IDOC Configuration Help
hello,
i have just started learning concepts of IDOC and ALE.
And found some docuemnts for the same.
WE have 2 clients in our dev server. 700 & 600.
I want to test idoc concepts on these clients of same servers.
Firstly i checked logical systems on client 700.
Have a look.
here 600 client is not shown but it exists in our system.
Moreover , 400 client is shown..but it does not exists in our system.
Here is the view of table T000
Please tell me...what this is all about.
Whether i need to create a new logical system or assign client to existing logical system
or nothing.In order to run idoc's?
Hi Abhishek,
Refer the steps below and let me know if it helped.
ALE configuration normally involves the seven basic steps which are:
1. Creating users for ALE Transfer
2. Creating Logical system and assign the client
3. Creating the RFC
4. Configuring Distribution Model
5. Configuring and checking the port
6. Configuring and checking the partner profile
7. Creating the message type
The steps to configure and use it is mentioned below:
Notes: 105 is Sender and 800 Receiver System in the example below:
1. Create Users for ALE transfer in both receiving and sending client/systems.
Create users in both the client/systems giving the same user name and proper authorizations. We need to use these user ids to logon through the remote connection and perform the IDOC transfers.
2. Creating Logical Systems
o Create logical systems for both sending and receiving systems in both systems.
o Login to Client 105 (SENDER)
o Go to T. Code SALE
o Expand Sending and Receiving Systems
o Expand Logical Systems
o Click on Define Logical System
o Click on New Entries
o Create Logical Systems with naming convention 'system name'+'CLNT'+client no . For example for sending system ex: SSPCLNT105
o Create Logical Systems with naming convention 'system name'+'CLNT'+client no ex: example for receiving system ex SEDCLNT800
o Save and come back
o Click on Assign client 105 to Logical system SSPCLNT105
o Now, logon to client 800, repeat the same above process to create logical systems SEDCLNT800 and SSPCLNT105
o Save and come back
o Click on Assign client 800 to Logical system SEDCLNT800
3. Creating the RFCs
o In client 105, Go to T. Code SM59
o Expand R/3 Connections
o Enter RFC Name as SSPCLNT105 (give this name same as that of logical name created in step1 so that the ports are automatically created)
o Connection Type as 3
o Language as EN
o Give the logon details for client 800 (usually, we create a new user with proper authorizations for this ALE data transfer)
o Click on Remote logon button to test the RFC
o Now, go to client 800 and repeat the same process to create the RFC connection to client 105, giving logon credentials to client 105
4. Creating Customer Distribution Model
(we usually create this in the original system(sending system) and then distribute it to other systems. The actual creation of the model requests that you mention a technical name for the model (unique identifier in the systems landscape), a sender system, a receiver system and message types to exchange between those systems.)
o In Client 105, Go to T. Code BD64
o Click on change and Create model view button
o Enter the short text and Technical name as ZSSP_SED
o Select the model and click on Add Message Type Button,
o Give the Sender as SSPCLNT105, Receiver as SEDCLNT800,
o Give Message type as required, Ex: 'HRMD_A' for HR Module.(usually Message types given by SAP are available for a particular module, see this using tcode WE81, if not create a message type first)
o Note: If we are performing this data transfer task for all modules at a Customer site, then we will need to use the appropriate message type and create a new Distribution model.
o Select the above model view and click on Environment -> Generate Partner Profiles
o Select Transfer IDOC Immediately and Trigger Immediately radio buttonsF
o Click on Execute
o You should get a list in green color which means it executed successfully.
o Back to main screen, select the model view
o Click Edit->Model view->Distribute
o Click on continue
o You should get a list saying model view is distributed successfully.
5. Checking the Port
o In client 105, Go to T. Code WE21
o Expand Transactional RFC
o Find the port from the list which is created using BD64 for SEDCLNT800 (Receiving system) RFC Destination.
6. Checking the Partner Profiles.
o In client 105, Go to T. Code WE20
o Expand Partner Type LS
o Select the Partner profile SEDCLNT800
o Double click on Message Type (For Ex: In HR Module, HRMD_A in Outbound parameters.)
o Check Receiver Port is assigned correctly
o Check the Basic type as your Basic IDOC object.
o In the sending system, select the option to transfer IDOCs immediately.
o By default, in the receiving system IDOCS are bunched together and received.
