IDOC and BD87

Hello everybody
Is it possible to delete whole IDOC segment in DB87?
I can't find such possibility...
Ore maybe someone know different transaction, which allow to delete segment and read IDOC again, but not create new IDOC number (similar to WE19, but no new IDOC)
Best
Paweł

Hi,
Can try this using tcode we02 give your idoc number, select the segment you want to delete, click on page like icon beside the idoc segment, you will see the field name, field contents, short text, here from menu bar select Data record--->display- change.
Will enter into edit mode what you can do is just remove all values from this segment and save.
Then reprocess it.
I can see this one option for this situation.
Regards
vK

Similar Messages

Basic of IDOC and ALE

Hi All,
I am beginner of ALE IDOC.
Please tell me in details whats is Control Records, Data Records and Status Records in details.
Thnks in Advance,
awards will be given.
Ulhas

Hi,
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
u2022 Create a Customer Distribution Model (CDM);
u2022 Add appropriate message types and filters to the CDM;
u2022 Generate outbound partner profiles;
u2022 Distribute the CDM to the receiving systems; and
u2022 Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC u2013 Creating IDoc Type from Change Pointers
RSEOUT00 u2013 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for more information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Shiva Kumar

What are IDOC and ALE?

We are getting a new system that will be interfacing to SAP via IDOC and or ALE
I am required to quickly reply back as far as what will be required from a BASIS side if they will interface using IDOCS and ALEs
Thank YOU and kind Regards!
M.

Hi Maria,
Application Link Enabling (ALE) is a mechanism or u can say that it's a tool for the exchange of business data between loosely-coupled R/3 applications built by customers of SAP, the enterprise resource management program. ALE provides SAP customers with a program distribution model and technology that enables them to interconnect programs across various platforms and systems.That means that ALE can integrate business processes between R/3 Systems and non-R/3 systems as well as between R/3 Systems.
There are three layers in the ALE system:
a)     application services,
b)     distribution services, and
c)     communication services.
The vehicle for data transfer is called an IDoc (intermediate document), which is a container for the application data to be transmitted.
After a user performs an SAP transaction, one or more IDocs are generated in the sending database and passed to the ALE communication layer. The communication layer performs a Remote Function Call (RFC), using the port definition and RFC destination specified by the customer model. The IDoc is transmitted to the receiver, which may be an R/3, R/2, or some external system. If the data is distributed from a master system, the same transaction performed by the sender will be performed by the receiving system, using the information contained in the IDoc.
Changes made to fields in master data tables can be set to trigger distribution of the changes to slave systems, so that multiple database servers can update the same information simultaneously. IDocs carry information directly between SAP systems. In order to communicate with a non-SAP system, an IDoc is first transmitted to an intermediary system that translates the data to a format that will be understood by the receiver. Return data also passes through the translating system, where it is again encapsulated into an IDoc.
Now comes to ur 2nd query basis guys duties over IDOCS & ALE
a)Creating the RFC
b)monitoring different layers over ALE
c)Archiving IDOCS (when required)
d)use the Idoc display tool(we02)
e)use the Idoc Search tool (we09)
f)use the Status Monitor Tool(bd87)
g)Troubleshooting the Inbound Idocsu2026.
Regards,

What is IDOC and ALE?

Hi anybody,
         Please tell me what is IDOC and ALE? What pupose using IDOC and ALE?
          Give me Example sample code of using IDOC and ALE.
Thanks
S.Muthu.

