Idoc basic type and extension copied to new extension now how to trigger

HI EXPERTS,
I have copied a basic type and extension of idoc and now my new idoc has extension name say ext1.
my old extension name is ext .
now i want to trigger an idoc with ext1 extension ,i do not want to change idoc settings in we20.
how can i do this ,please some one reply .
Thanks,
Pradeep.

hi nikhil,
reason is we want two different transport paths ,one team is amking changes to existing things ,i am working on another pahse of project .
I have almost reached near to the solution .i have set the message variant in we20 ,now when i trigger its generating 2 idocs
i am trying to write code in exit but in exit there there is no field idoc_mescod or idoc_cimtype
Kindly suggest!!!1
Thanks,
pradeep.

Similar Messages

How can I delete the IDOC basic type and extension?

Hi,Expert:
There are some idoc basic types and extension which are not used any more in our system.Now we want to delete them.but when I delete them using tcode:WE30, system said that the basic type or extension has been released and they can not be deleted.
How should we do to delete these idoc types?
Thanks

From the top menu > edit> cancel release then try to delete
a®s

Release? while assigning Z Message Type to a Standard SAP IDOC Basic type

Hi Experts,
Am trying to assign a custom Message Type to a Standard SAP IDOC Basic type in WE82 transaction, but am not sure How to find the Release(last column of WE82 Tx)? Pls. let me know.
Thank you

Hello,
In case of IDOC, Go to Transaction WE30, type your IDOC name & select basic type & extension.
After that select Go to -> Header data (Shift+F7), you will Idoc header info. In the same pop-up you will find IDOC release for which version.
Regards,
Sameer

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

Inbound IDOC basic type HRMD_A07: Why no validation available?

I am using a standard inbound IDOC basic type HRMD_A07 to update employee master data (IT0000 & IT0001). However, i found out that this IDOC just directly updates to the infotypes without any validation. For example, i provide an invalid company code (BUKRS) and personnel area (WERKS), the IDOC still updates into database without any proper validation.
Filled the following fields in the IDOC segments:
E1PLOGI
plvar=01, otype=P, objid=00000001, opera=I
E1PITYP
plvar=01, otype=P, objid=00000001, infty=0000, begda=20120101, endda=99991231
E1P0000
pernr=00000001, infty=0000, endda=99991231, begda=20120101, massn=01, massg=01, stat1=3, stat2=3
E1PITYP
plvar=01, otype=P, objid=00000001, infty=0001, begda=20120101, endda=99991231
E1P0001
pernr=00000001, infty=0001, endda=99991231, begda=20120101, bukrs=XXXX, werks=XXXX, persg=1, persk=EC, abkrs=99, plans=00000111, otype=S
Please help me out in case I am missing something. Thanks.

Additional Info:
In WE21 at the TRFC Port, it is possible to set this Option:
Send Only Fields of Selected Segment Version
The segment data of the IDoc is passed to this port with the length matching the segment definition of the release specified in the partner profile.
But if we are using an reduced message type, all fields of the newest release are in the segement.
The docu tells that this will be done in function EDI_DOCUMENT_OPEN_FOR_CREATE.
But it is never called when createing an material IDOC with BD10.
Bug or feature?
Kind regards
Manuel

Status 51 in IDOC Basic type: ORDERS05

Hi,
When Inbound IDOCs of IDOC basic type : ORDERS05 are processed in bulk then few of the IDOCs go to status 51 with error message : "Sales organisation, Distribution channel and division cannot be determined for the customer (followed by customer number)". But when these failed IDOCs are processed again using BD87 few more IDOCs go to status 53. Similarly if the failed IDOCs are reprocessed for 4/5 times without changing any data in the IDOC then all the IDOCs go to status 53.
When I try to create a duplicate IDOC using WE19 then the IDOC goes directly to status 53. So if processed in bulk then few IDOCs go to status 51 and when processed one by one the IDOCs go to status 53 without any problem. Can someone tell me what is the reason behind it and what has to be done to avoid the continuous reprocessing of IDOC.

Hi,
When Inbound IDOCs of IDOC basic type : ORDERS05 are processed in bulk then few of the IDOCs go to status 51 with error message : "Sales organisation, Distribution channel and division cannot be determined for the customer (followed by customer number)". But when these failed IDOCs are processed again using BD87 few more IDOCs go to status 53. Similarly if the failed IDOCs are reprocessed for 4/5 times without changing any data in the IDOC then all the IDOCs go to status 53.
When I try to create a duplicate IDOC using WE19 then the IDOC goes directly to status 53. So if processed in bulk then few IDOCs go to status 51 and when processed one by one the IDOCs go to status 53 without any problem. Can someone tell me what is the reason behind it and what has to be done to avoid the continuous reprocessing of IDOC.

F110S - debugging - Idoc basic type PEXR2002

Hi,
i'm trying to debug F110S and its not stopping in FEDI0003 routines. am i missing something.
i have to populate bank details in this Idoc (basic type pexr2002 and message type PAYEXT)
please let me know.
Thanks.
Edited by: vij k on Aug 5, 2009 9:51 PM

figured it out. Thanks.

