IDOC Configuration -- SAP + TIBCO

Hello,
We are configuring IDOC process in our system...
NON-SAP system will send the data to TIBCO which will in turn send the data to SAP...
We have created port in SAP and have supplied all required information to TIBCO Team...
When TIBCO in sending data to SAP [ TEST Environment ], it says 1 records processed...
But i am not able to see that idoc in my SAP system...
What could be the issue?
Thanks,
RaHuL...

Hi Rahul,
Use the Tcode ST01 for the Trace analysis. Find the more information in
http://help.sap.com/saphelp_nw04/helpdata/en/55/6981c7d46011d194bb00a0c94260a5/frameset.htm
Rgds
Sree
Edited by: Sree on Jul 20, 2010 11:35 AM

Similar Messages

Error while pushing idocs from SAP to XI

Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jain

hi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Unable to send an idoc from SAP R/3 to XI

Hi,
We are trying to send Z_CREMAS_SUSMM.CREMAS03 idoc from R/3 system to XI using IDOC adapter.
We have done the following steps.
On SAP R/3 system:
1.created a RFc Destination which points to the XI system using transaction SM59
2.created a port in which we have selected this RFC Destination using tansaction WE21
3.logical system for R/3 with transacion BD54
4.In WE20 transaction,we have configured the PartnerProfile by adding the IDOC message type to the outbound Parameters of XI Logical system.
On XI Sytem:
1.Created RFC destination
2.Created a Port
3.Loaded metadata
While trying to Post IDOc from SAP R/3,it is throwing an error"External segment name E2LFA1M001 cannot be interpreted"
and "Basic type CREMAS03 does not exist" on XI side.
Can anyone please provide a solution to this?

HI Jagruthi,
Have you loaded the metadata into the XI system by using IDX2?
If it is done then try to delete once and do once again.
And also delete the IDoc from IR and reimport the IDoc and activate it once again.
Regards
Goli Sridhar

Message SR 053 when i send idoc from SAp R/3 4.6C to PI 7

Hi,
I try to send idoc from SAP r/3 4.6C to PI 7. I had made ALE configuration in my sender system ( SAP 4.6C) but idocs are not sent to PI. In SM58 i have message "Name or password is incorrect (repeat logon)". Yet i'm sure that user and password are correct because if i test RFC destination using SM59 , test is OK.
Is somebody can help me ?

Hi,
In R/3 :
my RFC destination is type 3 and point to XI. The port in the partner profile point to this RFC destination. ( all seems good !).
In Xi : i created a port and i load manually idoc in idx2 to be sure that RFC destination was OK. Nothing in IDX5.
When i send idoc MATMAS using BD10 from R3 to Xi i have something very strange: first the message B1 038 "1 master IDocs set up for message type MATMAS" and just after
the XI logon screen appears !! Then message "1 communication IDoc(s) generated for message type MATMAS" and this idoc stay in SM58 with message "Name or password is incorrect (repeat logon)".
Somebody can give me requires caracteristics for XI user used in R/3 RFC destination ?

Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Problem in Outbound IDOC from SAP R/3

Hi,
I am working on to send an IDOC from SAP R/3 to XI.
I configured all necessary things as follows:
1. Created for XI in sender system -- RFC dest, PORT and a partner profile with an outbound parameters and reciever port as XI port.
2. created for sender system in XI -- RFC dest, PORT(as SAP<SID>) in IDX1 and assigned an idoc type(coming from sender system) to the port.
Now I am trying to push the IDOC from sender system using Test IDOC transaction and gets success message as data is passed to port.
My problem is I am not able to see any message in SM58 of XI server.
Could anyone help me out?
Thanks In Advance.
Yaseen.

Yasseen,
you hardly see the idocs in Xi in sm58. Try sxmb_moni.
If you see anything there try sm58 on the sending R/3. There you see if you have connection problems (eg authorization in XI or missing receiver determinitions).
Hope it hellps,
helge

Problem when pushing IDOC from SAP to XI

Hi,
I am trying to push an IDOC from SAP R/3 system to XI. When I processed the IDOC using test tool(WE19), it's showing message that IDOC sent succesfully to R/3 or External system. But in SM58 Transaction it gave error message that in Trabsaction IDX1: some RFC connection error. Then I opened the Transaction IDX1 on XI server, in that IDOC Adapter configuration I gave RFC destination, Logical system name of R/3 and saved it. Now When I tried again to push IDOC from R/3 to it's not giving any error message(in SM58), but I am not able to see any thing in SXMB_MONI. Can anybody guess what's happening? And also I am using fresh newly installed XI server. DO I need to configure something else? All RFC connections are well defined and working fine.

Hi,
It is not required to create Sender Agreement for the Idoc to XI scenario. Because it is implicitly exists.
Can u check Receiver Determination created in the XI once again. And also check for RFC destinations created in the R/3.
Hope it helps ..
-Moorthy

Idoc configurations in PI7.3

Hi Experts,
For an Idoc scenario prior to PI 7.3, RFC destination, port, logical system and partner profile needs to be created in case of outbound Idoc scenario and again at XI side we need to create RFC destination, port and loading of meta data....
Is the same is applicable for PI 7.3 as well? since Idoc resides in AAE in PI 7.3, I believe there could be some changes applicable for these settings of Idoc....
Pls provide your inputs.....

