Idoc/BAPI for Certificate Profile creation

Hi,
Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code  QC01).
Appreciate your Inputs.
Thanks.
Regards,
Pc

BAPI_USER_PROFILES_ASSIGN  Change User-Profile Assignments
SUSR_BAPI_USER_PROFILES_ASSIGN  Methods of object USER
Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

Similar Messages

  • IDOC/BAPI for Production order creation from Legacy system

    Hi all
    We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
    thanks a bunch

    Hi John,
    For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
    If there is an inbound IDoc available, I would recommend to use an IDoc.
    IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
    BAPI is also good approach to use and fast in term of  processing.
    For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
    Hope this will help.
    Regards,
    Ferry Lianto

  • IDoc Configuration for Production Order Creation and Change

    Hi All,
    Please Help me out for IDoc Configuration for Production Order Creation and Change
    I have found the IDoc for Production Order
    Messgae Type : LOIPRO and IDoc type : LOIPRO01
    Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
    I have done following Configurations:
    1. RFC Destination created for XI system
    2. PORT was created for XI
    3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
    I need to know how to do the followning.
    1. How do i configure the outbound Production order idocs when Production Order is created or changed.
    2. in NACE (Output control) which is the Application for Production Order.
    3. How can I set IDoc as output Type for Production Order Creation.
    Thanks in advance
    Dhanabal T

    Hi Michal,
    I know that it is the old thread but still want to get clarified from you out of curiosity.
    Unlike other IDOC, i actiavated change pointers for LOIPRO
    1.message and idoc type is linked
    2.function module , message type , idoc type is linked
    function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
    3.BD64, distribution model is created and distributed
    4. port and partner profile is in place.
    5. IDOC is not getting generated after creating the process order.
    do we need to activate the change documents for the message type in BD52,
    if yes can you please provide the object types for the same.
    or i am missing something else. please guide me in this regards.
    Thanks in advance for your time.
    S.Janagar

  • Can u tell me any predefined BAPI for change and creation of Material

    Hi,
        Can anybody tell me  predefined BAPI for change and creation of Materialmasterand Pricing?
    Thanks & regards,
    Gopianne.

    you can use the BAPI to BAPI_MATERIAL_SAVEDATA create as well as to change material master.
    When changing material master data, you need enter only the material
    number.
    In the header data, you must select at least one view for which data is
    to be created. Depending on the view selected, you must maintain other
    required parameters. If you do not enter values for all of the required
    parameters, the method is ended with an error message.
    The corresponding fields in the tables (such as CLIENTDATA) must first
    be supplied with data by the calling program. An indicator must also be
    set for each of these fields so that the data is written to the database
    by the method. This requires the calling program to supply the
    corresponding field with the indicator in a checkbox table (for example,
    CLIENTDATAX). Checkbox tables exist for tables that do not contain any
    language-dependent texts (MAKT, MLTX), International Article Numbers
    (MEAN), or tax classifications (MLAN). Several data records for a
    material can be created in these tables.
    regards
    vivek
    reward points if it helps

  • BAPI for Outbound Delivery Creation with reference to Sales Order

    Dear all,
    I'm on R/3 4.6B platform and to develop an RFC for outbound Delivery creation instead of using the standard VL01N transaction.
    I've review BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N thread which suggest BAPI_DELIVERYPROCESSING_EXEC .
    However, in 4.6B, that function module doesn't exist. Appreciate any suggestion and or workaround.
    Thanks.
    Steven
    Edited by: Steven Khoo on Mar 25, 2010 7:13 AM
    Edited by: Steven Khoo on Mar 25, 2010 7:14 AM

    Not required anymore

  • BAPI for Service order creation

    Hi ,
    Please tell me if any Bapi for service order creation  , T-code : IW31
    regards,
    Prakash

    Hi Prakash,
    Have a look on the following BAPIs:
    BAPI_ISUSMORDER_CREATEMULTIPLE - Create Service Orders
    BAPI_ALM_CONF_CREATE - Create confirmation for maintenance/service order
    WTY04_CREATE_SERVICE_ORDER - Create Service order via function module.
    Hope this will help.
    Regards,
    Nitin.

  • Is there any Bapi for Physical Sample creation

    Hi Folks,
    Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a  physical sample......
    Any ideas or suggestions would be appreciated..
    thanks
    chaithanya.

