IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

Similar Messages

IDoc adapter inbound channel: Error Error while read

Dear All
I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
IDoc adapter inbound channel: Error Error when reading
Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.

Please clear these points.
In PI system:
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
3. Using IDX2 import the IDOC meta data in to your PI system.
RFC destination to which direction , towards sender of IDOC ?
Port of which system sender system or receiver system?
What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
What will be the procedure of seeing complete message on SM58.
-->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
-->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
-->coming to IR you need to create the:
                    1. Receiver data type.
                    2. receiver message type
                    3. receiver message interface. No need to create the above 3 for sender.
                   4.while mapping source is your Idoc and target is your receiver message type.
                   5. while interface mapping source is Idoc and target is receiver interface.
-->Coming to ID no need to create sender communication channel and no need to create sender agreement.
-->create receiver communication channel and receiver agreement.
--->create Interface determination.
-->create receiver determination.
-->If message got stuck in SM58, unlock it by using double click or activate the selected message.
Thanks

IDoc adapter inbound channel: Error Fehler beim Le

Hello,
I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
Can Someone help me?
Caller Function module Target system Date Time Status text
SRGEN13 IDOC_INBOUND_ASYNCHRONOUS RHXCLNT013 07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
Thank you
PM

I want to know if the Connections have to have SNC?
I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
Inbound and outbound connections should be secured by Secure Network Communication (SNC).
Is that correct? maybe that's why it says the that error
PM

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

Error when reading Exchange Profile

Hello everyone,
I have a simple file=>XI=>file scenario.
The sender file adapter picks up the file fine.
File is put-to and retreived-by the queue just fine.
I then get the error "Error when reading Exchange Profile for system .. and client ..."
SLDCHECK gives error "Connection to SLD does not work"
LCRSAPRFC and SAPSLDAPI have been test and work fine.
Any ideas?
Thanks in advance
Dimitris

Hi,
Try this:
<a href="http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm">SLDCHECK</a>
and this note:
764176 (which gives a quick solution foor all SLD problems)....
Regards
Suraj

SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Trying to send Idocs from SAP ECC6.0 via PI 7.0 up until 2 days ago there was no problem.
Since yesterday, only one specific type of Idoc does not make it into XI (PI). In the Idoc monitor (WE02) the idocs that were created gives status 3 which is good. But all Idocs of that specific type (ZRESCR01) does not go to XI. I can only find them bakc in SM58 where it gives the following message:
IDoc adapter inbound: IDoc data record table contains no entries
I have checked SAP notes 1157385 and also 940313, none of them gives me any more insight into this error. I have also checked all the configuration in WE20, SM59, and in XI (repository and directory) and in XI IDX1, IDX2 but could not find anything that would cause this. I can also not think of anything that changed since 2 days ago.
Please point me in the right direction.

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

XI : Error read exchange profile

Hi,
we have upgrade a XI 20 to XI 70 and all seems ok but when we test the system to send an idoc to the XI 70 from our R3 we got this error in
Transaction Canceled IDOC_ADAPTER 106 ( Error while reading exchange profile for system XSD )"
in SM21 in Xi 70 and in SM58 in R3.
We have revised our configuration and all seems ok.
It seems like IS cann't read the exchange profile but our test all ok.
How can we check this?
Thanks in advanced.

Hi,
In the web access to SLD I see the link "Administation" in Greyed Out.
What about this?
The user has LcrAdministrator ume role.
Thanks in advanced.

