, in some of the steps mentioned in the URL.. so, I dont know where I am going wrong..
Note: I did read related SDN posts..
your answers are highly appriciated.
Thanks!

Hi Prema,
1. Was the IDOC was created successfully?
-> Check whether IDOC was created correctly using transaction WE05/WE02/BD87. The issue could be due to partner profile setting, port setting or conditioning setting of your ALE distribution model.
2. Was the IDOC was sent successfully?
-> Check whether number of created IDOC using transaction WE05/WE02/BD87 match with the number of IDOC going thru PI? If it is, then the IDOC was NOT created, and you might want to check the background job that runs RBDSTATE using transaction SM36/SM37
3. Was the IDOC stuck in the PI?
-> You might want to check using SXI_MONITOR and try to fix the issue
Regards,
Lim...

IDOC Acknowledgement Error

Hi All,
I am getting "Receiver exists , No filters , No conversion , No version change" message in IDOC Status of ALEAUD. And IDOC has not been sent to XI System.
I have done the settign for Idoc acknowledgement.
What is the reason of this message.?

this is inbound message that i am getting..
<?xml version="1.0" encoding="UTF-8" ?>
- <ALEAUD01>
- <IDOC BEGIN="1">
- <EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>900</MANDT>
<DOCNUM>0000000002416250</DOCNUM>
<DOCREL>620</DOCREL>
<STATUS>30</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>ALEAUD01</IDOCTYP>
<MESTYP>ALEAUD</MESTYP>
<STDMES>ALEAUD</STDMES>
<SNDPOR>SAPEIT</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>EITCLNT900</SNDPRN>
<RCVPOR>SAPXID</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>XIDCLNT300</RCVPRN>
<CREDAT>20071105</CREDAT>
<CRETIM>190225</CRETIM>
<ARCKEY>A05D0C308BBB11DC8598001A4BA967D2 0000000000573053</ARCKEY>
<SERIAL>20071105171956</SERIAL>
</EDI_DC40>
- <E1ADHDR SEGMENT="1">
<MESTYP_LNG>Z_MLS_INBOUND_RECEIPT</MESTYP_LNG>
- <E1STATE SEGMENT="1">
<DOCNUM>0000000000573053</DOCNUM>
<STATUS>64</STATUS>
<STACOD>SAPB1999</STACOD>
<STATXT>& & & &</STATXT>
<STAPA1>Immediately processi</STAPA1>
<STAPA2>Unable to interpret</STAPA2>
<STAMQU>SAP</STAMQU>
<STAMID>B1</STAMID>
<STAMNO>999</STAMNO>
<STAPA1_LNG>Immediately processing not possible:</STAPA1_LNG>
<STAPA2_LNG>Unable to interpret EGOD3 as a number.</STAPA2_LNG> - <E1PRTOB SEGMENT="1">
<DOCNUM>0000000002416235</DOCNUM>
</E1PRTOB>
</E1STATE>
</E1ADHDR>
</IDOC>
</ALEAUD01>
In 'Ack' i am getting this message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Ack xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Status>Error</SAP:Status>
<SAP:Category>transient</SAP:Category>
</SAP:Ack>

Idoc Acknowledgement in File

Hi All,
I came through some threads in SDN regarding Idoc acknowledgement and followed handling Idoc acknowledgement document. I am able to get back acknowledgement(ALEAUD) in Xi.
I configured a scenario to receive this acknowledgement in File.
But i am not able get the acknowledgement in the File.
In SXMB_MONI ,in the pipeleine step Technical Routing of Response i am getting Acknowledgement Message Stopped.
How to rectify the above error..I need to get the acknowledgement back in File..?
Is it possible to do without BPM..?
Hoping for good solution..
Thank You
Regards
Prakash

Hi,
If you are lokinf for IDOC acknowledgements means check these
setting up Audit Response.
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
ALEAUD need at least following fields to be filled:
E1ADHDR/MESTYP: original message type
E1ADHDR/E1STATE/DOCNUM: original IDoc number
E1ADHDR/E1STATE/STATUS: 68 in case of error, 53 in case of success
E1ADHDR/E1STATE/STATXT: Short description for R/3 user what has happend
If you are using XI 3.0 SP12 then there is some bug See : 828277
Just have a look into this blog-/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Or else if you are looking to receive the File Acknowledgements means have a look at this
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
Regards
Seshagiri

Error by sending IDOC-acknowledgements

Hello,
we have the following scenario:
R/3 IDOC -> XI -> Mail-Adapter
We want to receive acknowledgements from the adapter.
But we get the error "Sender XI Party http://sap.com/xi/XI / XIParty / xyz couldn't be transformed to an IDoc Partner".
Does anyone know how to solve this problem?
Regards,
Thorsten

Hi,
Ok then,
Only the IDOC-acknowledgements couldn't be sent back to the R/3.
1.By any chance, did you check the
IDXNOALE table: and see if the port, the
client of the sender, and the message type id there.If yes then that table lists and block your acknowledgement.
2. Check this, "Use transaction SXMB_ADM ( Integration
Engine - Configuration) to obtain system
error acknowledgments from pipeline
services of the Integration Server and
maintain the specific configuration
parameter ACK_SYSTEM_FAILURE of the
RUNTIME category.Whenever a system error occurs within the Integration Server, a system error
acknowledgment is sent back to the sender.But this is for system error acknowledgements.
3. Did you refer the guide: "How To Handle Acknowledgments for IDoc"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
OR
https://websmp106.sap-ag.de/nw-howtoguides
Then go to exchange Infrastructure.
Regards,
Anirban.

IDoc Acknowledgements w/ XI 2.0

Similar Messages

Maybe you are looking for