Dear,
Here is some facts which will be helpful to clear yr concepts for ALE/IDOCs.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
ALE (Application Linking and Enabling)
Ale Technology is SAPs technology to support distributed yet integrated processes across several SAP systems.
Distributed Process:
A distributed process is one in which part of a business process is carried out on one system and part on another. The two systems would exchange data with each other at appropriate points to stay synchronized.
Need for Distributed Process:
Business in Different Geographical Locations.
Non availability of dedicated network.
Cultural and language differences in Geographical locations.
Running of Mission-critical Applications (Like Maintenance downtime etc.).
Separate up gradation of Modules.
Distributed SAP SYSTEM CHALLENGES
A system that understands the syntax and semantics of the data. It was important from the very beginning to base the distribution of data on business rules, not on database replication techniques.
Distributed systems that can maintain their autonomy while being integrated as one logical SAP system. The systems should be able to operate independently and support logical processing of transactions and data.
Distributed systems that can handle different data models. A local implementation should be able to customize the system to meet its local needs.
Receiving systems that can handle their own problems and not tie up the sending system.
Systems that maintain continued operation in spite of network failure. Changes made to either system should be synchronized after the network connection is restored.
A sound technology and methodology that can be used in all distribution scenarios.
SAP Distributed environment:
ALE allows for efficient and reliable communication between distributed processes across physically separate SAP systems.
ALE is based on application to application integration using messaging architecture. A message defines data that is exchanged between two processes. IDocs are containers that hold data exchanged between the two systems.
Benefits of ALE:
Integration with non-SAP systems: ALE architecture allows third party applications to integrate with SAP system.
Reliable Distribution: Once message type created and the receiver of the message is determined, ALE delivers the message to the recipient. If there is any network problem it will buffer the message and delivers the message once the network is restored. It also ensures that the message is not delivered twice.
Release Upgrade: Any of the distributed system can be upgraded to the new release of SAP without affecting the functionality. The ALE layer ensures backward compatibility of messages exchanged between systems.
ALE Architecture:
It consists of an Outbound process, an Inbound process, and an Exception Handling process.
Outbound Process:
ALE Outbound Process in SAP sends data to one or more SAP Systems. It involves four steps.
1. Identify the need of IDoc: This step starts upon creating a application document, can relate to a change to a master data object.
2. Generate the Master IDoc: The document or master data to be sent is read from the database and formatted into an IDoc format. This IDoc is called as a Master IDoc.
3. Generate the Communication IDoc: The ALE Service layer generates a separate IDoc from the Master IDoc for each recipient who is interested in the data. Separate IDocs are generated because each recipient might demand a different version or a subset of the Master IDoc. These recipient-specific IDocs are called Communication IDocs and are stored in the database.
4. Deliver the Communication IDoc: The IDoc is delivered to the recipients using an asynchronous communication method. This allows the sending system to continue its processing without having to wait for the destination system to receiver or process the IDoc.
Inbound Process:
The inbound process receives an IDoc and creates a document in the system.
1. Store the IDoc in the database: The IDoc is received from the sending system and stored in the database. Then the IDoc goes through a basic integrity check and syntax check.
2. Invoke the Posting Module: The control information in the IDoc and configuration tables are read to determine the posting program. The IDoc is then transferred to its posting program.
3. Create the Document: The posting program reads the IDoc data and then creates a document in the system. The results are logged in the IDoc.
IDoc Types:
IDoc type structure can consist of several segments, and each segment can consist of several data fields. The IDoc structure defines the syntax of the data by specifying a list of permitted segments and arrangement of the segments. Segments define a set of fields and their format.
An IDoc is an instance of an IDoc Type and consists of three types of records.
i. One Control record: each IDoc has only one control record. The control record contains all the control information about an IDoc, including the IDoc number, the sender and recipient information, and information such as the message type it represents and IDoc type. The control record structure is same for all IDocs.
ii. One or Many Data records: An IDoc can have multiple data records, as defined by the IDoc structure. Segments translate into data records, which store application data, such as purchase order header information and purchase order detail lines.
iii. One or Many Status records: An IDoc can have multiple status records. Status record helps to determine whether an IDoc has any error.
Message in IDoc Type:
A Message represents a specific type of document transmitted between two partners.
Outbound Process in IDocs:
