IDOC bad data transfer to XI

hi. I have a problem.
sender system send an IDOC to XI.
when I check the IDOC in WE02 found that one of fields of the idoc have a "#" (Torre B1 - B#Unimev). When XI recive the IDOC with XML format the "#" character is transformer to " "(Torre B1 - B Unimev). any ideas why it can be?
repeat, when i check in sxi_monitor> inbound message> payloads>MainDocument> I see <ZZAD_STREET_CO>Torre B1 - B Unimev</ZZAD_STREET_CO>.
Who must resolve it, R/3 team or XI??
another doubt i have is: who create XML document: R/3 or XI??
Thanks & Regards,
Rodrigo
Message was edited by: Rodrigo Pertierra

Hi Rodrigo,
I would ask your question in the XI forum (Exchange Infrastructure), and not in the SAP GUI forum.
Regards
Rolf

Similar Messages

IDoc/ALE Data Transfer-Scenario

Dear All,
I want to transfer data from Master/Header table(Client 1) to the ZTable(Client 2)
with the help of ALE plz suggest how.
Thanks,
RP

Hi RP,
I guess this is the wrong forum.
Try it elsewhere; i hope you will get a quicker response.
Regards Mario

How to load hierarchie with IDOC as data transfer method

hi ,this is balaji, i have doubt.
can any one please explain, how to up load hierarchies using IDOCs. If any material provided could be helpful.And also give me what are the pros and cons.
regards
balaji.p

HI Balaji,
Check out the following link to load hierarchies:
http://help.sap.com/saphelp_bw33/helpdata/en/fa/e92637c2cbf357e10000009b38f936/content.htm
regards

Badi to badi data transfer

Hello Friends,
I have implemented two Badi in migo transaction
1st badi is MB_MIGO_BADI
2nd is CACL_VALUE_CHANGE
the second badi returns batch classification characteristic value now i want to pass this value to my first badi and use the same for validation.
pls suggest how can i get the characteristic value in mb_migo_badi???
Regards,
Sunny

HI Sunny,
if the first BADI triggers after the second BADI.. why don't use the EXPORT and IMPORT parameters from the memory ID's..
Thanks!

Data transfer b/w SAP to Java using IDOC and Interface SAP Jco

Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector (Version 3.0.5)" we are planning to use. As per our understanding, from Java side one program needs to be written to connect with SAP as "Registered program". This registered program will appear in SAP GATEWAY automatically and using tRFC, TCP/IP connection both SAP and Java system will be connected.
In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
5. Any sample Java program for the SAP Jco version 3.0.5 to create the "Registered program" with SAP..? (e.g. SAP Listener program).?
If anybody has detailed steps or explanation please share it with us.
Thanks in advance
Warm Regards,
VEL

Hi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P

IDOC Data transfer

Hi Experts,
I have few questions related to IDOC Data transfer. I have two different SAP Systems S1 and S2, S1 Creates sales order and send the data through IDOC Type ORDERS05 to S2, To create sales order in S1.
As i know, Program IDOC_INPUT_ORDERS is used for I/B IDocs in S2. Will be there be any programs to push the data from S1 System.
Thank you
Kris

hi,
idoc is not meant for sending files to another system, they are basically data containers which are sent to other systems like to send the data related to sales orders you can send idoc ORDERS.
you need to first be clear with the requirement for which business object you want to transfer the data, then need to look out if the Idoc is available for the same then only u can sent it.
for more info on idocs you can easily search on forums.
Reg,
NJ

How does IDOC data transfer happensbetween two system?

Hi,
If there are data in system A and I need to transfer to system B using IDoc.
What are the key things which will enable data transfer from system A to system.
It would be great if someone can explain how does IDOC data gets transferred from system A to sytemB.
Regards,
Rachel
Moderator Message : Search for available information or Read SAP documentation. Thread locked
Edited by: Vinod Kumar on Apr 26, 2011 12:37 PM

thanks for all your replies...
let me write down what i have understood ..plz correct me if i have not followed properly..
1) Once IDocs successfully reach R3 , a function module specific to the Idoc type is called "<b>automatically</b>" and updates database...
2) this function module we specify in the process code while creating partner profiles
basically all we need to do is to specify correct function module, right?
the rest of the process ie . updation in the tables(database) is done automatically..
Once database is updated, where can i see the added/updated records in database?
also how do we find this function module?
I am using MATMAS05...
Regards,
Roshani