7. Creating the Message Type
o Message type defines the 'meaning' of data. It is just a logical entity that gets connected to the Idoc type (in tcode we82) or gets connected to the distribution model (in tcode BD64)
o If necessary create a new message type. In client 105, go to tcode we81.
o Click on change, continue
o Click on New Entries button
o Give message type in customer namespace Z* and description
o Save and back
This should be helpful for ALE configurations.
Thanks,
Anupam
Similar Messages
-
IDoc Configuration for Production Order Creation and Change
Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal THi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar -
IDOC configuration in 46C for BI 7
Dear Experts
Is there a set of steps to create the idoc configurations in R/3 for data transfer between R/3 46C and BI 7?
After refresh, the idoc related configurations are lost and BI is unable to load from Source System R/3.
Thanks for reading and hope you can advise on the above.
Best regards
PascalHello Pascal,
Maybe a thread in the PI forum would help you better:
Process Integration (PI) & SOA Middleware
Check the following thread:
Re: interface help
Regards,
Eduardo Rezende -
Hi Guru's
Can any one of you explain the Idoc configuration steps in brief with t.codes?
rgds,Cherukuri:
<a href="http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli">IDoc Config Guide</a>
In case the link doesn't work:
Google this: "Axel Angeli SAP R/3 guide to Idoc"
Idoc Transactions:
Transaction Code
SALE:Display ALE Customizing
SM59:RFC Destinations (Display/Maintain)
BD64:Maintenance of Distribution Model
BD82:Generate Partner Profiles
WE20:Partner Profiles
WE21:Port definition
WE30:IDoc Type Development ( View Segments of an IDOC )
WE60:IDOC segment field description
WE19:Test tool for IDOC Processing
WE05:IDOC Lists
WE09:Search for IDOC in Database
BD87:Status Monitor for ALE Messages (Process IDOC manually)
BD73:Start Error Handling for Non-Posted IDocs
WEDI:IDOC and EDI Basis
Change Pointers:
BD50:Activate change pointer for message type
BD61:Activate Change pointer generally
BD52:Triggering table and field name
BD21:Creates and sends the Idoc for Change pointer method
BD59:Set the field for Filter in Distribution Model
BD95:Along with BD59 , used for setting a filter in Distribution model
BD60:Assigning FM to the outbound IDOC , and specifying Change pointer Table and Object
BD56:Segment Filtering
Inbound IDOC:
WE81:Create Logical message types
WE82:Assign Messages for IDoc Type
WE31:Development IDoc Segment
WE57:Assignment of FM to Log, Message and IDoc Type
BD51:Characteristics of Inbound FM
WE42:Creating Inbound Process Code
BD67:Function modules for Inbound ALE-EDI
Assign points if info helps Vj -
Hi Gurus,
Please tell me the ALE and Idocs configuration settings
Thnaks in advanceHi,
Please refer to the details mentioned in the hyper-links beow.
You will get the details how to go about it.
To see the IDOC & status check it in WE02/WE05
You will get step by step process.
ABAP Development
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
http://help.sap.com/saphelp_45b/helpdata/en/35/b0ea5187a62488e10000009b38f9b7/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c4/6bc368fef411d28d0900104b56737d/frameset.htm
ABAP Development
Follow below steps to create custom IDOC.
1.Create segments through transaction WE31.
2.Create IDoc Type through transaction WE30 by attaching created segments.
3.Message type through transaction WE81.
4.Link Idoc and message type in WE82 transaction.
Check the transaction WEDI for ALE settings
Check these links for more details on IDoc's:
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
Hope this will help.
Regards,
Priyanka. -
Hi ,
can any one send me step by step ALE/IDOC Configuring please it is very important for me..
Thank's in advance..hi,
check all the below links.......