Outbound process used the following components to generate an IDoc. A customer model, and IDoc structure, selection programs, filter objects, conversion rules, a port definition, an RFC destination, a partner profile, service programs, and configuration tables.
The Customer Model:
A customer model is used to model a distribution scenario. In a customer model, you identify the systems involved in a distribution scenario and the message exchanged between the systems.
Message control:
Message control is a cross application technology used in pricing, account determination, material determination, and output determination. The output determination technique of Message control triggers the ALE for a business document. Message control separates the logic of generating IDocs from the
application logic.
Change Pointers:
The change pointers technique is based on the change document technique, which tracks changes made to key documents in SAP, such as the material master, customer master and sales order.
Changes made to a document are recorded in the change document header table CDHDR, and additional change pointers are written in the BDCP table for the changes relevant to ALE.
IDoc Structure:
A message is defined for data that is exchanged between two systems. The message type is based on one or more IDoc structures.
Selection Program:
Is typically implemented as function modules, are designed to extract application data and create a master IDoc. A selection program exists for each message type. A selection programs design depends on the triggering mechanism used in the process.
Filter Objects;
Filter Objects remove unwanted data for each recipient of the data basing on the recipients requirement.
Port Definition:
A port is used in an outbound process to define the medium in which documents are transferred to the destination system. ALE used a Transactional RFC port, which transfers data in memory buffers.
RFC Destination:
The RFC destination is a logical name used to define the characteristics of a communication link to a remote system on which a function needs to be executed.
Partner Profile:
A partner profile specifies the components used in an outbound process(logical name of the remote SAP system, IDoc Type, message type, TRFC port), an IDocs packet size, the mode in which the process sends an IDoc (batch versus immediate), and the person to be notified in case of error.
Service Programs and Configuration Tables:
The outbound process, being asynchronous, is essentially a sequence of several processes that work together. SAP provides service programs and configuration tables to link these programs and provide customizing options for an outbound process.
Process flow for Distributing Transactional Data:
Transactional data is distributed using two techniques: with Message control and without message control.
Process flow for Distributing Master Data:
Master data between SAP systems is distributed using two techniques: Stand alone Programs and Change Pointers.
Triggering the Outbound Process via Stand-Alone Programs:
Stand-Alone programs are started explicitly by a user to transmit data from one SAP system to another. Standard Programs for several master data objects exist in SAP. Ex. The material master data can be transferred using the RBDSEMAT program or transaction BD10.
The stand-alone programs provide a selection screen to specify the objects to be transferred and the receiving system. After the stand-alone program is executed, it calls the IDoc selection program with the specified parameters.
Triggering the Outbound Process via Change Pointers:
The change pointer technique is used to initiate the outbound process automatically when master data is created or changed.
A standard program, RBDMIDOC, is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process for distributing the master data to the appropriate destination. The RBDMIDOC program reads the table TBDME to determine the IDoc selection program for a message type.
Processing in the Application Layer:
The customer distribution model is consulted to make sure that a receiver has been defined for the message to be transmitted. If not, processing ends. If at least one receiver exists, the IDoc selection program reads the master data object from the database and creates a master IDoc from it. The master IDoc is stored in memory. The program then calls the ALE service layer by using the function module MASTER_IDOC_DISTRIBUTE, passing the master IDoc and the receiver information.
Processing in the ALE Interface Layer:
Processing in the ALE Layer consists of the following steps:
Receiver Determination: The determination of the receiver is done through Customer Distribution Model.
IDoc Filtering: if an IDoc filter is specified in the distribution model for a receiver, values in the filter are compared against the values in the IDoc data records. If a data record does not meet the filter criteria, it is dropped.
Segment Filtering: For each sender and receiver combination, a set of segments that are not required can be filtered out.
Field conversion: Field values in data records are converted by using the conversion rules specified for the segment.
Version change for segments: Segments are version-controlled. A new version of a segment always contains fields from the preceding version and fields added for the new version. Release in IDoc type field of the partner profile to determine the version of the segment to be generated.
Version change for IDocs: IDocs are also version controlled. The version is determined from the Basic Type field of the partner profile.
