Idoc configurations in PI7.3

Hi Experts,
For an Idoc scenario prior to PI 7.3, RFC destination, port, logical system and partner profile needs to be created in case of outbound Idoc scenario and again at XI side we need to create RFC destination, port and loading of meta data....
Is the same is applicable for PI 7.3 as well? since Idoc resides in AAE in PI 7.3, I believe there could be some changes applicable for these settings of Idoc....
Pls provide your inputs.....

Hi,
Along with the links provided by Phani and Gayatri you can laso refer this thread for IDoc configuration in PI7.3
IDOC settings from sap r/3 to sap pi7.3
IDoc Packaging in PI7.3
http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/4096a6b3-3dc3-2d10-bf87-f63d5340a916
Configuring PI 7.30 Java IDoc Adapter
PI/XI: PI 7.3 New Java based IDOC adapter's configuration (sender, receiver) - teaser
IDoc Acknowledments in PI7.3
acknowledge handling for IDOC_AAE in sap PI 7.3
IDoc_AAE acknowledgement handling in PI 7.3
IDoc related error in PI7.3
Processing error in Idoc_AAE sender channel
Hope its informative.
Regards,
Amol

Similar Messages

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

IDOC configuration in 46C for BI 7

Dear Experts
Is there a set of steps to create the idoc configurations in R/3 for data transfer between R/3 46C and BI 7?
After refresh, the idoc related configurations are lost and BI is unable to load from Source System R/3.
Thanks for reading and hope you can advise on the above.
Best regards
Pascal

Hello Pascal,
Maybe a thread in the PI forum would help you better:
Process Integration (PI) & SOA Middleware
Check the following thread:
Re: interface help
Regards,
Eduardo Rezende

ALE/ IDOC CONFIGURATION OBJECT

IT'S URGENT
I NEED AN OBJECT IN ALE/IDOC CONFIGURATION SETTINGS

Hi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM

IDoc Configuration steps

Hi Guru's
Can any one of you explain the Idoc configuration steps in brief with t.codes?
rgds,

Cherukuri:
<a href="http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli">IDoc Config Guide</a>
In case the link doesn't work:
Google this: "Axel Angeli SAP R/3 guide to Idoc"
Idoc Transactions:
Transaction Code
SALE:Display ALE Customizing
SM59:RFC Destinations (Display/Maintain)
BD64:Maintenance of Distribution Model
BD82:Generate Partner Profiles
WE20:Partner Profiles
WE21:Port definition
WE30:IDoc Type Development ( View Segments of an IDOC )
WE60:IDOC segment field description
WE19:Test tool for IDOC Processing
WE05:IDOC Lists
WE09:Search for IDOC in Database
BD87:Status Monitor for ALE Messages (Process IDOC manually)
BD73:Start Error Handling for Non-Posted IDocs
WEDI:IDOC and EDI Basis
Change Pointers:
BD50:Activate change pointer for message type
BD61:Activate Change pointer generally
BD52:Triggering table and field name
BD21:Creates and sends the Idoc for Change pointer method
BD59:Set the field for Filter in Distribution Model
BD95:Along with BD59 , used for setting a filter in Distribution model
BD60:Assigning FM to the outbound IDOC , and specifying Change pointer Table and Object
BD56:Segment Filtering
Inbound IDOC:
WE81:Create Logical message types
WE82:Assign Messages for IDoc Type
WE31:Development IDoc Segment
WE57:Assignment of FM to Log, Message and IDoc Type
BD51:Characteristics of Inbound FM
WE42:Creating Inbound Process Code
BD67:Function modules for Inbound ALE-EDI
Assign points if info helps Vj

Idoc configuration in IDES??

hi experts ,
Can somebody explain me about , how do we do entire Idoc configuration in IDES and we can execute the same as sample in IDES
Explain me in step by step for outbound and inbound ...
Thanks
Edited by: MM group on Jul 2, 2010 10:44 AM

