Idoc DEBCOR - Extend use to Business Partners and customise

I am writing a high level technical design document on a new interface for my current client. We are currently in the scoping/blueprint phase.
We will be implementing CRM(?), ECC 6.0 and PI7.0
I have been tasked with writing/creating an outbound interface from CRM/ECC to send Business Partners from ECC to an external application via PI. Preferably using standard SAP functions/transactions!
Can I use the DEBCOR Idoc and customise/add the additional segments I require for the additional fields for this interface?
I was hoping to use BD12 (send Customers - Master Data Distribution) as well, but unfortunately, I do not have a sandpit/development system to use yet as we are still "blueprinting", therefore I am unable to test my assumptions before finalising the HTD document.
If DEBCOR cannot be used is there any logic in use the ADRMAS anc customising this?
I was hoping to use change pointers as well, but I guess once I have the Idoc configured, I can work out the distribution model in BD64..
Has anyone sent Business Partners from ECC and if so, what methods were used?

I am going to try and see if BusinessPartnerDataManagementBusinessPartnerEventOut.informBusinessPartnerAsBulk fits my requirements.
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/render.asp?applytx=&id=86162F8CD62011DB2B24000F20DAC9EF&fragID=&packageid=DBBB6D8AA3B382F191E0000F20F64781&iv=

Similar Messages

How to restric the use of Business Area and Plant in PTC module

Hi Expert,
I am facing a problem with restricting the use of Business Area and Plant in PTC module.
In this project we are trying to controle the user access or transaction as per the Business Area and Plant.
We have applied same authorisation in the PTF module.
Please help me if there is any authorisation object which give Plant and business area restrictions for all the transactions.
Note: We have already inserted two authorisations object manually -
1) F_BKPF_GSB
2) A_IMPR_GSB
but it's not working, is there any other way to restrict all the trasactions as per the Business Area and Plant.
Regards,
Venkatesh

Hi,
have you done OMJ7?
Anyway you can assign plant to Branch and restrict by Validation rules (GGB4)
Regards

Mapping Between Business Partners and Customers in CRM and ERP

Hi,
I wanted to know how are the business Partners and Customers replicated from ERP to CRM systems and Vice Versa. I would also want to know how can i check this mapping in the tables.
eg: Get a customer or BP from the ERP system, how do i find it in CRM system.
Regards,
Rishav

Hi Rishav,
Here is how it works.
The table for customers in ERP is KNA1 and the field for customer number is KUNNR.
In CRM the table CRMM_BUT_CUSTNO contains the mapping between customer number in ERP and the BP GUID
in CRM. The table BUT000 in CRM contains the mapping between BP GUID in CRM and the BP Number
Apart from that the table CRMV_BUPA_CUSTNO contains the mapping between Business Partner Number and Customer.
Hope this clarifiies your doubt.
Best Regards,
Shourav.

Incomplete information in report listing of Business Partners and Items

Hi
Our Client requests for Standard reports on Business Partners and Inventory Item Masters records to include all availabe fields that was entered into the Master Profile.
Kedalene Chong

Hello,
I was wondering whether usage of B1 queries could not help to solve this requirement.
Are there any other specific requirements on structure of the report, sorting, filtering, selection criteria, print layout templates?
In which business situation, customer would like to utilize these reports? What are his/her needs?
Thank you.
Peter Dominik
SAP
B1 Product Definition

DTW for exporting business partners and Items

Hi all,
Can any one tell me how to work on DTW for exporting business partners and Items. groups,subgroups and properties feilds are required, iam on pl5
thanks in advance
regards,
kumar

Hi Kumar
For details on the format for the DTW go to your SDK installation folder for SAP Business One. You will find a Help folder and select the file REFDI.CHM
This file will give you help on the DI API which are the rules applied to the DTW as well. Under contents click on the plus next to objects. This will list all the objects (templates in DTW) available. Select an object and look at the members. There is a detailed explanation next to each member that will tell you whether or not it is mandatory and what the SAP field name is in brackets. If you click on a member name it will display more details on that member and under Syntax if you select the member name that is underlined, it will give you a list of options if applicable for that field. For example when clicking on CardType you will see the options are cCustomer, cSupplier and cLid.
Hope this helps
Kind regards
Peter Juby

Is the license terms allow you to generate pages using Wizzard Business Catalyst and publish them on other servers. As the export side and run?

Is the license terms allow you to generate pages using Wizzard Business Catalyst and publish them on other servers. As the export side and run?