Communication IDocs generated: The final IDoc generated for a receiver after all the conversions and filtering operations is the communication IDoc. One master IDoc can have multiple communication IDocs depending on the number of receivers identified and the filter operations performed. IDoc gets the status record with a status code of 01 (IDoc Created).
Syntax check performed: IDoc goes through a syntax check and data integrity validation. If errors found the IDoc get the status of 26 (error during syntax check of IDoc Outbound). If no errors found the IDoc gets the status 30 (IDoc ready for dispatch ALE Service).
IDoc dispatched to the communication Layer: In the ALE process, IDocs are dispatched using the asynchronous RFC method, which means that the sending system does not await for data to be received or processed on the destination system. After IDocs have been transferred to the communication layer, they get a status code 01 (Data Passed to Port OK).
Processing in the Communication Layer:
To dispatch an IDoc to a destination system, the system reads the port definition specified in the partner profile to determine the destination system, which is then used to read the RFC destination. The RFC destination contains communication settings to log o to the remote SAP system. The sending system calls the INBOUND_IDOC_PROCESS function module asynchronously on the destination system and passes the IDoc data via the memory buffers.
Inbound Process in IDocs:
An inbound process used IDoc structure, posting programs, filter objects, conversion rules, a partner profile, service programs, and configuration tables to post an application document from an IDoc.
Posting Program:
Posting programs, which are implemented as function modules, read data from an IDoc and create an application document from it. A posting program exists for each message. Each posting program is assigned a process code. A process code can point to a function module or a work flow. In the standard program process codes always point to a function module.
Ex. The posting program for message type MATMAS is IDOC_INPUT_MATMAS which has a process code MATM.
Workflow:
A workflow represents a sequence of customized steps to be carried out for a process. The workflow management system is used to model the sequence, identify information required to carry out the steps and identify the person responsible for the dialog steps.
Partner Profile;
A partner profile specifies the components used in an inbound process (partner number, message type, and process code), the mode in which IDocs are processed (batch versus immediate), and the person to be notified in case of errors.
Process flow for the Inbound process via a Function Module:
In this process, IDocs are received from another system and passed to the posting function module directly.
1. Processing in the communication Layer:
The IDOC_INBOUND_ASYCHRONOUS program, triggered as a result of an RFC from the sending system, acts as the entry point for all inbound ALE processes. The IDoc to be processed is passed as an input parameter. Control is transferred to the ALE/EDI layer.
2. Processing in the ALE/EDI Interface Layer:
Basic integrity check: A basic integrity check is performed on the control record.
Segment Filtering and conversion: Filtering out unwanted segments and carry out any required conversion of field values.
Creation of Application IDoc: The application IDoc is created and stored in the database and a syntax check is performed. If there are errors it gets status code of 60 (Error during Syntax check of IDoc Inbound). At this point a tangible IDoc, which can be monitored via one of the monitoring transactions, is created and the IDoc gets status code 50 (IDoc Added).
IDoc Marked ready for Dispatch: IDoc gets the status code 64 (IDoc ready to be passed to application).
IDoc is passed to the posting program: The partner profile table is read. If the value of the Processing field is set to Process Immediately, the IDoc is passed to the posting program immediately using the program RBDAPP01.
3. Processing in the Posting Module:
The process code in the partner profile points to a posting module for the specific message in the IDoc. The posting program implemented as a function module either calls a standard SAP transaction by using the Call Transaction command for posting the document or invokes a direct input function module.
The results of execution are passed back via the function modules output parameters. If the posting is successful IDoc gets the status code 53 (Application Document Posted) or it gets status code 51 (Error: Application
How to create idoc?
*WE30 - you can create a IDOC type
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
This report creates IDocs from the change pointers for the specified message type. It then sends them to the receiving system and flags the change pointers as processed in respect of the specified message type.
The receiving systems for the specified message type are determined from the customer distribution model.
Output:-The report outputs information about the number of master IDocs and communication IDocs created.
RSEOUT00 Process all selected IDocs (EDI) Report for generation of files for EDI outbound processing.The report processes the IDocs available in the system with the status 'to be processed'. The IDocs are selected according to the selection options and parameters specified.
It is important that you make sure that only test messages or productive messages are selected.
The IDocs are processed in various files for various output modes and for various ports. The names of the files are created according to the naming definition for the outbound file. This definition is determined in the port definition.
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
For testing you can use WE19.
Hope This will be helpful,
Best Regards ,
P Singh