1 Logical System
2 Assign Logical system
3 RFC
4 Port
5 Customer distribution model
6 Partner profile
7 CDM distribution
Tcode : SALE
First 2 steps not necessary ( Basis work already done )
Two logical system created
Ls110 -Sender
Ls800 - Receiver
RFC
RFC establishment SM59
Receiving system IP address or hostname
System number, client id
Username, password
Ports
We21 define ports
TRFC ale
File Edi
CPI_C - R2 connections
In the port we need to define Port name and RFC destinations
And version
Customer Distribution Model - BD64
Sender
Receiver
Message type
Partner profile we20 , BD62
Partner may be customer, vendor, logical system
In BD62 define the partner system (LS800)
One more additional entry SYNC for synchronization
Post processing Agent - workflow
MATMAS 03 03 is the version
Collect idoc we need to trigger
Transfer idoc will be send immediately
With message control
Which program need to run for generating the idoc
With out message control
For some of the programs have inbuilt idoc generation for that case no need to mention program name
Process code
Distribute CDM
Receiving System:
Partner profile is going to control all the thing
BD64 - > edit - > model view - > distribute
BD67 Function module assigned to the process code
BD10 used to create idoc for material
Master idoc generated only buffered
One master idoc multiple communication idoc
One communication idoc generated
We02 idoc satus

ALE and Idocs configuration

Hi Gurus,
Please tell me the ALE and Idocs configuration settings
Thnaks in advance

Hi,
Please refer to the details mentioned in the hyper-links beow.
You will get the details how to go about it.
To see the IDOC & status check it in WE02/WE05
You will get step by step process.
ABAP Development
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.geocities.com/xplosion78/customised_ALE_IDOC_BY_SACHIN_DABHADE.zip
http://help.sap.com/saphelp_45b/helpdata/en/35/b0ea5187a62488e10000009b38f9b7/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c4/6bc368fef411d28d0900104b56737d/frameset.htm
ABAP Development
Follow below steps to create custom IDOC.
1.Create segments through transaction WE31.
2.Create IDoc Type through transaction WE30 by attaching created segments.
3.Message type through transaction WE81.
4.Link Idoc and message type in WE82 transaction.
Check the transaction WEDI for ALE settings
Check these links for more details on IDoc's:
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi.jhtml
Hope this will help.
Regards,
Priyanka.

ALE/IDOC configuration study Material

Hi All,
Anyone come across ALE/IDOC configuration study Material which consists of
ONLY ONE PAGE. If YES, Please pass it on.
Points Assured \[but not given. Dont write such statements here anyway!\]
Regards,
Viji.
Edited by: Jan Stallkamp on Aug 6, 2008 2:26 PM

Hi Viji.
I can provide you a link which deals with precise material for ALE/IDOC configuration.
This link has just 1 page, but very good configurations.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wsadapters.jca_sap.doc/doc/csap_depl_config_serv.html
Inside if you want Outbound or Inbound settings, choice is to be made.
<removed by moderator>
Regards
Harsh
Edited by: Mike Pokraka on Aug 6, 2008 10:56 AM

ALE/Idoc configuration - (R3--XI--File)

Iam XI developer and know basic ABAP. Client is NOT using any Idocs right now. I have to develop a scenarios ( including ALE/Idoc Configuration on R3 for standard Idocs like MATMAS, DEBMAS, CREMAS etc ) both Master data and change pointer to XI and then to File.
Would some one show me step by step procedures for ALE/Idoc configuration on R3 and XI.I need to send both Master data and incremental data to XI possibly by bundling Idocs to XI.

