IDOC Adaptor Errot

Hi,
My scenario is file to idoc... i am getting this error.
Error: FM NLS_GET_LANGU_CP_TAB: Could not determine code page with RFCDEST_R3 I::000 FM NLS_GET_LANGU_CP_TAB
Regards,
Ansar.

Ansar,
This is a problem that is due to insuffcient authorizations.
Please refer into note 747322 for more info on this.
Also, note 837595 : Discuesses the list of authorizations needed for Idoc's. Make sure the user used in Sm59 has this authorizations.
Regards
Bhavesh

Similar Messages

Error while using idoc adaptor

Hi,
Can anyone explain me what does this error mean.Im doing a file to IDOC scenario
<SAP:Stack>Error: MSGGUID 2B8185203F5911DCBF410002556AD065: Tag found instead of tag IDOC BEGIN=</SAP:Stack>
Thanks in advance,
Bhargav

Hi,
Can anyone explain me what does this error mean.Im doing a file to IDOC scenario
<SAP:Stack>Error: MSGGUID 2B8185203F5911DCBF410002556AD065: Tag found instead of tag IDOC BEGIN=</SAP:Stack>
Thanks in advance,
Bhargav

Inbound IDOC using XML

Hi,
I need to create an Inbound IDOC using Function modules using an XML file as Input.
I am using mySAP ERP 2004(WAS 6.4).
IDOC type : HRMD_A05
Message Type : HRMD.
I am using the FM's in an ABAP report for testing, reading the data from the XML File using the FM GUI_UPLOAD .
I tried using the FM IDOC_INBOUND_XML_VIA_HTTP,with import parameters XML_STREAM, CONTENT_LENGTH, CONTENT_TYPE, REMOTE_ADDR.(ALL Type Strings)
This FM creates the IDOC successfully but i do not get the status record for the IDOC as there are no export parameters or tables where i can get the value.
I am trying using the FM IDOC_INBOUND_XML_SOAP_HTTP,with import Parameters as XML_STREAM type XSTRING,and there is the export parameter ASSIGN ,type IDOC_ASSIGN_TAB and i was wondering if this could return the status.
I used the same XML and used the FM "SCMS_STRING_TO_XSTRING", to convert the file input string into XSTRING.
On executing this i get the exception,"NO DATA RECEIVED" .
Can anybody Please Tell me
1)How to get the status of an IDOC if i use the FM IDOC_INBOUND_XML_VIA_HTTP ?
2)How to use the FM IDOC_INBOUND_XML_SOAP_HTTP ?
3)Is there any other way to create an IDOC with XML input?
Thanks,
regards,
Siddhartha Jain

HI Nagarajan,
I had checked the first link mentioned by you and activated the required service from Transacttion SICF,but still it didn't help.
The second link points to the IDOC Adaptor for XI,guess it won't help as i'm not using XI.
I want to pass XML data read from file and call a FM which creates and posts and IDOC into R/3 and returns the IDOC Number and Status.
For this i found the FM's IDOC_INBOUND_XML_SOAP_HTTP and IDOC_INBOUND_XML_VIA_HTTP.
The FM IDOC_INBOUND_XML_VIA_HTTP accepts xml as string and posts IDOC succesully,but i do not get the status and IDOC Number.
The IDOC_INBOUND_XML_SOAP_HTTP accepts xml as xstring,so i used the FM SCMS_STRING_TO_XSTRING to convert the same xml string to xstring and pass it to the FM.But it gives an error 'NO DATA RECEIVED'.
If i make few changes to the XML doc,to include SOAP envelope ,like
<?xml version="1.0" encoding="UTF-8"?><HRMD_A05>.......</HRMD_A05>
to
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><IDOC BEGIN="1">.......</IDOC></soap-env:Body></soap-env:Envelope>
I get the error,the tag <IDOC BEGIN="1"> not found ,the IDOC XML should be of format <IDOC BEGIN="1"> <IDOC>.
Can anybody please help on what to do/how to proceed.
Thanks,
Regards,
Siddhartha