Our iPads work just fine behind a firewall and the Lightspeed filtering solution in an education environment. If your proxy solution cannot be configured to support IOS maybe you should be looking at another vendor. Products such as 8e6 and Lightspeed can be deployed without the use of a traditional proxy set up.
http://www.m86security.com/products/web_security/m86-web-filtering-reporting-sui te-deployment.asp
http://www.lightspeedsystems.com/products/Web-Filter.aspx

Business Partners and Qualifications

My customer is intending to use Business Partners (BUP003 - Employee) to represent resources in the MRS (Multi Resource Scheduling) application. My challenge is that I am unable to assign a qualification to a Business Partner (BUP003) using transaction PPPM. I get a message saying "Unable to display a profile for object 'BP'." What is strange about this is that I can assign a qualification to a Business Partner in my company system but not the customer. So far I have been unable to figure out what the difference is between the two systems that might be impacting on this.
The other strange thing I have come across is that in one of the customer systems I can search and display a list of Business Partners but in another, when I search, I get a message telling me that "the search has not produced any hits". In the system "with no hits" I can see the BP record and I can assign it to a Position so I know it's there, I just can't display in in the list. Weird...
I'm a PM/MM person with little Business Partner experience so any help would be appreciated.
Thanks,
Mark

Hi Mark,
In table T778V, for relationship 032, click on Allowed Relationships on the left hand panel under Links. You will have to uncheck the values in column Not maint. against BP with Q and Q with BP. This will then allow you to maintain qualifications for relationship 032 using transaction PP01/PP02, not PPPM.
Regards,
Priya.

Business Partners and Sales Document

Hi experts, I have a quistion for you all. Consider the following scenario: I have one opportunity with multiple sales team members assigned to it as well as multiple competitors. Can I view this information in BW a BW report, e.g. per Opportunity, show me all Sales Team members or all competitors? If so, can I leverage existing PSA's and ODS's? Thanks in advance for your replies, Tiest.

Arun, I am not a BW expert at all but I have various one-to-many relationships on the Opportunity header and it's assigned business partners. Using the standard reporting I should be able to see all Sales Team Members, Competitors or whatever BP Roles I am assigning? Thanks again for your time and knowledge, Tiest.

Use of Business Systems and Technical Systems

Hi
What is the use of having business systems and technical systems in SAP XI. I don't see any configuration details needed to create these. I understand that it logically divides the interfaces into different business systems but is that the only use? The only place I see the real configuration done is in the adapter configuration.
Vijay

Vijay,
The technical system actually works better for our non-SAP systems than the SAP systems. Here is our scenario:
We have an AS400 business system that uses a file adapter to send files to XI and then uploaded to SAP ECC. The file adapter does not ask for the system information so we can switch between dev and test by changing the DNS address in the technical system entry (dynamic reference like a property file lookup). The communication channel settings do not have to change.
The receiver is SAP using an RFC adapter which requires the system ID, and client (hard coded). Everytime we change clients, we have to change the settings in the RFC adapter. This is more to your point of why do we have a technical system if we have to provide the settings in the adapter as well. The RFC adapter should read the application server and client values from it's parent business system so the changes don't have to be made everytime we point to a new client( such as QA). This is irritating.
So maybe the theory is good but the implementation could be better in this case.
Thanks,
Troy

[Special Prices for Business Partners] and [Hierarchies and Expansions]

Dear Sirs,
I am running into three problems.
1.) I loaded 313 items Special Prices by DTW however I can not locate where it went?
I searched via the path [Inventory>Price Lists>Special Prices>Special Prices for Business Partners]but find nothing in there.
2.) I can not find DTW templates for Hierarchies and Expansions data load.
Also I searched via the path [Inventory>Price Lists>Special Prices>Hierarchies and Expansions] to see if the Special Prices I loaded with DTW maybe there but find nothing there.
3.) I can not find any information related to Hierarchies and Expansions in the [diapi] help file.
Could it be these two functionalities require "manual" input?
If so, how on earth the 313 Special Prices DTW data load went through "successfully" and find no trace of it?
I am pulling my hair off to find some advice.
Would appreciate it greatly if someone could enlighten me on these two functionalities.
Kuni - Tokyo
Edited by: furuya kunitomo on May 15, 2009 2:28 PM

Hi Kuni,
To quickly answer your questions:
1.) I loaded 313 items Special Prices by DTW however I can not locate where it went?
The path is correct. If you can't find anything probably something went wrong in the DTW import.
Check that the "Test Run" checkbox was not checked and all required keys are entered in the templates.
2.) I can not find DTW templates for Hierarchies and Expansions data load.
The relevant templates are:
SpecialPrices.xlt
SpecialPricesDataAreas.xlt
SpecialPricesQuantityAreas.xlt
the default location when installing DTW is:
C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oSpecialPrices
When entering Hierarchies and Expansions (renamed to Period and Volume Discount in Version 2007) you must enter *x for CardCode where x is the price list number.
3.) I can not find any information related to Hierarchies and Expansions in the diapi help file.
The information in the DI API file is under the SpecialPrices Object.
See below some general information regarding special prices:
SpecialPrices is a business object part of the Inventory and Production module under
Select Inventory > Price Lists > Special Prices > Special Prices for Business Partners.
OR
Select Inventory > Price Lists > Period and Volume Discount (Hierarchies and Expansions in previous versions)
Interesting points:
Source table: OSPP
DTW Template: SpecialPrices.csv
Mandatory fields in SAP Business One: CardCode and ItemCode.
PriceListNum is a foreign key to the PriceLists object - source table OPLN, field name ListNum.
CardCode is the Business Partner CardCode to enter Special Prices for Business Partners.
Child object of the SpecialPrices Object: SpecialPricesDataAreas (source table: SPP1)
DTW Template: SpecialPricesDataAreas.csv
LineNum (Field name LINENUM) - Always enter the appropriate LineNumber you want to update (starts from 0).
Child object of the SpecialPricesDataAreas Object: SpecialPricesQuantityArea (source table: SPP2)
DTW Template: SpecialPricesQuantityAreas.csv
LineNum (Field Name SPP2LNum). Always enter the appropriate LineNumber you want to update (starts from 0).
Hope that information helps a little. If you have any fruther questions enter the following information:
1. SAP Business One Version including Patch level
2. Do you get any error message after the import? What is the message returned?
Kind Regards,
Friederike Mundt
SAP Business One Forums Team