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
For ALE -- IDoc's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
ALE/ IDOC/EDI
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
for MM
http://help.sap.com/saphelp_nw04/helpdata/en/78/217da751ce11d189570000e829fbbd/content.htm
one more good link
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
~~Guduri -
Hi Guys,
Just wanted to check what are the configuration required at FI level for FINSTA01 Idoc. Any document will be apppreciated.
my email is [email protected]
bye ... ajDear boghendra
check the links
[IDoc Structure |http://help.sap.com/saphelp_46c/helpdata/en/92/58ca56417011d189ec0000e81ddfac/frameset.htm]
[General Construction of the IDoc|http://help.sap.com/saphelp_46c/helpdata/en/1a/0e37cd539911d1898b0000e8322d00/frameset.htm]
thanks
G. Lakshmipathi -
File1-RFC-File2-IDOC design help
Hi,
Here is the business requirement. Please help with design options.
There are two files(Business Partner.XML & Vendor.xml) on FTP server.
Pick up BP.XML file, call RFC(BAPI) to post the data in R/3(ECC).
If BAPI return code is success, then pick up 2nd file(Vendor.xml) and post corresponding record(vendor#) as the IDOC(CREMAS) in R/3.
If BAPI retrun code is failed, then do not post the IDOC(corresponding record in 2nd file).
Both files has vendor number as the key field.
<b>File1 & File2 may have upto 10 records in each file</b>.
Thanks in advanceHi Mallik,
You can have both the files processed at the same time using two different interfaces.
1. File ->RFC and
2. File ->IDOC.
Now for the IDOC in the receiver system, partner profile make sure that for the message type CREMAS, <i><b>the IDOC configuration is to be collected.</b></i>.
In the first scenario RFC, make sure that if the business partner posting have been done successfully then submit the program RBDMON00(t-code is BD87) with the IDOC type and IDOCs having the status 64.
Cheers
JK -
Idoc configurations in PI7.3
Hi Experts,
For an Idoc scenario prior to PI 7.3, RFC destination, port, logical system and partner profile needs to be created in case of outbound Idoc scenario and again at XI side we need to create RFC destination, port and loading of meta data....
Is the same is applicable for PI 7.3 as well? since Idoc resides in AAE in PI 7.3, I believe there could be some changes applicable for these settings of Idoc....
Pls provide your inputs.....Hi,
Along with the links provided by Phani and Gayatri you can laso refer this thread for IDoc configuration in PI7.3
IDOC settings from sap r/3 to sap pi7.3
IDoc Packaging in PI7.3
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/4096a6b3-3dc3-2d10-bf87-f63d5340a916
Configuring PI 7.30 Java IDoc Adapter
PI/XI: PI 7.3 New Java based IDOC adapter's configuration (sender, receiver) - teaser
IDoc Acknowledments in PI7.3
acknowledge handling for IDOC_AAE in sap PI 7.3
IDoc_AAE acknowledgement handling in PI 7.3
IDoc related error in PI7.3
Processing error in Idoc_AAE sender channel
Hope its informative.
Regards,
Amol -
ALE/ IDOC CONFIGURATION OBJECT
IT'S URGENT
I NEED AN OBJECT IN ALE/IDOC CONFIGURATION SETTINGSHi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM -
1941W configuration help needed
Our Deployment Scenario:-
1941W Gigabit Ethernet 0/0 is connected to the PPOE connection of the ISP.
Gigabit Ethernet 0/1 is connected to the wired LAN
I have created 2 wireless radio Cisco_Kamran_BGN which is operating at 2.4 Ghz Devices and Cisco_Kamran_A which is operating at 5Ghz Devices.
I have created 2 VLans for the Wireless.
Vlan 10 for Cisco_Kamran_A 192.168.10.x
Vlan 11 for Cisco _Kamran_BGN 192.168.11.X
The problem is the Wireless users are not getting the IP address from the respective DHCP server which has been configured on the Router.
Can please any from the community help me and show me where I am missing the configuration.
Please find my router & ap configuration below.
Router Configuration
Router#
sh run
Building configuration...
