IDOC Custom Fields are not coming in MII

Hi Guys,
I am receiving Standard IDOC (MATMAS) with Custom segment. Custom segment having two Z-fields and One Standard field. While fetching the IDOC at MII end, I am able receive IDOC except Z-fields, Custom Segment is coming perfectly with the one Standard field but missing Zfields.
I'm using MII 12.1.5 Build(92). Please provide your suggestions on this issue.
Thanks!

Check if your MII is capbale of reciving the custom fileds. check mapping on sender and reciver side if z fileds are mapped correctly.
Check and evert,
Santosh Sarda

Similar Messages

PO screen custom fields are not in correct order

Hi Experts,
After creating Shopping cart and purchase order successfully created.
Added my custom fields for PO structure INCL_EEW_PD_ITEM_CSD_PO fields are visible in PO screen automatically with out adding my custom fields in PO layout /SAPSRM/WDC_DODC_PO_I_BD
when i go to PO screen i can see my custom fields but all fields are not in correct order.How can my fields should be in order.
and i added two custom buttons in my PO layout for WD component /SAPSRM/WDC_DODC_PO_I_BD i am not able to see my buttons?
Could you please help me out in this issues its urgent.
Thanks,
Venkatesh G

I've had this problem. There may be a more elegant solution, but what I do is make a playlist of the album and put the movements in the correct order in the playlist. I've also put numbers (01, 02, etc.) in front of the name of the movements. Either one works.
Hope this helps.
Ben

Custom fields are not appearing in BP

Hi Friends,
My requirement is to add a new fields in Business partner(TCode:BP). For this I have created a new tab using Business data tool set by following every step. I have regenerated the screens also(using Tcode:BUSP). But after executing the transaction I am able to see the tab but not the fields. Fields are not appearing in the tab. What might be the reason?? Kindly clarify me.
Regards,
Steve

Hi,
For this purposr you have to use EEWB enhancements to add field to your new tab page.
Regards,
Amol Tambe.
SAP CRM Technical Consultant.

All fields are not coming in view

Hi,
I have created a view with 6 fields but when i am accessing it with SM30 only first 4 fields are showing (key fields) not the last two fields.
how to display the all fields.
thanks

Hi
May be the problem is you have done a 2 screen table maintenance. First screen in table control will display only the key fields. When you select that row by double clicking you shall be displayed with the other two fields.
~ Ranganath

Customer prices are not coming correctly!!!

Hi Experts,
Question: "Changes made in customer prices in ECC, how it gets replicated to ECO ISA application?".
We have maintained customer specific condition records in ECC. Also, list prices have been maintained in product catalog.
WIth replication of product catalog to TREX, we can see latest list prices in webshop product catalog.
But changes done in customer specific pricing condition records are not appearing in web shop.
Now, If we restart VMC then we can see latest customer prices in web shop. But this is not solution as we cannot restart VMC on every change of customer pricing condition record.
Please explain process on how webshop access customer pricing condition records?
(We know that webshop gets prices with using pricing procedure determination using rfc call, then why it could not able to access correct condition record after change in condition record?).
Please help.
Thank you,
Dhanraj

Dear Friends,
                Thanks for your reply. In copy control from delievery to billing,settings are as follows,
         Pricing type:- G
         Coping requirement:-004
         Data VBRK/VBRP:-007
Users enter prices manually when they prepare sales order.Condition category is empty in condition type.
Looking forward for your reply.
Regard,s
Abhijeet

Custom fields values not saved in AUFK using bapi_alm_order_maintain

Hi ,
    We have a requirement where we have to update the custom fields in enhancement tab of IW31 using bapi_alm_order_maintain.
We are able to get the successful creation of work order ,but the custom fields are not updated in enhancement tab aswell in aufk table. We are passing values in below table of bapi.
EXTENSION_IN
            STRUCTURE           = CI_AUFK
            VALUEPART1        = '20091223' .
Please provide the solution.

Hi Phani,
May be these links are helpful:
BAPI extention to work order aiming AUFK custom field filling
Update custom fields in MARA (BAPI_MATERIAL_SAVEDATA)
Also search sdn using the BAPI function module, you may get some idea.
Regards,
Swarna Munukoti

Customer fields do not display in cProj 4.5

Hello,
I am trying to customize customer fields with the 'Define Field Groups for Customer Fields' IMG activity
I am using following steps to do this:
1. Enhance database tables for customer fields
2. Create field groups for customer fields
3. Assign customer fields for fields groups
4. Define fields groups per project type
5. Save and open cProjects
But when I start the application only the main tab and sub tabs can be seen. Other customer fields are not seen.
Does someone has an idea what is going wrong with it and where I can start searching the problem?
Thx, Vanessa

Hello Vanessa,
there is one more step that needs to be done in the customizing:
You have to set up a field control for your customer fields (IMG activity 'Set Up Field Control'). Here you define the conditions when these fields are displayed, hidden etc...
If you have no field control, these fields will be always hidden.
Please do not change the standard field control 0SAP but rather copy it to your own and adapt it according to your needs. Please refer also to the available IMG documentation.
Afterwards, this field control needs to be assigned to your project type (IMG 'Define Project Types').
Regards,
Silvia

Excise duty are not coming in utilization

Dear All,
Some excise invoices are not coming in utilization (J2IUN), what possible reaosn is there and how I can
resolve this. Plz advice.
regards,
SP Shukla.