Hi Ram...
Once the mapping is done then re-check the ALE settings.
SAP XI
1) RFC Destination (SM59)
 a) Choose create.
 b) Specify the name of the RFC destination
 c) Select connection type as 3 and save
 d) In the technical settings tab enter the details SAP SID/URL and system number#.
 e) Enter the Gateway host as same details above SID/URL.
 f) Gateway service is 3300+system number#.
 g) In the Logon /Security tab, enter the client user & Password details of Destination system.
 h) Test the connection and remote logon.
2) Create Port (IDX1)
 a) Select create new button
 b) Enter the port name as SAP+SID (The starting char should be SAP)
 c) Enter the destination client.
 d) Enter the RFC Destination created in SAP R/3 towards other system.
 e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
 b) IDOC Message Type
 c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
 a) Choose create.
 b) Specify the name of the RFC destination
 c) Select connection type as 3 and save
 d) In the technical settings tab enter the details SAP SID/URL and system number#.
 e) Enter the Gateway host as same details above SID/URL.
 f) Gateway service is 3300+system number#.
 g) In the Logon /Security tab, enter the client user & Password details of Destination system.
 h) Test the connection and remote logon.
2) Create Port (We21)
 a) First Select Transactional RFC and then click create button
 b) Enter the destination port name as SAP+SID (The starting char should be SAP)
 c) Enter the destination client.
 d) Enter the RFC Destination created in SAP R/3 towards other system.
 e) Save
3) Create Partner Profile (WE20)
 a) Create New
 b) Create the Partner no. name as same the logical system name of the destination system.
 c) Select Partner type LS
 d) Enter details for Type: US/USER, Agent, and Lang.
 e) Click on the + button to select the message type.
 f) Select Partner no. and LS which ever create above.
 g) Select Message type
 h) Select Process code related to the Message type.
 I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Cheers,
raghavesh

ALE/IDOC CONFIGuRING

Hi ,
can any one send me step by step ALE/IDOC Configuring please it is very important for me..
Thank's in advance..

hi,
check all the below links.......
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
For ALE -- IDoc's
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
ALE/ IDOC/EDI
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
for MM
http://help.sap.com/saphelp_nw04/helpdata/en/78/217da751ce11d189570000e829fbbd/content.htm
one more good link
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
~~Guduri

IDOC configuration Issue

HI All,
I am getting the following error Unable to Convert Integration Process into ALE Logical System... Even though i defined LS in Business Landscape and also In Adapter Specifiers of Business System...
I have gone through all the weblogs and threads in the forums related to this topic, but still I am confused with the steps to followed.
I am workinng on a BPM Scenario where from Legacy system, I will be sending Order Details to XI and From XI (BPM) to R/3 through IDOC adapter...
So Say XISERVER is the Client 600
And SAP R/3 is Client 800
Please Can u tell me the steps to be followed i.e ,
In which sys .to define Logical Systems, RFC and where to create Port..
Actually i created a Logical System in Client 800 (IDS800) and also the same in Client 600
Now please can any one provide me steps to be followed in detail....
Points will be rewarded......
Regards,
Sridhar

Hi Micheal,
I have already done header mapping as mentioned by you. Our total scenario is as follows:
We have a outbound-asynchronous interface, an abstract-asynchronous interface mapped to the IDOC ORDERS01. Our integration process has a simple recieve and send step. In the configuration part we have done Reciever Determination for file system to BPM and from BPM to R/3.
we also imported Integration process from IR and here we have the same Abstract interface as sender and receiver .. Is this any prob..?
After that we have followed all the steps given in the How to Document on IDOC adapter congfiguration. We have searched through lot of posts in form and tried all the suggestions.
Pls help us by giving some sequence of steps or snap shots to my mail ID ([email protected])...
Thanks and regards,
Sridhar reddy
Message was edited by: sridhar reddy kondam

IDoc Adapter - Logical System - File to IDOC configuration

I have a scenario reading a File ->XI->IDoc in R/3. I'm looking to have the control record parameter for SNDPRN reflect the Environment dealt with. I unchecked the 'Apply Control Record Values from Payload' & 'Take Sender from Payload' boxes but the problem I'm getting is that the system is reading from the business service (IDoc Adapter - Logical System) and feed it in the Partner Profile in the IDOC. This means that I should all the time redefine 3 this Logical System in config before transporting my scenario from DEV/QA/PRD. Any idea how I can avoid this kind of 'hardcode' ?
Thanks