Transfer (IDocs and TRFC): Missing messages or warnings

Hi,
While loading data from ECC to BI, I'm getting the following Error. It is for all DataSources...even for Full loads with 15 records also.
Requests (messages): Everything OK
Extraction (messages): Missing messages
-->Missing message: Request received
-->Missing message: Number of sent records
-->Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Request IDoc : Application document posted
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
Processing (data packet): Everything OK
Data Package 1 ( 10 Records ) : Everything OK
Note: I tried with following options, so please don't repeate again.
1. No LUWS in ECC in SM58.
2. Connections are OK an dtested in SM59.
3. WE20 is also OK.
4. Job Finished successfully in ECC.
5. No Dumps in ST22 in ECC.
6. Dumps in BW in ST22.
Error Message is:
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSSM" or "LRSSMU36"
"RSSM_OLTPSOURCE_SELECTIONS"
7. Tried with BD87 in ECC and BI also.
Thanks
Ganga

Hi,
Every thing is fine. And I searched for OSS note and I found some notes but I'm unable to resolve it. My data Target is Cube and DSO's.
Note 852443 - Dump in include LRSSMU36 RSSM_OLTPSOURCE_SELECTIONS
Note 869628 - Constant WAITUPDA in SMQ1 and performance optimization
Note 901878 - Information IDoc Sent, but did not arrive
Note 913330 - tRFC LUWs are not created
Thanks
Ganga

Is it possible to change an IDOC and save on the same IDOC number..?

Hi all,
I have an IDOC. When I processed the IDOC, it ended up with error status '51'. There was some problem with the data. So, I changed the data and reprocessed using the T-Code 'WE19' and it was processed successfully. When we reprocess the IDOC using 'WE19', it generates another IDOC number. But, the client is asking that, it should not generate another IDOC number. When we change the IDOC number, it should be saved under the same(ORIGINAL) IDOC number. Is it possible to change an IDOC and save under the same number..? Is there any transaction code to do so. Please give your valuable inputs.
Thanks in advance.
Thanks & regards,
Paddu.

Hi,
You can use the transaction WE09..to edit the IDOC data...
Then use the transaction BD87 to post the IDOC..
Thanks
Naren

Editing an Outbound Idoc and resending

Hello all,
I have looked but can't find the answer to my questions.
I have an outbound idoc (invoice) - I have used BD87 to edit the idoc. the idoc is now in a status of 32.
How do I resend this idoc?
when I hit process I am taken to a screen showing me
Idoc |Old Status|New Staus|Status Text |Error Text
5917058 |32 | |Doc was edited |Changed data record was saved
How do I resend the edited idoc?
I know the answer is simple - I just don't see it.
Thanks
Edited by: Helen Wadino on Nov 11, 2008 3:57 PM

I believe you created a new idoc num with the BD87 after editing. The old idoc num is still there and probably failed. Did you try re-submitting the new stat 32 idoc in BD87?
Or, you may want change the status of the idoc:
PARAMETERS: docnum like edidc-docnum.
update edids set status = '30' where docnum eq docnum and status eq '03'.
Edited by: Tom M. on Nov 11, 2008 4:00 PM
Edited by: Tom M. on Nov 11, 2008 4:01 PM
Edited by: Tom M. on Nov 11, 2008 4:07 PM

Transfer (IDocs and TRFC ) Missing Messages

Hi,
I have taken INIT load and records were loaded successfully in the target system.Now when i run delta , the status goes Green but 0 records are loaded ,and also there is error as :
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Everything OK
Data request received
Data selection scheduled
No data available, data selection ended
Transfer (IDocs and TRFC): Missing messages
Processing (data packet): No data
Subseq. processing (messages) : No errors
Process Chains : Everything OK
Other (messages): Everything OK
I have checked extractor in source system and it has records in it.
Edited by: Bhavna_m on Aug 26, 2011 12:57 PM

Hi,
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Thanks,
JituK

We19 and bd87

diff btwn we19 and bd87
could any one give an exaple in which senerios these r used ...
thanks in advance

WE19- Test Tool.
You can use the test tool to generate an IDoc manually and send the IDoc for either inbound or outbound processing. You are not restricted to a specific port type. You can start with an IDoc type (an empty IDoc) or use an old IDoc as a template and edit the IDoc, that is, add segments or change data. This is a good way to test new IDoc types, in particular.
You can forward your new IDoc for standard inbound processing (checking partner profiles and so on). You can also call a function module directly.
furthur u can go thru
<a href="http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b80f643d711d1893e0000e8323c4f/frameset.htm">Test Tool</a>
BD87- To re-process an IDOC to other system.
Regards.

What is the diffrence btween IDOC and BDOC?

what is the diffrence btween IDOC and BDOC?