    HI Chaitanya,
    You can use : BAPI_BATCH_CREATE
    it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
    Regards,
    -Venkat.

  • IDOC/ BAPI for transaction FB60

    Hi Experts,
    Can anybody tell me IDOC/ BAPI for transaction FB60 for document type (KR = Original Invoice).
    Thanks

    Hi Venkata,
    Please refer below code, this works similar to FB60.
    REPORT z_bapi_test.
    *REPORT acc_bapi_test_document .
    SELECTION-SCREEN BEGIN OF BLOCK bl01 .
    PARAMETERS:
    check_l RADIOBUTTON GROUP rb1,
    check_a DEFAULT 'X' RADIOBUTTON GROUP rb1,
    post RADIOBUTTON GROUP rb1.
    SELECTION-SCREEN ULINE.
    PARAMETERS:
    rev_c RADIOBUTTON GROUP rb1,
    rev_p RADIOBUTTON GROUP rb1.
    SELECTION-SCREEN ULINE.
    PARAMETERS:
    ref_key LIKE bapiache01-obj_key DEFAULT 'TEST000001BAPICALL',
    dest LIKE bdi_logsys-logsys DEFAULT ' '.
    SELECTION-SCREEN END OF BLOCK bl01 .
    DATA:
    gd_documentheader LIKE bapiache09,
    gd_customercpd LIKE bapiacpa09,
    gd_fica_hd LIKE bapiaccahd,
    it_accountreceivable LIKE TABLE OF bapiacar09 WITH HEADER LINE,
    it_accountgl LIKE TABLE OF bapiacgl09 WITH HEADER LINE,
    it_accounttax LIKE TABLE OF bapiactx09 WITH HEADER LINE,
    it_criteria LIKE TABLE OF bapiackec9 WITH HEADER LINE,
    it_valuefield LIKE TABLE OF bapiackev9 WITH HEADER LINE,
    it_currencyamount LIKE TABLE OF bapiaccr09 WITH HEADER LINE,
    it_return LIKE TABLE OF bapiret2 WITH HEADER LINE,
    it_receivers LIKE TABLE OF bdi_logsys WITH HEADER LINE,
    it_fica_it LIKE TABLE OF bapiaccait WITH HEADER LINE,
    it_accountpayable LIKE TABLE OF bapiacap09 WITH HEADER LINE,
    it_paymentcard LIKE TABLE OF bapiacpc09 WITH HEADER LINE,
    it_ext LIKE TABLE OF bapiacextc WITH HEADER LINE.
    it_re LIKE TABLE OF bapiacre09 WITH HEADER LINE,
    it_ext2 LIKE TABLE OF bapiparex WITH HEADER LINE.
    PERFORM fill_internal_tables.
    IF check_l = 'X'.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
    DESTINATION dest
    EXPORTING
    documentheader = gd_documentheader
    customercpd = gd_customercpd
    contractheader = gd_fica_hd
    TABLES
    accountgl = it_accountgl
    accountreceivable = it_accountreceivable
    accountpayable = it_accountpayable
    accounttax = it_accounttax
    currencyamount = it_currencyamount
    criteria = it_criteria
    valuefield = it_valuefield
    extension1 = it_ext
    return = it_return
    paymentcard = it_paymentcard
    contractitem = it_fica_it.
    extension2 = it_ext2
    realestate = it_re.
    WRITE: / 'Result of check lines:'. "#EC NOTEXT
    PERFORM show_messages.
    ENDIF.
    IF check_a = 'X'.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
    DESTINATION dest
    EXPORTING
    documentheader = gd_documentheader
    customercpd = gd_customercpd
    contractheader = gd_fica_hd
    TABLES
    accountgl = it_accountgl
    accountreceivable = it_accountreceivable
    accountpayable = it_accountpayable
    accounttax = it_accounttax
    currencyamount = it_currencyamount
    criteria = it_criteria
    valuefield = it_valuefield
    extension1 = it_ext
    return = it_return
    paymentcard = it_paymentcard
    contractitem = it_fica_it.
    extension2 = it_ext2
    realestate = it_re.
    WRITE: / 'Result of check all:'. "#EC NOTEXT