Data transfer between SAP & Java and Vice versa using IDOC Process

Dear Experts,
        We are working on one of the good requirement related to data transfer between SAP and Java software. Client requirement is, they want to transfer the data in both the ways (from SAP --> Java and Vice versa also).
In detail is, after sales order creation using one custom program loading plan details will be calculated. Once loading dates are confirmed then, user will release the sales document to transfer the data from SAP to Java using "Outbound IDOC processing". Similarly in that JAVA software some shipment details will be performed, once completed from JAVA software again details needs to be pumped back to SAP as "Inbound IDOC Processing".
For this fields are already identified from external software SAP and we are looking for the same to perform the steps in SAP.
At this stage, I need your expert opinion / feedback how to go about at this stage.
Meaning,
                 1. What are the customizing steps needs to be done in SAP..?
                 2. How to trigger the :Outbound IDOC process" once the documents are "Released" from custom transaction
                 3. How to create the link between SAP and JAVA to transfer the data between these 2 software
                 4. How to trigger the "Inbound IDOC Process" from JAVA software to SAP and how to store the data in SAP
Experts, please give your feedback in terms of reply or by sending the step by step process to fulfill this client requirement.
Thanks for your cooperation.
Regards,
Ramesh

Maybe too many open questions in the same document.
Maybe you should repost a more specific question in a technical forum.
This looks like a small project where you already know what you want, maybe you should contract a technical specialist so he proceeds to the implementation!

Data transfer with IDoc

Hi All,
Can any one please explain me about "Data transfer with IDoc".

Dear Prasad,
Using the IDoc option , you will not have a staging in BW like PSA were you can do corrections if required,
We can use IDOC option when we are very sure that data we are loading is error free,
and in older versions we are forced to use only IDOC option when doing hierarchy loads and its ruled out now,
Data transfer with IDoc
The data is packed into IDocs by the source system and sent to the Business Information Warehouse. In BW your data is saved persistently and intransparently in the IDoc store. From there the IDocs can be updated in the IDocs manually or automatically.
It is used for hierarchies load Limitations with IDoc is:
transfer structure must not have more than 1000 Bytes in the character format.
If it is a critical data we can use IDocs it can't be modified here. In case the load fails we need to load data from source system.
http://help.sap.com/saphelp_nw04/helpdata/en/7d/724d3caa70ea6fe10000000a114084/frameset.htm
Hope this helps u..
Best Regards,
VVenkat.
Edited by: Venkata Narayana Jakkampudi on Dec 23, 2008 12:03 PM

IDOC data transfer SAP to Java using SAP JCo

Dear Experts,
The challenging requirement we are having is, we need to create the interface for data transfer between SAP system and the Java system. The data will be transferred from SAP to java and similarly once some processing done in Java again the details needs to be transferred from Java to SAP.
For this data transferred we are planning to use IDOC process and for interface "SAP Java connector" we are planning to use. In this case we are having some doubts.
1. The data from SAP is going to be transfered from one Custom transaction (Z tcode). Once "Outbound IDOC" will get triggered and will carry the details. Now the doubt is, whether the data / details will get transfered to JAVA system automatically or we need to perform any other steps from SAP ABAP coding...(like converting in to flat file, XML file and etc) ??
2. We are planning to install "SAP Jco" in Java server. Is this correct...??
3. Other than SAP Jco any other softwares needs to be installed or not..??
4. Since we are going to trigger the "outbound IDOC" from custom transaction, we are planning to develope one program in SE37. Other than this any other program we need to develop or not..??
If anybody has detailed steps or explanation please share it with us.
Warm Regards,
VEL

Hi All,
For the above mentioned issue, we implemented JCo software in JAVA system and created the JAVA program including SAP logon credential details like Client, User name, password and Language details.
When this JAVA program was compiled successfully then, that non SAP system will appear in SAP gateway Tcode.
Once non SAP system started appearing in SAP gateway that means, both SAP & Non SAP are connected automatically.
Regards,
Velmurugan P

Data Transfer using LSMW IDOC processing with multiple segments

we need to post the document data (Header structure, BP item structure, G/L item structure..etc) using LSMW IDOC processing.
is it possible to transfer data for all these structures (Segments) in single file?