DTW Import Business Partners and Contacts

Hallo,
I want to do an import via DTW for the Contact of the Business Partners. The Business Partners were loaded via the Import Excel in SBO. I created two files using the templates. For the BP file I only want link the Contact Persons. With the Contact person file, the Contact persons are loaded.
Using these file gives me the message that the client number already exists. That is correct, I only want to ad contact persons. Where is the missing link in my files? My BP numbers are starting with.30000.
MY BP files can be found on:
ftp.rikas.nl
user: sbo
password: sbo

hello M. Meulendijk,
you need the Update of Business Partners template of DTW. you found this templates in C:\Program Files\SAP Manage\Data Transfer Workbench\Templates\Data preparation examples\20. TestCase2_Test Data for update function\BusinessPartners
if u wish i can send you the templates. just give your email address.
your ftp does not work, invalid password.
hope it helps..
FIDEL

Integrating Business Partners and Vendor

Hi,
We are able to get a synchrnization between our HR and Business partner, as and when we are creating a new employee it's creating a corresponding Business partner for that. I also checked that both the employee and Business Partner for that employee are in sync i.e. if we are updating anything using PA20 for the employee it will also get updated in the corresponding Buisness Partner. We achieved this by doing the configuration settings that will link Employee and Business Partner. Now the issue is we want to have a corresponding vendor also as soon as a business partner is created for an employee, so this means that we want to link Business Partner to Vendor. We tried to look in the following notes but still it's not creating a vendor when a Business Partner is getting created.
954816
956054
So can you please help us in this.
Thanks,
Rajatg

Hi,
If the same can be linked through HR and Vendor by giving in the vendor master the employee number the same can be integrated indirectly to business partner and vendor.
Regards,
Gokul

Change documents optimization Business Partners and Products

Hello guru's
Does anyone know if it is possible for the objects Business Partner and Products to make settings on which changes are recorded in the change documents and which are not?
e.g. I want a change in the field "Last Name" to be recorded in a change document but if a change is made in the field "House number" I don't want it to be recorded in a change document.
Anyone know if this is possible in standard SAP? We are now on 5.2, but will be on 7.0 in a short time.
Thnx for the help!
Joost

Hi, Joost
I think it's possible.
First, Check this program changedocu_read and these tables: CDHDR, CDPOS, DBTABLOG.
Denis.

ALE: setting up reduced IDoc type for use in 4.7 and ERP 2005 problem

I need to set up a reduced HRMD_A message type and then use it to send HR data from a 4.7 system to an ERP 2005 system.
To define the reduced type in both systems I use transaction BD53 (Idoc reduction maintenance).
The problem is that the transaction offers HRMD_A06 as the basic type on a 4.7 system and HRMD_A07 on ERP 2005. Thus i cannot set up identical definitions.
I suppose I should 'step back' to A06 at the ERP 2005 system somehow, but where to look for?..
Thank you in advance!

The table is maintained with BD69 - Assignment of message type to IDOC type.
In my case I added one line with values:
Message type: {my reduced message type}
Basic type: HRMD_A06
Extension: {my HRMD_A06 extension}
Also it looks like there is another (better?) way of making the assignment. It is done with WE82, described in sap help here http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b7db043d711d1893e0000e8323c4f/frameset.htm and also discussed in this topic.
SAP ERP Human Capital Management (SAP ERP HCM)

MRS (Multi Resource Scheduling) - Using Business Partners

In a previous (long) thread I had asked about using Business Partners and the problem I was having assigning work to a BP. I keep getting the error message "no work center found for resource". I was told that to fix this problem I was told "... For the work center error, all you need to do is deactivate the work center checks. Yes, these checks make relevance when HR is active. Check the IMG: Sources of Demand -> Orders -> Activate Additional Checks When Saving Order Here you can deactivate the work center checks."
I deactivated the work center checks in the specified MRS IMG item but I still get the "no work center found for resource" error. Any other suggestions?
Mark

Hi Mark,
Oops !! I am sorry ...
The old solution (deactivate the additional check) works only while integration.
You should deactivate here:
Sources of Demand --> Orders --> Control Integration Between MRS and PM/CS
Here, in the frame "Backward Integration" activate "No backward integration" for work center.
This should surely help.
Regards
Varun.

Idoc DEBCOR - Extend use to Business Partners and customise

Similar Messages

Maybe you are looking for