Hi,
Along with the links provided by Phani and Gayatri you can laso refer this thread for IDoc configuration in PI7.3
IDOC settings from sap r/3 to sap pi7.3
IDoc Packaging in PI7.3
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/4096a6b3-3dc3-2d10-bf87-f63d5340a916
Configuring PI 7.30 Java IDoc Adapter
PI/XI: PI 7.3 New Java based IDOC adapter's configuration (sender, receiver) - teaser
IDoc Acknowledments in PI7.3
acknowledge handling for IDOC_AAE in sap PI 7.3
IDoc_AAE acknowledgement handling in PI 7.3
IDoc related error in PI7.3
Processing error in Idoc_AAE sender channel
Hope its informative.
Regards,
Amol

Not able to import IDOC in SAP XI through SAP....

Hi,
I am able to see the IDOC in SAP box through we60 transaction. But its not visible while importing in Integration Repository (SAP XI).
Do i need to do any prior configuration for this...?
Thanks in Advance
Regards
Venkatesh

Just Check the Following
1. In in SCWV in the IR, Tick imoprt of IDOC and RFC allowed
2. Set in the System Information there of your SAP backend System.
3. Then Click on import and, key in the user details.
4. Check whether the user has authorizations for import ( For RFC S_RFC authorization ) is required.
Doing this an Import should be possible.
Reward points if useful
Regards,
Abhishek

Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

Hi all,
I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
2. SLD is OK: Technical System and Business System are correct for these two SAP System.
3. Integration Repository: all designed Object is OK.
4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
5. Runtime WorkBench: is OK. "Test Message" Function of "Integration Server" is OK.
In general, it is all OK.
But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
Thanks a lot for all in advance,
Best regards,
Vinh vo

Hi,
Possible checks
At R/3 side
1) Check in SMQ1 and SM58
At XI Side
1) Check in SMQ2 and IDX5
Check this
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
Regards
Seshagiri

IDoc Configuration steps

Hi Guru's
Can any one of you explain the Idoc configuration steps in brief with t.codes?
rgds,

Cherukuri:
<a href="http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli">IDoc Config Guide</a>
In case the link doesn't work:
Google this: "Axel Angeli SAP R/3 guide to Idoc"
Idoc Transactions:
Transaction Code
SALE:Display ALE Customizing
SM59:RFC Destinations (Display/Maintain)
BD64:Maintenance of Distribution Model
BD82:Generate Partner Profiles
WE20:Partner Profiles
WE21:Port definition
WE30:IDoc Type Development ( View Segments of an IDOC )
WE60:IDOC segment field description
WE19:Test tool for IDOC Processing
WE05:IDOC Lists
WE09:Search for IDOC in Database
BD87:Status Monitor for ALE Messages (Process IDOC manually)
BD73:Start Error Handling for Non-Posted IDocs
WEDI:IDOC and EDI Basis
Change Pointers:
BD50:Activate change pointer for message type
BD61:Activate Change pointer generally
BD52:Triggering table and field name
BD21:Creates and sends the Idoc for Change pointer method
BD59:Set the field for Filter in Distribution Model
BD95:Along with BD59 , used for setting a filter in Distribution model
BD60:Assigning FM to the outbound IDOC , and specifying Change pointer Table and Object
BD56:Segment Filtering
Inbound IDOC:
WE81:Create Logical message types
WE82:Assign Messages for IDoc Type
WE31:Development IDoc Segment
WE57:Assignment of FM to Log, Message and IDoc Type
BD51:Characteristics of Inbound FM
WE42:Creating Inbound Process Code
BD67:Function modules for Inbound ALE-EDI
Assign points if info helps Vj

Send IDoc from SAP SCM to XI

Hi,
Can somebody give me step by step procedure to send IDoc form SAP SCM to XI. We are not using ICH. IDoc is coming to SCM through EDI. Once it is posted in SCM, we want to send it to XI. We had a option of sending directly to XI through EDI connectivity, but for some reason we want to post it in SCM and then send it to XI.
Thanks,
Sanjay

hi,
sending IDOCs to XI is always the same
apart from documents section in the XI FAQ (link below)
when you can find some IDOC weblogs
you can also find lots of configuration examples for IDOC-XI scenarios in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Sending IDOC from SAP ECC to SAP MII

Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
Praveen

Hi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG

Idocs to SAP

I am sending at the same time(into the same XML) 3 idocs to SAP-APO system, and just the first one is processed, the another ones are in status 64(ready to be transferred).
The partners profile are to be executed immediately and the process code is BAPI.
Anyhelp would be apreciated.

If your system is configured to process IDocs in synchronous mode i.e. entry in TEDEF table has the following value:
field: EVENTT value: TRFC-IDOC
field: ROUTID value: SYNCHRON
Then, your system might be encountering situation where there is no enough dialog WP to process these IDocs.
If you system is configured to process IDocs in batch mode then check the frequecy of the RBDAPP01 background program. This program is responsible to process the IDocs in background by not using the dialog work process.

IDOC Configuration -- SAP + TIBCO

Similar Messages

Maybe you are looking for