Current configuration : 3022 bytes
! No configuration change since last restart
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
enable secret 5 $1$TdQt$npYeaf/W0kRElcfMggzJ31
no aaa new-model
service-module wlan-ap 0 bootimage autonomous
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 192.168.11.1 192.168.11.10
ip dhcp pool DHCP
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_A
network 192.168.11.0 255.255.255.0
default-router 192.168.11.1
dns-server 195.229.241.222 213.42.20.20
ip dhcp pool Cisco_Kamran_BGN
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 195.225.241.222 213.42.20.20
multilink bundle-name authenticated
crypto pki token default removal timeout 0
license udi pid CISCO1941W-E/K9 sn FCZ1553C1VK
hw-module ism 0
redundancy
bridge irb
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered GigabitEthernet0/0
arp timeout 0
no mop enabled
no mop sysid
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet0/0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
no ip address
interface Vlan10
ip address 192.168.10.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Vlan11
ip address 192.168.11.1 255.255.255.0
ip access-group DSL_ACCESSLIST in
ip nat inside
ip virtual-reassembly in
interface Dialer1
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
ppp authentication pap callin
ppp pap sent-username xxxxxx password 0 xxxxxx
ppp ipcp route default
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list DSL_ACCESSLIST interface Dialer1 overload
ip access-list extended DSL_ACCESSLIST
permit ip 192.168.0.0 0.0.255.255 any
control-plane
line con 0
password xxxxxx
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password xxxxxx
login
transport input all
scheduler allocate 20000 1000
end
Router#
Router#
Router#
Access Point Configuration
ap#
ap#
ap#
sh run
Building configuration...
Current configuration : 2603 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$JxdQ$a2/00bWJuhUKP9QLC94YD/
no aaa new-model
dot11 syslog
dot11 ssid Cisco_Kamran_A
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 1045081417161C5A555C7A7B
dot11 ssid Cisco_Kamran_BGN
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 020D05561907017015165949
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
description 802.11bgn radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
broadcast-key change 3600
ssid Cisco_Kamran_BGN
antenna gain 0
station-role root
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1
description 802.11a radio
no ip address
no ip route-cache
encryption mode ciphers aes-ccm
ssid Cisco_Kamran_A
antenna gain 0
no dfs band block
channel dfs
station-role root
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.10
description 802.11a bridge
encapsulation dot1Q 10
no ip route-cache
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
bridge-group 10 spanning-disabled
interface GigabitEthernet0.11
description 802.11bgn bridge
encapsulation dot1Q 11
no ip route-cache
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
line con 0
no activation-character
line vty 0 4
login local
end
ap#
ap#
ap#Hi Stepehen,
Did the configuration as per your advice but i am getting the below mentioned error which i have highlighted it in red. Please advice what needs to be done.
Home
Re: 1941W configuration help needed
created by Stephen Rodriguez in Getting Started with Wireless - View the full discussion
conf t
interface Dot11Radio0
no ssid Cisco_Kamran_BGN
no encryption mode ciphers aes-ccm
exit
interface Dot11Radio1
no encryption mode ciphers aes-ccm
no ssid Cisco_Kamran_A
exit
dot11 ssid Cisco_Kamran_A
vlan 10
dot11 ssid Cisco_Kamran_BGN
vlan 11
exit
interface Dot11Radio0
encryption vlan 11 mode ciphers aes
ssid Cisco_Kamran_BGN
exit
interface dot11radio0.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio 0.11
encapsulation dot1q 11
bridge-group 11
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
exit
interface Dot11Radio1
encryption vlan 10 mode ciphers aes-ccm
ssid Cisco_Kamran_A
interface dot11radio1.1
encapsulation dot1q 1 native
bridge-group 1
interface dot11radio1.10
encapuslation dot1q 10
bridge-group 10
Configuration of subinterfaces and main interface
within the same bridge group is not permitted
end
wr
Reply to this message by going to Home
Start a new discussion in Getting Started with Wireless at Home -
Idoc configuration in IDES??
hi experts ,
Can somebody explain me about , how do we do entire Idoc configuration in IDES and we can execute the same as sample in IDES
Explain me in step by step for outbound and inbound ...