    PERFORM show_messages.
    ENDIF.
    IF post = 'X'.
    DATA: l_type LIKE gd_documentheader-obj_type,
    l_key LIKE gd_documentheader-obj_key,
    l_sys LIKE gd_documentheader-obj_sys.
    IF dest = space OR
    dest = gd_documentheader-obj_sys.
    post synchron
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
    EXPORTING
    documentheader = gd_documentheader
    customercpd = gd_customercpd
    contractheader = gd_fica_hd
    IMPORTING
    obj_type = l_type
    obj_key = l_key
    obj_sys = l_sys
    TABLES
    accountgl = it_accountgl
    accountreceivable = it_accountreceivable
    accountpayable = it_accountpayable
    accounttax = it_accounttax
    currencyamount = it_currencyamount
    criteria = it_criteria
    valuefield = it_valuefield
    extension1 = it_ext
    return = it_return
    paymentcard = it_paymentcard
    contractitem = it_fica_it.
    extension2 = it_ext2
    realestate = it_re.
    WRITE: / 'Result of post:'. "#EC NOTEXT
    PERFORM show_messages.
    ELSE.
    create Idoc
    it_receivers-logsys = dest.
    APPEND it_receivers.
    CALL FUNCTION 'ALE_ACC_DOCUMENT_POST'
    EXPORTING
    documentheader = gd_documentheader
    customercpd = gd_customercpd
    contractheader = gd_fica_hd
    TABLES
    accountgl = it_accountgl
    accountreceivable = it_accountreceivable
    accountpayable = it_accountpayable
    accounttax = it_accounttax
    currencyamount = it_currencyamount
    criteria = it_criteria
    valuefield = it_valuefield
    extension1 = it_ext
    paymentcard = it_paymentcard
    contractitem = it_fica_it
    extension2 = it_ext2
    realestate = it_re
    receivers = it_receivers
    COMMUNICATION_DOCUMENTS* APPLICATION_OBJECTS EXCEPTIONS
    error_creating_idocs = 1
    OTHERS = 2 .
    IF sy-subrc = 0.
    WRITE: / 'IDoc created'. "#EC NOTEXT
    ELSE.
    WRITE: sy-msgid.
    ENDIF.
    ENDIF.
    ENDIF.
    IF rev_p = 'X' OR rev_c = 'X'.
    DATA: rev LIKE bapiacrev,
    rev_key LIKE ref_key.
    rev_key = ref_key.
    rev_key(1) = 'R'.
    rev-obj_type = gd_documentheader-obj_type.
    rev-obj_key = rev_key.
    rev-obj_sys = gd_documentheader-obj_sys.
    rev-obj_key_r = ref_key.
    IF rev_c IS INITIAL.
    IF dest = space OR
    dest = gd_documentheader-obj_sys.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_REV_POST'
    EXPORTING
    reversal = rev
    bus_act = gd_documentheader-bus_act
    TABLES
    return = it_return.
    ELSE.
    it_receivers-logsys = dest.
    APPEND it_receivers.
    CALL FUNCTION 'ALE_ACC_DOCUMENT_REV_POST'
    EXPORTING
    reversal = rev
    busact = gd_documentheader-bus_act
    OBJ_TYPE = 'BUS6035'
    SERIAL_ID = '0'
    TABLES
    receivers = it_receivers
    COMMUNICATION_DOCUMENTS* APPLICATION_OBJECTS EXCEPTIONS
    error_creating_idocs = 1
    OTHERS = 2
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ELSE.
    WRITE: / 'IDoc created'. "#EC NOTEXT
    ENDIF.
    ENDIF.
    ELSE.
    CALL FUNCTION 'BAPI_ACC_DOCUMENT_REV_CHECK'
    EXPORTING
    reversal = rev
    bus_act = gd_documentheader-bus_act
    TABLES
    return = it_return.
    ENDIF.
    WRITE: / 'Result of Reversal Posting:'. "#EC NOTEXT
    PERFORM show_messages.
    ENDIF.
    COMMIT WORK.
    Kindly close if it helps you.
    Regards
    Abhii...