Ws to idoc

HI,
I am getting an error in my out bound message.
When i checked in IDX5 ,I am Geeting the Outbound messages displayed there with same error"
In SXMB_MONI the error is in "Out bound status "there it shows a red flag.
over all sucess flag is shown.
" <?xml version="1.0" encoding="UTF-8" ?>
- <ATT_ABS01>
- <IDOC BEGIN="Constant">
- <EDI_DC40 SEGMENT="Constant">
<TABNAM>PTEX2000</TABNAM>
<DIRECT>Constant</DIRECT>
<IDOCTYP>ATT_ABS01</IDOCTYP>
<MESTYP>ATT_ABS</MESTYP>
<SNDPOR>SAPADR</SNDPOR>
<SNDPRT>SAPADR</SNDPRT>
<SNDPRN>SAPADR</SNDPRN>
<RCVPOR>ADRCLNT200</RCVPOR>
<RCVPRN>ADRCLNT200</RCVPRN>
</EDI_DC40>
- <E1BP7011_1 SEGMENT="Constant">
<EXTSYSTEM>KCRS_D</EXTSYSTEM>
<EXTAPPLICATION>CATS</EXTAPPLICATION>
</E1BP7011_1>
</IDOC>
</ATT_ABS01>"
This is message seen and no perticular error info in error tab.
Is it problem with IDOC Adaptor?
Please let me know.
Thanks,
Srinivas

Hi Srinivas,
I replied the answer for this question in your earlier thread,I just want to know my answer is helpful or not.
Please let me know if you have any help regarding this.
Thanks and Regards,
Chandu.

Error in wsto idoc scenario

HI,
I am getting an error in my out bound message.
When i checked in IDX5 ,I am Geeting the Outbound messages displayed there with same error"
" <?xml version="1.0" encoding="UTF-8" ?>
- <ATT_ABS01>
- <IDOC BEGIN="Constant">
- <EDI_DC40 SEGMENT="Constant">
<TABNAM>PTEX2000</TABNAM>
<DIRECT>Constant</DIRECT>
<IDOCTYP>ATT_ABS01</IDOCTYP>
<MESTYP>ATT_ABS</MESTYP>
<SNDPOR>SAPADR</SNDPOR>
<SNDPRT>SAPADR</SNDPRT>
<SNDPRN>SAPADR</SNDPRN>
<RCVPOR>ADRCLNT200</RCVPOR>
<RCVPRN>ADRCLNT200</RCVPRN>
</EDI_DC40>
- <E1BP7011_1 SEGMENT="Constant">
<EXTSYSTEM>KCRS_D</EXTSYSTEM>
<EXTAPPLICATION>CATS</EXTAPPLICATION>
</E1BP7011_1>
</IDOC>
</ATT_ABS01>"
This is message seen and no perticular error info in error tab.
Is it problem with IDOC Adaptor?
Please let me know.
Thanks,
Srinivas

HI,
Did you mapped any thing in you MM for IDoc Control segment,EDI_DC40..?
if yes check direction is 1 outbound,2 inbound..and rest of all configuration parameters clearly check..
Please find the status in we02,
and also check the sxmb_moni
let me know the actual error.
Regards
Chilla..

XML-IDOC inbound for ECC 6.0

Hi,
in a ECC 6.0 only landscape we would like to process XML-IDOC in inbound. For outbound we have already create a XML-IDOC port... but I don't be able to find it for inbound.
How can I do it ?
Regards.
Ganimede Dignan.