Thanks
Edited by: MM group on Jul 2, 2010 10:44 AM1 Logical System
2 Assign Logical system
3 RFC
4 Port
5 Customer distribution model
6 Partner profile
7 CDM distribution
Tcode : SALE
First 2 steps not necessary ( Basis work already done )
Two logical system created
Ls110 -Sender
Ls800 - Receiver
RFC
RFC establishment SM59
Receiving system IP address or hostname
System number, client id
Username, password
Ports
We21 define ports
TRFC ale
File Edi
CPI_C - R2 connections
In the port we need to define Port name and RFC destinations
And version
Customer Distribution Model - BD64
Sender
Receiver
Message type
Partner profile we20 , BD62
Partner may be customer, vendor, logical system
In BD62 define the partner system (LS800)
One more additional entry SYNC for synchronization
Post processing Agent - workflow
MATMAS 03 03 is the version
Collect idoc we need to trigger
Transfer idoc will be send immediately
With message control
Which program need to run for generating the idoc
With out message control
For some of the programs have inbuilt idoc generation for that case no need to mention program name
Process code
Distribute CDM
Receiving System:
Partner profile is going to control all the thing
BD64 - > edit - > model view - > distribute
BD67 Function module assigned to the process code
BD10 used to create idoc for material
Master idoc generated only buffered
One master idoc multiple communication idoc
One communication idoc generated
We02 idoc satus -
ALE/IDOC configuration study Material
Hi All,
Anyone come across ALE/IDOC configuration study Material which consists of
ONLY ONE PAGE. If YES, Please pass it on.
Points Assured \[but not given. Dont write such statements here anyway!\]
Regards,
Viji.
Edited by: Jan Stallkamp on Aug 6, 2008 2:26 PMHi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM -
ALE/Idoc configuration - (R3--XI--File)
Iam XI developer and know basic ABAP. Client is NOT using any Idocs right now. I have to develop a scenarios ( including ALE/Idoc Configuration on R3 for standard Idocs like MATMAS, DEBMAS, CREMAS etc ) both Master data and change pointer to XI and then to File.
Would some one show me step by step procedures for ALE/Idoc configuration on R3 and XI.I need to send both Master data and incremental data to XI possibly by bundling Idocs to XI.Hi Ram...
Once the mapping is done then re-check the ALE settings.
<b>SAP XI</b>
1) <b>RFC Destination (SM59)</b>
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
<b>2) Create Port (IDX1)</b>
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
<b>3) Load Meta Data for IDOC (IDX2)</b> a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
<b>SAP R/3
1) RFC Destination (SM59)</b>
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
<b>2) Create Port (We21)</b>
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
<b>3) Create Partner Profile (WE20)</b>
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
<b>In SLD System Landscape Directory</b>
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
<b>In Transaction SALE</b>
Define and Assign the logical system name.
Cheers,
raghavesh -
Hi guru's what is RSEOUT00 in ale idocs plz help me
hi guru's what is RSEOUT00 in ale idocs plz help me
Hi,
Check this link u will find ur answer
<u>sap.ittoolbox.com/groups/technical-functional/sap-interfaces/idoc-status-remains-at-30-427371</u>
sap.ittoolbox.com/groups/technical-functional/sap-wf/idoc-process-509096
www.erpgenie.com/sap/sapedi/operations.htm
Hope it is answered....
Regards,
sana.
reward if useful....
Maybe you are looking for
-
In trying to dump my Elements 10 catalog into my LR catalog, I can see I have mistakenly created a second catalog. My main catalog is on the external drive and remains in the original 5.0 version, the "elements 10 upgraded" was imported into the 5.6
-
Can't load previously installed Acrobat 9 Pro after my CS6 trial expired.
Can't load previously installed Acrobat 9 Pro after my CS6 trial expired. Keeps asking to buy the trial version or license the software (in reference to the CS6 trial, even though I'm loading my own Acrobat 9 Pro from my CS4 Creative Suite I purchase
-
Is there a picture organization app that will let you move pictures around the way you want?
I need a recommendation for a picture organization app that will actually allow you to sort pictures the way you want and have them stay in that order. The native app just doesn't allow me to sort my pictures into what ever sequence I want them in.
-
Decode statement using nvl function
I have inherited some code that using a decode and nvl. I'm unsure the purpose of it and want confirmation that it is flawed logic and a mistake. The situation can be recreated by setting up the following. CREATE TABLE XX_TEST (ID NUMBER, FIELD VARCH
-
hello, Have a Idoc to File scenerio. The file generated after mapping is Eg: <ns0:Document xmlns="urn:iso:std:iso:camt"> <tag0>data0</tag0> <tag1>data1</tag1> <ns0:Document> My requirement is to remove ns0 from the root element "Document" so output i