IDOC Current status

I have created a PO, and it is released also. when I check in Outbound IDOC current status showing as 03, but it should show 41 for medium 6 EDI. Please help.
Regards
Ajit

Status 03 means from your system idoc successfully transmitted.Status 41 means application document created in receiving system.In your case this is not happen.,So your idoc is not received in your system.Please check with interface team is the idoc stuck or in receiving system is there any data missing.

Similar Messages

  • Get the current status of IDOC

    Hi,
    I want the current status of IDOC.
    Is there any function module through which i can get the current status of IDOC?

    Hi,
    Use function module "FTR_IDOC_READ", Output structure "PE_IDOC_STATUS" holds the current status of IDOC number
    Regards
    Vinod

  • Performance issues in using RBDAPP01 for reprocessing iDocs with Status 64

    Hi All,
    I am using the Standard ABAP Program 'RBDAPP01' for reprocessing Inbound iDocs with Status 64 (Ready to be posted).
    When this is scheduled as a job in background, I find that it opens multiple sessions and occupies all available dialog sessions.
    This in turn slows down the entire system.
    Also, I find the addition 'Packet Size' on the selection screen for the program.
    Is it related in any way to the number of sessions the program creates?
    Any pointers in resolving this issue will be extremely helpful.
    Thanks in advance.
    Regards,
    Keerthi

    Hi,
    When you mention Parallel Processing, it becomes active only if I choose that particular option on the selection screen right?
    In my case, I haven't chosen parallel processing, but still the overall system performance seems to have fallen very badly.
    Now please correct me if my understanding is wrong.
    If I increase my Packet Size, it should improve the system performance, but will increase my runtime for the selected iDocs.
    But as I have not selected parallel processing in this current situatuon, it should not have any impact here.
    Have I summarized it rightly?
    Thanks in advance.
    Regards,
    Keerthi

  • Aggregated IDOC partly Status 51

    When dealing with aggregated inbound IDOCS the Status 51 can be seen about 10% of all Status- Sets for different reasons. The worst is: The Switchdoc is currently block by <TheRCFUser> (here having EDIFACT/UTILMD/E03)
    After that the complete Message won't be processed any further.
    Is there a way to easily restart this IDOC for those segments with Status 51 (or better: for all segments not having 53 so far).
    Maybe with the option to change the IDOC- Data before reprocessing (in case there is some stupid mistake like , instead of .)
    Anybody facing the some problem and having a solution?
    Regards, Daniel

    Dear Math,
    Have you got the solution for the above. If you get can you tell me please because even i got the same error message while processing the IDOC
    status 51 after status 53. Outbound delivery is updated but not the sales order.
    can you please help me

  • Processing idocs with status 8

    hi friends,
    how to process idocs with status 8

    Hi,
    Chek this thread which contains step by step procedure to process Idocs
    mannualy process idoc
    Also try these steps
    1. Goto Infopackage
    2. Click on the "Details" Tab of the Infopackage
    3. Goto Datapackage which is currently process
    4. Under the detail tab you can see
    Date, Time, Record... in that you can also see IDOC#
    5. Take the IDOC# and goto BD87 of the Sourcesystem
    6. Paste the IDOC# against IDOC
    7. Give IDOC Status = 64
    8. Give Partner system = "Your Source System"
    9. Execute BD87.
    10. You will navigate to next screen
    11. Maximize all by using "Expand Subtree" button on Menu
    12. You can see "IDOC stauts " column with 64
    13. Click on the row against to 64
    14. Click button "Execute" on Menu.
    15. Your IDoc will start processing
    16. If it success IDoc status will be turned to 53 else to 51.

  • IP Job in BW finished, but how can I check the IDoc receive status in BW ?

    Hi,experts
    After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
    And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
    and how can I do now ? or how can I check the IDoc receive status in BW side?

    Hi,
    I too had the same problem, i executed the following to solve the proble, may be this will help you:
    1) Go to T-code SM58 and select TRFC and press F6,
    2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
    Thanks,

  • How to cancel an idoc in status 64

    How to cancel an idoc in status 64

    Hi Manju,
    If you have table updation access then
    Go to SE16 --> Table EDIDC --> Give your "IDoc number" -->  change the status from 64 to "73 IDoc archived".
    Or you can ask to your ABAPer to do that.
    Hope it helps,
    Regards,
    MT

  • STPPOD Idoc creation status : Error in ALE Service

    Experts,
    I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
    When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
    Status Message for Selected IDoc
    Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
    T100 Text:     Entry in outbound table not found
    While i have properly configured Partner Profile for  Message Type STPPOD :
    Partner Role          Basic Type     Receiver Port           Application     Output Mode
    LS        DELVRY03       A000000018 (XI port)           GRN               Transfer Idoc Immediately
    When i try WE19 t-code for this idoc, i found  the error "Port '' does not exist in the table of port descriptions"
    while  i have already defined port (A000000018)in WE21 t-code  and this port also working fine for other messages.
    Please suggest.
    Thanks.
    Regards,
    Pawan Keshwani