Hi
In J1IS transaction code first give all details like
1) Ref document type
2) Doc Number
3) Doc Year
4)Series Group
5) Excise Group
6) vendor or customer press enter
then click on insert line (shift +F6) fill all the fields now .
Thanx

Field is not coming in selection screen

Hi all,
In one of my report there is a field customer group in selection-screen. Report is working fine so i transport request to qas in qas that field is coming on selection screen and its working fine.
But when i transport same request from qas to prd that field is not coming on selection screen.
I try 2-3 times by making diffrent diffrent request but still same result. can any body please tell me why its happen in prd??
regards
Ankit

Hi,
What i would like to suggest u that u need to first
is u have to convert the R/3 Production systems into the Quality one
try using tcode BDLS
read the documentation of BDLS.
hope this helps u !!
thanks
ravi

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Using Screen Exit AMPL0001 in TCode MP02 but fields are not showing.

Hello SAPients!
I created a project, added the enhancement AMPL0001, included some test fields in the subscreen, activated components and project but when I run the transaction where my custom fields are supposed to be shown this is not happening. None of my fields is displaying just the rest of fields that already were there.
I have reviewed what can be the differences between my fields and the others but I don't see any.
What am I missing?
Thanks in advance for your kind help.

Hi Klaus,
Thanks for your reply. Yes, I'm sure, I have reviewed several times. Actuallly I deactivated and reactivated my project a couple of times before you mention, now I did it again and I get the same result.
A couple of questions:
Is it normal that the new fields I add to the subscreen are grayer than the rest of fields?
Is it normal that the status of the subscreen is shown as "Modified/Activated" instead of "Activated"?
Thank you.

Tax classification fields are not appeared in master data

Dear Experts,
I searched the forum about my issue but i did not get any solution.
I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
FYI
I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
EX:
AT MWST
DE MWST
But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
Note:Country of plant,company code and sales organizations is IN
Help me to view tax classification fields in Master data.
Thanks&Regards
Ravikumar.R

Then how system knows this customer is liable for JLST.
In customer master, under the Taxes tab, it would be like
Country::::Name:::::Tax Cat.::::Description::::Tax Classification
While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically. You just have to input tax classification as 1, 2 etc.,
Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
G. Lakshmipathi
ps: please spell the name correctly

Yeild and Activity Types are not coming on confirmation

Dear Sir's
Hope everyone fine by the grace of GOD.
Friends i am facing a problem while doing Confirmation of production order in T.Code Co11n .Yeild(net production) is not picking from the Production order and also Activity types are not coming while doing confirmation.
please help me out in this problem
Best Regards,
HAFIZ ABDUL HASEEB KHAN
SC.PP Consultant

Dear
There are 3 possibilities to populate the activity and yeild field:
1) The system can propose them based on quantity, using the standard
formula, directly after entry of the operation being confirmed please check it in your order first
2) The system can propose them at the time of saving
3) They can be manually entered ~ however using this option, formula
will not recalculate using the settings from the Standard value key,
set for the work centre.
To set one of the above as default in customising, follow these steps:
- Call transaction OPK0
- Select the default Confirmation Profile SAP001 is being ticked marked. - Default Values , Qty and Service in OPK0
- Select the Default tab and set the default for Quants and Services
to 'Immediate Proposal' or 'Propose When Saving'
These options allow you to choose whether the activity and yeild proposal in
C011N is given immediately after entry of the operation to be
confirmed or upon saving the confirmation. However note that if
you subsequently override these proposals by maually entering activity
details, the formulae will not be recalculated and manually entered
data will take presidence.
Hope this is clear
Regards
JH

Presence the phone and mobile field entries not coming from LDAP

I tested by changing name and all...working fine changes happening
But the phone field is not coming at all
ANY IDEA????

I'm sorry if I misunderstood you. But it looks like there's some confusion here.
Confusions and mistakes are usually caused by false assumptions.
CUPC gets LDAP attributes from LDAP directly. CUPC does not retrieve those attributes from CUPS.
If you're troubleshooting double-click on CUPC, the CUPS presence viewer doesn't help at all.
When you double-click a contact in CUPC, CUPC dials the number in "BusinessPhoneNumber". By default "BusinessPhoneNumber" is mapped to "telephoneNumber" in Active Directory.
If you cannot double-click a contact to dial, that's because "BusinessPhoneNumber" was blank.
Michael
http://htluo.blogspot.com

My Customized Workflows are not triggering

Hi All,
I customized workflows.But in SWEL my all customized workflows are not triggering from the last two days..Before it was working..In SWE2 also done properly and SWU3 also fine.
Please give suggession whereis the Problem?
Regards,
Soni

If you look at the details of your event linkage entry (transaction SWE2) you will find that the "Check function module" field is not empty. The function module, when executed for the event you created, raised an exception - which is the standard way for a check function module to prevent a workflow from starting.
The check function module could be one set up for a workflow start condition, namely SWB_CHECK_FB_START_COND_EVAL. If so, check the workflow start conditions for your workflow (transaction SWB_COND).
Otherwise, examine the check function module's code to determine what it checks and why it prevents your workflow from starting.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b027453d11d189430000e829fbbd/content.htm">SAP documentation: Using (event) linkages</a>

IDOC Custom Fields are not coming in MII

Similar Messages

Maybe you are looking for