IDOC CREMAS.CREMAS05

Hi All
BUKRS is a field in CREMAS.CREMAS05 IDOC is it a mandatory field?
If yes then what value i have to give?
Warm Regards
Dheeraj Kumar

Hi Dheeraj,
Its mandatory field that represents the COMPANY code and the value it takes will be CHAR (Eg.1000).
If you want to chek wether its mandatory or no.Log on to R/3 ,Go to WE30 and give Message type CREMAS05 > Display , check the segment E1LFB1M>E1LFBWM, Double click on it.You will see filds in it BURKS , click on the field and chek the attributes of it.
Functional consultant can help you out with the list f values.
Thanks,
Ram.

Similar Messages

IDOC to file but source 2 Idocs (CREMAS and ADRMAS) send PI as single file

Hi All,
I have scenario IDOC to file but source I am getting 2 Idocs (CREMAS and ADRMAS).I want merge these 2 idoc and send to single file to target. I am working on PI 7.11.Please proved your inputs.....
Regards,
Ramesh

Hi,
Thanks for your reply!!
Is there any way do with out BPM using multimapping?
Regards,
Ramesh

In exit EXIT_SAPLKD01_001 populate custom segment of idoc ext. cremas05

Hi,
I am using EXIT_SAPLKD01_001 where I need to populate 2 custom segments for idoc extension cremas05.
I have created a function module separately where I have populated the 2 structures that is of same type as the segment structure.
In the exit I have called the function module where the structures are populated.
Now my question is how to populate the custom segments from the function module structures directly in the exit.
Thanks and Regards
P

Hi
Now I'm able to do this.... closing the thread.

IDOC CREMAS - withholding tax

Hi Experts,
i need to distribute idoc CREMAS with data related to "withholding tax"
(table LFBW).
When i distribute this idoc i can not see these data in outbound, do you know if i need to do something special to aktivate this part? and do you know what is the segment related?
how can i send these data with the whole IDOC CREMAS?
Thanks for your help
Boris

Hi lakshimiraj
I'm sorry but i never fix this issue becouse the process was changed and no need to distribute whitholding tax.
Any way i think you are right, you need to exted IDOC creams with custom segment then you will update the new segment in outbound and in inbound you need to update the new fields.
You can try maybe with these exit EXIT_SAPLKD02_001 (ENHANCEMENT VSV00001)
good luck
Boris

IDOC CREMAS

Hello,
i need to replicate idoc CREMAS to another R3 System, the idoc is triggered correctly but it contain only segment E1LFA1M and i need also the segment to update table LFB1 (company) E1LFB1M plus all other segments .
i can not understand why.
any Idea??
Cheers Boris

Issue fix!!
(wrong userexit was implemented)

Populating Street2 and Street3 through Idoc CREMAS

Hi
Is there a way to populate the fields Street2 and Street3 while creating a vendor through the idoc CREMAS05?
Thanks
Nag

Look for an exit when posting IDOC and use this to populate any additional fields.
Try ACCID001, ACCID002 or search for BADIS.

Mapping Street2 and Street3 through idoc CREMAS

Hi
Is there a way to populate the fields STREET2 and STREET3 through the idoc CREMAS05?
Thanks
Nag

Hi Kris
Thanks for the info. But i could not find any table structure in the BAPI_BUPA_ADDRESS_CHANGE fn which holds the STREET2 and STREET3. Can you provide further info?
Thanks for your inputs so far.
Nag

Vendor Master IDOC (CREMAS) and change pointer activation..

Hi Guys..
I am using CREMAS idoc to transfer Vendor Master data to 3rd party system..
I configure the change pointer in SALE..
BDCP
BD61
BD50
BD52
But when I make changes in vendor master.. its not creating the idoc immediately.. I have to run RBDMIDOC manually.. to create the idoc..
How to make it create immediately.. ?
Also if I make a change in Email.. its not creating idoc at all.. !
Thanks for Ur time..

posting it in data transfer forum..

Standard program for uploading of IDOCs - CREMAS

Dear SAP gurus,
I would like to ask you if there exists some standard program for uploading IDOCs messages - type CREMAS (Vendor master data).
Thank you in advance.
Alena

Has not been solved.