  • Please Tell  me the Standard Bapi for Purchase Order Creation

    Hi,
      Please tell me the standard BApi for the PO creation. How to excute the standard Bapi. Please help me.
    Regrads
    Mohan

    Hi Mohan,
    Use this BAPI BAPI_PO_CREATE1.
    Check this post, you have program aswell
    https://forums.sdn.sap.com/click.jspa?searchID=7294168&messageID=1172796
    Regards,
    Satish

  • BAPI for delivery doc creation required

    Hi All,
    I need to develop a program wherein I need to create a sales order, delivery order, PGI(post goods issue) and invoice.......I have identified the bapi for sales order creation as bapi_sales_order_create..
    I request u to kindly help with the others....lemme know the relevant bapis for the others...

    Hi,
    Chk the FM's given below..Hope this will help you...
    BAPI For Delivery Order
    BAPI_DELIVERYPROCESSING_EXEC
    BAPI to post a Goods issue
    BAPI_OUTB_DELIVERY_CONFIRM_DEC "inbound Delivery
    Filling HEADEWR_DATA-DELIV_NUMB, HEADER_CONTROL-DELIV_NUMB, DELIVERY with the delivery number and HEADER_CONTROL-POST_GI_FLG with 'X' does the job.
    BAPI_OUTB_DELIVERY_CONFIRM_DEC " outboung Delivery
    Reward Points if helpful.
    Regards,
    Harini.S

  • FM or BAPI for Transfer Order creation in eWM

    Hello ALL,
    Please provide any FM or BAPI for Transfer Order creation in eWM. i know how to create transfer order in ERP.I tried to find out a FM or BAPI in SCM eWM but failes to get one.
    Kindly help.
    BR,
    Anil..

    Hi,
    Try using FM WS_LM_TRANSFER_ORDER_CREATE.
    I hope this is available in ur system
    Thanks

  • Background job fails for BDC profile creation and role assignment

    Hi Experts,
    I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
    Below is the process of job
       1. ZMIS_AUTH_OBJECT_CREATE
           Variant : auth-create
       2. ZMIS_AUTH_ASSIGN_TO_ROLE
           Variant : auth-assign
    The problem is in second program, runs in foreground but fails in background.
    Code which i have written in my second program
    ***BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message.
    ***Generation of Profile created
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14  .
    Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
    Regards,
    Chetan

    Hi Praveen,
    Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
    To achieve this i have written two programs
    1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
    "" Creation of Authorization Object
    CALL FUNCTION 'ZAUTHOBJ'
            EXPORTING
             ctu                    = 'X'
             mode                   = p_mode
             UPDATE                 = 'L'
    *   GROUP                  =
    *   USER                   =
    *   KEEP                   =
    *   HOLDDATE               =
             nodata                 = '/'
             g_authname_001         = 'ZDUMMY_MIS'
              g_targetauth_002       = wa_tab-auth
              g_authtxt_003          = wa_tab-short_desc
              g_authtxtmd_004        = wa_tab-med_desc
             marked_04_005          = 'X'
              g_authtxt_006          = wa_tab-short_desc
              g_authtxtmd_007        = wa_tab-med_desc
             tctiobjnm_04_008       = 'ZBUS_UNIT'
              g_authtxt_009          = wa_tab-short_desc
              g_authtxtmd_010        = wa_tab-med_desc
             marked_05_011          = ''
             opt_01_012             = 'EQ'
              low_01_013             = wa_tab-bu
              g_authtxt_014          = wa_tab-short_desc
              g_authtxtmd_015        = wa_tab-med_desc
             marked_04_016          = 'X'
              g_authtxt_017          = wa_tab-short_desc
              g_authtxtmd_018        = wa_tab-med_desc
             tctiobjnm_04_019       = 'ZCONTRCT'
              g_authtxt_020          = wa_tab-short_desc
              g_authtxtmd_021        = wa_tab-med_desc
             marked_05_022          = ''
             opt_01_023             = 'EQ'
              low_01_024             = lv_contract
              g_authtxt_025          = wa_tab-short_desc
              g_authtxtmd_026        = wa_tab-med_desc
              g_authtxt_027          = wa_tab-short_desc
              g_authtxtmd_028        = wa_tab-med_desc
              g_authname_029         = wa_tab-auth
    * IMPORTING
    *   SUBRC                  =
           TABLES
             messtab                = temp_message.
    "" Creation of role
    LOOP AT it_role INTO wa_role.
          CLEAR wa_text.
          wa_text-text = wa_role-desc.
          wa_text-langu = 'E'.
          APPEND wa_text TO it_text.
          wa_jobrole-agr_name = wa_role-role_name.
          wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
          wa_method-usmethod = 'CHANGE'.
          CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
            EXPORTING
              jobrole          = wa_jobrole
             parent           = wa_parentrole
             method           = wa_method
           TABLES
    *   RETURN           =
             shorttext     = it_text
    *   LONGTEXT         =
    *   MENU_NODES       =
    *   MENU_TEXTS       =.
        ENDLOOP.
    2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
      ""*BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message .
       COMMIT WORK AND WAIT.
    ""*Generation of Profile created
      LOOP AT it_role INTO wa_role.
        CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDLOOP.
    For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
    i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
    Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
    Regards,
    Chetan