Hi,
it's quite simple, if you have a system base on NW 2004s or newer you have all that you need but take in mind XML-IDOC it's not a Free XML .... it's an XML structure as an IDOC.
In WE21 TCODE you can set-up and "XML File" port or and "XML Http" port.
In anyway you can parser each XML by ABAP custom code.
read olso some of my old notes....
IDOC_INBOUND_FROM_FILE => called within report RSEINB00
IDOC_XML_FROM_FILE         => not called by any report (on release 4.6c)
I have used fm IDOC_XML_FROM_FILE already many times to manually transfer XML-IDocs from one SAP system to another.
Given the fact that report RSEINB00 is quite simple (see below) you could create your ZRSEINB00 for processing XML IDocs.
The reports can be scheduled in background to process the inbound IDocs continuously.
REPORT RSEINB00 MESSAGE-ID E0.
* EDI inbound processing (main program to be scheduled)
* This program processes one file with one ore more intermediate
* documents. When an error occurs, a message will be send via workflow
* processing.
* The index of the last successfully processed record of the file is
* always written to the table EDFI2.
* If the program is startet again for this file, the table EDFI2 will
* be interpreted and the processing will start at the next record.
* PARAMETERS
PARAMETERS:
* directory + name of file that has to be processed
P_FILE LIKE EDI_PATH-PTHNAM DEFAULT '/usr/sap/.../SYS/global/...'.
* DATA
DATA:
G_MESSAGE_FIELDS LIKE EDIMESSAGE.
* MAIN PROGRAM
START-OF-SELECTION.
* do inbound processing from file
CALL FUNCTION 'IDOC_INBOUND_FROM_FILE'
       EXPORTING
            FILE_NAME            = P_FILE
       EXCEPTIONS
            FILE_OPEN_FAILED     = 1
            MARKER_TO_BE_DELETED = 2
            READ_FILE_FAILED     = 3
            IDOC_NOT_STORED      = 4
            FILE_DELETE_FAILED   = 5
            MARKER_MODIFY_FAILED = 6
            EVENT_CREATE_FAILED = 7
            FIRST_RECORD_INVALID = 8
            INVALID_RECORD       = 9
            OTHERS               = 10.
IF SY-SUBRC 0.
* fill message fields for exception handling from system fields
    MOVE-CORRESPONDING SY TO G_MESSAGE_FIELDS.
* error handling using the 3.0 business workflow
    CALL FUNCTION 'IDOC_ERROR_WORKFLOW_START'
         EXPORTING
              DOCNUM                  = 0
              EVENTCODE               = 'EDIM'
              MESS                    = G_MESSAGE_FIELDS
         EXCEPTIONS
              NO_ENTRY_IN_TEDE5       = 0
              ERROR_IN_START_WORKFLOW = 0
              OTHERS                  = 0.
* do not care for exceptions here
    COMMIT WORK.
* abend message for RFC
    MESSAGE ID     G_MESSAGE_FIELDS-MSGID
            TYPE   'A'
            NUMBER G_MESSAGE_FIELDS-MSGNO
            WITH   G_MESSAGE_FIELDS-MSGV1 G_MESSAGE_FIELDS-MSGV2
                   G_MESSAGE_FIELDS-MSGV3 G_MESSAGE_FIELDS-MSGV4.
ENDIF.
* end of report
there are some function modules to accomplish this.
IDOCS_OUTPUT_IN_XML_FORMAT
IDOCS_OUTPUT_VIA_XML_HTTP
for inbound processing,
IDOC_INBOUND_XML_SOAP_HTTP
IDOC_INBOUND_XML_VIA_HTTP
IDOC_XML_FROM_FILE
IDOC Adaptor,
IDX_IDOC_TO_XML
Extended table maintenance, to display IDOC in XML format with XSL,
IDOC_XML_DISPLAY
IDOC_XML_TRANSFORM

How to Convert XML to IDoc

Hi,
Is there any way r by any means i can communicate and receive data from a .Net application which posts data in XML Format to SAP Server and without changing the functionality of the .Net application XMl Format, still maintaining the IDoc Format to the SAP Server. And Viceversa.
Suggestion for this will be much appreciated
Thanks & Regards

hi
there are some function modules to accomplish this.
IDOCS_OUTPUT_IN_XML_FORMAT
IDOCS_OUTPUT_VIA_XML_HTTP
for inbound processing,
IDOC_INBOUND_XML_SOAP_HTTP
IDOC_INBOUND_XML_VIA_HTTP
IDOC_XML_FROM_FILE
IDOC Adaptor,
IDX_IDOC_TO_XML
Extended table maintenance, to display IDOC in XML format with XSL,
IDOC_XML_DISPLAY
IDOC_XML_TRANSFORM
hope this helps,
regards,
ak
PS: Do reward useful answers.

HTTP Adaptor

Hi all,
I knw dat reciever idoc adaptor supports aknowledgement
even when not requested by sender . Doest it applies
for HTTP adaptor also.
                                    Regards,
                                    Pooja

Hi,
By default http adapter does not support any acknowledgement.but you can get i,e http 200 response. ie   It is kind of status/technical ack.
But if you want application acknowledgment , you need to go for Synchrnous call.
Regards,
Moorthy

Central PI Monitoring and Alerting in Solution manager

According to SAP AG documentation [White Paper|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/104677d9-fc8c-2e10-dc92-c4e660b0dd8c?quicklink=index&overridelayout=true] - the Solution Manager 7.1 onward provides a central PI monitoring for technical componnents and buisness alerts in a single dashboard.
My question is : does the ALE monitoring status also included in this monitor?
does the SAP PI IDoc adapter (ABAP Based) of PI 7.11 can be monitored there as well?