Issue about IDoc Adapter Receiver Channel's Performance

Hi Everyone,
Currently, I am working on a scenario of File -Integration Process - IDoc in XI 3.0 with patch level 16. The scenario works fine when it process one/two/three files in parallel, and the IDocs arrive R/3 system quite fast. But when I try four files in parallel, the whole XI server blocks, I can not do anything even logon Integration Builder, and the IDocs arrive R/3 brokenly, sometime with the invterval to 10 minutes. When the XI comes back, I found all the four integration processes finish successfully and each transaction works fine and fast. What's more, after I change the IDoc Adapter receiver channel to a File Adapter receiver channel, it works fine for even 20 files in parallel. So I think it is some issue about IDoc Adapter receiver channel. Does anyone have the same experience as me? Any comments will be appreciate.
Regards,
Nick

Hi Nick,
Can you check this Blog-
/people/sreekanth.babu2/blog/2005/01/05/delayed-xi-message-processing
May be useful.
How are you picking the files .. You can try with EOIO options while picking the file.
But if you use BPM, it is not applicable. It will act as a EO only.
Check this SAP Note- 833740
Thanks,
Moorthy

Idoc adapter- communiccation channel

Hi
When we do an Idoc to file scenario sender communication channel is not required. Because Idoc is the sender adapter. but while doing a File to Idoc case why do we neeed a receiver communication channel. Here also we use Idoc so why use a communication channel ?

Hi,
You do not need A Sender IDOC Adapter. IDoc's are sent directly to XI's Integration Engine and so no need of Sender IDOC adapter and therby Sender Agreement as well.
Yes, the port will be a TRFC port and you will use the RFC destination created in SM59 in this port.
Idoc Metadata gets loaded automatically when your scenario is run. You can also do it manually, by going to IDX2 and probiing the Port and the Basic Type of the idoc whose metadata you want to load.
but when we go for a fileto IDOC the file does not contain a standard structure
for that reason we need to create the receiver IDOC adapter .
pls chk this links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
if found worth pls do the req
Thanx
Sampath

Error message when assign task profile

Hi Expert,
SAP system 4.0B, i create a new activity group in PFCG and assign responsibility in it.
I already generate the responsibility and when i assign to user id in SU01 error message come out.
Profile for activity group not yet generated
Message no. 01 070
Diagnosis
You are assigning a user with an activity group. Although this activity
     group already has a designated profile name, the profile has not yet been
     generated.
System response
The user does not yet have the designated profile.
Procedure
Use the Profile Generator if you want to generate a profile. Remember
     that you that you must execute a user comparison once you have generated
     the profile.
As i already generate the activity, why the system still say that the activity group not yet generated?
Please advice.
Thanks
regards,
ng chong chuan

Hi Alex Ayers,
The error when double click, there was nothing pop up.
After generation in SUPC for responsibility RY type and the status show "Generation here not allowed/possible".
SAP version 4.0B.
Please advice.
Thanks.
regards,
ng chong chuan

Receiving Error 550 when using Exchange via another software application.

Here's a good one (and I hope I'm able to explain this correctly)....
I work at a hospital where we have a gym facility that is open to employees and also to the public. We use a client management system called Twin Oaks. This Twin Oaks software has email functionality that uses an Exchange user account to send
group emails out to clients (this avoids the front desk staffers from having to create email distro groups in Outlook to send out mass emails).
I worked with the Twin Oaks support staff to get the email integration set up with our Exchange server (it was an easy process, entering the SMTP server name then a few other basic settings).
Emailing through the Twin Oaks software works, but only to clients who have INTERNAL hospital email addresses. The messages are failing to go out to any client that has an external email address (Error 550 states the address is unavailable).
Twin Oaks' response to this is that we have some type of firewall that is preventing the delivery of these emails to external addresses. This is not the case and I can't seem to find any reason that would prevent the mails from going out. We
can email external addresses direct from the generic account we set up for this purpose, but for some reason, the mails are not going when they are sent through Twin Oaks application.
We are using Exchange Server 2010. I can't find any transport settings or policies that would prevent emails from going to external addresses and am stumped as to why this isn't working.
Has anyone else experienced these types of issues when using Exchange through another software application to send messages?
Any responses would be greatly appreciated!