Thanks for the reply.
I am assuming when we are specifying the file in LSMW we are going to give the option to generate the file with include all structures.
could you please elaborate further is there any thing specific we need to do while configuring LSMW to get the file for all segments in the IDOC with field names which we are going to populate with data, so that we can use it for data transfer.
any help document will be helpful.

Creat Job for LSMW (periodical data transfer)- idoc BLAORD

Hi,
We are trying to create job for LSMW (thru frame program for periodic data transfer) for idoc BLAORD (Purchasing contract)
When I am running the job that I created, the job is cancelled and the error is:
"Upload from front-end is not possible in batch mode.
Message no. /SAPDMC/LSMW_OBJ_070 020"
How can I correct that? so I will be able to run a job (the job mast run background?)
Thanks,
Tal Sasson

Hello,
I was also receiving the same message /SAPDMC/LSMW_OBJ_070 020 even though I specified in /SAPDMC/SAP_LSMW_INTERFACE the server path. The problem was that in LSMW->Specify Files you have to delete the definition of front-end files and define application server files.
That Flag File (Path and Name) (field /SAPDMC/LSOINP-FILENAME in program /SAPDMC/SAP_LSMW_INTERFACE) is kind of useless since it is ignored anyway and files defined in LSMW object are imported and they have to be read anyway if you use more than one file.
Regards,
Peter

IDoc based asychronus data transfer

Hello Experts,
IDoc based asynchronus data transfer from a non-SAP application to BW is required to be set up.
I understand that SOAP based XML data transfer will achieve the same goal - however our requirement is to use IDocs. It would essentially be a push type of extractor sending data to BW asynchronusly.
Has anyone tried this before? Please share your experiance/ideas.
Thanks,
Yogesh
Message was edited by: Yogesh Baviskar

you will have the option when you create the infocube. select "Data transfer wth Direct Access" option. Then you create the DTP by giving the data source details.Once you have created the DTP, right lick on cube and select activate direct access.

Mac Pro & Powerbook data transfer / what about bad blocks

Hello,
Well i have Mac Pro and a old Powerbook G4. Both are running OSX (one intel version and the other PPC). the powerbook is booting from an external firewire drive which i have installed OSX (PPC) on. ( mainly because the internal drive of the laptop died).
So I want to transfer some data from the external drive to my Mac Pro. Is it okay just to shutdown the Powerbook, and connect it & mount it on the Mac Pro as an external drive? (not the actual Powerbook, just the external drive itself...) Will there be complications since it has OSX (PPC) installed? I want to transfer some files of the external to my Mac Pro.
(...I know another option would be to network them together too.....)
I am not trying to boot from it...
another quick question....
The external drive with OSX (PPC) installed, has had a shady history, it has crashed a few times on me, bad blocks, sometimes a click here and there...it been partioned a few times....etc..
When I transfer data or files from the bad drive to my good one, could it possibly transfer those bad data blocks to the other hard drive on my Mac Pro, and possibly "infect" it?

The following may help you:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
/Home/Library/Preferences/ copy any preferences needed for third-party applications
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to another forum user for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.

ALE data transfer in E-recruiting

hi All,
We are Implementing E-recruitment in HCM.
            I have following 2 requirements
Case 1). Distribute data of infotypes 0000,0001,0002,0006,0022,0023,,0024,1000 and 1001 into ER(E-recruiting) from my HCM (ECC) system. This i have achieved using message type HRMD_A and setting up ALE as per standard guidelines.
Case 2) i have to transfer Candidate data which gets created in E-recruitment server back into HCM(ECC) server(reverse of case 1) and stored them in infotypes 0000,0001,0002,0006,0022,0023 and 0024. How this can be achieved ??
is there any standard way i mean IMG configuration or ALE setup to transfer this data back into HCM (ESS) server?? or any BAdis or BAPIss??
    kindly suggest me some solution if anyone of you have encountered the same situation in past. The final solution i m thinking is of creating custom basic IDOC type, message type and custom programs for inbound and outbound processing but before doing this i just wan to have a confirmation that there is no standard way of doing this...
Thanks in advance..

Hi.
     There is a standard activity in e-Recruiting "Data Transfer for New Employee" which transfer the Candidate data from e-Recruiting to HCM system in temprary table T752F. when you hire this candidate from PA48 all transfer data will get stored in respective Infotype of SAP HCM system..
Thanks,
Madhu

IDOC bad data transfer to XI

Similar Messages

Maybe you are looking for