Hi,
As per the below help.com ALE/Interface monitoring still part of the Business process monitoring.
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/c7/42f64707c04207b1b17a610c436a34/content.htm
But again PI Idoc adaptor can be monitored using channel monitor of PI monitoring.
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/6a/b663dd510549d58456c38c5d2e0da0/content.htm
Please check,
Thanks,
Jansi

Conflict between 2 business services for the same SAP R/3 instance

Hi,
We developed a packaged solution that connects to SAP R/3 with RFC Adaptor and idoc Adaptor.
We deliver design and configuration packages defining the entire integration schema between an external system and SAP.
The configuration defines a business service BS_SAP_R3 containing RFC and idoc communications channels.
When we deploy and configure the solution (design and config) on a XI instance we have a conflict.
As the XI already contains a Business Service connecting to the same SAP instance (other integration) we want to use with our business service BS_SAP_R3, we have an error when configuring the Adapter-Specific Identifiers properties R/3 System ID and Client from the section IDoc Adapter and RFC Adapter with the message, for the BS_SAP_R3
Check Result for Object BS_SAP_R3
SAP system ID D46 and client 800 already exist in service | BC_TEST_SAP_R3 
Is there a way to solve this conflict problem?
Thanks for your help.
Adalbert

Dzieki za odpowiedz
Could you give more details about the design issue and what you have on mind?
I also suspect a design issue but do not know how to solve it...
If in your Configuration you have 150 Receivers Determinations, Interface Determinations and Receiver Agreements referencing the same BS business service to access SAP, can you make the service configurable in any sort
Can you recommend another solution?
The only solution I see it to regenerate all the configuration by hand using the already exiting SAP BS But for 150 objects it is not a real solution...
Thanks for your help
Adalbert
Wojtek

Scenarios in BPM

Guys,
I have posted in SDN regarding what all scenarios i have to practice to work in a real time project, i got a good response.....Thanks for all of them.
I have worked on File, Mail,JDBC,IDOC adaptors.
Worked on Message mapping.
Worked on File -file in BPM.
Let me know more areas to concentrate so that i can comfortably work in a real time project, i agree that while working we can learn more things.....
Kindly let me know different BPM scenarios to work and their links....
Cheers

Hi,
You concentrate on Proxies, Alerts,Webservices.
you can practice on the BPM Patterns which are under SAP BASIS Software component.
For proxies:
ABAP Server Proxies
ABAP Proxies in XI(Client Proxy)
Alerts
XI: Alerts - Step by step
The specified item was not found.
XI: Alerts - Troubleshooting guide
The specified item was not found.
Webservices
Webservice Calls From a User Defined Function.
Webservice Calls From a User Defined Function.
Testing XI exposed Web-Services
Testing XI exposed Web-Services
how to invoke webservice using NWDS and xi3.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5f3ee9d7-0901-0010-1096-f5b548ac1555
Invoke Webservices using SAPXI
Invoke Webservices using SAPXI
Exposing Remote Function Module as Web Service in XI - Step By Step
Exposing Remote Function Module as Web Service in XI -    Step By Step
Invoking a WebService without External Definitions
Invoking a WebService without External Definitions
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
PI : Beef up the performance of synchronous webservices
PI : Beef up the performance of synchronous webservices
XI : WebService Studio - A Plain Jane SOAP Tool
XI : WebService Studio - A Plain Jane SOAP Tool
XI : How To publish WSDL generated from XI to UDDI
XI : How To publish WSDL generated from XI to UDDI
For BPM Patterns.......
RFC Scenario using BPM --Starter Kit
The specified item was not found.
Schedule Your BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Walkthrough with BPM
Reconciliation of Messages in BPM
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
Thanks,
Madhu
Edited by: Madhu sudhan Reddy on Jul 31, 2008 1:01 PM
Edited by: Madhu sudhan Reddy on Jul 31, 2008 1:11 PM

Error is Receiver AS2 adaptor used for Idoc to AS2 scenario

Hello Experts,
   I am doing Idoc to AS2 B2B scenario where I am getting below error message in runtime workbench comm channel monitoring.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Sending failed.
Error type: COMPONENT_ERROR,NOT_TRANSMITTED >> Error date: 10/16/09 9:06 AM >> Description: AS2 Adapter failure Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:321)
AS2 Adapter failure
Processing task
Sending called.
Message processing started
Basis has already configured the AS2 Server with Certificates and provided me the below details for receiver agreement and those are put in Receiver agreement.
AS2 sender Configuration:
Authentication certificate à TRUSTEDAS2certAS2_datapool
AS2 Receiver Configuration:
Decryption Key à TRUSTEDAS2certXXXenterprise2008
Signing Key à TRUSTEDAS2certXXXenterprise2008
XXX is my receiver partner
For the Receiver party XXX I have maintained the Identifier as given below
*Agency----
Scheme-------Name*
http://sap.com/xi/XI--XIParty--
XXX
Seeburger----
AS2ID----
XXX_AS2ID
There is no need for sender agreement for Sender IDoc but still I tried to created R3 as sender party and R3 Business system, used it for the scenario and created sender agreement for sender Idoc but received same error message in Runtime workbench.
R2 system sender party is also set with identifier with AS2 ID.
MDN mode is set to no MDN in the receiver AS2 communication channel.
Please suggest me if something is missing or wrong in the configuration.
Thanks in advance.
Vinit