Hi,
Based on the description, you could send email to external addresses without the Twin Oaks software. However, with the Twin Oaks software, you couldn't send successfully.
For this issue, I recommend you enable message tracking and check whether you could retrieve message tracking log entires when you send emails to external addresses through the Twin Oaks software.
If you couldn't retrieve message these tracking log entires when you send emails to external addresses through the Twin Oaks software, it means that the Exchange server is OK and the crux of the problem is the Twin Oaks software.
Here is an article about message tracking log for your reference.
Get-MessageTrackingLog
http://technet.microsoft.com/en-us/library/aa997573(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Error message when reading PDF files

I'm running FFox 5.0 and have the Adobe Acrobat plug-in (V10.1.0.534). My system in WinXP/SP3. I recently updated my Adobe Reader to Version X and ever since then I encounter an error when trying to read a pdf document on a web site. The document comes up, but in a bit of a strange way. First I get an "(JavaScript Application)" error box showing the message "Load: TypeError: browser is unidentified." Then when I touch the OK button the document is displayed, but with a double window header, the upper one showing "Mozilla Firefox" and the lower one the orange-shaded "Firefox v". As I said, the document is displayed OK, but something isn't normal. Is it the fault of the updated Adobe Reader, or FFox V5, or what?

Does it work the first time after you delete your Normal.dotm file? You may be running into the same issue that is detailed in this post Unable to open document. Please check to see if you have read permission for the above file.

Visa error -1073807339 when reading or writing to com 2

Good morning,
I am using both com 1 and com 2 to communicate with instruments using Labview 7.1 and Windows XP. Com 1 which works without any problems is communicating with a HP 34970A and com 2 which sporatically works is communicating with a Valhalla 2430 power analyzer. When I get the error, I open MAX and com 2 has an explanation point indicating a problem.
Thanks for your help.
Everett

Hello again and thank you for all the responses. Valhalla charges money for their driver so I doubt they would want it posted in the discussion forum. I ran NI-Spy and will attach the logs. I also changed the byte count from 32 to various lower numbers but 21 seems so far to operate without an error running the Valhalla VI only. This afternoon I will try it again in the program to see if an error occurs or if I don't get my data sometimes. Capture 1 was done using max and open visa for com 2. I ran it several times. Capture 3-1 is after I changed the byte count to 21 and added some delay on the VISA read.
For some reason it won't let me post a .spy extension
The file does not have a valid extension for an attachment. jpg,gif,txt,xls,vi,zip,doc,bmp,llb,pdf,png,seq,c,h,cpp,cs,vb,ini,gz,ctl,scr,ico,tar,z,uir are the valid extensions
Everett

Error -36 when reading/writing with firewire drives (400 & 800)

This is only happening when I connect the drives to my G5, but the drives work fine on my MacBook Pro. I first thought I had a problem with my drives, but then when they worked on my laptop I figured it must be a problem with my G5. One of the drives is a smartdisk firelite drive connected via firewire to the front of my G5, the other is a G-Drive connected via FW 800 in the back of my machine.
Any ideas of what I need to do on my G5 to fix this issue?
Thanks!

Hi-
The error is an I/O error. One possible cause is low power on the firewire bus, or, the drives require more power than is available. Placing a powered hub between the G5 and the drive may be the solution.

Error-200279 when reading Analog Wfm Nsample

I'm calling the attached VI at least 10x in the main VI and works fine but sometimes it's giving me an error-200279. Can someone please tell me why?
Thank you in advance.
KowdTek
LabVIEW 2009
One Step At A Time, Maybe Two...
Solved!
Go to Solution.
Attachments:
Detect Frequency.vi ‏25 KB

Your buffer isn't big enough.
You are collecting 20,000 samples per second, but only set it for 2000 samples per channel. So that is 1/10 second worth of data. You are reading 1000 samples at a time, so about 1/20th second. If the loop is running fast enough, you can keep up and won't get an error.
If there is a small delay (perhaps Windows goes off and does something else for 50 or 100 msec.) your buffer will overflow.
I'd suggest eliminating the 2000 constant where you set the samples/channel and try again. See if it behaves better.

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Similar Messages

Maybe you are looking for