Processing IDOC Basic type ORDERS05 in CRM...

I'm processing (via WE19) an IDOC (Basic type ORDERS05) to create a Sales order withing CRM. I'm getting there in that a sales order is being raised, although there is no item level details so far. I know that config of the system plays a big hand in what fields within the IDOC need to be populated but has anyone actually posted/raised a Sales order in this way and can you tell me what fields within the IDOC are mandatory. Or perhaps suggest how I might derive this.
Ideally I wanted to extract a sales order and produce an outbound IDOC and then compare the contents, but I can't (don't know how) do this.
Any help would be greatly appreciated.

Hi Garry,
Here is an order from WE19, which works
        E1EDK01
     ACTION: [QUAL] - suggesting 000 - no changes
        E1EDK14
     QUALF: [QUAL] - suggesting 008 - sales org
     ORGID: [ORGANIZATION] - anything you have defined /your side/
        E1EDK03
     IDDAT: [QUAL] - suggesting 002 - delivery date
     DATUM: [DATE] - any date
        E1EDKA1
     PARVW: [QUAL] - may use AG as 'sold to' here
     PARTN: [PARTNER#] - any partner defined
        E1EDKA1      - not necessary
     PARVW: [QUAL] - may have different 'sold to' and 'ship to' or 'bill to'
     PARTN: [PARTNER#]
        E1EDP01
     POSEX [ITEM#] - for example '1'
            MENEE [Unit of measure] - PCE for peaces
                 E1EDP02
               QUALF: [QUAL] - suggesting 001 - customer order
               BELNR: [document number] - document #. any
                 E1EDP20
                WMENG: [Scheduled quantity] - any - quantity
               EDATU: [Date] - any - when to deliver
                 E1EDP19
               QUALF: [QUAL] - for example 001 - used by customer, 004 - used by manufactured
               IDTNR: [material ID] - material ID
        E1EDS01
     SUMME: [Total value of sum segment] - check for the number of lines in PO1.
Hope this helps and do not forget to allot points.
Regards,
Martin

Basic type and message type

hi,
may i know what is the difference between basic type and message type in WE05.
thanks

Hi,
This is similar as Subject of a mail and content of the mail..
Without seeing the contect if the give appropriate subject we will know what was the mail regarding.
the same thing applies to IDOC also.
Regards,
Nagaraj

Idoc Message type and Process Cosde for CJ01 transaction

Hi,
What is the Idoc message type and inbound Process code for CJ01 transdaction?
Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
Thanks.

Hi,
All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
Go to se93 and search for BD* and look for the description.
Regards,
Nilesh.

Idoc basic type PEXR2003

Hi all,
can any one take me the structure of Idoc Basic type PEXR2003.
WE60 ==> Basic Type checked ==> enter PEXR2003 ==> F9 key
Thanks in advance
Ragerds
Mercuryx

Up,
No ideas??????

What is the IDOC Basic Type for sales order creation

Hi Experts,
Can anyone tell me Idoc Basic type for sales order creation.
Thanks
Prashant

Hi,
The basic types for creating the order are:
1.Orders01
2.Orders02
3.Orders03
4.Orders04
5.Orders05.
The basic type for SIS order is:
SISCSO01.
Regards,
Krishna.

IDOC message type and message code and function?

Hai...
anyone can explain with example what is IDOC message type and message code and function? how it is used?
regards,
prabakaran

Hi
An IDoc type can be implemented for various "logical" messages; one message can also be assigned to different IDoc types (m:n relationship).
The message is defined by the values for message type (required), message code (optional) and message function (optional). These three fields belong to the key fields in the partner profiles, which are used, for example, to determine inbound processing. If the 'Message type' field is not maintained (e.g. in the case of a control record from Release 2.1, in which MESTYP did not exist), the IDoc Interface uses the value from STDMES (EDI message type).
If possible, the descriptions of the message type should be linked to the corresponding EDI message type.
The message ORDERS (= message type) identifies purchase orders (outbound) and sales orders (inbound).
Message code or Process Code for Inbound Processing
Code which identifies a process type.
The process type determines which process is used to convert an IDoc to an SAP document.
Process code for outbound processing
Code which identifies the type of data which is to be sent via the IDoc interface.
Using the process code, the IDoc interface finds the application selection module which converts the SAP document into an IDoc.
The process code is only used with applications which perform outbound processing via Message Control (NAST).
Thanks & Regards
Kishore

My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?

My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?

Authorization
iTunes Store- Authorize or deauthorize your Mac or PC.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.

My computer crashed and we have a new one. How do I use my ipod to get my music back on my new computer?

My computer crashed and we have a new one. How do I use my ipod or iphone to put my music on the new computer? Windows 7

See also Recover your iTunes library from your iPod or iOS device.
tt2

Idoc basic type and extension copied to new extension now how to trigger

Similar Messages

Maybe you are looking for