Hi Larry,
   The solution was very simple.
It was problem with the basic understanding of system and configuration.
Idoc is send sent by R3 ERP system and target is Partner Party. As ERP system is Business system and not the party w.r.t XI/PI terminology, we are not supposed to use Sender party as Sender ERP system but just use Business system as sender without any sender party. So in this way PI system could recognize that the data is coming from R3 system which is nothing but PI Business system.
Now question comes where to user the Serder Party which was defined with AS2 ID? So answer is in the receiver determination we have to mention the Sender party and sender service in the header mapping part (Also mention receiver party and service).
So in my case problem was with sernder party. I mentioned sender party in all receiver determination, Interface determination, Sender Agreement and receiver agreement where only sender service ie sender system was required. And as I configured my scenario without sender party it worked because PI could recognize the sender R3 system and AS2 ID was recognized form the Header mapping of Receiver Agreement.
Kindly let me know if it works and if you require snap shots of my configuration then I can send you the same.
Regards,
Vinit

IDOCs performance creation between SAP and SAP Java Adaptor

Hi,
We have a legacy systemt that send some IDOCs to SAP ECC through a SAP JAVA connector. Problem is that we send the idocs and we detected that we have some performance issues on the IDOC creation.
We are using the SAP standard code and SM58, SMQ1, SMQ2, traces, etc etc seem to be fine.
As per customer requirement we have to use process inmediately on the partner profile. We also set the mass processing option but no difference .
We have also other functionalities that run on IDOCs and they are running fine without any performance issue on it .
Could someone help us?
Thanks a lot, Sapera

Hello,
What kind of performance issue u have noticed?
Check if below idoc_aae tuning note helps u...
1641541 - IDoc_AAE Adapter performance tuning
Thanks
Amit Srivastava

Is there any way to send IDOC in one line through JMS Adaptor?

Hi Frnds,
I have an issue with JMS adaptor and it is as folllow:
I configured JMS sender Communicaiton Channel and its working fine but client wants header and item records in one line with out any lines in between these records. Is it possible to send Header and Item records in one line through JMS Sender?
Thanks
Rajeev.

Rajeev,
The XSL is generally created via an XML development tool and then imported to the design as an Imported Archive. Then in your Interface Mapping select a mapping program of type XSL and choose your XSL mapping.
FYI - Here is a simplified version of Michals blog.
I have created cdata.xml as input.
<?xml version="1.0" encoding="UTF-8"?>
<aa>
<bb>1</bb>
 <cc>1</cc>
 <cc>2</cc>
 <cc>3</cc>
</aa>
The XSL mapping program cdata.xsl
<?xml version="1.0"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:template match="/">
 <inside>

 <xsl:text disable-output-escaping="yes"><![CDATA[<![CDATA[]]></xsl:text>
 <xsl:copy-of select="aa"/>
 <xsl:text disable-output-escaping="yes"><![CDATA[]]]]></xsl:text>
 <xsl:text disable-output-escaping="yes"><![CDATA[>]]></xsl:text>

 </inside>
 </xsl:template>
</xsl:stylesheet>
And the result
<?xml version="1.0" encoding="UTF-8"?>
<inside><![CDATA[<aa><bb>1</bb><cc>1</cc><cc>2</cc><cc>3</cc></aa>]]></inside>
The strikethrough is an interpretation of the forum editor.
The actual result is square bracket <aa><bb>1</bb><cc>1</cc><cc>2</cc><cc>3</cc></aa> square bracket
Using the above code you can test this and see for yourself
The idea would to pass the single string to JMS.
This should get you over the line. Also refer to XI / PI help to clarify XSL mapping.
Regards,
Mike

Can a IDOC be used for data exchange from R/3 to CRM

Hi All,
First, can a IDOC be used for data exchange from R/3 to CRM
I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
To achive this can I use IDOC?
Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
Please respond immediately.
Regards,
Gopinath

IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
Hope this helps,
Kai

IDOC Adaptor Errot

Similar Messages

Maybe you are looking for