Hi,
In short Idoc is an Intermediate Document and Bdoc is an Business Document.
Data can Be Transferd from Sap to Non Sap using Idoc where as we can transfer
data between sap to sap in Bdoc.
IDoc
IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions
BDOC
BDoc is a business document which is technically similar to an IDoc. BDocs are used to communicate data between two systems.
BDocs come in two types. One is the message BDoc (MBDoc) and the second is the Synchronizing BDoc (SBDoc).
MBDoc is used for replicating the data between SAP CRM and SAP R/3
SBDoc is used for replication and realignment between SAP CRM and mobile clients
som times SAP will be integrated with som other third party systems
ex SAP with BAAN here we should comunicate one to other systems
here we can integrate using EDI technology in this the formate of data will be in I DOCS EX :EDI is a bridge between 2 systems .I doc is a container to transfer data from one sys to other
this Idocs we can use in ALE technology also
BDoc is called Business Document,
BDoc represents data in a structural format. This sturctural architecture is use to either input data to system or send data to other system.
BDocs are data carrier that can either collected in system(Inbound) or can be send out of system(Outbound)
Please refer following link:
http://help.sap.com/saphelp_crm40sr1/helpdata/en/ec/8d7e3a7e760b55e10000000a114084/content.htm
Thanks,
Medha.

Idoc and message type not getting replicated in the receiver system

Hi
i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys B

Hi Tarang,
at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
Just look at standard IDocs and do as they do.
Regards,
Clemens

DIFFERENCE B/W IDOC AND RFC   ADAPTERS

HI FRIENDS,
WHAT IS THE DIFFERENCE B/W   IDOC AND RFC   ADAPTERS..? AND WHICH ONE IS
PREFERABLE TO USE    IN TRANSFERING DATA FROM THIRD-PARTY SYSTEM TO SAP.?
REGARDS,
RAMAKRISHNA.

Hi
These links will help you to understand :
http://help.sap.com/saphelp_nw04/helpdata/en/11/028417f9f8b24cbe1b0b398e1cb76a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Please dont forget to reward with points.
Edited by: Dheeraj Kumar on Mar 3, 2008 2:59 PM

How to trigger automatically an IDOC and RFC from SAP R/3 system?

Hi ,
lets say if we are implementing IDOC to FILE &RFC to FILE scenario ,how can we trigger on timely basis(schedules)
1)standard IDOCs and BAPIs?
2)customized Idocs and Customized Bapis?
3)Master Idocs and transactiona Idocs?I think we need to use change pointers for master Idocs and donno about Transactional Idocs.
please explain ,
thank you very much for your help.
regards,
Babu

sorryfor the late reply, I was busy with my work.thank you for your posts.
so all of you say just run the RSEOUT00 no matter what interface we use in XI like Master ,transactional Idocs,standard or customized BAPIs?
And I think we use RSNASTED if we have on recieving side right?
<b>then when we would use a report of format below to trigger an RFC,is this format for Asunc RFC ?</b>
REPORT Z_SEND_DATA_TO_XI.
parameters: dest like rfcdes-rfcdest default '(RFC Destination you defined in SM59)'.
<<your other variable declaration and ABAP Code here>>
call function 'ZXI_SEND_DATA'
in background task
destination dest
exporting
Name = John
City = Smith. (The values to pass to XI)
commit work.
<<Any Write statements or sy-subrc statements here>>
6) Save and Activate your ABAP program.
6) After all these steps, execute your ABAP Program to send the data to file via XI.

IDoc and creation of sales order!!

Hi,
I need to create sales order using IDoc and the file will have multiple line items for sales order and it has to be dynamic, so whats the best way to do this?
Regards
Gunjan

Hi
Check for the related IDOC types in EDBAS table and for related Message Types
in table EDMSG. take relavent one for your requirement and use.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Reward points if useful
Regards
Anji

Tax with the help of idoc and EDI

Dear gurus,
how can we process tax data that is used between two systems through the help of IDOC and EdI? It would be great for ur kind support.

Hi Amit,
I do not understand how a non-sap system having an idoc adapte?
Do you mean the non-sap system has the ability to understand the IDOC files?
If yes, then your scenario is typically a IDOC-to File scenario.
Read this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
If you do not intend to use XI in between, then you can just configure the outbound IDOCs in your SAP system and configure a file port in we21 transaction and create the partner profile in we20 transaction.
Regards,
Ravi

IDOC and BD87

Similar Messages

Maybe you are looking for