  • BAPI for automatic Pr creation witth multiple files from excel sheet

    I have written a programm  for automatic PR creation  with the help of bapi , where its picks data from excel sheet and makes PR .It is picking excel files from one folder(Files) for PR creation and moving to another folder(Files sucess).
    now the problem is if Folder (Files) contains one excel sheet ,PR is created fine , but if the Folder(Files) have multiple excel sheet ,its is creating 1st PR right, but next PR's contains all the line item of 1st PR , 2nd PR and so on .can anyone suggest me where is the problem in codes.
    types : begin of x_file ,
            key1(10),
            pur_grp(4),
            maktx(40),
            plant(4) ,
            req(10),
            s_qty(13),
            wbs(24),
            gl(10),
            trackno(10),
            supl(4),
            deladd(255).
    types : end of x_file .
      data : str5 type char10.
      data : mm type char2.
      data : yyyy type char4.
      data : dd type char2.
      data : str9 type char10.
      data : str6 type char10.
      data : month type char2.
      data : year type char4.
      year = sy-datum+0(4).
      month = sy-datum+4(2).
      dd = sy-datum+6(2).
      yyyy = sy-datum+0(4).
      mm = sy-datum+4(2).
      dd = sy-datum+6(2).
      clear str6 .
      clear str5.
      concatenate  dd'.' month '.' year into str5 .
      concatenate  yyyy mm dd into str6 .
    DATA : file type rlgrap-filename .
    data : it_file type table of x_file .
    data : wa_file type x_file .
    data : it_header type table of x_file .
    data : wa_header type x_file .
    *&  Internal Table For Define Row and Coloum Postion
    data: col_start type i value 1 ,
          row_start type i value 2,
          col_end type i value 256 ,
          row_end type i value 65000 .
    *&  Internal Table For Retrieve  Data From Excel
    *data: excel_bdcdata like kcde_cells occurs 0 with header line.
    *data: excel_bdcdata1 like kcde_cells occurs 0 with header line.
    data: excel_bdcdata like ALSMEX_TABLINE occurs 0 with header line.
    data: excel_bdcdata1 like ALSMEX_TABLINE occurs 0 with header line.
    data: it_index type i.
    DATA : IT_INDEX1 TYPE I.
    *&  Define Field Symbol
    field-symbols: <fs> .
    data :   bdcdata like bdcdata    occurs 0 with header line.
    data :   messtab like bdcmsgcoll occurs 0 with header line.
    data : req_items type table of bapiebanc .
    data : wa_req_items type bapiebanc .
    data : req_acc_asg type table of bapiebkn.
    data : wa_req_acc_asg type bapiebkn.
    DATA : RETURN LIKE BAPIRETURN OCCURS 0 WITH HEADER LINE .
    *data : return type table of     bapireturn.
    *data : wa_return type bapireturn .
    data : number type ebeln .
    *****************************MOVE FILES******************************
    data : xsource type string .
    data : xdestin type string .
    data : destin1 type string .
    data : destin2 type string .
    DATA : DEST1 TYPE STRING.
    DATA : DEST11 TYPE STRING.
    DATA : DEST2 TYPE STRING.
    DATA : DEST22 TYPE STRING.
    data : sou_dir_name like SALFILE-LONGNAME.
    data : tar_dir_name like SALFILE-LONGNAME.
    data : tar_dir_name1 like SALFILE-LONGNAME.
    data : sou_filename like EDI_PATH-PTHNAM .
    data : tar_filename like EDI_PATH-PTHNAM .
    data : filename1  type string .
    data : tar_filename1 like EDI_PATH-PTHNAM .
    data : file_itab like SALFLDIR occurs 0 with header line.
    data : wa_file_itab like SALFLDIR.
    data : file_count type i .
    data : dir_count type i.
    data : dir_table like sdokpath occurs 0 with header line.
    data : file_table like SDOKPATH occurs 0 with header line.