IDoc CREMAS - Email field

Hi experts,
please help me to understand this:
i have a log in changed data of XK03 --> address
Date Field New Old
XX.XX.XXXX E-Mail Address ***Deleted*** [email protected]
Now, there's a CREMAS idoc in the same date and same time, with the same user of this log.
So it was probably this idoc to make the change.
but how is possible if the idoc not have an email field?
No code in EXIT_SAPLKD01_001
Thank you in advance.

You have to process ADRMAS Idocs too otherwise you may get inconsistent data.
I explained the history and the connections in Addresses and master data - ADRMAS - CREMAS - DEBMAS

Idoc CREMAS.CREMAS04 in update mode

Hi,
I have some vendors who are already created in my ECC, and I must to update some fields of his basic data by using an inbound IDoc (sent by XI).
My question is: is it possible to CHANGE only ONE value (e.g NAME1) without to give all mandatory fields (like Account group, city, zipcode) ?
My idoc is CREMAS.CREMAS04.
In my IDoc segment, I use option E1LFA1M-MSGFN = 004 (change)
In my partner profile, I use "CRE1" for process code.
Regards.
Mickael

Hello Mickael,
I have the same issue. I would like to import from Legacy some data but I also DON'T want to update one field. How to you set it as exception for not updating the supplier please?
Thanks in advance,
Génia.

Generating partner profile for File to Idoc(CREMAS) scenario.

Dear friend,
Completed all the steps in SLD, IR and ID.
I do not know how to create Partner profile and I skipped this step.
While testing I got the error "Unable to convert sender service to an ALE logical system".
I think i got this error because I have not created partner profile.
Could anybody tell step by step process of creating partner profile including logical system names( Sender and Receiver)?
I have seen many blogs and i couldn't get clear picture on how to generate partner profile.
My sender system is XI server and receiver is R/3.
I have created RFC destination, Port also.
Thanks in Advance
Chiru

generally u create partner profiles using transaction WE20.
SAP Menu -> Tools -> IDoc Interface/ALE -> Administration -> Runtime Settings -> Partner Agreement (WE20).
go through this link for step by steps
http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
http://www.thespot4sap.com/Articles/SAP_ALE_Configuring.asp

Error in IDOC CREMAS for Bank data

Hi,
I am trying to upload vendor master through IDOC.I am also sending bank data in my IDOC.But it gives the below error
Fill all required fields SAPLBANK 0100 BNKA-BANKA
We have created the bank and details exist for that bank.
We are giving Bank Country Key,BANKKEY and BANKACCOUNTNUMBER details in IDOC.
When I have Reprocessed the IDOC thru WE19 in Foreground mode It goes to bank screen twice.First time the okcode is 06 and second time the okcode is 16 which take the control to other screen where it ask bank name.But Bank name already exist for that bank.we are not giving bankname from the idoc.
Any help appericiated.
Thanx.
Rekha.

Sidenote because this thread is one of the first results in google when searching for "SAPLBANK 0100 BNKA-BANKA":
Please have a look at [SAP OSS Note : 697492 ALE: Bank master data updated - DEBMAS|http://www.google.de/url?sa=t&rct=j&q=sap%20oss%20note%20%3A%20697492%20ale%3A%20bank%20master%20data%20updated%20-%20debmas%20&source=web&cd=1&ved=0CB4QFjAA&url=http%3A%2F%2Fforums.sdn.sap.com%/community [original link is broken]%3FthreadID%3D2047770&ei=PDbWTv6OK4eJhQeY2tlZ&usg=AFQjCNGnp_ieUhM9jNZi9Rd-s-N9i1FNpw&sig2=pmD56XZs_GAtNI3zMsJPLw&cad=rja]
Regards
Martin

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

How to populate extended fields of VENDOR MASTER IDOC (CREMAS05)

Hi,
I have appended a new field to table LFA1 and the same has been placed on the screen. I have extended the basic IDOC type CREMAS05 to accommodate the newly added custom fields. Now when the vendor is created using IDOC how to populate these custom fileds. As the standard IDOC FM is using BDC to create the vendor. Please help.
Thanks,
Satish

SAP uses function module ADDRESS_INTO_PRINTFORM
this has usually 10 lines for the complete address, so that it fits into the window in an envelope
If you address has more than 10 lines, then SAP reduces this lines to 10, by skipping some of them.
Read details in docu:
http://help.sap.com/saphelp_nw04/helpdata/en/18/c042e1da4811d3b571006094192fe3/frameset.htm
(open the menu on the left to navigate to the fomatting of the street.

IDOC CREMAS.CREMAS05

Similar Messages

Maybe you are looking for