Hi,
Why u r using three different LS can't u use only one LS and send all the IDOCs to same LS. That will ease ur task.
Do let me know why u r going for three different LS.
In the file r u getting any data which will help u to identify that this file is for which LS. IF that is the scenario then u can use the value mapping and based on the value which is coming in file u can map it to the IDOc filed which u have mentioned and in the configuration it will take the respective configuration.
Thnx
Chirag

Partner Profile for IDOC - configuration

Hi..
I have an inbound IDOC TPSSHT01, which has been extended by adding a Z segment.. But I keep getting an error message.. The IDOC is created with status 56 and the message says "No inbound profile found".. I have configured the Inbound profile to include the message type 'SHIP' in WE20 and also added the message type in WE57 and WE82... Do i need to do any further settings?
Thanks
Rishi

hI,
Please use transaction code WE20 to generate inbound partner profile
Goto WE20 transaction of the client 200 where you are posting the idoc and maintain the partner profile for the inbound type for the idoc type and the corresponding message type of SHIP. This is because you would have maintained it as the outbound parameter from client 100. But at the receiver end also you need to configure the same.
Status 56 comes up when the partner profile for the idoc type is not maintained. Once its maintained, the idocs which you post will go into 53 if its successfully processed and to 51 if its failing due to any inbound processing program validation
*Reward points
Regards

IDOC Configuration in XI Server

Hi,
i need to send idoc(MATMAS03) from R/3 server to XI server.
In XI server i've done the following configurations:
1. created a logical system for XI server and R/3 server
2. Created a RFC destination for R/3 server
3. Created a port for IDOC adapter using t-code IDX1.
4. Imported the metadata of MATMAS03 idoc into XI server using tcode IDX2.
Configuration done at R/3 server:
1. created a logical system for XI server and R/3 server
2. Created a RFC destination for XI server
3. Created a logical port for R/3 and XI server using t-code WE21.
4. Created partner profile for R/3 and XI server using t-code WE20 and maintained MATMAS in outbound parameter of both the partners.
Now i'm sending idoc from R/3 system using tcode WE19. In tcode WE02, the status of the idoc shown is "IDOC send to the receiving system/program.
But when i'm checking tcode WE02 in XI system, its not showing any inbound idoc.
Do i need to maintain partner profile in XI system also?
Any help will be highly appreciated.
Regards
Manpreet

Hello Manpreet,
Lets say ur R/3 System is D10 and XI is P10.
Configuration on R/3 Side.. sending system..
1.Create a Port SAPP10 with RFC dest to XI in R/3. WE21
2.Create a Logical System Type LS in R/3. WE20
This logical system is for XI so in you Integration server in SLD Logical System name should be same.
That will do for R/3.
Now for XI..
1. Call Transaction IDX1.
Create a port with name SAPD10 and an RFC dest to R/3.
Now go to WE19 in R/3 take a successful IDOC and display the same.
Doubble click on EDIDC and enter Sender/Receiver Port/Partner Number.
In your case..
Sender: SAPD10.
Partner: xxxxx
Receiver: SAPP10 created above
Partner: xxxxx created above
Partner Type: LS.
And start outbound processing.
Goto SM58 and check ur TRFC if no messages apper you are successful in sending the IDOC else correct and resend.
Let me know if you were successful..
Regards,
Sri.

EDI IDOC Configuration steps

Hi,
Can anyone provide me the step by step configuration of EDI IDOC ofr both incoming and outgoing mainly for PO.
Thanks
Regards,
Srivatsan

hi,
Refer SAP Note No. 455140
Refer SAP Note No. 546147
Refer SAP Note No. 607108
Refer SAP Note No. 779972
May be it will help you
Thanks & Regards,
Kiran

Idoc configurations in PI7.3

Similar Messages

Maybe you are looking for