    data : wa_file_table like sdokpath.
    data : strr type string ,
           str1 type string ,
           str2 type string ,
           str3 type string .
    DATA : PA_VAL TYPE CHAR1.
    sou_dir_name = 'D:\barcodes\files\'.
    tar_dir_name = 'D:\barcodes\files-success\'.
        "success folder.
    CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
      EXPORTING
        DIRECTORY  = sou_dir_name
        FILTER     = '.'
      IMPORTING
        FILE_COUNT = file_count
        DIR_COUNT  = dir_count
      TABLES
        FILE_TABLE = file_table
        DIR_TABLE  = dir_table
      EXCEPTIONS
        CNTL_ERROR = 1
        OTHERS     = 2.
    IF SY-SUBRC <> 0.
    ENDIF.
    loop at file_table into wa_file_table.
    clear  :  strr , str1 , str2 , str3 .
      strr = wa_file_table-PATHNAME .
      concatenate sou_dir_name strr into str1 .
      concatenate tar_dir_name strr into str2 . " success
      concatenate tar_dir_name1 strr into str3 .         " failed
    FILE = STR1 .
    *start-of-selection.
    *&  Function For Retrieve Data From Excel
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        filename                      = FILE
        i_begin_col                   = col_start
        i_begin_row                   = row_start
        i_end_col                     = col_end
        i_end_row                     = row_end
      tables
        intern                        = excel_bdcdata
    EXCEPTIONS
       INCONSISTENT_PARAMETERS       = 1
       UPLOAD_OLE                    = 2
       OTHERS                        = 3.
      IF sy-subrc NE 0.
    WRITE : / 'File Error'.
    EXIT.
    ENDIF.
      loop at excel_bdcdata.
        translate excel_bdcdata to upper case .
        move excel_bdcdata-col to it_index.
        assign component it_index of  structure  wa_file to <fs> .
        move excel_bdcdata-value to <fs>.
        at end of row.
          append wa_file to it_file .
            clear wa_file.
        endat.
      endloop.
    sort it_file by key1. "pur_grp maktx plant  .
    it_header[] = it_file[].
    delete adjacent duplicates from it_header comparing key1 pur_grp maktx
    plant .
    data : h_item(5) type n .
    data : h_pack(10) type n .
    data : line_no(5) type n .
    data : ln_no(5) type n .
    loop at it_header into wa_header .
    ln_no = 1.
    h_item = h_item + 10.
    h_pack = h_pack + 1.
    wa_req_items-preq_item = h_item .
    wa_req_items-doc_type = 'BOM'.
    wa_req_items-pur_group = wa_header-pur_grp .
    wa_req_items-MATERIAL = wa_header-maktx .
    wa_req_items-plant = wa_header-plant .
    wa_req_items-pckg_no =  h_pack .
    wa_req_items-deliv_date = str6 .
    wa_req_items-item_cat = '0'.
    wa_req_items-acctasscat = 'P'.
    *wa_req_items-distrib = '2' .
    **wa_req_items-gr_ind = 'X'.
    wa_req_items-ir_ind = '2'.
    wa_req_items-purch_org = 'TISL' .
    wa_req_items-QUANTITY =  wa_header-s_qty.
    wa_req_items-PREQ_NAME =  wa_header-req.
    wa_req_items-SUPPL_PLNT = wa_header-supl.
    wa_req_items-trackingno = wa_header-trackno.
    append wa_req_items to req_items .
    clear wa_req_items.
    wa_req_acc_asg-preq_item = h_item .
    wa_req_acc_asg-g_l_acct = wa_file-gl .
    WA_req_acc_asg-wbs_elem  = wa_header-wbs .
    append wa_req_acc_asg to req_acc_asg .
    clear wa_req_acc_asg.
    h_pack = h_pack + 1  .
    endloop.
    clear ln_no .
    ***BREAK-POINT.
    *& BAPI FUNCTION
    call function 'BAPI_REQUISITION_CREATE'
    importing
       number                               = number
      tables
        requisition_items                   = req_items
       requisition_account_assignment       = req_acc_asg
       return                               = return .