    Nikhil,
    Issue is resolved it was the wiered error. As i removed LS from the field  Partner Role in STPPOD message at  partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
    Thanks.
    Regards,
    Pawan Keshwani

  • Current Status report not updating

    Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong.  Usually I can get the "Current Status" back to being accure by going to File/Refresh.  In the past when something changed the status, like a restart taking the system off line for a few seconds, the current status would update back to Available once the remote computer completed its reboot.  Now however there is about an equal chanve that the status indicated in ARD will or will not update automatically when the status changes.  If the status remains at ARD Not Available or Sleeping or something else ARD will not control that system till I manually do a refresh and then initiate the new action.
    This is more of an irritant than a major problem but it sure would be nice if I could get ARD back to correcting and updating the indicated status correctly.  This is with the 3.5.1 ARD Admin software.  Any Ideas?

    A few things I would suggest you do to determine where the problem lies.
    1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
    2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
    Good Luck,
    -John

  • SAP IDOC shows status 03, but no file is written

    We have SAP configured to generate delivery IDOCs when the SAP Delivery document is posted/saved. The IDOC is initially created with status 30. There is batch job RSEOUT00 every 30 mins that collects the IDOCs in status 30 and converts to status 03. When we review the IDOC processing screen, even though they are in status 03 and successfully written outside of SAP to a folder, there is no file in the folder. We are missing IDOCs. There is no real time external system integration. We are simply trying to write IDOC files to a folder.
    Can you some please share your insights on how to resolve this issue?
    Thanks in advance
    Satish

    RFC destinations, Logical systems, and then Partner profiles needs to be maintained. and You need to create the Distribution model  in sender system.
    Partner profiles maintained in both the systems, soure Outbound properties
    Target Inbound properties.
    if you have two clients in system it will be easily you can check.

  • 5 IDOC with status 29 Error in ALE service

    hi there,
    im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
    IDOC Status Outbox:
    IDOC failure between 13/07/2008 to 14/07/2009
    1 IDOC with status 02 Error passing data to port
    5 IDOC with status 29 Error in ALE service
    IDOC Status InBox:
    88 IDOC with status 51 Application document not posted
    regards
    raju

    Hi,
    Check this thread.
    DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Regards.

  • Idoc- can we sent already sended idoc if status is showing error message

    hi
    Idoc- can we sent already sended idoc if status is showing error message
    without making any changes.
    Thanks in advance.

    Hi raja,
    IN BD87.
    give the idoc number,its status,messagetype and partner system and resend it.
    Regards,
    nagaraj

  • Query on IDOC Ack (STATUS) config in XI for a specific partner comm.

    Hi Experts,
    Is it possible to configure the IDOC Ack (STATUS.SYSTAT01 message) in XI for a specific partner communication? We want to configure our system like ALEAUD but the message type should be STATUS.SYSTAT01 and the acknowledgment should be send to sender system for a specific partner only if XI receives any IDOC like (Orders) from that specific partner. For other partners (same sender system) we donu2019t want this acknowledgment settings and configuration. If possible please provide the configuration filters steps etc. Thanks for your valuable inputs in advance.
    Thanks,
    Satish
    Edited by: Satish Jaiswal on Jan 8, 2009 2:55 AM

    Hi Husain,
    I have the document you have mentioned. Please note my requirement is to filter the Ack while creating and sending to R/3 based on Partner and Message type. The document provides info only on Message type filter but not parner specific for same sender system!!! Any help appreciated. Also note: BPM and Alert is out of scope.
    Looking for  some ALE configuration tricks to achieve this.
    Thanks
    satish
    Edited by: Satish Jaiswal on Jan 9, 2009 2:40 AM

  • Current status of PO or SC

    Hi all,
    We use normally CRM_JEST or  BBP_PD_STATUS_GETDETAIL FM to get the status of SC or PO. But it contain all the status.
    I need only the current status of the PO or Sc. Is there any table i can get current status or FM ?
    Thanks in advance,
    Neelima.

    Hi,
    Please use FM BBP_DOC_STATUS_GET to get the current status of shopping cart.
    Inputs: SC,PO guid, All the status in the CRM JEST table.
    Output: Current Status of the Doc
    Hope this helps.
    Regards,
    Sheetal.

  • Standard report Programs to find the current status of workflows

    Hi Experts,
                       Are there any Standard report Programs to find the current status of workflows or workflows which are pending.
    Regards,
    Hari

    Go to SWI1 t-code
    Give the appropriate Status - Ready or Inprocess or Waiting
    Input the Task - either WF Template or Standard Task.
    Choose the time period and execute the report.
    Regards,
    PR.

Maybe you are looking for