    Can someone please give me sol........

  • BAPI for Outbound Delivery Creation with reference to Sales Order - VL01N

    Hi Everybody,
           We are in ECC 5.0 version.
           I want to create a enhancement for Outbound Delivery Creation with reference to a Sales Order.
           Is any BAPI available for this ?
           Any input on this will be very much helpfull.
           Please suggest any BAPI available for this, or should I go for BDC using VL01N or VL04 ?
           Thanks in advance.
    regards,
    Nagarajan.J

    Hi Nagarajan,
    The BAPI BAPI_DELIVERYPROCESSING_EXEC meets your requirement. You can create delivery with reference to sales order.
    The below is the sample code...
      data:lt_request      like bapideliciousrequest
                                    occurs 0 with header line,
           lt_createditems like bapideliciouscreateditems
                                    occurs 0 with header line,
           lt_return       like bapiret2
                                    occurs 0 with header line.
        lt_request-document_type      = 'A'.
        lt_request-document_numb      = vbeln.
        lt_request-document_item      = posnr.
      lt_request-material           = matnr.
      lt_request-plant              = werks.
      lt_request-stge_loc           = lgort.
      lt_request-quantity_base__uom = base_uom_qty.
      lt_request-delivery_date      = sy-datum.
      append lt_request.
      call function 'BAPI_DELIVERYPROCESSING_EXEC'
      EXPORTING
        DELIVERY_EXTEND       =
        TECHN_CONTROL         =
        tables
          request               = lt_request
          createditems          = lt_createditems
          return                = lt_return.
      loop at lt_return where type = 'A'
                          or  type = 'E'.
        exit.
      endloop.
      if sy-subrc <> 0.
    Use the BAPI for Commit
        call function 'BAPI_TRANSACTION_COMMIT'
             exporting
                  wait = 'H'.
      endif.
    Thanks
    Ramakrishna

  • Replacing the bapi with the new bapi for purchase order creation

    Hi,
       In the customised code call is there for the bapi function module  'BAPII_PO_CREATE'.
       Iam trying to replace the call with the code that calls function module 'BAPI_PO_CREATE1'.
       Please help me about what changes I needed to do in the code . As there is much mismatch in the import and export parameters
    and tables in both the function modules.
       Thanks in advance.
    Edited by: anwar.indya on Mar 25, 2011 2:18 PM
    Edited by: anwar.indya on Mar 25, 2011 2:19 PM

    Hi,
    As per  u r requirement
    you can use  : BAPI =>    BAPI_PO_CREATE  with suitable Document  Type ( Stock trasnfert : STO )
    IF  u want to auto po must be created after each delivry in this case you need to use BADI
    'MB_MIGO_BADI; In This BAPI  There is method : POST_DOCUMENT
    In this method u can write code for Auto PO Creation by using BAPI .
    Hope This will Resolve u r query.
    Thanks and Regads
    Santosh

Maybe you are looking for

  • CCMS - alert notifications through mail

    HI All, We have configured CCMS in our Landscape . Everything is working fine. But now we have a new requirement to add some receiptents in CC list of alert mails. I have included all the receioptents list in alert category.  But my question is how d

  • Sizing a Site Server

    Hi, i have 5000 clients and i have to size the site server, 2000 are in the same location, others are located on different sites. I have to deploy all role on a same server (Stand-alone primary site) with all roles (SQL + SCCM roles)+WSUS. What hardw

  • Help required with regex

    I have a tagged corpus which need to run through a program and extract reqired data from it but I don't want the tags to be displayed with the data e.g [NP]Bill[VP]is [art]a [adv]very [adj]small [np]boy. the result should be in this form: bill is a v

  • App Store not loading on iPad 2

    The updates tab on the App Store does not load. I already reset my ipad twice, skipping the red bar. Also, i restarted the app multiple times but it does not load, though all other tabs work. Pls pls pls help

  • (re)-partition hard drive

    running Lion on one partition, Snow Leopard on another + i have a data hard drive partition. when i was trying to update SL i got an error that there's not enough space to download the update, so i was trying to enlarge the partiiton a bit, so i redu